Loading…
Loading…
Tender ID
Tender Value
₹16.0 L
EMD Value
₹16,020
Closing Date
15 Apr 2026, 5:00 pmClosed
Superintending Engineer (CG), GIDC, Bharuch.
Renovation work of amenity areas at 6th Floor GIDC Office at Sayajigunj Vadodara.
293645
E-Tender Notice No. 10 of 2025-26 Sr. No. 06
Open
Civil Works
Works
Vadodara
2 documents required · 2 mandatory
₹1,062
Executive Engineer, GIDC, Baroda
₹16,020
4 Apr 2026
4 Apr 2026
4 Apr 2026
15 Apr 2026
4 Apr 2026
Item Item Description Unit Quantity Rate Amount
1 Civil :- Demolition of brick work and cu.m 9.00 564.16
stone masonary including stacking of
serviceable materials and disposal of
unserviceable material with all lead & lift
(ii) cement mortar
2 Dismantaling tiled or stone floors laid in Sq.m 239.00 48.91
mortar including stacking of serviceable
materials and disposal of unserviceable
material with all lead & lift
3 Dismentaling sanitary fiitings like Each 18.00 415.79
washbasin, W.C. pan indian and Europian
type flushing tank etc. including stacking
the materials with all lead and lift.
4 Removing dry or oil bound distemper by Sq.m 1119.00 50.55
a washing and scraping and sand
papering the wall surface smooth
including necessary repairs to scratches
5 Constructing a sink (chowkedi) with C.C. Rmt. 6.00 2258.02
1:2:4, 12cm. thick over B.B. masonry in
C.M,(1:6) in front and dwarf wall
Mt.high and 23 cm. thick cement plaster
to masonry/in C.M.1.3) and cement
concrete flooring in 1:2:4: mix 5 cm. dia.
drain pipe etc.complete.
6 Providing and fixing concealed center Rmt. 110.00 170.36
point to wall ceiling & floor CPVC (SDR
13.5) PIPE having National Sanitation
Foundation (NSF) seal for potable water
of following dia. nominal bore tube
fittings and clamps including making
good the wall, ceiling and floor etc.
complete. [A] 15 mm.
7 Providing and fixing concealed center Rmt. 50.00 253.82
point to wall ceiling & floor CPVC (SDR
13.5) PIPE having National Sanitation
Foundation (NSF) seal for potable water
of following dia. nominal bore tube
fittings and clamps including making
good the wall, ceiling and floor etc.
complete. [B] 25 mm.
Signature of Contractor Executive Engineer
8 Providing and fixing concealed center Rmt. 50.00 338.24
point to wall ceiling & floor CPVC (SDR
13.5) PIPE having National Sanitation
Foundation (NSF) seal for potable water
of following dia. nominal bore tube
fittings and clamps including making
good the wall, ceiling and floor etc.
complete. [B] 32 mm.
9 Providing and fixing concealed center Rmt. 50.00 660.58
point to wall ceiling & floor CPVC (SDR
13.5) PIPE having National Sanitation
Foundation (NSF) seal for potable water
of following dia. nominal bore tube
fittings and clamps including making
good the wall, ceiling and floor etc.
complete. [B] 50 mm.
10 Providing and fixing cast iron nahni trap Each 10.00 632.64
of the following dia of self cleaning design
with CI screwed of hinged grating
including cost of cutting and making good
the walls and floors 100 mm inlet and
mm outlet ©100mm Dia.
11 Providing and fixing washbasin with Each 5.00 1418.56
single hole for pillar tape with C.I. or M.S
brackets painted white including cutting
holes and making good the same but
exlcuding fittings (A) Vitreous chine : (ii)
Flat back wash basin 550 mm x 400 mm
size (i) In white colour
12 Providing and fixing C.P. Brass waste for Each 5.00 67.91
wash basin or sink (A) 32 dia
13 Providing and fixing M.I. Fisher union for Each 5.00 78.75
wash basin or sink (A) 32 dia
14 Providing and fixing wsh down water Each 7.00 1336.30
closet (European type, W.C. Pan) with
integral P or S trap including jointing the
trap with soil pipe in Cement Mortar 1:1
(1-Cement: 1-fine sand) (Seal and cover
to be measured and paid for
separately)(A) vitreous China Pattern :(i)
in white colour.
