Construction of 12.527 km Elevated Viaduct from Shilaj Circle to Badrabad Dead End, including 7 Nos. elevated Stations of Ahmedabad Metro Rail Project

Bill of Quantity (BOQ)

Gujarat Metro Rail Corporation (GMRC) Limited

(SPV of Govt. of Gujarat and Govt. of India)

Formerly known as Metro Link Express for Gandhinagar and Ahmedabad (MEGA) Co. Ltd.

Block No.1, First Floor, Karmayogi Bhavan, Behind Nirman Bhavan,

Sector 10/A, Gandhinagar:

Corporate Identification No (CIN): U60200GJ2010SGC059407

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

PREAMBLE AND GENERAL REQUIREMENTS FOR ELEVATED SECTION

The Pricing Document shall be read in conjunction with technical Specification, Employers Requirement,

BOQ’s for the works and other provisions of the tender documents, Schematic tender drawings etc.

including Annexure, Appendix, Addendum / corrigendum and any other document forming part of the

Tender Document.

The Bill of Quantities shall be read in conjunction with the Instructions to the Tenderer, General Conditions of

1. Contract, Special Condition of Contract, Employers Requirement, Scope of work, technical specifications and

drawings etc. If the specifications in the scope of work, Employers Requirement, Technical specification are

inferior with respect to relevant codes and standards then the provision of the Codes and Standards shall

prevail and vice versa. The decision of the Engineer-in- charge regarding this issue shall be binding on the

The quantities given in the Bill of Quantities are estimated and provisional and are given to provide a common

2. basis for bidding. The basis of payment will be the actual quantities of work carried out, as measured by the

Contractor and verified by the Engineer and valued at the rates and prices tendered and accepted in the priced

Bill of Quantities, where applicable, and otherwise at such rates and prices as the Engineer may fix within the

terms of the Contract. The final executed work quantities may vary.

The rates for each item and the Schedule of Items shall be written in indelible ink or type written in the

3. summary sheet in words and figures. Therefore, the quoted price for each Schedule shall be calculated and

written against each Schedule of the work. The total price, as sum of quoted price for all the Schedules of the

work shall be shown at the bottom of the summary sheet. The total price shall also be written in words and

figures. In case of any discrepancy, the amount written in words will be taken. The percentage/item rates shall

be quoted and amount evaluated in Indian Rupees only. as applicable against Schedule/items in BOQ, both in

figures and in words. The person authorized to sign on behalf of the tenderer shall sign in full at bottom of all

pages and at the end of schedule.

All the item of works which are not covered in BOQ Schedule A, B and C1 of structure Section, but are required

4. to be carried out as per the direction of Engineer-in-Charge, shall be carried out under the Schedule-C2 i.e.

Provisional Sum Schedule as per below preference.

i) R&B SOR 2023-24

ii) GWSSB SOR 2022-23

(The rate to be paid shall be as per rates mentioned in above SOR excluding GST)

The rates in BOQ are exclusive of GST (18%) and custom duties but including all other Taxes and cess, octroi

5. etc. as on date of submission.

If the Tenderer fails to fill up the percentage rate, “In each Schedule of the Summary sheets” the offer will be

6. evaluated based on the Par rate (cash value rate of the tender) given in the BOQs and no claim on account of

this will be entertained from the tenderer. However, GMRCL reserve the right to disqualify the tenderer.

General directions and descriptions of work and materials are not necessarily repeated or detailed in the Bill

7. of Quantities. References to the relevant specifications and sections of the contract documentation should be

made before quoting rates in the Bill of Quantities.

The rates are deemed to be inclusive of all lead (except as otherwise specifically provided in the description of

8. the particular item), lifts, ascend, descend, handling, rehandling, crossing of Nallah/Streams/Tracks any other

All enabling works for executing the work e.g. approach road to site, launching arrangements, arrangement of

9. water and electricity and any other incidental works which can be reasonably be inferred to be required for

completing the works is to be arranged by the contractor at his own cost and deemed to be included in the

In all concreting items, all material, equipment, labour, casting beds, stress frames, form work staging,

10. scaffolding, etc is to be arranged by the contractor within the quoted rates.

Storage of Material: All the material at site will have to be properly stacked & stored so as to facilitate

11. inspection. The material should be properly protected from the detrimental effects of nature and fire, theft etc.

The contractor shall be responsible for watch & ward and any loss or deterioration on account of above shall

lead to rejection of material and the contractor has to replace the same at his own cost.

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

The method of measurement of completed work for payment shall be in accordance with provisions in

12. Contract/Specifications except as otherwise specifically provided in the description of item or particular bill

of quantities or explanatory notes to the particular bill of quantities.

Obtaining prior permission for felling/cutting of trees will be in the scope of Contractor.

All materials to be supplied by the contractor within the quoted rate for the respective item.

All design mix concrete shall be machine batched with automatic weigh batcher, machine mixed and machine

15. vibrated or Ready Mix Concrete prepared in batching plant and transported by transit mixer to the site of work

or as directed by the structural designer.

The installation price of switchboards, metering panels, DB's or any other items shall include supply and fixing

16. of supporting steel structures/MS channels grouting of the same, associated civil works etc., as required. No

change in unit rate shall be allowed for any change in quantity or for any other reason whatsoever.

Prior to demolishing of any structure measurements will have to be taken. Scheme of dismantling has to be got

17. approved from the Engineer-in-charge.

All activities not specifically covered in BOQ /Schedule of Items, but required to be executed in order to

18. complete the Scope of work have to be deemed as covered with in these mentioned items of the Schedule /

Errors will be corrected by the Employer for any arithmetical errors in computation or summation as indicated

19. in the Contract Document.

The contractor must see the site conditions such as type of soil, locations etc., and take all factors into

20. consideration while quoting in the BOQ as no extra cost will be allowed on any ground arising out of or relating

to the site conditions. earth resistivity testing, water testing all shall be carried and cost of same shall be

considered included in the bid.

The contractor shall take into account the expenses of pre-commissioning tests to be conducted as per

21. specification of the complete installation by licensed agencies.

All temporary works shall be carried out by the contractor including temporary lighting & power at station

22. areas, Switchboards, DG sets, cables, stores, etc.

Repairs to damage of existing carriage way, canal work etc. during construction work shall be carried out by

23. contractor at his own cost as per the technical specifications. Prior to start of repairing work, scheme of repair

work shall be got approved from Engineer in charge.

For all type of cement concrete work rate shall inclusive of

24. I. The rate shall include cost of all necessary admixtures required as per mix design, curing, casting including

centering, shuttering, propping, staging, scaffolding, necessary tools, plants, machinery and all related

operations, etc.

II. The rate shall include cost of carrying out concrete mix design from approved laboratory as described in

the specification or as approved by Engineer-in-charge.

III. The rate is inclusive of all materials, including, mixing in fully automatic batch mix plant, transportation by

transit mixer for any lead from plant site, pumping, pouring, curing, placing in position, making good the

damages, with all lift with contractor's labour, tools & plants, machineries, as required.

IV. The rate is inclusive of providing formwork for exposed form finished concrete surface for concrete above

ground level in desired pattern, sizes with grooves, using laminated shuttering plywood/steel shuttering,

including neat cleaning & rendering of exposed concrete surface, as per the sample approved by the Architect

and as directed by the Engineer-in-charge. (Same kind of shuttering material should be only used for standard

and residual sizes)

V. The rate is inclusive of roughening and/or hacking exposed concrete surfaces for key for plastering, grinding

with carborundum stone over concrete spills / level difference in joints of concrete.

VI. The rate is inclusive of cost of providing grooves, chamfers, moulding, cutout etc. in formwork & using

required dosage of plasticizer in concrete for obtaining required workability as per approval of Engineer-in-

charge. The work will include vibration of concrete, curing protecting from damage, bailing/pumping out

water if required, levelling of ground, making site good etc.

VII. The rate is included labour for keeping embedment if any wherever required while casting.

VIII. The rate shall include form liner finish as per drawing / technical specifications.

The Tenderer’s offer shall be exclusive of GST. Income Tax and any other statutory taxes to be deducted at

25. source, if any, will be deducted by the Employer in accordance with the Income Tax Act and any other acts in

force and in accordance with instructions issued by the Authorities on this behalf, from time to time.

The Tenderer is required to furnish the PAN for all members of Group.

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

The rates and prices to be tendered in the Bill of Quantities are for completed and finished items of work and

27. complete in all respects. It will be deemed to have included all constructional plant, tools, machinery, labour,

supervision, materials, fuel, oil, consumables, elect& power, water, transportation, all leads and lifts,

dewatering, all temporary works and false works, construction of temporary stores and buildings, fencing,

watering, lighting, erection maintenance, night working, inspection facilities, safety measures at work sites

casting yard for workmen and road users, preparation of design and drawings pertaining to the casting yard,

staging, shuttering, form work, stacking yard etc., establishment and overhead charges, labour camps,

insurance costs for labour and works, contractor's profit, all taxes, royalties, duties, cess, octroi, and other

levies and other charges together with all general risks, liabilities and obligations set out or implied in the

contract and including remedy of any defects during the Defect Liability Period, unless otherwise provided in

Annexure-13A as duly filled in and priced should be invariably submitted in the Financial Package as

28. mentioned under Para C15.1 of the I.T.T (Instruction to Tenderers) under Volume-1 of Tender-Document and

the evaluation of Financial Package by the Employer will be done in accordance with Para E5 of ITT and other

relevant terms and conditions of the Tender.

