Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.9 LAccepted-AOC SIDDHARTH ENCLAVE NEAR JINDAL FACTORY RAMNAGAR ROORKEE 247667 | HARIDWAR | UTTARAKHAND | 247667 | ₹24.9 L | L1 | Accepted-AOC Acceptance of Contract |
| 2 | L2₹27.2 L+₹2.3 L (9.18%)Rejected-AOC | ₹27.2 L+₹2.3 L (9.18%) | L2 | Rejected-AOC Ok |
| 3 | L3₹29.4 L+₹4.5 L (18.0%)Rejected-AOC 3RD FLOOR VVIP RESIDENCY MAHINDER VIHAR CHAKRATA RD NEAR RAMADA HOTEL DEHRADUN UTTARAKHAND 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | ₹29.4 L+₹4.5 L (18.0%) | L3 | Rejected-AOC Ok |
| 4 | L4₹30.6 L+₹5.6 L (22.5%)Rejected-AOC | ₹30.6 L+₹5.6 L (22.5%) | L4 | Rejected-AOC Ok |
| 5 | L5₹31.1 L+₹6.1 L (24.6%)Rejected-AOC | ₹31.1 L+₹6.1 L (24.6%) | L5 | Rejected-AOC Ok |
| Sl No | Description | Qty | Unit | DHEER ENGINEERING L3 | M/s Kang Builders & Developers L5 | Bhanu Prakash L4 | RAMSONS DEVELOPERS L2 | PANTECH INSTRUMENTS AND SERVICES L6 | anant enterprises L1 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Labour only for lifting /taking up of defective submersible pumping set of capacity 60 HP to 100 HP from deep tube well and dismantling of connected rising main i.e. non return valve, bend etc from delivery of pump set, lifting of column pipe of size 150 mm dia fixed with pumping set, unscrewing of column pipes from socket / flange cutting of welded strip unscrewing of cable holding clamps and disconnecting of submersible cable joint complete all as directed by EIC. | 5 | Each Job | 11,100 ₹55,500 | 24,000 ₹1,20,000 | 11,000 ₹55,000 | 10,000 ₹50,000 Lowest | 28,000 ₹1,40,000 | 15,000 ₹75,000 |
| 2.00 | Labour only for lowering of submersible pumping set of capacity 60 HP to 100 HP after repair and testing in deep tube well not less than 90 mtr below the ground level including lowering of column pipe size 150 mm dia by screwing with socket/flange welding or fixing MS strips, fixing of cable clamps etc up to the maximum depth of 150 mtr all as directed by EIC.
Note:
(i) Jointing material will be measured and paid separately.
(ii) Repair of column pipe will be measured and paid separately.
(iii) Contractor shall caution his staff during execution to take maximum precaution while lifting/lowering the pump set at site. In case any accident/injuries occurs the department will not held responsible for any miss happening due to negligence on their (workers) parts. Contractor shall be held totally responsible and all penalty /damages on this account shall be born by the contractor.
(iv) Old material retrieved during lowering /lifting the contractor shall deposit to MES store yard without any extra cost. | 5 | Each Job | 11,100 ₹55,500 | 24,000 ₹1,20,000 | 12,000 ₹60,000 | 10,000 ₹50,000 Lowest | 28,000 ₹1,40,000 | 15,000 ₹75,000 |
| 3.00 | S&F of Cable jointing kit ( compound ) suitable for submersible cable of size up to 50 sqmm 3 core. | 5 | Each | 2,100 ₹10,500 | 1,000 ₹5,000 Lowest | 1,500 ₹7,500 | 4,000 ₹20,000 | 1,500 ₹7,500 | 1,000 ₹5,000 Lowest |
| 4.00 | M&L for repair to column pipe 150 mm dia having wall thickness 5 mm and 3 mtr long including transportation to workshop, cutting , threading , fabricating welding of same along with S&F MS flange of 8 mm thick having 150 mm bore dia and 8 Nos hole of 5/8” dia for fixing of nut and bolts on the both ends of the column pipe and welding the same to the pipe by means of MS strips of size 25 x 6 mm on four side of the flanges all as directed by EIC including transportation from workshop to site and stacking at site after repair complete all as specified and directed
Note: In case any damage or loss of any pipe is noticed during transportation or in custody of the contractor the necessary recovery shall be effected from contractor’s due to this regard | 5 | Each job | 1,200 ₹6,000 | 1,000 ₹5,000 Lowest | 1,500 ₹7,500 | 2,000 ₹10,000 | 5,000 ₹25,000 | 1,500 ₹7,500 |
| 5.00 | M&L rubber packing suitable for 150 mm dia flange 3 mm thick | 100 | Each | 39 ₹3,900 Lowest | 80 ₹8,000 | 90 ₹9,000 | 200 ₹20,000 | 80 ₹8,000 | 50 ₹5,000 |
| 6.00 | M&L in repair for overhauling of submersible motor 75 HP to 100 HP AC 3 phase by dismantling , opening into parts cutting of burnt winding, cleaning of slots, balancing of rotor, cleaning polishing and rewinding with same gauge of PVC insulated copper wire & testing all as specified & directed by Engr-in-Charge.
