GENERAL PWD Rest house Kattakkada Balance works Electrical installations General Electrical Work

Amount

Electrification

OD189080/2024-2025:Supply, Conveyance ,Installation,Testing and Commissioning of Four pole AC 125A, 50 Hz,415V LK C-Line Enclosed Automatic Transfer Switch (ATS) along with Aux C 2000 controller having protection from UV/OV, Single phasing, Phase sequence and Frequency with Complete protection,5 key s navigation keypad for parameters setting,4 LEDs for plant synoptic (source line and ATS status) ,2 LEDs for alarm presence and AUTO mode active 128x 80 pixel, Backlit LCD screen with 4 Grey levels,Management of generator set start-stop & cooling cycle Management of automatic test for generators with emergency and rotation conforming to IS/IEC 60947-3, EN 60947-3 IS/IEC 60947-6-1, EN 60947-6-1 in company fabricated enclosed cubicle panel including drilling holes in cubicle panel, making connections, etc. as required. LK or equivalent make

OD189078/2024-2025:Supply and providing the following size of B class MS pipe conforming to relevant IS specifications complete with heavy gauge specials such as bends, flanges etc welded and fixed at appropriate locations, providing cork sheet in between the flanges at the joints, bolting the flanges together, painting the pipe, flange etc with 2 coats of heat resistant paint suitable for outdoor applications, fixing the pipe firmly with fabricated structure/wall/any other mechanical support etc as required.- 80 mm dia B class MS pipe as extended exhaust pipe.

OD189079/2024-2025:Exhaust pipe/muffler cladding: Supply and fixing 65mm thick resin bonded fiber glass wool having density of 48kg/m3 for thermal insulation and totally covered with a layer of chicken mesh and finally applying 0.63mm aliminium sheet cladding complete as required on the existing C class MS pipe of 80mm dia/muffler of DG exhaust

90.12.5.28:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 35 sq mm

90.12.7.28:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp

9.1.21:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)

OD194875/2024-2025:Supply and filling of Diesel

OD187192/2024-2025:Supply and fixing Conveyance, installation, testing and commissioning of 2000 lumen round/square recess type fitting made of poly carbonate body , having efficacy not less than 110 l/w, recessed on ceiling including hole cutting charge and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required as per direction by the engineer in charge.

OD189720/2024-2025:Supply and fixing Conveyance, installation, testing and commissioning of 1200 lumen round/square recess type fitting made of poly carbonate body , having efficacy not less than 110 l/w, PHILIPS make:DM296B LED12 S-4000K/6500K PSU WH or equivalent recessed on ceiling including hole cutting charge and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required as per direction by the engineer in charge.

OD187235/2024-2025:Supply and fixing Conveyance, installation, testing and commissioning of 1200 lumen round/square surface fitting made of poly carbonate body , having efficacy not less than 110 l/w, PHILIPS make:SM250/260 LED12 S-4000K/6500K PSU WH or equivalent directly on ceiling and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required as per direction by the engineer in charge.

OD189783/2024-2025:Supply, conveyance installation testing and commissioning of the following crown type ceiling light dimension 360mmx100mm,with 12 W full glow LED bulb ,4000K NW colour LED light fittings made of material aluminium body silver colour with all accessories etc. directly on ceiling with suitable clamps neatly painted and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS .Philips make model no.crown type ceiling light model no:581899 or it's equivalent.

OD266346/2024-2025:Supply and fixing of 40W LED Post top lamp luminaire suitable for Gate light applications directly on the existing wall and giving connections with the existing wiring etc as required. Model No: Crompton make LPTO-40-WW/M Maple Decorative 40W Gate light or its equivalent.

OD188483/2024-2025:Supply Conveyance, installation , testing and commissioning of exhaust fans of size 225 mm sweep Light Duty Exhaust fan in metal frame working on 230 V A/C single phase A/C existing opening, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan.

OD275219/2024-2025:Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

OD262525/2024-2025:Supply, conveyance, installation, testing and commissioning of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.(Usha Fontana Maple 1250mm 5 Blade ceiling fans (Antique Brass,) or equilent (VIP Bed room)

OD189303/2024-2025:Supply, Conveyance, installation, testing and commissioning of LED step Light 3 W,85 lumen,3000K 50 Hz,230 V, Philips make: model no:34152 ,220-240V, IP67/IK10 or equivalent with all accessories and giving connections as required

OD189607/2024-2025:Supply , Conveyance, installation, testing and commissioning of the following type surface/ Wall mounted Pressure Die cast Housing LED Bulkhead with IP66 protection directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required. EbduraLED Bulkhead, Model No.WT202W LED6S CW PSU S3 PC of M/s Philips or equivalent.