Tender Total to be sum of total amount as derived/ quoted in the summary sheet along with addition of Price

Tender Total to be sum of total amount as derived/ quoted in the summary sheet along with addition of Price

29. of unqualified withdrawal of all conditions of Deviation, as per Annexure-13A, if any. This Tender Total will be

used for comparative evaluation of the Tenders.

The tenderer shall include in the Annexure – 2, Tax Estimate of the tender document, the rates/amounts

30. considered in the state and central Tax, duties, levies and included in the tender price and Gujarat state

government taxes, cesses and levies.

The tenderer should quote his percentage against each Schedule in the “summary sheets of each part” only on

31. N Procurement Portal and nowhere else.

The preparation and submission of the design, drawings, etc. for the complete façade works, unitized structural

32. DGU glazing system and all of its elements, roofing with structural steel, space frame, polycarbonate sheet for

the courtyard and atrium, canopies shades at various locations, etc. is in the contractor's scope. The contractor

shall submit 3 qualified façade vendors/structural designers with substantial experience in similar projects.

GMRC will review and select the vendor. The contractor must then obtain designs from the selected vendor

and submit all designs, drawings, and calculations for approval.

All design criteria must comply with relevant codes, force factors, and load factors while maintaining the

original architectural intent. Following design approval, the contractor shall create mockups for final approval

by the Architect/GMRC before proceeding with execution. All these requirements are included in the

contractor's scope, and no additional payment will be made for these items.

The successful contractor shall submit the material sampled which are in co-ordination with interior work like,

33. detector, camera, switchboard, Distribution board, lighting, speakers etc.., to the Engineer for approval prior

to supply/commencement of such works. The approval of these samples to be sought from architect/GMRCL.

Any choice of color model aesthetical options from approved makes shall be supplied by contactor at no extra

cost / commercials.

All material to be supplied at site shall be pre intimated to the engineer along with supporting FAT, material

34. test, type test reports and qty sheet along with specification compliance, unless the same is approved and

accepted the material shall not be supplied at site.

All expenses related to material FAT at factory or OEM location shall be borne by contractor, also the cost shall

35. include transportation, lodging & boarding of engineer / GMRCL team attending the testing at factory / OEM

location weather local / abroad.

The successful contractor shall submit 100% compliance against each and every BOQ line items & material

36. specification before work commencement at site or any material delivery at site.

The successful contractor shall submit the Schematic diagrams, fabrication drawings with details of all

37. equipment like D.G, Pumps, wirings diagrams etc., to the Engineer for approval prior to

supply/commencement of such works. The approval of these drawings will be general and will not absolve the

contractor of the responsibility of the correctness of these drawings. At least six copies of the approved

drawings shall be submitted to the Engineer for their distribution to various agencies at site at no cost to the

All testing and calibrating charges for the Meters shall be included in the installation price of the Meter Cubicle.

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

High voltage testing by Voltage Boosters, relay calibration by secondary injection and meter calibration have

39. to be carried out at site by authorized agencies.

The contractor shall carry out DG set testing and commissioning including supply of fuel & other

40. consumables/accessories at site without any extra cost for supply of fuel & other consumables/accessories as

required or instructed by the Engineer. Supply of fuel for testing shall be provided by the Contractor after

successful testing DG tank shall be filled by contractor. All the charges for fuel is also included. No seperate

payment shall be made for the supply of fuel.

The contractor shall supply all equipment, spares and consumables required for 104 weeks of Defect Liability

All wall and floor openings where cable containments are passing through shall be sealed with 2-hour fire

42. rated sealant after completion of cable pulling or installation.

The rate also includes all charges like packing and forwarding charges, handling, loading, unloading,

43. transportation, transit and other insurance, hoisting to all levels, setting and fixing in position, disposal of

debris including all other labour, Liabilities, obligations and risks arising out of conditions of contract and

Liasoning for obtaining approval from CEIG, Fire clearances, Electrical Inspectorate & Local authorities.

All enabling works for executing the work e.g. approach road to site, launching arrangements, arrangement of

44. water and electricity and any other incidental works which can be reasonably be inferred to be required for

completing the works is to be arranged by the contractor at his own cost and deemed to be included in the

All items of E&M works which are not covered in BOQ but are required to be carried out as per direction of

45. engineer in charge will be based on list of concerned item as available in DSR (E&M)

Payment for scheduled E&M works shall be made as follows:

1) ⁠65% on supply and delivery

2) ⁠10% on installation

3) 15% on testing and commissioning

4) 5% on integrated testing and commissioning

5) 5% on taking over

Payment for the Comprehensive Annual Maintenance Contract (CAMC) shall be made in equal quarterly

47. instalments over the 5-year contract period (totalling 20 instalments), payable at the end of each quarter upon

submission of the service report and invoice.

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Name of Work: Construction of 12.527 km Elevated Viaduct from Shilaj Circle to Badrabad Dead End, including 7 Nos. elevated Stations, E&M Works

for Ahmedabad Metro Rail Project.

Annexure – 1, SUMMARY SHEET OF BILL OF QUANTITIES & QUOTED RATES

Total Amount (INR)

Total Amount (INR)

(including percent

above / below / at

Schedule No. & Description Basic Cost (INR) % at Par/above/below

S No Amount At Par

Section Description of Section In Figure In Words In Figure Word

1 Schedule-A General

2 Schedule -B1 Foundation Work

3 Schedule -B2 Cast in Situ Concrete Work

4 Schedule -B3 Precast Concrete Work

5 Schedule -B4 Reinforcement and Restressing Steel

6 Schedule -B5 Structural Steel

7 Schedule -B6 Bearing

8 Schedule -B7 Miscellaneous Work

9 Schedule -B8 Structural steel for Open Web Girder

10 Schedule -C1 Electrical System Works

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Name of Work: Construction of 12.527 km Elevated Viaduct from Shilaj Circle to Badrabad Dead End, including 7 Nos. elevated Stations, E&M Works

for Ahmedabad Metro Rail Project.

Annexure – 1, SUMMARY SHEET OF BILL OF QUANTITIES & QUOTED RATES

Total Amount (INR)

Total Amount (INR)

(including percent

above / below / at

Schedule No. & Description Basic Cost (INR) % at Par/above/below

S No Amount At Par

Section Description of Section In Figure In Words In Figure Word

Fire Alarm System & Fire Fighting System

11 Schedule -C2

Air Conditioning & Ventilation System

12 Schedule -C3

13 Schedule -C4 Building Management System Works

Comprehensive Annual Maintenance for

14 Schedule -C5 Years for completed Electrical and

Mechanical system works.

Provisional Sum for Electrical System, Fire

Alarm System & Fire Fighting System, Air

15 Schedule -C6 Conditioning and Ventilation System,

Building Management System and

Miscellaneous Works.

16 Schedule-D1 Road works Item under R&B SOR 2023-24

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Name of Work: Construction of 12.527 km Elevated Viaduct from Shilaj Circle to Badrabad Dead End, including 7 Nos. elevated Stations, E&M Works

for Ahmedabad Metro Rail Project.

Annexure – 1, SUMMARY SHEET OF BILL OF QUANTITIES & QUOTED RATES

Total Amount (INR)

Total Amount (INR)

(including percent

above / below / at

Schedule No. & Description Basic Cost (INR) % at Par/above/below

S No Amount At Par

Section Description of Section In Figure In Words In Figure Word

Any other items not covered in Schedule A,

17 Schedule-D2 B & D1 but are required to be carried out

as per direction of Engineer, the order of

preference for adopting rates is as follows:

i) R&B SOR 2023-24

ii) GWSSB SOR 2022-23

(The rate to be paid shall be as per rates

mentioned in above SOR excluding GST)

Total of Schedule A, B1, B2, B3, B4, B5, B6, B7, B8, C1, C2, C3, C4,

01. The tenderer shall quote a percentage (Above/Below/At Par) at SN. 1 to 17 of this summary Sheet only and nowhere else. Total of Schedule from S. No: 1 to

shall be Considered for Tender Evaluation.

02.For the purpose of comparative evaluation of tenders, the amount worked out from the quoted percentage (above/below/at par) or/and quoted rate of item as

applicable, in equivalent INR shall be compared amongst various tenders to determine the lowest evaluated tender applying provision of clause 1.1.3.1 (ix) of NIT.

03. The bidder’s quote to be filled in Annexure – 1 (i.e. Summary Sheet of Bill of Quantity), it should be exclusive of GST & Custom duties.

