Loading…
Loading…
Tender Value
₹61.5 L
EMD Value
₹61,600
Closing Date
24 Apr 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
CHIEF OFFICER, NAGARPALIKA CHHOTAUDEPUR.
BID DOCUMENTS FOR RENOVATION WORK OF S F SCHOOL AT CHHOTAUDEPUR NAGARPALIKA UNDER 15TH FINANCE UNTIED GRANT YEAR 2024 - 25
296791
895/2026 DATE : 08/04/2026
Open
Civil Works
Chhota Udaipur
3 documents required · 3 mandatory
₹2,832
The Chief Officer, Chhotaudepur nagar palika, Chhotaudepur.
₹61,600
15 Apr 2026
15 Apr 2026
15 Apr 2026
24 Apr 2026
15 Apr 2026
Item Qty. Description Total Unit Amount
1 264.00 Dismentling doors, windows, ventilators etc. (wood or steel)
Smt. shutters including chowkhats architraves, holdfasts and other
attachment etc. complete and stacking them within all lead and
lift.(i) Not exceeding 3 Sq.M. in area.
2 16.00 Dismantling santtary fittings like wash basin . W.C. pan Indian
Each and European type, flushing tank etc. including stacking the
materials with all lead and lift.
3 354.00 Dismentaling tiled of stone floors laid in mortar including
Smt. stacking of serviceable materilas and disposal of unserviceable
materials with all lead and lift.
4 13342.00 Removing dry or oil bound distemper by a washing and scraping
Smt. and sand papering the wall surface smooth including necessary
repairs to scratches complete.
5 3.00 Providing and Laying Brick work using common burnt clay
Cmt. building bricks (Conventional) having crushing strength not less
than 35 Kg./Sq. Cm. in Super Structure Above Plinth level in
Cement Mortar (1:6) (1 Cement : 6 fine sand) etc. complete for
6 954.04 Providing 15 mm. thick cement plaster in single coat on Rough
Smt. (similar) side of single or half brick walls for interior plastering
upto floor two level and finished even and smooth in. (II) cement
mortar 1 : 4 (1 cement : 4 sand) Extra over item 58 to 64 for
finishing with a floating coat of neat cement slurry. (upto 10 ton)
SBD SECTION-7 BILL OF QUANTITIES-210
7 347.46 Providing 10 mm. thick cement plaster in single coat on
Smt. brick/concrete walls for interior plastering up to floor two level
and finished even and smooth in. (II) cement mortar 1 : 4 (1
cement:4 sand) Extra over item 58 to 64 for finishing with a
floating coat of neat cement slurry. (upto 10 ton) Extra over
items 58 to 71 for plastering on cellings and sofits of stairs upto
floor two level instead of plastering on walls. ₹ 203.37 Smt.
8 645.74 Providing 20mm thick sand faced cement plaster on walls upto
Smt. height 10 metres above ground level consisting of 12mm thick
backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick
finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete
9 9839.00 Applying two coats of putty & two coats of primer of approved
Smt. brand and manufacture on new wall surface to give an even
shade including thoroughly brushing the surface free from
mortar dropping and other foreign matter and sand papered
10 6873.00 Distempering (Three Coat) with oil bound washable distemper of
Smt approved brand and manufacture and of required shade on wall
surfaces to give and even shade over and including a primer
coat with alkali resistance primer of approved brand after
throughly brushing the surface free from other foreign matter
and also including preparing the surface even and sand papered
11 2966.00 Distempering (Three Coat) with oil bound washable distemper of
Smt. approved brand and manufacture and of required shade on
Ceiling & Sloping Roof surfaces to give and even shade over
and including a primer coat with alkali resistance primer of
approved brand after throughly brushing the surface to give and
free from other foreign matter and also including preparing the
surface even and sand papered smooth.
12 3503.00 Finishing wall with Weather Proof Acrylic Emulsion Exterior
Smt. Paint on wall surface (three coat) to give and even shade and of
approved brand and manufacture including throughly brooming
and brushing the surface to remove all dirts, and remians of
loose powdered material.