OD189784/2024-2025:Supply, conveyance, installation, testing, and commissioning of a mirror LED light with a wattage of 10W and a luminous efficacy of 1000 lumens per watt, having dimensions of 300x65x130 mm. The light features a body made of MS with a polycarbonate diffuser and a chrome finish. The scope also includes making the necessary electrical connections as required. (Model No. Philips 582109 or equivalent).

OD189182/2024-2025:Supply, conveyance, installation, testing and commissioning of Wall light, body made of shiny stainless steel base & glass opal paint finish. Dimensions:- L125XW150XH240) with E27 base type 12W Warm/neutral white full glow LED bulb and top side of wall light provide transparent Glossy Clear Acrylic Sheet with suitable dimension also giving connections as required. make: Model No. Philips 58070 Patina 1 head wall light or Techno commercial equivalent approved by engineer in charge.

OD195126/2024-2025:Supply, conveyance, installation, testing and commissioning of Wall light, body made of Metal body Color Chrome . Dimensions:- L270XW130XH310) with B22 base type 9W Warm/neutral white full glow LED bulb and top side of wall light provide transparent Glossy Clear Acrylic Sheet with suitable dimension also giving connections as required. make: Model No. PHILIPS 34302 STYLO 1 HEAD WALL LIGHT or Techno commercial equivalent approved by engineer in charge

OD197513/2024-2025:Supply, conveyance, installation, testing and commissioning of 35W,4300 lumen Pressure die cast aluminum body ,Optic material Poly carbonate, Mounting Eye-Bolt type . Dimensions:- H154x150mm, Aluminum and gray colour body with Surge Protection (Common/Differential) 4/4 kV,Color rendering index (CRI) >80 fixing with suitable clamp also giving connections as required. make: Model No. PHILIPS DuraLed Pro BY202P LED 43S CW PSU PC SPD LILO or Techno commercial equivalent approved by engineer in charge

90.5.1.3:Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Ding dong bell

OD290541/2024-2025:Supply installation testing commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter, 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x12mm suitable for wind speed as per IS 875 Part III double arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junctions box etc.complete 5 Meters

OD290542/2024-2025:Supply Conveyance, installation, testing and commissioning of 80W LED Flood light output greater than 110lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 10 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.2:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.2 way 5/6 amps switch

1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.6:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet

1.24.7:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet

1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

OD195178/2024-2025:Supplying and fixing following one module USB charger port on the existing modular plate & switch box including connections but excluding modular plate etc. as required.combined twin USB charger

1.48:Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

1.51:Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes

1.55.1:Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A

1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required.

OD195313/2024-2025:Supply and providing 9W LED Bulb in the existing angle/ straight batten holder.

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels

14.8:Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

14.9:Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

OD194948/2024-2025:Supply and drawing of 1 no 1.5 sq.mm 6 core PVC/ XLPE insulated armoured control cables with copper conductors for working voltages up to and including 1100 V conforming to IS 1554 part I 1988 for PVC and IS 7098 Part I for XLPE with the cables, one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required

OD194949/2024-2025:Supply, laying and clamping of 1 no. 1.5 sq.mm 6 core PVC / XLPE insulated armoured control cables with copper conductors for working voltage up to and including 1100 V conforming to IS 1554 part I 1988 for PVC and IS 7098 Part I for XLPE, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required

9.1.1:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)

90.14.7:Supply and providing copper earth bus in the panel board

90.12.10.3:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation63/50 mm or nearest size

90.12.9.3:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench63/50 mm or nearest size

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

1.24.8:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Bell push

1.26:Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

OD193664/2024-2025:Providing and fixing of fully solid 2m Vertical Air terminal made up of Semi-hard (E-AlMgSiO5), 16mm rod tapered to 10mm.

OD193624/2024-2025:Providing and fixing of fully solid 4m Vertical Air terminal made up of Semi-hard (E-AlMgSiO5), 16mm rod tapered to 10mm.

OD193625/2024-2025:Providing and fixing of Interception Tip made up of Semi-hard (E-AlMgSiO5) to provide on the top of Vertical Air Terminal.