04. The tax bifurcation to be filled in Annexure – 2 (i.e. Details of Taxes and Duties.

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Summary of Bill of quantities

Section Description of Section Amount (Rs)

Schedule-A General

Schedule B:-Civil Structural work

Schedule -B1 Foundation work

Schedule -B2 Cast in Situ concrete work

Schedule -B3 Precast concrete work

Schedule -B4 Reinforcement and prestressing steel

Schedule -B5 Structural steel

Schedule -B6 Bearing

Schedule -B7 Miscellaneous work

Schedule -B8 OWG Steel Structure

Schedule -C E&M Works

Schedule - C1 Electrical System Works

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Schedule - C2 Fire Alarm System & Fire Fighting System Works

Schedule - C3 Air Conditioning & Ventilation System Works

Schedule - C4 Building Management System Works

Schedule - C5 Comprehensive Annual Maintenance for 5 Years for completed Electrical and Mechanical system

Schedule- C6 Provisional Sum for Electrical System,Fire Alarm System & Fire Fighting System, Air Conditioning

and Ventilation System, Building Management System and Miscellaneous Works

Schedule D: Provisional Sum

Schedule D1 Road works Item under R&B SOR 2023-24

Schedule D2 Any other items not covered in Schedule A, B & D1 but are required to be carried out as per

direction of Engineer, the order of preference for adopting rates is as follows:

i) R&B SOR 2023-24

ii) GWSSB SOR 2022-23

(The rate to be paid shall be rate of SOR excluding GST)

Total Amount (excl. GST)

Total Amount (excl. GST)

GMRC Page 10 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Schedule A - General Items

Item Description Unit Rate (excl. Quantity Amount (Rs.)

Note: During the Contract period till the completion of the works the contractor shall

provide the following:

1 Surveying for verifying alignment, marking pier location, vertical & horizontal clearances KM

and establishing triangulation points and bench marks for the elevated corridor including 83,648.50 12.90

corrections, if any.

Note: The payment schedule for the item shall be as follows:

I. Payment @ 25% of total cost of the item on checking and approval of all control points

and submission of drawings.

ii.Payment @ 70% of total cost of the item equally distributed over the duration of the

contract and will be paid on pro-rata basis.

ii.Payment @ 5% of total cost of the item on satisfactory completion of work along with

the final bill.

(i) Payment @ 25% of total cost of the item on checking and approval of all control points and

submission of drawings.

(ii) Payment @ 70% of total cost of the item equally distributed over the duration of the

contract and will be paid on pro-rata basis.

(iii) Payment @ 5% of total cost of the item on satisfactory completion of work along with the

GMRC Page 11 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

2 Providing temporary barricade in good condition (new/refurbished) including all road RM

safety devices on both sides of viaduct/stations during construction at site as per technical 4,975.10 -

specifications and GFC drawings. Temporary barricade shall be of plain MS sheet 16 Gauge

fixed with steel frame as per drawing, painting (including primer of approved quality) with

synthetic enamel paint of approved color, quality and brand, writing lettering and logo of

Metro including maintenance of the same duly cleaning the same on fortnightly basis and

painting if required, arrangement for blinker lights/ rope light on barricades during night

as per requirement and as per the instruction of the Engineer-in-charge. During the

construction, barricading has to be kept continuously. Nothing extra will be paid for

dismantling and re-erecting the barricades within contract boudry. There should not be

any opening at the end of barricade except at locations approved by Engineer-in-charge.

(Barricading for road widening work shall be measured separately). Barricading may be

required to be shifted laterally number of times as per site requirements/sequence of

works but payment will be made only on first installation. In case of variation in weight per

RM, the prorata rate adjustment will be made for 70% of cost

Note:(i) Barricades on either side shall be measured individually.(ii) Once barricade has

been provided and work started, removal of barricade is not permitted till completion of - -

pile, pile cap, pier and pier caps, portal beams, superstructure complete , till completion of

entire superstructure.(iii) While erecting barricade, the bottom gap between barricade

and road should be plugged with cement concrete from inside.(iv) Adequate blinking lights

(rope light) on barricade during night time must be ensured. The cost of this item should

GMRC Page 12 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

include provision for power pack / Genset etc. so as to ensure the blinking of lights in night

time as long as barricades are in position at the work spot.

(v) After completion of the entire work, the barricades shall be the property of the

contractor.(vi) Replacement of damaged barricades shall be done by contractor at his own - -

cost. Nothig shall be payable extra.It is specifically highlighted that barricading during

construction shall be limited to 8m to 10m width only, considering the traffic constraint.

This width applies to viaduct in straight portion. In station areas and on curves, the

barricading width and placing shall be as approved by the Engineer in consulation with the

traffic management.For barricading payment shall be made at 70% on erection of

barricade and 30% on removal of barricade as per the instructions of Engineer in-charge.

(i) For barricading payment shall be made at 70% on erection of barricade RM

(ii) 30% on removal of barricade as per the instructions of Engineer in-charge. RM

3 Submit colour photographs (Ground/Aerial) of the works as directed by the Engineer-in- Per

charge and supply at monthly intervals, or as instructed by the Engineer-in-charge. One set month 1,989.00 36.00

shall comprise one soft copy with three copies of prints (hard copy in Glossy paper) of each

photograph of size not less than 225 x 175 mm each. (40 to 50 nos per month).

4 Supply of Ground/Aerial video and DVDs/pendrive of 180 minutes duration comprising one Per

master copy and one extra copy as per technical specifications showing the progress of month 9,945.00 36.00

works as directed by Engineer-in-charge.

GMRC Page 13 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

5 Providing furnished office accommodation at site for the use of site engineer and his Per

supporting staff approximately of 700 sqm carpet area (fully air conditioned) including site month 4,55,000.00 36.00

office at casting yard with minimum two watchman and two office boy in each office for

24hrs and also as per increased on its requirement. Offices may be at single or multiple

locations as directed by the Engineer-in-charge.

Note: 1) The details of site office and furniture, computer equipment, software etc., to be

provided by the Tenderer, are shown in the "Employers requirement". - -

2) This furnished accommodation shall be provided by the Tenderer during the contract

period and also extended period of the contract.

3) For the extended period of contract, contractor will be paid only the actual expenditure

incurred for operating this item. No extra payment will be allowed.

6 Cutting, transporting of trees including primary root, stacking and handing over to the

concerned department as per instruction of Engineer-in-charge. - -

(i) Girth upto 30cm Nos.

(ii) Girth more than 30cm but upto 50cm Nos.

(iii) Girth more than 50cm but upto 75cm Nos.

(iv) Girth more than 75cm but upto 1.25m Nos.

GMRC Page 14 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

(v) Girth more than 1.25m but upto 2.4m Nos.

(vi) Girth More than 2.4m Nos.

7 Transplanting the marked trees of various species and girth to the place shown by

Engineer-in- charge/Engineer’s representative within a lead of 1.5km with all tools, plants, - -

man & machinery and necessary preparation such as preparation of earth ball of tree roots

of desired depth & diameters, dislodging, lifting, transportation and transplanting tree

from original place to the new place including all arrangements, tools & plants, labour etc.,

for successfully completing the work. The work includes excavating pits of adequate size,

arranging loose soil, mixing of manure, fertilizer, insecticides etc., to ensure survival of the

trees being transplanted. Maintenance of tree i.e., watering, manuring, soil heaping, spray

of insecticides shall be done for one year. All above operations shall be executed as per

(i) Girth upto 30cm Nos.

(ii) Girth more than 30cm but upto 50cm Nos.

(iii) Girth more than 50cm but upto 75cm Nos.

(iv) Girth more than 75cm but upto 1.25m Nos.

(v) Girth more than 1.25m but upto 2.4m Nos.

(vi) Girth More than 2.4m Nos.

Stage wise payment for the work will be as following:

30% after trees transplanted. - -

40% after sprouting & establishment of trees

30% after completion of maintenance period of one year.

GMRC Page 15 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

7(a) Extra over item no A.7 (above) for lead more than 1.5 km and upto 5 km for all girth for per km

transportation (per km) 663.00 50.00

8 Carryout Geo-technical investigation work (as and where required) including exploratory RM

drilling of 150 mm dia boreholes in all sorts of soil, ordinary rock and hard rock, up to 1,989.00 1,080.00

maximum depth as mentioned, collecting undisturbed samples and conducting standard

penetration tests alternate at an interval of 1.5 m. depth, conducting necessary laboratory

tests & field tests for all type of classification and determination of soil parameters like

density, shear and consolidation parameters if required, including submission of report in

three copies covering investigation data and recommendation for SBC and the pile capacity

considering the design criteria, all as per specification.

1)The rate is inclusive of submitting soil investigation report in three sets in hard copy as

well soft copies.

9 Traffic Signals, Signage Etc.

9(a) Providing & fixing of retro-reflective traffic sign boards using high intensity Retro Reflective sqm

Sheeting (encapsulated lens type) as recommended by IRC and MORTH on 2mm 7,186.40 250.00

Aluminium Substrate properly processed on front side of Aluminium substrate with

pressure sensitive Heat vacuum applicator. Logos and Borders may be out of cut-sheet or

screen printing with appropriate ink which should also have 7 years warranty. The Retro

Reflective traffic sign boards using high intensity Tape should have MS angle support of

size 25 x 25 x 3 mm or 35 x 35 x 4 mm depending upon the size.

9(b) Providing and fixing and maintaining the road infrastructure/furniture during executions,

refixing as where required. - -

GMRC Page 16 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

(i) Road delineator - Supply of Rectangular Metal Delineator (Black colour Rectangular Nos

Delineator with high intensity Reflective Sheet)Height: 1200 mm approx..Size: 100 x 40 mm 1,259.70 300.00

rectangular Reflective: 1 no. Band of 120 mm High Intensity Grade RedColour Reflective

tape and 3 Nos. Bande of 150 mm white colour paint.