SBD SECTION-7 BILL OF QUANTITIES-211
13 63.00 Providing and fixing 35mm thick flush door shutters, solid core
Smt. construction with frame of first class hardwood with cross band
and face veneer or plywood face panels, including anodised
alluminium butt hinges with necessary screws. (A) Decorative
type and bright finished M.S. Piano hinges of Nickel plated piano
hinges in flush door shutters.
14 22.00 Providing and fixing FRP frame size 125x65 mm and 35mm
Smt thickFRP shutter with wood grain raised panneled design finish
shutterhaving extra reinforcement on sides & edges in Gel coat
finish.The core of the shutter & frame is to be filed up with
injected polyurethene foam done in situ alongwith embedded
woodenpieces for stiffening & also taking hinges & fintures. The
whole FRP frame & shutter is to be water proof weather proof,
termiteproof & resistance to mild acid/alkali. Rates are to be
inclusive ofS.S hinges with fastener sleeve & alluminium fixtures
15 109.50 Providing and fixing 35 mm thick panelled ,glazed or panelled
Smt. and glazed shutters, for Doors windows and clearstory windows
including anodised alluminium But
hinges with necessary screws and indian teak wood shutters
with. (A) Plywood sheet panels. Do For Partly Pannel Partly
16 70.50 Providing and laying cement concrete 1:5:10 (1- Cement : 5- fine
Cmt. sand : 10- graded brick bat aggregates 40mm nominal size) and
curing complete excluding cost of formwork in (A) Foundation
and Plinth. Do for China Mosaic
17 118.50 Providing and laying coloured glazed tiles of the size 300 mm x
Smt. 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers
of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement
: 3 coarse sand) & jointed with white cement slurry.
18 6.00 Providing and fixing glazed louvered glass windows and
Smt ventilators with teak wood frame 10cm. x 7cm. size including
coats of oil painting to wood work etc.complete.
SBD SECTION-7 BILL OF QUANTITIES-212
19 467.00 Providing and laying broken chine mosaic flooring for
Smt terrace using 12 mm to 20 mm broken pieces of glazed tiles to
be laid over cement mortar 1:3 to plain or slope and to be
tempered to bring mortar creme out upto surface using
white cement including rounding off junctions and extending
them upto 15 cm along the wall,clearing with water and oxalic
acid etc. as directed.
20 354.00 Providing and laying polished kota stone slab 25mm thick in
Smt risers of steps,skirting Dedo and pillars laid on 10mm thick
cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with
gray cement slury mixed with pigment to match the shade of
slab including rubbing and polishing etc. complete.
21 8.00 Providing and fixing wash down water closet European type
Nos. W.C. Pan with integral "P" or "S" trap and PVC flushing cistern
with a pair of C.L.I. or Mild Steel Brackets, complete with fittings
such as lead value siphon, 15mm nominal size brass ball value
with polythene float, C.P. Brass handle unions and couplings for
connections with inlet, outlet and over flow pipes, 40 mm dia
flush bend including cutting holes in walls and making good the
same connecting the flush bend with cistern and closet etc.
comp. incl plastic sheet cover including jointing trap with pipe in
C.M. 1:1 ( Cement : 1 fine sand) (a) Viterous China - (i) In White
22 2.00 Providing and fixing washbasin with single hole for pillar tape
Nos. with C.I. or M.S. brackets painted white including cutting holes
and making good the same but Including all Necessary fittings.
(A) vitreous china : (ii) Flat back washbasin 550 mm x 400 mm
size (i) In white colour
23 2.00 Providing and fixing 430mm x 260mm x 350mm size white
Nos earthen ware flat back or corner type urinal of approved quality
including. Connections the urinal with waste pipe, stop tap etc.
complete. 1268.56 Nos.
24 30.00 Providing and fixing screw down bib tap of following size (A)
Nos Brass screw bib tap polished bright - 15mm
25 4.00 Providing and fixing gun metal chek or non return fullway wheel
Nos. valve. (A) 15 mm Dia. 186.83 No.
