Loading
Loading…
Loading…
19,311 results • Latest
Providing AC Car to Medical Superintendent KIMS Koppal on Hire Basis
Providing AC Car to Medical Superintendent KIMS Koppal on Hire Basis
Providing One no. of (6plus1) seater Mahindra Bolero /equivalent vehicle model 2025 onwards with GPS fitted for VHEP along with driver for KPCL duty on monthly basis (12Hrs duty) for a period of two years & extendable one more year based performance of the agency & condition of the vehicle
One no. of (6+1) seater Mahindra Bolero /equivalent vehicle model 2025 onwards with GPS fitted for VHEP along with driver for KPCL duty on monthly basis (12Hrs duty) with monthly stipulated 2000kM
Overhauling of BFP Cartridge Spares Services during AOH
Servicing of BFP Cartridge - FK4E36
Consultancy service for conducting comprehensive Energy Audit and getting CTO for 132 or 33KV and 33 or 11KV sub-stations
RMO E and M Services at Sewa Kutir, Kingsway Camp, Delhi. (SH- Replacement of Old defective feeder Panels with their accessories and cable work).
Supplying, installation, testing & commissioning of CPRI approved modular type polycarbonate thermoplastic floor mounted electrical panels of size 2300X1735X600 mm complete with 400 A Copper Bus bar suitable for following incomer and outgoing capacity alongwith CC foundation of 1:3:6 (1 Cement : 3 Coarse : 6 graded stone) aggregate 20mm (NS) (600mm below the ground level and 400mm above the ground level) it should be covered with Aprin plate (400mm above the ground) not less than 3 mm thick with necessary nuts & bolts or grouting into the foundation for fixing the panel, The enclosure shall be environment friendly, recyclable, UV resistant, halogen & silicon free, anti-acid & anticorrosive, IP65, glow wire test for 960 deg. C, The gasket material shall be Polyurethane, while the gasket shall be internally embedded. The manufacturer of board/ panel shall submit a copy of CPRI test report, Degree of ingress protection IP-65 in accordance with IEC 60529, a copy of type test report of a board made out of polycarbonate thermoplastic panel in accordance with IEC 60439-1 and IEC 61439-2 for power switchgear and control gear assembly, routine test certificate from manufacturer/ principal company in accordance with IEC 60439-1 (mainly consisting of Degree of protection of system, Temperature Rise Limit, Dielectric properties, Short Circuit withstand strength, Effectiveness of protective circuit, Clearance and creepage distance, Mechanical operation Etc.) for better safety the polycarbonate enclosure shall be fire retardant & self-extinguishing in accordance with IEC 60695-2-1, DIN VDE 0304 Part3, UL Subject 94 for Flammability V-2, It should be tested at glow wire test for 960 Deg, C. The impact stregth of polycarbonate enclosure/ Boards i.e the degree of protection against mechanical load shall be in accordance with EN 50298-98 for IK08. The MCB/RCCB switching operations/ accessing the MCB duly should be preferably by opening of a window flap. Panel should have consisted of dew guard which is a passive solution for mitigation of condensation i/c dismentling of old existing panel and disconnection the existing cables and reconnection in this panel i/c credit for old defective panel etc complete as per attached drawing etc as required. (Note:- The board manufacturer must submit the copy of type test reports for polycarbonate Thermoplastic Board)
License for Functional Food-QSR Quick Service Restaurant Outside NITB at S V Airport Raipur
License for Functional Food-QSR (Quick Service Restaurant) Outside NITB at S.V. Airport, Raipur