(ii) Portable Signage - Supporting of Retro-Reflective Sign Board of size 900 mm Triangular or Nos

60 mm Dia Circle or 90 x 600 mm by using high intensity Retro Reflective Sheeting on 2 mm 4,641.00 200.00

thick Aluminium Substrate with M.S. Back Support frame

(iii) Reflective lights - Hazards warning Blinkers both sides (Rechargeable with 2 Nos. Nos

sealed maintenance free batteries) 1,989.00 500.00

(iv) Traffic Cones Nos

Square Base cone with heavy base of size 390 mm x 390 mm Height: 705 mm

Cone Colour: Red Colour (UV stabilized) - -

Body Material: Low Density Poly Ethylene

Reflective Part: 1 No. White colour Engineering Grade Reflective band of 125 mm width all

Note: - The specifications given in this BOQ item are not complete. In addition, the items

shall comply with the regulations and Tender Specifications. After completion of the entire - -

work, all the items will be the property of the contractor and he is also responsible for

shifting all such release materials away from the site.

9(c ) Deployment of adequate manpower for 8hrs shift for day and night management of traffic

at intersection, roadway influenced by contractor and traffic diversions at various levels. - -

GMRC Page 17 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

In-charge-(minimum 1) shift

Supervisor-(minimum 2) shift

Traffic Guards-(maximum 50 man days per day) shift

Note : The deployment to be done with prior approval of GMRCL and Traffic Police. The

personnel at above should be familiar with traffic rules and regulations the traffic signals

and road delineators shall be placed as per approved plan and shall be prepared as per

relevant code and Ahmedabad Traffic Police guideline.

10 Construction of rainwater harvesting well consisting of 4.5m internal dia, 4.5m deep with Each

1 no. 200 mm nominal dia. PVC plain screen pipe with ribs conforming to IS: 12818-1992, 2,69,312

upto sub soil water table, including boring etc. Earth work excavation upto required depth,

brick masonry 75 class brick in cement mortar 1:4 foundation concrete 1:4:8, 150 mm thick

RCC top slab with steel reinforcement, centering and shuttering 1 no. precast RCC EHD

manhole cover & frame, with 8 mm thick plastic encapsulated foot rest at the rate of

300mm c/c, 400 mm thick fine sand and 600mm thick stone aggregate (6mm to 40mm

nominal size), at bottom level complete as per detail drawings, nothing extra will be paid.

SCHEDULE A - TOTAL AMOUNT

SCHEDULE A - TOTAL AMOUNT

GMRC Page 18 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

GMRC Page 19 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Schedule B1 - FOUNDATION WORK

Item Description Unit Rate (excl. Quantity Amount (Rs.)

1 Providing Excavation for utility mapping and shifting based on site Cum

condition. This shall includes following items 423.42

1. Excavation through existing concrete/ water bound macadam road /

bituminous road / concrete road/soil/morrum/ hard rock /soft rock/ old

structures below ground as encountered of all thickness including

dismantling other structures, dead utilities, dewatering, pumping and

bailing out water, strutting and shoring, etc. for utility identification shall

be done by either manually or with necessary precautions so that existing

utility shall not damage. At each pier location sizes of excavation pits will

2. Temporary suppurt for utility if required.

3. utility mapping and submission of utility mapping in soft and hard copy

with plan,elevation and cross-sections coordinates in autocad and with

photographs for submission to DDC review.

4. If boring will required, same will be paid in separate item (Ref item no

5. If utility shifting is required it shall be paid under relevant BOQ item.

6. Back fill of excavated soil upto natural ground level with sufficient

compaction for required stability of piling rig during piling work.

2 Boring 100mm dia borehole, 8m deep at pile locations to find out RM

underground utilities as directed by Engineer in charge. 705.58

GMRC Page 20 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

3 Providing and installing cast-in-situ vertical bored piles as per approved - -

good for construction (GFC) drawing and with M35 grade of concrete (as

per specification) using OPC cement confirming to sulphate concentration

criteria as per Sl. No. (i) & (ii) of Table 4 of IS 456 and for high concetration

sulphate content the type of cement shall be used as per Sl. No. (iii), (iv) &

(iv) of Table 4 of IS 456, including all operations such as installation and

shifting of piling rig etc, in all type of soil strata/rocky strata along elevated

section. Minimum cement content shall be 380kg/cum. The cost includes

the cost of empty boring wherever required. (Measurement shall be from

cut-off level to founding level). The stated length includes test piles for

initial load tests. The item includes disposal of earth, muck, slush released

from piles, top cutted portion of pile at disposal ground for all leads.

Reinforcement shall be paid separately. Rate shall include cost of using

required dosage of admixture in concrete for obtaining required

workability as per approval of Engineer in charge. Rate shall includes

provision of A class MS pipes of 50mm outer diameter as per technical

specification, minimum 1.0mm thick (light) as per IS 1239M in all piles

at the time of casting to be used for cross-hole sonic test. Pipes shall

extend from ground level to bottom of pile where pipe shall be sealed

at bottom. Rate includes filling of tubes after sonic test using standard

cement non-shrink mortar before casting of pile cap. The item includes

drilling and socketing in rock at required depth. Idling of rig due to any

reason shall not be payable. Bore drilling shall be done by use of hydraulic

rig using temporary casing of required depth and polymer slurry. The item

includes the cost of polymer to be used for stabilisation of bore.

Note: 800mm dia/ 1000 mm dia /1200 mm dia /1500 mm dia/1800 mm - -

dia multiple pile foundation will be implemented. The lengths of each pile

diameter is indicative only and may vary at Detailed Design stage.

3.1 For 800mm dia Pile RM

3.2 For 1000mm dia Pile RM

GMRC Page 21 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

3.3 For 1200mm dia Pile RM

3.4 Extra over item no B3 (above) for providing M40 grade concrete for pile cum

instead of M35 grade concrete. (Minimum cement content shall be 390 350.83

kg/cum of concrete)

4 Providing and fixing permanent MS liner (of required thickness or as MT

directed by Engineer-in-charge) for 800/1000/1200/1500/1800 mm dia 1,04,401.90

bored cast-in-situ piles wherever required as per approved construction

drawings and directions of Engineer-in-charge all complete and applying a

primer coat of approved steel primer.

Measurement :- The liner shall be of MS plate, of required thickness or as - -

per drawings duly approved. The payment of liner shall be made in Kg as

per the area of the MS sheet provided in liner multiplied by density (78.5

kN/m3). The quoted rates will be applicable for all lengths provided upto

the soffit of pile cap. The measurement will be made for the actual length

of liner provided correct to one centimeter.

5 Carrying out static initial vertical load tests as per relevant IS Codes - -

including all arrangements for measuring deflections and submitting

reports as per specifications. This includes making of pile head ready for

testing at the desired level, supporting / reaction arrangement

(including reaction piles/soil/rock anchors, if any) for the kentledge

load. Cost of pile to be tested wil be paid in item B.3. The test

arrangements shall cater for additional 25% above test load)

(i) 800 mm dia pile (Test load of 680MT) Nos.

(ii) 1000 mm dia pile (Test load of 1200MT) Nos.

(iii) 1200 mm dia pile (Test load of 1800MT) Nos.

GMRC Page 22 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

6 Carrying out static initial lateral load tests as per relevant IS Codes - -

including all arrangements for measuring deflections and submitting

reports as per specification and tender drawing. This includes making of

pile head ready for testing at the desired level, supporting / reaction

arrangement (include reaction piles/ soil/ rock anchors, if any) for the

kentledge load. (Cost of test pile will be paid in item B.3 )

(i) 800 mm dia pile (Test load of 38MT) Nos.

(ii) 1000 mm dia pile (Test load of 50MT) Nos.

(iii) 1200 mm dia pile (Test load of 63MT) Nos.

7 Carrying out static routine vertical load tests as per relevant IS - -

Codes including all arrangements for measuring deflections and

submitting reports. This includes making of pile head ready for testing at

the desired level, supporting / reaction arrangement (incl. reaction

piles/soil/rock anchors, if any) for the kentledge load. The test

arrangements shall cater for additional 25% above test load.

(i) 800 mm dia pile (Test load of 375MT) Nos.

(ii) 1000 mm dia pile (Test load of 675MT) Nos.

(iii) 1200 mm dia pile (Test load of 975MT) Nos.

8 Carrying out static routine lateral load tests as per relevant IS Codes - -

including all arrangements for measuring deflections and submitting

reports. This includes making of pile head ready for testing at the desired

level, supporting / reaction arrangement (incl. reaction piles/ soil/ rock

anchors, if any) for the kentledge load.

(i) 800 mm dia pile (Test load of 23MT) Nos.

(ii) 1000 mm dia pile (Test load of 30MT) Nos.

GMRC Page 23 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

(iii) 1200 mm dia pile (Test load of 38MT) Nos.