SBD SECTION-7 BILL OF QUANTITIES-213
26 26.00 Providing and fixing 100 mm dia sand cast iron grating for gully,
Nos. floor or nanhi trap. 36.98 No.
27 20.00 Providing and fixing Cast Iron (Spun nahni trap of the 100mm.
Nos. Inlet and 50mm. Dia outlet having self cleaning design with C. I.
Screwed down or hinged grating and stainless steel jali at F.F.I.
Including cost of making cuts in walls slab floor etc. and making
them as per original testing etc. complete as directed by
Engineer-in-charge. 631.02 No.
28 20.00 providing and fixing SW gully trap with CI grating brick masonry
Nos. chamber and water tight CI cover frame of 300mmx300mm size
inside with standard weight. Square mouth Traps (A)
100x100mm size P trap type. 1292.19 No.
29 2.00 Providing, laying and constructing brick masonry chamber for
Nos. underground C. I. Inspection Chamber and bends with bricks
having crushing strength not less than 35Kg./Cm2 on C. M. (1:5)
(1 cement, 5 Sand) C. I. Cover with frame (light duty) of 455mm
x 610mm internal dimension total weight of cover with frame to
be not less than 38.00 Kgs. (Wt. of Cover 38 Kgs. and wt. of
Frame 15 Kgs.) with R.C.C. top slab with 1:2:4 (1 cement,
Coarse sand, 4 graded stone (Kapachi) ) foundation concrete
1:5:10 (1 cement, 5 Coarse sand, 10 brick bats of 40mm
nominal size) inside plaster 15mm. thick with C. M. 1:3 (1
cement, 3 Coarse sand) finished smooth with a floating coat of
neat cement slurry on walls and bed concrete including curing
etc. complete as directed by Engineer-in-charge.
Inside Dimentions 600mm x 850mm and 450mm deep for pipe
line with Three or more Inlets.
30 25.00 Providing, laying and jointing in true line and level 32 mm dia
Rmt U.P.V.C. Pipe (SCH-40) for cold water including fittings make as
Prince/ supreme/astral/finolex or equivalent as approved by
Engineer In Charge. Pipe shall be fixed on the wall with the help
of clamp at every two meter c/c. or shall be concealed as
directed including necessary fittings etc. including testing of pipe
and joints and fixing the same with adhesive solvent, including
cost of all materials. 119.15 Rmt
31 25.00 Providing laying and jointing in true line and level 25mm dia.
Rmt U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the wall
with the help of clamp at every two metre C/C or shall be
concealed as directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials. 91.84 Rmt
SBD SECTION-7 BILL OF QUANTITIES-214
32 25.00 Providing, laying and jointing in true line and level 15 mm dia
Rmt U.P.V.C. Pipe (SCH-40) for cold water including fittings make as
Prince/ supreme/astral/finolex or equivalent as approved by
Engineer In Charge. Pipe shall be fixed on the wall with the help
of clamp at every two meter c/c. or shall be concealed as
directed including necessary fittings etc. including testing of pipe
and joints and fixing the same with adhesive solvent, including
cost of all materials.
33 25.00 Providing, laying and jointing in true line and level 110 diametre
Rmt U.P.V.C (Type B) conforming to IS 13592-1992 with one end
plain and other end socketed with rubber ring, & fittings
conforming to ISI 14735-1999 of approved make for drainage
system pipe line, pipe shall be jointed with each other with
rubber lubricant, pipe shall be fixed on wall using of PVC clamp
of the size 110 mm diametre x 149 mm length x 145 mm heigh
at every 2000 mm center to center or shall be concealed in walls
as directed including necessary fittings such as bends, shoes
etc. including testing of pipes and joints and jointed with
adhesive solvent cement ncluding cost of all materials.