OD193626/2024-2025:Providing and fixing of Stainless Steel SS 304 Wall Clamp to mount Vertical Air Terminal. Cape-WC 16 SS or equivalent

90.16.3.17:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)20 x 3 mm aluninium strip

90.16.4.14:Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).20 x 3 mm aluminium strip

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD278201/2024-2025:Supply, installation, and commissioning of Double Conversion Online UPS 1KVA Single phase in and out with the following specifications; IP20,THD<10% Input pf =0.99@ full load with input voltage range 140-280V , 50Hz Single Phase, Output 230V, 50Hz Single phase, It shall be 100% generator compatible, with Efficiency > 90% and output power factor unity ( 1kVA= 1kW), Pure sine wave. Battery over charge & under charge cut off, built in Bypass arrangement , LED +LCD Display and including all accessories etc. as required. The system shall have IGBT rectifier and inverter, warranty 3 years for UPS and minimum 4 years for tubular batteries. The unit shall have a minimum VAH of 1800 using tubular C10 batteries including battery rack and interconnecting cables. Make of UPS: Legrand Numeric/ Hykon/ Luminus or equivalent. Make of Battery : Amaron Quanta/ Exide

5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

5.15:Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

OD194959/2024-2025:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.12.7.38:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 4 sq mm with factory made clamp

90.12.5.38:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 4 sq mm

90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm

90.16.1.1:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG)

90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

OD195458/2024-2025:Supply and fixing of water proof (transparent)box(size150x150x100)for fixing Contactor MCB/Isolator with using suitable din channel etc.as required .Hensel or equivalent make

OD195459/2024-2025:Supply and Fixing the modular 32A mains on-off with key tag switch in the with front plates and giving necessary connections as required

1.10.2:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B

OD197556/2024-2025:SITC of LED tube light on ROUND BLOCK, 1200 mm LED (TMC100) lamps tube light fittings made of CRCA with 0.5mm thickness complete with all accessories and double side pin type single piece indoor LED Tube ,poly carbonate body (cool white at 6500 K temperature ) 1200 mm, G13 base 18 w with extruded aluminum heat sink with nominal system level lumen package of min 2100 Lumen having efficiency of minimum 115 lumen/watt,(Philips make MASTER LED tube 1200 mm 865 T8I-2100 lumen) Inbuilt Driver with THD <10%, power factor >0.95, RoHS compliant, suitable for use 140~280V AC 50 HZ AC supply. etc and extruded Aluminium heat sink etc . The light should have minimum 70% of light at 40000 Hr life time as per relevant NABL Accreditation certification(LM 70& 80). Fittings directly fixed on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.

2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.16:Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

OD198812/2024-2025: Charges for preparation of Electrical/fire Drawing per A3 sheet first copy

OD198811/2024-2025:Copying charges of Electrical/fire Drawing per A3 sheet additional copies

OD198816/2024-2025:Supply and installation of ABC type fire extinguisher of 4 kg. Capacity complete with initial charges and installation brackets confirming to IS15683 with ISI mark .

OD201556/2024-2025:Supply and providing 2.00 mm thick, 3.3 kV, Synthetic elastomeric fire retardant insulating sheet

OD266081/2024-2025:Supply, Conveyance,Testing and Commissioning of vertical wall mounting type 5 star rated 3L 3KW Vertical Instant Water Heater (Geyser), copper container with puff insulation and PVC body working on 230 Volt 50 Hz A/C supply , fixing on wall using suitable size anchor bolt / Screws etc and giving connection of water line and electrical supply. (Racold Altroi+ 3L 3KW Vertical Instant Water Heater (Geyser) White) or its equivalent)

OD266315/2024-2025:Supply and providing 4pole power contactor with necessary NO/NC contacts suitable for light switching arrangements

OD266316/2024-2025:Providing and fixing digital timer switch suitable for switching purpose 110 - 240 VAC 1 Phase - 2W 2 C/O , Base/Din 50 ON/OFF Each mnodel no. AS2DCDS make L&T Astro pro

OD266317/2024-2025:SITC of 25A single pole power contactor for control application and giving connections etc as required. (Legrand or equivalent MR 11W make cat no: 94176)

OD266318/2024-2025:Supply and installation of poly carbonate box 250x150x95 suitable for providing MCB/Isolator/Connector and connections as required

SYNERGY POWER TECH (BID ID -2162312)

SATHEESH KUMAR S (BID ID -2164353)

Bidder Name

D SURESH

SYNERGY POWER TECH

SATHEESH KUMAR S