9 Non destructive integrity testing of piles of 800mm/ 1000 mm/1200 mm Nos.

/1500mm /1800mm dia and as per specifications and submitting reports. 1,169.44

(Payment shall be made for number of pile tested)

10 Integrity pile test using cross-hole sonic logging for 0.8m, 1.0m, 1.2m, Nos.

1.5m, 1.8m diameter piles as per the provision of ASTM standard D6760, 8,770.78

as per drawings & technical specifications. (Payment shall be made for

number of pile tested)

11 Providing M-15 grade concrete (as per specification) for minimum cum

75mm thick PCC below pile cap, open foundation slabs and ramp 4,735.93

foundations extending 75mm all around beyond pile cap, open foundation

slabs and ramp foundations. Rate shall include cost of using required

dosage of admixture in concrete for obtaining required workability as

per approval of Engineer.

11a Providing M-15 grade concrete (as per specification) for minimum cum

75mm thick PCC below open foundation/ raft/ combined foooting for 4,735.93

other than station box area (i.e. entry- exit structures. water tanks,

escalator, lift pits, staircases pump house etc) extending 75mm all

around footing. Rate shall include cost of using required dosage of

admixture in concrete for obtaining required workability as per approval

GMRC Page 24 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

12 Providing M-35 grade, reinforced cement concrete (as per specification) cum

using OPC cement confirming to sulphate concentration criteria as per 6,948.92

Sl.No. (i) & (ii) of Table 4 of IS 456 and for high concetration sulphate

content the type of cement shall be used as per Sl. No. (iii), (iv) & (iv) of

Table 4 of IS 456, for pile cap including excavation through existing

concrete/ water bound macadam road / bituminous road / concrete road

/soil/morrum/ hard rock /soft rock/ old structures below ground as

encountered of all thickness including dismantling other structures, dead

utilities, dewatering, pumping and bailing out water, strutting and shoring,

curing etc.Minimum cement content shall be 380kg/cum. The item also

includes formwork and backfilling in foundation with quarry dust/sand

including watering, compacting with a vibratory plate compactor. The Cost

includes cutting/chipping of pile up to cut off level or up to good concrete

and built up of pile up to required level. The cost includes loading,

unloading and disposal of surplus excavated material along with pile heads

using covered trucks to contractor's dumping yard, / disposal of surplus

excavated material at with all leads and lifts and as directed by the

Engineer-in-charge or anyother dumping ground as directed by Engineer

within 40 Km of the alignment. The contractor should ensure that during

transportation the carried material does not spill out. Reinforcement shall

be paid separately. Rate shall include cost of using required dosage of

admixture in concrete for obtaining required workability as per approval

of Engineer-in-charge. (6% of the amount shall be withheld. Out of this,3

% of the amount shall be released after disposal of excavated material

including pile head material at contractor's dumping yard and 3 % of the

amount shall be released after restoration works on pile caps). Rate

includes restoration of road work over the excavation zone for pile cap i.e.

GSB and WMM over sand filling as per the instruction of the Engineer.

(i) 94% on pile Cap casting -

(ii) 3% on disposal exavted material -

(iii) 3% on restoration work -

GMRC Page 25 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

12 (a) Extra over item no 12 (above) for providing M45 grade concrete for pile cum

cap instead of M35 grade concrete. (Minimum cement content shall be 350.83

410 kg/cum of concrete)

12.(b) Providing M 35 grade, reinforced cement concrete (as per cum

specification) using OPC cement confirming to sulphate concentration 6,948.92

criteria as per Sl.No. (i) & (ii) of Table 4 of IS 456 and for high concetration

sulphate content the type of cement shall be used as per Sl. No.

(iii), (iv) & (iv) of Table 4 of IS 456, for pile cap / open foundation/

raft/ combined foooting for other than station box area (i.e. entry-

exit structures. water tanks, escalator, lift pits, staircases pump

house, FOB's etc) including excavation through existing concrete/

water bound macadam road / bituminous road / concrete road

/soil/morrum/ hard rock /soft rock/ old structures below ground as

encountered of all thickness including dismantling other structures,

dead utilities, dewatering, pumping and bailing out water, strutting and

shoring, curing etc. Minimum cement content shall be 380kg/cum. The

item also includes formwork and backfilling in foundation with

earth/quarry dust/sand including watering, compacting with a vibratory

plate compactor. The cost includes loading, unloading and disposal of

surplus excavated material using covered trucks to contractor's dumping

yard with all leads and lifts and as directed by the Engineer-in-charge. The

contractor should ensure that during transportation the carried material

does not spill out. Reinforcement shall be paid separately. Rate shall

include cost of using required dosage of admixture in concrete for

obtaining required workability as per approval of Engineer-in-charge. (6%

of the amount shall be withheld. Out of this,3 % of the amount shall be

released after disposal of excavated material including pile head material

at contractor's dumping yard and 3 % of the amount shall be released

after completing road restoration works. Rate includes restoration of road

work over the excavation zone. (Minimum cement content shall be

kg/cum of concrete)

GMRC Page 26 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

12 (c) Extra over item no 12 b (above) for providing M45 grade concrete for pile cum

cap instead of M35 grade concrete. (Minimum cement content shall be 350.83

410 kg/cum of concrete)

13 For all RCC items of schedule B1, minimum cement content has been Kg 6.21

specified. For any extra /less cement above or below the minimum

specified cement content, addition/deduction shall be paid under this

SCHEDULE B1 - Total Amount

SCHEDULE B1 - Total Amount

GMRC Page 27 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026

GMRC Page 28 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Schedule B2 - IN-SITU CONCRETE WORK

Item Description Unit Rate (excl. Quantity Amount (Rs.)

1 Providing and laying M-40 grade cement concret (as per technical cum 8,128.00 1931.93

specification) for reinforced cement concrete crash barrier/pier protection all

round the pier leaving a gap of 25mm min between and following the pier shape

exactly on at grade road as specified in drawings, including centering,

shuttering, compaction, scaffolding, curing and all related operations as

required to complete the work. The gap shall be filled with either coarse sand or

compressible filler board of high density as directed by Engineer in charge or as

per GFC drawings. Rate includes the cost of required dosage of admixture

in concrete for obtaining required workability and cost of compressible fibre

board or coarse sand as per specification and approval of Engineer in

charge.Reinforcement will be paid separately.

Minimum cement content shall be 390 kg/cum of concrete.

GMRC Page 29 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

2 Providing and laying M-55 grade reinforced cement concrete (as per cum 9,227.00 19506.90

specification) for Viaduct & Station piers (standard pier, portal pier, &

cantilever pier, Cantilever pier cap, Standard Pier cap, Column from concourse

slab to platform level, Pedestals) etc and column for stations including

shuttering scaffolding and all related operations required to complete the work

at all levels including centering, shuttering, propping, staging, scaffolding,

compaction, curing, necessary tools, plants, machinery and all related

operations etc.for all heights using steel material for shuttering & steel props.

Form work to be designed in a such way that traffic on road is allowed during

the work at all times. Rate includes cost of providing grooves if required (the

ribs/grooves in pier shutter if required, shall be as per drawing).

Reinforcement shall be paid separately. Rate includes cost of using

required dosage of admixture in concrete for obtaining required

workability, curing compound as per specification & approval of Engineer in

charge. Minimum cement content shall be 440 kg/cum of concrete.

Note:(i) No cold joints are permitted. However cold joint at the junction of " pile - -

cap-pier" and at the top surface of the starter of pier (which is normally less

than 2m length), cold joints are unavoidable. In that case old concrete

surface should have adequate shear keys depressions,reinforced dowels

and a layer of concrete bonding compound. Concrete retarder compound

may also have to be used at the concrete surface of starter pier above the pile

cap.The rate is inclusive of all above bonding agents/methods. However if

any additional cold joints are unavoidable due to the reasons not beyond

the control of contractor, all above bonding measures shall be on account of

the contractor.

(ii) Concreting must be carried out using concrete pumps or concrete placer

GMRC Page 30 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

2(a) Extra over item no 2 (above) for providing M60 grade reinforced cement cum 819.00 500.00

concrete instead of M55 grade concrete. Minimum cement content shall be

450kg/cum of concrete.

2(b) Deduction for Providing M40/20 concrete instead of M55/20 concrete in above Cum -241.00 500.00 -1,20,500.00

Concrete items. Minimum cement content shall be 390 kg/cum of concrete.

3 Providing and laying M 40 grade reinforced cement concrete (as per cum 8,439.00 5258.40

specification) for station beam and slab (Beam/slab at concourse level, wall

and slab for Lift, beam and slab for staircase & escalator, Beam/slab/

parapet wall at Platform Level, Parapets, Pedestals at Platform Level, Cable

Trough etc) including shuttering scaffolding and all related operations

required to complete the work at all levels including centering, shuttering,

propping, staging, scaffolding, compaction, curing, necessary tools, plants,

machinery and all related operations etc.for all heights using steel material for

shuttering & steel props. Form work to be designed in a such way that traffic on

road is allowed during the work at all times. Rate includes cost of providing

grooves if required (the ribs/grooves in pier shutter if required, shall be

as per drawing) and sleeves with different diameters. Reinforcement shall

be paid separately. Rate includes cost of using required dosage of

admixture in concrete for obtaining required workability, curing compound

as per specification & as per specifications includes loading, unloading and all

complete as per approved drawings and specifications.

Minimum cement content shall be 390 kg/cum of concrete.

GMRC Page 31 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

4 Providing M 55 grade reinforced cement concrete for Reinforced concrete (as cum 10,264.00 804.00

per specification) for portal beam (integral to pier)/ Pier Cap including

shuttering scaffolding and all related operations required to complete the

work at all levels including centering, shuttering, propping, staging, scaffolding,

curing, necessary tools, plants, machinery and all related operations etc.for all

heights using steel material for shuttering & steel props. Form work to be

designed in a such way that traffic on road is allowed during the work at all

times Rate includes required dosage of admixture in concrete for obtaining

required workability as per approval of Engineer in Charge. Reinforcement

will be paid separately.Minimum cement content shall be 440 kg/cum of

4.b Extra over item no 4 (above) for providing M60 grade reinforced cement cum 819.00 100.00

concrete instead of M55 grade concrete.

Minimum cement content shall be 450 kg/cum of concrete.

5 Providing M 55 grade reinforced cement concrete (as per technical cum 10,310.00 1295.00

specification) for Pedestals and Shear Key/Seismic Stopper including centering,

steel shuttering, scaffolding and all related operations as required to complete

the work as specified in drawings. Reinforcement shall be paid separately. Rate

includes required dosage of admixture in concrete for obtaining required

workability as per approval of Engineer in charge.

Minimum cement content shall be 440 kg/cum of concrete.

GMRC Page 32 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

6 Providing M50 grade reinforced cement concrete (as per technical specification) cum 10,801.00 3492.75

for deck slab over Precast I Beams/Steel beams & cross-girder/FOB's etc

including centering, steel shuttering, scaffolding and all related

operations as required to complete the work as specified in drawings.

Rate includes provision of formwork of steel/concrete for casting of slab.

Reinforcement shall be paid separately. Rate includes required dosage of

admixture in concrete for obtaining required workability as per approval of

Engineer-in-charge.Minimum cement content shall be 430 kg/cum of concrete.

7 Providing M45 grade reinforced cement concrete (as per technical specification) cum 7,605.00 4943.40

for other than station box area (i.e. entry- exit structures. water tanks,

escalator, lift pits, staircases pump house etc) including centering, steel

shuttering, scaffolding and all related operations as required to complete the

work as specified in drawings. Rate includes provision of sacrificial formwork of

steel/concrete for casting. Reinforcement shall be paid separately. Rate includes

required dosage of admixture in concrete for obtaining required workability as

per approval of Engineer-in-charge.

Minimum cement content shall be 410 kg/cum of concrete.

8 Providing reinforced cement concrete for stitch concrete (all types and levels),

upstands (all types and levels), Diaphargm and similar elements, complete

with centering, steel shuttering, scaffolding, sacrificial formwork (steel/concrete

as required), and all related operations as per drawings and specifications.

Reinforcement shall be paid separately. Rate includes approved admixture

dosage for required workability as per Engineer-in-charge’s approval.

GMRC Page 33 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

a) M40 grade reinforced cement concrete (Minimum cement content shall be 390 Cum 8,128 4728.33

kg/cum of concrete)

b) M50 grade reinforced cement concrete (Minimum cement content shall be 430 Cum 9,196 250.00

kg/cum of concrete)

c) M55 grade reinforced cement concrete (Minimum cement content shall be 440 Cum 10,264 250.00

kg/cum of concrete)

9 For all RCC items of schedule B2, minimum cement content has been specified. Kg 6.21 105240.00

For any extra /less cement above or below the minimum specified cement

content, addition/deduction shall be paid under this items.

10 Providing, fabricating, supplying, transporting, placing and fixing galvanized sqm 609 7740.00

corrugated steel deck sheets instead of conventional temporary centering,

steel shuttering and scaffolding over Precast Beams/I-girder/Steel girder/cross-

girder/pie-girder etc as per the instruction of Engineer incharge. for casting of

RCC deck slab, including cutting, bending, lapping, fastening to girders with

shear studs/clips/self-drilling screws, providing edge trims, closures and all

accessories complete as per approved drawings and specifications. The rate

shall include all labour, materials, equipment, handling, wastage, staging

required for fixing, and all incidental works necessary for completion of the

item, measured in square metres of deck slab. The rate includes material,

labour. machinery, accessroies, fixtures etc at all levels and locations, all

complete as per instructions of Engineer Incharge.

SCHEDULE B2 - Total Amount

SCHEDULE B2 - Total Amount

GMRC Page 34 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026

GMRC Page 35 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Schedule B3 - PRECAST CONCRETE WORK

Item Description Item Rate (excl. GST) Quantity Amount (Rs.)

1a Establishment of casting yard; LS 1.00

Establishment of casting yard for all precast elements including batching plant -

for concrete production, storages, labs, office and other facilities to execute

the work as per good engineering practices and as approved by engineer to

ensure production and storage of all precast element to achieve the specified

key dates, comprising as mentioned below, which shall be increase/decrease

with approval of Engineer-in-charge, suitably to suit the construction schedue

for achieving the Key Dates (KDs)

A. Casting bed for U -girder - 36 nos. -

B. Casting bed for pier cap - 8 nos

C. Casting bed for I girder - 6 nos. I Girder

D. Batching plant capacity should be minimum 60 cum/hour & 30 cum/hour

The payment of this item shall be made as under

A. Developing access -10%

B. Establishing bed for U grider, I girder, pier cap and gantries - 40%.

C. Establishing of batching plant, labs, office - 30%

D. Completion of full facilities as approved by engineer -20%.

The amount shall be paid against the indemnity bond.

1.b Recovery against payment of establishment of casting yard LS -7,50,00,000.00

Recovery against payment of establishment of casting yard @ 15000000 in 5 -

GMRC Page 36 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

2 Providing M55 grade reinforced cement concrete (as per technical cum 12,598.21 9198.00

specification) Precast Prestressed Pier Cap/Precast portal beam including

shear key, pedestals, in-situ connection with pier. The item includes lifting the

pier caps from the mould and shifting the same to the stacking yard. The item

includes provision of holes for lifting and filling of holes after erection using

non-shrink grout. Reinforcement, strands, cables, anchorages and sheathing

shall be paid separately. Rate includes cost of using required dosage of

admixture in concrete for obtaining required workability as per approval of

Engineer-in-charge and all related operations as required to complete the

work as per drawing & specifications. The cost includes centering,

shuttering, scaffolding, providing cutouts where specified, curing

arrangements as required, steam curing arrangement if deemed necessary,

all handling etc. complete.Minimum cement content shall be 440 kg/cum of

3 Transporting precast Standard Pier Caps/Precast portal beam from the MT 1,475.35 22995.00

casting yard / storage yard to the work site, erection in position including the

cost of all temporary supports, erection equipment, lifting cranes,

transporting etc, positioning and fixing on pier with cement concrete of M55

grade. The weight shall be calculated assuming concrete density of 2.5 t/m³.

Shifting within the site/ yard is the responsibility of the contractor and shall not

be paid separately.

GMRC Page 37 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

4 Providing M55 grade reinfoced cement concrete (as per technical Cum 12,598.21 64464.00

specifications) for U-Girder of all simply supported spans (straight or curved) in

the casting yard including provision of shear connector for secondary pour

concrete (rail plinths), additional bars for earthing, bars/ strands/ hooks for

lifting of U-Girder, cutting of bars/ strands/ hooks after transportation and

sealing of lifting recess as specified in drawings, lifting the full spans from the

mould and shifting the same to the stacking yard. Reinforcement, strands,

debonding tubes, anchorages and sheathing shall be paid separately. Rate shall

include the cost of using reuired dosage of admixture for obtaining required

workability as per approval of Engineer in charge and all related operations as

required to complete the work as per drawings and specifications. Rate

includes cost of providing grooves/logo of client if required (the

ribs/grooves/logo in shutter if required, shall be as per drawing). Minimum

cement content shall be 440 kg/cum of concrete.

5 Providing HDPE debonding tubes for prestressing strands (to be cut-off RM 32.74 535846.97

flush to concrete after casting), epoxy based sealing compound at edges of

strand and epoxy putty to avoid slurry ingress during concreting. The quantity

given is the net length of tubes without extra tube length required

during construction. Rate includes filling HDPE tubes with grease as specified

6 Transporting precast full span U-Girder from the casting yard to work site, MT 1,286.38 161160.00

erection in position by using launching girder and shall not take any support

from ground / Road including the cost of all temporary supports, erection

equipment, lifting cranes, transporting etc, and positioning on bearings etc for

viaduct into completed structures conforming to required lines, grades and

dimensions complete as per drawings and specifications. The weight shall be

calculated assuming concrete density of 2.5 t/m³. Shifting within the site / yard

is the responsibility of the contractor and shall not be paid separately.U Girder

shall be launched/ Erected by using Lauching Girder and shall not take any

support from Ground or Road

GMRC Page 38 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

7 Providing, pre-casting and curing precast RCC beams concrete (cement as per cum 11,584.00 8123.50

technical specification) of all types I-Beam, Pie beams, L- beams, T- beams,

Rectangle beam etc. wherever required, complete of M40/20 grade for

Superstructure/Portal/Station Beams including shuttering and formwork etc.

Reinforcement shall be paid separately. Rate shall include cost of using

required dosage of admixture in concrete for obtaining required workability as

per approval of Engineer.