Signature of Contractor Executive Engineer
15 Providing and fixing 12.5 Litres high level Each 7.00 1580.28
C..1 flushing cistern with A pair of C.I. or
Mild steel brackets, womplete with
fittings such as syplionic arrangement,
15mm nominal size brass ball valve with
polythene float, lever G.1. China (60 cm.)
and pull union and couplings for
connections with inlet, outlet and
overflow pipes etc. including cutting
holes in walls and making good the same
(overflow pipe to be measured and paid
fo separately).
16 Providing and fixing in position with Rmt. 7.00 347.51
clamps etc. 32mm nominal internal
diameter galvanised steel tube flush pipe
for high level flushing cistern including
connecting the flush pipe with cistem and
closet and making good the walls and
17 Providing and fixing G.1. inlet connection Each 7.00 39.78
for flush pipe with W.C. Pan.
18 Providing and fixing plastic seat and Each 7.00 291.33
cover for wash down water closer with
C.P. brass hinges and rubber buffers. (B)
Black plastic seal and cover.
19 Providing and fixing screw down bib taps Each 14.00 214.81
of following size (A) Brass screw down
bib tap polished bright. (ii) 20mm dia
20 Providing and fixing pillar tap, capstan Each 10.00 354.69
head, screw down high pressure with
screws, shanks and back nuts. (ii) 20mm
21 Providing and fixing brass screw down Each 12.00 223.81
stop tap. (B) 20mm dia.
22 Providing and fixing chromium plated Each 15.00 254.78
brass half trun flush cock of approved
quality including fixing in pipe line etc.
complete.(1) 20mm dia.
23 Providing and fixing 100mm sand cast Each 5.00 36.98
iron gratting for gully, floor or Nahni
24 Providing and fixing P.V.C. pipes 10 Rmt. 50.00 339.05
kgf/Sq. cm. 1)110mm dia.
25 Providing and fixing Urinal or approved Each 8.00 1062.18
quality including conecting the Urinal
with waste pipe, tap etc. complete. (A)
White earthenware flat back or corner
type size 430mm x 260mm x 350mm.
Signature of Contractor Executive Engineer
26 Providing and fixing 600mm x 450 mm Each 5.00 854.58
bevelled edge mirror of supperior glass
mounted on 6 mm thick A.C sheet or
plywood sheet and fixied to wooden plus
with C.P brass screws and washers.
27 Providing and laying vitrified tiles 8 to 10 Sq.m 57.00 1521.73
mm thick 36" x 36" in flooring treads of
steps and landing laid on a bed of 12mm
thick cement mortar 1:3 (1-cement. 3-
coarse sand) finishing with flush pointing
in white cement.
28 Providing and laying vitrified tiles 8 to 10 Sq.m 226.00 1577.32
mm,inskrting risers of steps and dedo on
10mm thick cement plaster 1:3 (1-
cement: 3-coarse sand) and jointed with
white cement slurry.
29 Distempeing (Two coats) with oil bound Sq.m 221.00 73.70
washable distemper of approved brand
and manufacture and of required shade
on wall surfaces to give an even shade,
over and including a priming coat with
alkali resistance primer of approved
brand after thoroughly brushing the
surface and other foreign matter and also
including preparing the surface even and
sand parpered smooth.
30 Applying two coats of putty & two coats Sq.m 1618.00 40.59
of primer of approved brand and
manufacture on new wall surface to give
an even shade including thoroughly
brushing the surface free from mortar
dropping and other foreign matter and
sand papered smooth.
Providing 20mm thick cement plaster in Sq.m 1790.00 270.20
31 single coat on single or half brick walls
for interior plastering upto floor two
level and finished even and smooth in (i)
Cement mortar 1:3 (1-cement:3-sand)
32 Providing and fixing eco-friendly light Sq.m 100.00 1674.15
weight calcium silicate false ceiling tiles
having Tegular edge & 15 mm Thick
Densified edges on the Tile Periphery for
Extra Strength The Light weight calcium
silicate ceiling tiles shall have, light
reflection 85% non-combustible as per
B.S. 476 part IV, 100% humidity
resistance and also having thermal
conductivity0.043° w/m KC.for the best
thermal Insulation The Light weight
Signature of Contractor Executive Engineer
calcium Silicate tile shall be of approved
texture Fine fissured/ Spintone/Cosmos
having NRC value of 0.5 & Globe having
NRC value of 0.75 NRC or equivalent of
size 595 X 595 mm to be laid on true
horizontal level suspended inter locking
metal grid of hot dipped galvanized steel
sections (galvanizing @120 grams per
sqm including both side) consisting of
main 'T' runner suitably spaced at joints
to get required length and size of
24X38mm made from 0.30 mm thick
(minimum) sheet, 1200mm centre to
centre, and cross 'T' of size 24X28mm
made out of 0.33mm (Minimum) sheet
spaced 1200mm along spaced between
main 'T' at 600mm centre to centre to
form agrid of 1200X600mm and
secondary cross 'T' of length 600mm and
size 24x28mm made of 0.30 mm thick
(Minimum) sheet to be interlocked at
middle of the 1200X600mm panel to
form grid of size 600X600mm resting on
periphery walls/partitions on a
perimeter wall angle pre-coated steel of
size (24X24X3000mm made of 0.40mm
thick (minimum) sheet with the help of
rawl plugs at 450mm centre to centre
with 25mm long dry wall screws @
230mm interval and laying 15mm thick
Densified edges light weight calcium
silicate ceiling tiles of approved texture
(Fine Fissured/Cosmos/Spintone) in the
grid including, cutting /making opening
for services like diffusers, grills, light
fittings, fixtures, smoke detectors etc.,
wherever required, Main 'T' runners to
be suspended from ceiling using G.I.
slotted cleats of size 25X35X1.6mm fixed
to ceiling with 12.5mm dia and 50mm
long dash fasteners, 4mm G.I. adjustable
rods with galvanized steel level clips of
size 85X30X0.8mm, spaced at 1200mm
centre to centre long main 'T' bottom
exposed with 24mm of all T-sections
shall be pre-painted with polyester baked
paint, for all heights, as per specifications,
drawings and as directed by engineer-in-
charge. Note:- Only calcium silicate false
ceiling area will be measured from wall
to wall. No deduction shall be made for
exposed frames/opening (cut outs)
Signature of Contractor Executive Engineer
having area less than 0.30 sqm. The
calcium silicate ceiling tiles shall have
NRC. Value of 0.50 (Minimum) for Fine
fissured/Spintone/Cosmos and 0.75 NRC
for Globe, light reflection 85% non-
combustible as per B.S. 476 part IV,
100% humidity resistance and also
having thermal conductivity. 0.043° w/m
KC.for the best thermal Insulation
33 Providing and laying polished Sq.m 28.00 1149.52
kota/Granite stone slab 25mm thick in
risers of steps, skirting Dedo and pillars
laid on 10mm thick cement mortar 1:3
(1-Cement: 3 coarse sand) and jointed
with gray cement slury mixed with
pigment to match the shade of slab
including rubbing and polishing etc.
34 Providing and fixing five courses water Sq.m 56.00 483.11
profing treatment with bitumen felt
consisting of second and fourth course of
blown / bitumen or/and residual
bitumen applied hot at 1.2 kg.perSq.M.of
area for each course and first course with
fibre base bitunen saturated under lay
type land third course with fibre base self
finished felt type 2 grade 1 and fifth and
final course of stone grit 6mm and down
size or pea sizes gravel spread at
Cu. Metre / Sq. metre including
preparation of surface excluding grading
1 Electrical .Point wiring for Light with Point 30 407.03
2-1.5 sq.mm & earth wire of 1.5 sq.mm
(Green) both are of ISI marked 1.1 KV
grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length , in
below type of pipe erected with 6A
Modular type switch / bell push &
accessories and earth continuity of
following type, erected on PVC /
Metallic/Wooden box, single mounting
base frame covered with
textured/metallic/white front plate
modules erected on / in wall / ceiling as
per pipe erected, with necessary Lamp
holder/ceiling rose / H.D.Connector as
(c ) with Oval Conduit / PVC casing
capping double lock type erected flushed
on wall / celing.Cat- III
Signature of Contractor Executive Engineer
2 Point wiring for Exhust FAN with 2-1.5 Point 4 595.9
sq.mm & earth wire of 1.5 sq.mm
(Green) both are of .ISI marked 1.1 KV
Grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in
below type of pipe erected with 6A
Modular type switch and hum free EME
step type electronic fan regulator
mounted and accessories with earth
continuity of following type erected on
PVC / Metallic/Wooden box, single
mounting base frame covered with
textured/metallic/white front plate
modules erected on / in wall / ceiling as
per pipe erected. with necessary ceiling
rose / H.D.Connector as directed.