34 65.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of
Pt. 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS
PVC insulated multistrand copper wires, in following type of pipe
to be erected concealed in/ on surface on wall/ceiling complete
with 6A Modular type switch / bell push & accessories and earth
continuity of following type, erected on PVC / Metallic box,
single mounting base frame covered with textured/metallic front
plate modules erected on / in wall / ceiling as per pipe erected,
with necessary Lamp holder/ceiling rose / H.D.Connector as
(a) with medium class Rigid PVC pipe and accessories Cat. III
35 5.00 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm
Pt. (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC
insulated multistrand copper wires, in following type of pipe to be
erected concealed in / flushed on wall/ceiling complete with 6A
Modular type switch and hum free EME four or more step type
electronic fan regulator with separately mounted and
accessories with earth continuity of following type erected on
PVC / Metallic box, single mounting base frame covered with
textured/metallic front plate modules erected on / in wall / ceiling
as per pipe erected. with necessary ceiling rose / H.D.Connector
(a) with medium class Rigid PVC pipe and accessories Cat. III 598.93 Pt.
SBD SECTION-7 BILL OF QUANTITIES-215
36 25.00 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm
Pt. (Green) both are of ISI marked 1.1 KV grade FRLS PVC
insulated multistrand copper wires, in following type of to be
erected concealed in / on surface of wall / ceiling complete with
Modular type switch & 5 pin Plug erected on PVC / Metallic box
covered with appropriate front plate modules erected on / in wall
/ ceiling as per pipe erected with following type of accessories.
[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire
(a) with medium class Rigid PVC pipe and accessoriesCat. III
37 10.00 [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire
Pt. (a) with medium class Rigid PVC pipe and accessories Cat. III
38 15.00 Point wiring for Looped Plug with 6A Modular type switch & 5 pin
Pt. socket erected on PVC / Metallic box, single mounting base
frame covered with textured / metallic front plate modules
erected on / in wall / ceiling with following type accessories Cat.
39 100.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked
Mtr. stranded Copper conductor wire in following type of pipe to be
erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm
copper conductor FRLS PVC insulated stranded wire of green
colour for earth continuity of following size (a) with medium class
Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm
40 100.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked
Mtr. stranded Copper conductor wire in following type of pipe to be
erected in / on wall / ceiling with 2.5 sq. mm copper conductor
FRLS PVC insulated stranded wire of green colour for earth
continuity of following size (a) with medium class Rigid PVC pipe
and accessories (a) 2 wire 4 sq. mm 107.06 Mtr.
41 2.00 Providing & erecting Switch board for Computer or electric
Ea. apparatus consisting of following items in single board erected
on PVC / Metal board with 3 mm thick PC (Polycarbonate) /
Acrylic sheet erected as directed 1 no. 6A/16A universal plug-
switch combined. 4 nos. 6A Switch 4 nos. 6A 5 pin Plug [B] For
Modular Type Accessories Cat. III
SBD SECTION-7 BILL OF QUANTITIES-216
42 2.00 Erection & connection Charges for 200A/ 250A/ 300 A /325 A
Ea. HRC TPN as following
(b)Erection on New angle iron frame duly painted with red oxide
43 2.00 Providing and erecting Sheet Steel powder coated MCB
Ea. distribution board - flush / surface mounted fitted with busbar,
neutral link, earth bar and DIN rail, confirming to IS 13032 and
BS 5486-1986 without MCB to house appropriate nos. of
MCBs.(The DBs should be used of same company of MCB to be
(N) Three phase 8 way SS Double door for horizontal single
44 2.00 Miniature circuit breaker single pole 6A to 32A suitable to
Ea. operate on 240 V A.C. system and having breaking capacity
KA to be erected in existing box. confirming to IS 8828/1996 with
ISI Mark Cat.III
45 1.00 Approved make Four pole moulded case circuit breaker having
Ea. breaking capacity ICU of 25 KA. at 415 V,having normal current
rating up to 25 A to 100A. with Fixed thermal & magnetic release
suitable to work on A.C. supply 50 c/s. with all internal
connections & complete erected in existing 16 G.M.S. housing.
ICS=100% of ICU only Cat III
46 3.00 Supplying and erecting approved make set of indicator lamps of
Ea. LED type lamp, lens cover, Bakelite holder complete erected
with necessary connections.