Note : Spare parts shall be measured & paid separately | 5 | Each job | 45,000 ₹2,25,000 | 35,000 ₹1,75,000 Lowest | 38,000 ₹1,90,000 | 50,000 ₹2,50,000 | 55,000 ₹2,75,000 | 45,000 ₹2,25,000 |
| 7.00 | Supply only Thrust plate suitable for 75 HP to 100 HP submersible motor as per existing type and size. | 5 | Each | 2,700 ₹13,500 | 1,500 ₹7,500 | 3,000 ₹15,000 | 4,500 ₹22,500 | 1,000 ₹5,000 Lowest | 3,000 ₹15,000 |
| 8.00 | Supply only Thrust pad suitable for 75 HP to 100 HP submersible motor as per existing type and size. | 5 | Each | 1,700 ₹8,500 | 1,000 ₹5,000 Lowest | 4,000 ₹20,000 | 4,500 ₹22,500 | 1,000 ₹5,000 Lowest | 3,000 ₹15,000 |
| 9.00 | Supply only Bearing bush lower suitable for 75 HP to 100 HP submersible motor as per existing type and size. | 5 | Set | 1,800 ₹9,000 | 600 ₹3,000 Lowest | 1,500 ₹7,500 | 2,500 ₹12,500 | 1,200 ₹6,000 | 2,000 ₹10,000 |
| 10.00 | Supply only Bearing bush upper suitable for 75 HP to 100 HP submersible motor as per existing type and size. | 5 | Set | 1,800 ₹9,000 | 600 ₹3,000 Lowest | 1,500 ₹7,500 | 3,000 ₹15,000 | 800 ₹4,000 | 2,000 ₹10,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
19 May 2026, 6:00 pmClosed
GE IMA Dehradun
GE IMA Dehradun
REPAIR AND MAINTENANCE OF LOWERING AND LIFTING OF SUBMERSIBLE, CENTRIFUGAL, MONOBLOCK PUMP SETS, SWIMMING POOL FILTER PLANT, ROUTINE MAINT OF SWIMMING POOLS INCLUDING CONNECTED WORKS AT GE IMA DEHRADUN
2026_MES_762560_1
GE/IMA/T-29 OF 2026-27 9659/E8
Open Tender
Civil Works - Water Works
Item Rate
180 days
GE IMA Dehradun
As per tender docus/NIT
6 documents required · 6 mandatory
₹500
Yes
GE IMA Dehradun
₹90,000
Yes
22 Aug 2026
28 Apr 2026
26 May 2026
28 Apr 2026
19 May 2026
12 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Labour only for lifting /taking up of defective submersible pumping set of capacity 60 HP to 100 HP from deep tube well and dismantling of connected rising main i.e. non return valve, bend etc from delivery of pump set, lifting of column pipe of size 150 mm dia fixed with pumping set, unscrewing of column pipes from socket / flange cutting of welded strip unscrewing of cable holding clamps and disconnecting of submersible cable joint complete all as directed by EIC. | 5 | Each Job | - | - |
| 2 | Labour only for lowering of submersible pumping set of capacity 60 HP to 100 HP after repair and testing in deep tube well not less than 90 mtr below the ground level including lowering of column pipe size 150 mm dia by screwing with socket/flange welding or fixing MS strips, fixing of cable clamps etc up to the maximum depth of 150 mtr all as directed by EIC.
Note:
(i) Jointing material will be measured and paid separately.
(ii) Repair of column pipe will be measured and paid separately.
(iii) Contractor shall caution his staff during execution to take maximum precaution while lifting/lowering the pump set at site. In case any accident/injuries occurs the department will not held responsible for any miss happening due to negligence on their (workers) parts. Contractor shall be held totally responsible and all penalty /damages on this account shall be born by the contractor.
(iv) Old material retrieved during lowering /lifting the contractor shall deposit to MES store yard without any extra cost. | 5 | Each Job | - | - |
| 3 | S&F of Cable jointing kit ( compound ) suitable for submersible cable of size up to 50 sqmm 3 core. | 5 | Each | - | - |
| 4 | M&L for repair to column pipe 150 mm dia having wall thickness 5 mm and 3 mtr long including transportation to workshop, cutting , threading , fabricating welding of same along with S&F MS flange of 8 mm thick having 150 mm bore dia and 8 Nos hole of 5/8” dia for fixing of nut and bolts on the both ends of the column pipe and welding the same to the pipe by means of MS strips of size 25 x 6 mm on four side of the flanges all as directed by EIC including transportation from workshop to site and stacking at site after repair complete all as specified and directed
Note: In case any damage or loss of any pipe is noticed during transportation or in custody of the contractor the necessary recovery shall be effected from contractor’s due to this regard | 5 | Each job | - | - |
| 5 | M&L rubber packing suitable for 150 mm dia flange 3 mm thick | 100 | Each | - | - |
| 6 | M&L in repair for overhauling of submersible motor 75 HP to 100 HP AC 3 phase by dismantling , opening into parts cutting of burnt winding, cleaning of slots, balancing of rotor, cleaning polishing and rewinding with same gauge of PVC insulated copper wire & testing all as specified & directed by Engr-in-Charge.
Note : Spare parts shall be measured & paid separately | 5 | Each job | - | - |
| 7 | Supply only Thrust plate suitable for 75 HP to 100 HP submersible motor as per existing type and size. | 5 | Each | - | - |
| 8 | Supply only Thrust pad suitable for 75 HP to 100 HP submersible motor as per existing type and size. | 5 | Each | - | - |
| 9 | Supply only Bearing bush lower suitable for 75 HP to 100 HP submersible motor as per existing type and size. | 5 | Set | - | - |
| 10 | Supply only Bearing bush upper suitable for 75 HP to 100 HP submersible motor as per existing type and size. | 5 | Set | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
Genpage29.pdf
Tender Documents • 0.32 MB
PSandMakes29.pdf
Additional Documents • 0.98 MB
BOQ_854180.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .