OPERATION AND MAINTENANCE OF STREET LIGHTS 2026-27

Maintenance of street lighting control, circuit by electrical technician for switch on dusk and switching off at dawn during 24 hours of time by using electrical safety measures housed in a metal box housing Switch On Off

Supplying and fixing of porcelain fuse channel with cut on existing wooden panel using necessary nuts bolts and washers 200amps as per item no 6.7.4.

Operation and Maintenance of T5 Horizontal type streetlight fluorescent fitting suitable for streetlight twin four lamp ratings 24W 28 FTL 18 T5 Housing Shall be with pressure die caet aluminum with UV protected clear acrylic diffuser with thermoformed CRCA gear tray push fit poly carbonate lamp holder low loss high frequency electronic ballets with IP 54 Protection 4x28watts

Operation and maintenance of light emitting diode LED 25 watts street lights fitting fabricated with die cast aluminums base with suitable heat sink for heat dissipation the fitting should comprise efficient electronic driver careen niche onramp Philips Luciles make optically designed high efficiency LED Light Should Be used polycarbonate transparent Cover with IP 66 protection. including 50000 Burning hours Alloy ML 24

Operation and maintenance of light emitting diode LED 72 watts street lights fitting fabricated with die cast aluminums base with suitable heat sink for heat dissipation the fitting should comprise efficient electronic driver make optically designed high efficiency LED Light Should Be used polycarbonate transparent Cover with IP -66 protection. including 50000 Burning hours Alloy ML-24

Operation and maintenance of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree Nichia Lumileds Osram make LED Source. LED Floodlight 200W Repairof Highmast Light.

Metal halide MH lamp fixture consist of metal halide lamp confirming to IS 9974 part I and II , Choke of Heavy duty inductive Polyester filled copper wound ballast suitable for MH lamps made from low loss silicon steel lamination and are wound with polyester based super enameled copper wire with class F insulation on specially designed glass files nylon bobbin and igniters suitable for MH lamps confirming to IS 9974. 400watts Metal halide Lamp fixture for street High Mast.

HPSV lamp Fixtures Should be of Single piece gravity die cast LM6 alloy, ISI marked street light luminaries suitable for watt elliptical high pressure sodium lamp made by gravity die cast aluminum housing. the luminary is painted white inside and hammer tone gray outside the luminaries meet IP -65 Protection and confirm to IS 10322 Part5sec3 Specification but without lamp. 250watts Sodium vapor Lamp fixture for Street Lights

Supplying and fixing Regular MCB distribution Boards on wall aood Board flush mounting using require clamps bolts nuts with provision forfixing suitable type capacity MCB SINGLE PHAse 3 phase single door with powder coated painting Made out of 14 SWG MS enclouse 2023 24 Vol 4 PWD ELE SR Page No 18 Ino 5 1 9 2 6 Way SP N

Operation and maintenance of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree Nichia Lumileds Osram make LED Source 40Watt

Operation and maintenance of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer Cree Nichia Lumileds Osram make LED Source 150Watt

Four feet 36W fluorescent lamp fixtures Consisting of 4 long 36 W tube light as specified by IS 2418 Part I II III and IV Starter as per IS 2215 1968 and ballasts as per IS 1534 Part 1 1967 The Ballasts Shall be legibly marked for origin type wiring diagrams ISI Certification 40 watts fluorescent tube light fixture for street Lights CMC Office 120 Filter house 22 Samuday Bhavan10 Total 152

four feet 36W fluorescent lamp fixtures Consisting of 4 long 36 W tube light as specified by IS 2418 Part I II III and IV Starter as per IS 2215-1968 and ballasts as per IS 1534 Part 1967. The Ballasts Shall be legibly marked for origin type wiring diagrams ISI Certification. 40 watts fluorescent tube light fixture for street Lights