47 1.00 Supplying & erecting funnel type earthing having earth plate of
Ea. following size burred in specifically prepared earth pit 3 mtr.
below ground with 40 kg. charcoal and salt with alternate layers
of charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a wire
mesh for watering & bricks masonry block, C.I. Cover complete
as per para 7.3 of IS 3043 with necessary length of double
Galvanised Iron / copper earth wire No 6 SWG bolted with lug to
the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long
complete connected to the nearest switch gear with end socket
as per direction & duly tested by earth tester confirming to IS (As
per drawing) with following specification
(A) With 30 x 30 x 0.35 cms: C.I. earth plate 2311.89 Ea.
SBD SECTION-7 BILL OF QUANTITIES-217
48 15.00 Providing and erecting Approved make Ceiling fan with double
Ea. ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200
mm. sweep complete, canopy and 30 cms. down rod erected on
existing hook or clamp with 24/0.2 , 3 core flexible wire with
earthing. [Make shall be approved by Engineer in charge]
49 15.00 Providing 2.5mm.thick laminated acrylic sheet to cover the fan
Ea. hook or Fan box. 18.18 Ea.
50 15.00 Providing Fan clamp of 30 x 5 mm flat of required length &
Ea. mm M.S. Bolt & Nuts erected with necessary hook of 10 mm
M.S. Round Bar.
51 33.00 (A) Tube Light with integral/ non-integral driver (iv) 22-24 Watts,
Ea. Surge - 4KV,IP-20, 4 feet Cat-lll
52 33.00 Supply of approved make lumilux triphospher T-5 tube suitable
Ea. to operate on 120V - 300 V of (B) 24Watt / 28 watt Cat III
53 1.00 Supplying & erecting approved make low noise decorative
Ea. exhaust fan having size 200mm with 1350 RPM with square
frame ABS body with inbuilt lowers & square frame.
Add 18% GST charges Rs.
Add 2% Contengency charges Rs.
Add 1% Quality Control charges Rs.
I / We am/are willing to carry out the work at _____________ % above / below (percent should be written in figure and in
words) of the estimated rates mentioned above. Amount of my/our tender works out as under.
( In words ) _________________________ Percentage above / below the estimated rate.
Estimated Amount put to tender Rs.
Deduct _______ % below Rs. Rs.
Estimated Amount put to tender
Add _______ % above Rs. Rs.
Total Amount Rs.
Total Amount Rs.
SBD SECTION-7 BILL OF QUANTITIES-218
*( Please strike out whichever is not applicable)
Note :1 All work shall be carried out as per Public Works Department Hand Book and other specifications of Division or as
Note :2 Rates quoted include clearance of site (prior commencement of work and its close) in all respects and hold good
for work under.
Note :3 I/ We have read the conditions mentioned in this tender and agree to abide by the same.
Signature of Contractor President Chief Officer
ChhotaNagarpalika
Chhota Udepur Udepur Nagarpalika Chhota udepur
Chhota Nagarpalika
Udepur Nagarpalika
Chhota Udepur Chhota Udepur
SBD SECTION-7 BILL OF QUANTITIES-219
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
SBD SECTION-1 TO 4.pdf
SBD SECTION-5 TECHNICAL SPECIFICATION.pdf
SBD SECTION-6 FORM OF BID.pdf
SBD SECTION-7 Schedule B.pdf
SBD SECTION-7 BILL OF QUANTITIES.pdf
SBD SECTION-8 SECURITIES AND OTHER FORMS.pdf
SBD SECTION-9 DRAWING.pdf
SBD SECTION-10 DOCUMENTS FURNISHED BY BIDDER.pdf
GENERAL INSTRUCTIONS TO BIDDERS.pdf
Notes.pdf
Required Attachment Form as Per Bid Evaluation Criteria.pdf
OTHER IMPORTANT-1.pdf
OTHER IMPORTANT-2.pdf
OTHER IMPORTANT-3.pdf
Download all tender documents and submit your bid