(c) with oval conduit /PVC casing capping
double lock type erected flushed on
wall/ceiling complete Cat- III
3 Supply and Installation of 20 W LED Nos 5 757.5
4 Supply and Installation of 9w LED lamp Nos 5 101
5 Design, Engineering, procurement, Nos 5 614.08
Installation, Testing and commissioning of
Point wiring for Individual Plug with Earth
Wire of 1.5 Sq.mm (Green) both are of ISI
marked 1.1 KV grade FRLS PVC insulated
multistranded copper wires with medium
class rigid PVC pipe and acessories complete
with modular type switch and 5 pin plug
erected on PVC / Metallic Box covered with
appropriate front plate modules erected on
wall / celing as per pipe erected with 16 Amp
plug with 2-2.5 Sq.mm Cu wire type
accessories Cat-III.
6 Design, Engineering, procurement, Nos 10 431.27
Installation, Testing and commissioning of
Point wiring for Individual Plug with Earth
Wire of 1.5 Sq.mm (Green) both are of ISI
marked 1.1 KV grade FRLS PVC insulated
multistranded copper wires with medium
class rigid PVC pipe and acessories complete
with modular type switch and 5 pin plug
erected on PVC / Metallic Box covered with
appropriate front plate modules erected on
wall / celing as per pipe erected with 16 Amp
plug with following type acessories ( I) For
6A plug and 6 A switch with 2-2.5 Sq.mm Cu
wire from near by switch board / mcb
distribution board.(c) with oval conduit / pvc
casing capping erected flushed on wall ceiling
Signature of Contractor Executive Engineer
7 Providing and erecting Mains with 1.1 KV Mtr 50 82.82
grade FRLS PVC insulated ISI marked
stranded Copper conductor wire in
following type of pipe to be erected
concealed in /flushed on wall/ceiling,
with 1.5 sq. mm copper conductor FRLS
PVC insulated stranded wire of green
colour for earth continuity of following
size (C) With oval conduit /PVC casing
capping double lock type (c) 3 wire
8 Providing and erecting Mains with 1.1 KV Mtr 50 102.01
grade FRLS PVC insulated ISI marked
stranded Copper conductor wire in
following type of pipe to be erected
concealed in /flushed on wall/ceiling,
with 1.5 sq. mm copper conductor FRLS
PVC insulated stranded wire of green
colour for earth continuity of following
size (C) With oval conduit /PVC casing
capping double lock type (d) 3 wire
9 Supplying & erecting single phase Nos 4 3937.99
approved make industrial exhaust fan
suitable for medium duty ring mounted
low noise operation suitable for medium
duty having following dia size and
maximum speed in RPM [E] 450 mm dia
1400 RPM Cat- III
10 Providing and Erecting 240 V MCB Nos 3 278.76
Doubel Pole Switch for Lighting load ( B
Curve ) having 10 KA breaking capacity
and confirms to IS 8828 with Box having
following capacity.(A) 6 to 32 Amp Cat-
11 Providing and Fixing Surface mounted Nos 6 5555
general purpose square shaped luminaire
with low height CRCA housing and high
transmissivity diffuser suitable for office
application. Available in options of white
& grey housing with profiled & flat
diffuser SM366C LED32-6500 PSU OD
12 Removal of Old wiring and lighting Job 1 1818
SITC Crompton Centrifugal Water Pump Nos 1 21210
13 ( Booster Pump ) with wiring.
Signature of Contractor Executive Engineer
I/we agree to carry out the work at ___________________ % above the Estimated
tender cost of Rs.____________________ (should be written in figure and words
mentioned above.
I/we agree to carry out the work at ___________________ % below the Estimated
tender cost of Rs.____________________ (should be written in figure and words
mentioned above.
Estimated amount put to tender Estimated amount put to tender
Add % above % below
Total Rs. Total Rs.
In words Rs. In words Rs.
Bidders Signature Executive Engineer,
GIDC, Vadodara.
Signature of Contractor Executive Engineer
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Volume - I (PQ).pdf
Volume - II (Technical Specification).pdf
Price bid.pdf
B1 Agreement - Part 1.pdf
B1 Agreement - Part 2.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .