Repairing work of Obstacle course for Ncc cradets Training in NCC Acedemy at Jeetnagar, Dist. Narmada

Name of Work : Repairing work of Obstacle course for Ncc cradets Training in NCC Acedemy at Jeetnagar,

BILL OF QUANTITIES

Item Description of Item (with brief specification and reference to book of

No. specifications) Quantity Unit Rate Amount

1 Providing, supplying and fixing Straight Balance Wooden Plank Obstacle for NCC

Cadets' Training Course, consisting of a seasoned hardwood plank of size 13.70 m

long × 100 mm wide × 75 mm thick, mounted on adequately designed MS/wooden

support posts at a height of 450 mm above ground level, including excavation for

foundations, PCC/RCC foundation blocks, fabrication and erection of supports, nuts,

bolts, clamps, welding, cutting, painting/polishing of wooden surfaces, one coat of 4.00 Nos. 29994.98

primer and two coats of synthetic enamel paint on steel members, backfilling,

dressing of ground, testing for stability, and all labour, materials, tools, tackles,

transportation and incidentals required to complete the work in all respects as per

approved design and directions of the Engineer-in-Charge.

2 Providing, supplying and fixing Straight Balance Wooden Plank Obstacle for NCC

Cadets' Training Course, consisting of a seasoned hardwood plank of size 5.50 m long

× 100 mm wide × 75 mm thick, free from cracks, splits and other defects, machine

dressed and smoothly finished, mounted on adequately designed and fabricated MS

or hardwood support posts at a uniform height of 450 mm above finished ground

level. The work shall include excavation for foundations, providing and laying

PCC/RCC foundation blocks, fabrication, erection and alignment of support

structures, supply and fixing of all necessary nuts, bolts, washers, clamps, anchor

fasteners, welding, cutting and fitting works. The item shall also include one coat of 4.00 Nos. 16889.22

approved red oxide primer and two coats of synthetic enamel paint on all exposed

steel members, application of approved wood preservative and protective polish on

wooden surfaces, backfilling and compaction around foundations, dressing and

levelling of surrounding ground, testing for stability and safe usage, and all labour,

materials, tools, plants, tackles, transportation, loading, unloading and incidental

works necessary to complete the work in all respects as per approved design and

directions of the Engineer-in-Charge.

3 Providing, supplying and fixing Straight Balance Wooden Plank Obstacle for NCC

Cadets' Training Course, consisting of a seasoned hardwood plank of size 3.70 m long

× 100 mm wide × 75 mm thick, free from cracks, splits and other defects, machine

dressed and smoothly finished, mounted on adequately designed and fabricated MS

or hardwood support posts at a uniform height of 450 mm above finished ground

level. The work shall include excavation for foundations, providing and laying

PCC/RCC foundation blocks, fabrication, erection and alignment of support

structures, supply and fixing of all necessary nuts, bolts, washers, clamps, anchor

fasteners, welding, cutting and fitting works. The item shall also include one coat of 4.00 Nos. 13532.99

approved red oxide primer and two coats of synthetic enamel paint on all exposed

steel members, application of approved wood preservative and protective polish on

wooden surfaces, backfilling and compaction around foundations, dressing and

levelling of surrounding ground, testing for stability and safe usage, and all labour,

materials, tools, plants, tackles, transportation, loading, unloading and incidental

works necessary to complete the work in all respects as per approved design and

directions of the Engineer-in-Charge.

4 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- Graded

brick bat aggregate 40mm normal size) and curing complete excluding cost of 3.00 Cum 3070.10

formwork in (A) Foundation and Plinth

5 Brick work using common burnt clay building bricks having crushing strength not less

than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 - 51.50 Cum 4279.98

fine sand)(B) Conventional

6 Half brick masonry in common brunt clay building bricks having crushing strength not

less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in 140.00 Sqmt 640.77

foundation and plinth (B) Conventional

7 20mm thick sand faced cement plaster on walls upto height 10 metres above ground

level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm

thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

8 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats)

to give an required shape even shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered materials.etc complete

9 Painting one coats (excluding priming coat) on previously painted steel and other

metal surface with enamel paint, brushing to give an even shade including cleaning 420.00 Sqmt 59.35

the surface of all dirt, dust and other foreign matter.

10 Earthwork in cuting in all sorts of soil and soft murrum including conveying and

spreading the stuff, embankment as and where directed within 200meters from the 61.60 Cum 137.33

end of the cutting with all required lead and lift.

11 Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete.

12 Demolition of Brick work and stone masonry including stacking of serviceable

materilas and disposal of unserviceable materials with all lead and lift. (i) In Lime 51.50 Cum 383.05

13 Demolition and disposal of unserviceable materials with all lead and lift.(i) Lime

14 Dismentaling of wooden floors including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift.

15 Scraping oil paint from steel and other metal surface and making the surface even

(with Hand Scraping.)

16 Steel work, riveted in built up sections framed work including cutting, hoisting, fixing

in position and applying a priming coat of red lead paint. (A) In beams and joists,

channels angles Tees, flats, with connecting plates or angle cleats as in main and 4.00 Quintal 5889.50

cross beams. Hip and jack rafters, purlins conneted to common rafters and the like.

In Word : Eight lakh Eighty-Three Thousand Seven Hundred Ninety-Five Rupees and Seventy-Four Paise Only.

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated rate mentioned

above. Amount of my /our tender works out as under.

* Estimated Amount * Estimated Amount

put to tender put to tender

Deduct :…………% Below Add :………%Above

In Words …………………………………… In Words………………………………

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5 The amount of dismentalled credit materials at Rs. 0 shall be deducted from first R.A. Bill.

6 The Contractor will have to submit the mix design for different grades his own cost befor execution as directed and to be approved From the

Engineer In Charge.

Deputy Executive Engineer Executive Engineer

Rajpipla (R&B) Sub-Division Rajpipla (R&B) Division

Rajpipla Rajpipla