Minimum cement content shall be 390 kg/cum of concrete.

8 Providing, pre-casting and curing precast Pre tensioned / Post tensioned cum 11,705.00 10410.40

beams concrete (cement as per technical specification) of all types I-Beam, Pie

beams, L- beams, T- beams etc. complete of M50/20 grade for

superstructure/Portal/Station Beams etc. including shuttering and formwork

etc. Reinforcement shall be paid separately. Rate shall include cost of using

required dosage of admixture in concrete for obtaining required workability as

per approval of Engineer.

Minimum cement content shall be 430 kg/cum of concrete.

9 Transporting and erection of I-Beam, Pie beams, L- beams, T- beams, RCC- MT 1,286.38 46334.75

Beams, any other precast beams etc. into completed structures conforming to

required lines, installation of Spherical/POT PTFE/ all types of bearings etc. as

per the manual of bearing manufacturer under the supervision of bearing

manufacturer and as directed by the Engineer, grades and dimensions

complete as per drawings and specifications.

GMRC Page 39 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

10 Providing M55 grade reinforced cement concrete (as per technical cum 13,466.43 6192.00

specification) for casting and curing of Precast PSC I-Girder (Post

tensioned) with tapering width of all types (straight or curved spans as

per approved GAD) in the casting yard including provision of lifting the

girders from the mould and shifting the same to stacking yard. Prestressing

strands / cables / systems and reinforcement shall be paid separately. Rate

includes cost of lifting hook, using required dosage of admixture in

concrete for obtaining required workability as per approval of Engineer in

charge. Note : Type, size and number of shutter moulds shall be as per the GFC

drawings and nothing extra is payable.Minimum cement content shall be

kg/cum of concrete.

11 Transporting Precast PSC I-Girder from the casting yard to work site, MT 1,052.49 15480.00

erection in position including the cost of all temporary supprots, erection

equipments, lifting cranes, transporting etc, positioning on bearings and fixing

on pier. The weight shall be calculated assuming concrete density of 2.5 t/m3.

Shifting within the site/yard is the responsibility of contracor and shall not be

paid separately.

12 Providing M50 grade reinfoced cement concrete (as per technical Cum 12,736.00 693.00

specifications) for Precast Slab panel at concourse / Platform levels of typical

station of all simply supported spans (straight or curved) and Precast

Staircases in the casting yard including provision of shear connector for

secondary pour concrete, additional bars for earthing, bars/ strands/ hooks for

lifting of precast slab, cutting of bars/ strands/ hooks after transportation

and sealing of lifting recess as specified in drawings, lifting the full spans

from the mould and shifting the same to the stacking yard.

Reinforcement, strands, debonding tubes, anchorages and sheathing shall

be paid separately. Rate shall include the cost of using reuired dosage of

admixture for obtaining required workability as per approval of Engineer

in charge and all related operations as required to complete the work as

per drawings and specifications.

Minimum cement content shall be 430 kg/cum of concrete.

GMRC Page 40 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

13 Transporting precast Slab panel / Staircases from the casting yard to work site, MT 898.00 1732.50

erection in position including the cost of all temporary supports, erection

equipment, lifting cranes, transporting etc, and positioning on bearings/ steel

plates etc conforming to required lines, grades and dimensions complete as per

drawings and specifications. The weight shall be calculated assuming

concrete density of 2.5 t/m³. Shifting within the site / yard is the

responsibility of the contractor and shall not be paid separately

14 Providing M60 grade reinforced cement concrete (as per technical cum 12,667.32 11046.00

specification) for casting and curing of Precast pier arm / Cross Arm / Cross

Girder etc. of typical station (Post tensioned) including in-situ connection

with pier/column with tapering sction of all types in the casting yard

including provision of lifting the Pier arm from the mould and shifting the same

to stacking yard. Prestressing strands / cables / systems and reinforcement

shall be paid separately. Rate includes cost of lifting hook, using required

dosage of admixture in concrete for obtaining required workability as per

approval of Engineer in charge. Note : Type, size and number of shutter

moulds shall be as per the GFC drawings and nothing extra is payable.Minimum

cement content shall be 450 kg/cum of concrete.

15 Transporting Precast pier arm of typical station from the casting yard to work MT 1,475.35 27615.00

site, erection in position including the cost of all temporary supprots, erection

equipments, lifting cranes, transporting etc, positioning on pier. The weight

shall be calculated assuming concrete density of 2.5 t/m3. Shifting within the

site/yard is the responsibility of contracor and shall not be paid separately.

GMRC Page 41 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

16 Providing M55 grade reinforced cement concrete (as per technical cum 12,598.21 5174.40

specification) for casting and curing of Precast PSC U-girder (Post

tensioned) with tapering width of all types (straight or curved spans as

per approved GAD) in the casting yard/at site including provision of lifting the

girders from the mould and shifting the same to stacking yard. Prestressing

strands / cables / systems and reinforcement shall be paid separately.

Rate includes cost of lifting hook, using required dosage of admixture in

concrete for obtaining required workability as per approval of Engineer in

charge. Note : Type, size and number of shutter moulds shall be as per the

good for construction (GFC) drawings and nothing extra is payable. Minimum

cement content shall be 440 kg/cum of concrete.

17 Transporting Precast PSC U-girder (Post tensioned) from the casting yard MT 1,286.38 12936.00

to work site, erection in position including the cost of all temporary

supprots, erection equipments, lifting cranes, transporting etc, positioning

on bearings and fixing on pier. The weight shall be calculated assuming

concrete density of 2.5 t/m3. Shifting within the site/yard is the responsibility

of contracor and shall not be paid separately.

18 Providing M40 grade reinforced cement concrete (as per techinical cum 11,118.46 2064.00

specification) for concreting, curing, transporting, lifting, installing precast

parapet over Deck slab on both side of viaduct, including transition span as

per the drawing in all precast psc I-girder/steel girder spans (straight or

curved), with all leads. The cost includes shuttering, scaffolding, special

adjustable props for alignment of units, moulds, providing cut outs, bolts &

inserts for fixing signalling mast, curing, required dosage of admixture for

concrete, all handling, and fixing in position, etc. complete) with cast in situ

stitch concrete of same grade.Note: Payment at 50% of accepted rate on

casting and Balance 50% on completion of erection, stitch concrete and related

works. Rate includes cost of providing grooves/logo of client if required (the

ribs/grooves/logo in shutter if required, shall be as per drawing).Minimum

cement content shall be 390 kg/cum of concrete.

GMRC Page 42 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

19 Transportation, erection and installation of precast parapets over already MT 1,037.82 5160.00

erected superstructure(psc i- girder/steel girder portion) conforming to

required lines, grades and dimension complete as per drawings and

specifications including cast in situ stitch concrete of same grade including cast

in situ stitch concrete of same grade. The weight shall be calculated assuming

concrete density of 2.5 t/m³. Shifting within the site/yard is the responsibility of

the contractor and shall not be paid separately

20 For all RCC items of schedule B3, minimum cement content has been specified. Kg 6.21 172776.00

For any extra /less cement above or below the minimum specified cement

content, addition/deduction shall be paid under this items.

17 Load test of PSC I-Girder/Pie Girder/ T Girder spans of any length including Nos 2,87,681.63 3.00

making all arrangement and conducting satisfactory Load Testing of girder

(simply supported span constructed by I-Girders), erected in position on the

piers at site, including arrangement for application of actual design

serviceable vertical load, arrangement for measurement of deflection at

various salient points of the girder and submitting a report. The details

of placement, position, increment of load on the girder and installation of

measurement devices etc and additional measures (such as temperature

measures) shall be as directed by the Engineer. After completion of the test all

the materials used for the load testing shall be removed and site shall be made

clear. Rate shall include submission of method statement and third party

certification of the test.

GMRC Page 43 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

18 Load Test of U-girder spans of any length including making all arrangement and Nos 2,87,681.63 6.00

conducting satisfactory Load Testing of U-girder, erected in position on the

piers at site, including arrangement for application of actual design serviceable

vertical load, arrangement for measurement of deflection at various salient

points of the girder and submitting a report. The details of placement, position,

increment of load on the girder and installation of measurement devices etc.

shall be as directed by the Engineer. After completion of the test all the

materials used for the load testing shall be removed and site shall be made

clear. Rate shall include submission of method statement and third party

certification of the test.

19 Load Test of Precast Slab Panel including making all arrangement and Nos 2,87,681.63 1.00

conducting satisfactory Load Testing of Precast slab panel, erected in position

on the piers at site, including arrangement for application of actual design

serviceable vertical load, arrangement for measurement of deflection at

various salient points and submitting a report. The details of placement,

position, increment of load on the girder and installation of measurement

devices etc. shall be as directed by the Engineer-in-Charge. After completion of

the test all the materials used for the load testing shall be removed and

site shall be made clear. Rate shall include submission of method statement

and third party certification of the test.

GMRC Page 44 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

20 Load Test of Steel Plate girder/ OWG Span of any length including Nos 2,87,681.63 2.00

making all arrangement and conducting satisfactory Load Testing of steel

girder span, erected in position on the piers at site, including arrangement for

application of actual design serviceable vertical load, arrangement for

measurement of deflection at various salient points of the girder and

submitting a report. The details of placement, position, increment of load on

the girder and installation of measurement devices etc. shall be as

directed by the Engineer-in-Charge. After completion of the test all the

materials used for the load testing shall be removed and site shall be made

clear. Rate shall include submission of method statement and third party

certification of the test.

SCHEDULE B3 - Total Amount

SCHEDULE B3 - Total Amount

GMRC Page 45 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026

GMRC Page 46 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Schedule- B4 REINFORCEMENT AND PRESTRESSING STEEL

Item Description Unit Rate (excl. Quantity Amount (Rs.)

1 Providing TMT reinforcement steel of Fe-550D Grade conforming to MT 72,648.00 50,164.15

IS1786 (latest) from approved list of supplier, cost of material,

royalty, transportation, handling, storing, straightening, cutting,

bending, tying, lap/butt welding, placing in position including 18 gauge

GI binding wire in diamond form at each reinforcement junction in all

structural concrete at all heights and depths with all leads complete as

directed. Rate shall also include welding involved towards stay

current protection effects as per system approved by Engineer-in-

charge. The rate shall also include the cost of binding wire, labour, all

material, tools and plants, all leads, lift etc. as per drawings and

technical specification as directed by Engineer-in-charge. The rate shall

also include protective coating as per technical specifications. This item

is applicable for all components of viaduct, station box area and other

than station box area (i.e. entry- exit structures. water tanks, escalator,

lift pits, staircases pump house etc)

GMRC Page 47 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Note:(i) No laps, joints are permitted in rebars provided in -

superstructures, piers, portals, pier arm, portal beams. However,

mechanical couplers are to be used without extra cost.(ii) For pile

reinforcement, welding of lap joint shall be without extra cost.

Additional rings required for handling the rebar cage shall be the

responsibility of the contractor and shall not be paid separately.(iii) For

other structural members, lap joints are permitted for bar dia <

20 mm, (including 20 mm), else, mechanical couplers are to be

provided, where in rebar ends shall be cold forged with die.(iv) The

cost includes all welding and providing mechanical couplers, all types of

laps, standard laps, chair, spacers, bend deduction as per IS-SP 34 etc.,

as required and nothing extra is payable on this account.v) Steel

considered for foundations is 30% (approximately) out of total quantity

for the purpose of processing variation of quantities.

2 Supplying and threading uncoated stress-relieved low relaxation steel MT 1,29,124.52 3,531.77

confirming to IS: 14268, class - 2 from approved supplier in precast

pretensioned U-girder/slab panels/T-girder/L-girder etc. for simply

supported spans including spacers, anchorages, stressing using

approved system and all related operations to complete the work.

This item includes providing and fixing all strands, de-bonding

arrangements (de-bonding tubes etc), required anchorages for

live and dead ends, stressing upto required level using all tools

and equipments and consumables cement grouting as per

specification and as directed by the Engineer-in-charge. Rate includes

filling de-bonding type with grease as specified in ASTM and taping at

the ends of the strand. Rate includes the testing complete- load

transfer, anchorage efficiency etc.

GMRC Page 48 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

3 For U-girder/I-girder/Pier-cap/Cross-Arm/Portal beam/T-girder/pie- MT 1,42,026.43 1,298.73

girder/L-girder etc.: Supplying and post tensioning uncoated stress-

relieved low relaxation steel conforming to IS :14268, class 2 from

approved supplier including providing corrugated HDPE sheathing

duct for cable system of 27K15, 19K15, 12K15, 7K15, 19K13, 12K13,

7K13 with couplers & vent pipes, spacers, anchorages, stressing using

grouting, recess filling, epoxy protection of anchorages and all

related operations to complete the work. (Note: the details shown

on the drawing may change and nothing extra will be paid to the

contractor on this account).

SHEDULE B4- Total Amount

SHEDULE B4- Total Amount

GMRC Page 49 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026

GMRC Page 50 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Schedule B5- STRUCTURAL STEEL

Item Description U nit Rate (excl. Quantity Amount (Rs.)

1 Fabrication, Supply & Erection of Steel Plate girder spans. Procurement and fabrication MT 1,44,480.88

of steel members for Steel Plate girder Bridge Work using structural steel plates

(conforming to IS-2062-Grade B0 E 410) & structural steel rolled section (conforming to

IS-2062-Grade B0 E 250) to the required profile and shape as called for including the

shear studs profiled from the rods and erection of fabricated girders at specified site

locations. This item includes preparation of fabrication shop drawings, necessary

templates, all cutting, welding (using automatic submerged arc welding), grinding & all

equipments and operations etc required to complete the job. This item also includes all

tests on materials and welded fabricated parts as required. This item also includes

application of sand blasting on materials, application of primer and various coats of

internal and external painting in fabrication shop and site as per technical specification

in chapter of structural steel. This item includes all necessary equipment required to

complete the job including procurement, testing and supply of HSFG bolts (class 8.8 and

above) and its compatible nuts and washers.

This item also include erection of the fabricated plate girder to the required profile and

shape as called for at designated site location including loading, transportation of all

structural steel members from fabrication shop to site and unloading; preparation of

erection scheme drawings, setting of storage yard at site if required & all equipment and

operation etc.required to complete the job. This item also includes temporary

support/staging, staging braces, bracing to permanent work, strutting, tying or anchor

bolts, fasteners, welding, temporary foundations required for erection. This item also

includes the field bolting at erection site as per specifications including all connections

required between steel plate girder and bearings.

The structural steel to be used shall be procured from the approved manufacturer as per

contract provision. For payment purpose, nominal weight of the girder as per drawing

will only be considered.

GMRC Page 51 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Payment Terms shall be as follow: -

1) 50% shall be paid on fabrication of truss/girder components after inspection and

2) 10% shall be paid on Primer and painting of truss/girder components after inspection -

3) 5% shall be paid on receipt of fabricated and painted truss/girder components at site. -

4) 30% shall be paid on erection of truss/girder components by bolts and drifs and fixing -

permanent fastner.

5) 5% shall be paid on completion of balance work. -

Note:- Only steel which is erected and part of permanent structure will be measured - -

Note:- Any additional temporary structure which will be required for erection / -

launching of fabricated part or complete plate girder and the provision of the

connection of the same to the permanent work by welding the same or making holes as

per the approved launching scheme will be done by tenderer. No payment will be made

for such operations.

2 Providing , fabricating and erecting structural steel for hand/safety railing and other MT 1,11,168.75 810.47

structural members for viaduct including transition span consisting of tubular and

rolled sections profiled to require shape, inserts, plates with welded hold fasts for walk-

way, earth terminal plates, insert plates with welded hold-fasts, internal threaded

sleeves including MS bolts tightened by Torque wrench and primer coat & three coats

of enamel paint of approved make and colour as per specification and drawing, with

all lead and lifts and as per the directions of engineer. The rate includes required

surface preparation (sand blasting).

Note: All structural steel shall be Hot Dip galvanized conforming to IS-802 (Part II ),

IS:5358 and IS:4759. and the mass of zinc coating shall not be less than 500 g/sq.m.

GMRC Page 52 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

3 Providing, fabricating and erecting structural steel inserts for cable tray, inserts for cable MT 1,11,168.75 425.93

ducts, inserts for signalling mast steel brackets over parapet for fixing street light,

earthing arrangement consisting of plates with welded hold fast, welded headed nuts,

internal threaded sleeve, studs in the form of U bars, bolts (class 4.6) etc..

Note: All structural steel shall be Hot Dip galvanized conforming to IS-802 (Part II ),

IS:53548 and IS:4759 and the mass of zinc coating shall not be less than 500 g/sq.m.

Note: Some inserts fabricated by other agencies which have to be incorporated in the

precast segments/ cast- in-situ spans /piers/ pile cap/pile would have to be handed over

to the contractor for placement and fixing in the reinforcement cage/ shuttering before

concreting. No extra paymet will be made for such inserts.

4 Providing, fabricating and Erection of structural steel Foot Over Bridge (FOB) as per MT 1,44,480.88 693.00

grade defined in drawing i.e. E250 BR and tube section YST 310 complete. This rate also

includes preparation of shop drawings procurement of raw materials sand blasting,

painting, trail assembly and all other activities.This item includes all necessary equipment

required to complete the job including procurement, testing and supply of HSFG bolts

(class 8.8 and above) and its compatible nuts and washers. This item is also applicable for

station box and entry/exit structure wherever required as per the direcction and apporval

of engineer incharge.

i) Procurement and testing of Steel Quantities=45%

ii) On Completion of Fabrication of Steel Wotrk=20%

iii) Transporation and receipt of Fabricated Material at Site=10%

iv) Final Erection of Pre-Engineered Steel=25%

SCHEDULE B5 - Total Amount

SCHEDULE B5 - Total Amount

GMRC Page 53 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Schedule B6 - BEARINGS

Item Description Unit Rate (excl. GST) Quantity Amount (Rs.)

1 Elastomeric bearings

Supply and fixing in position true in line & level, Elastomeric

bearings of approved make, placing and fixing in location as per

specification/ drawings and as directed by the Engineer in charge.

For elastomeric bearing below superstructure Cucm 0.54 43415317.48

For elastomeric bearing on sides of shear key stopper. It includes Cucm 0.54 104393.67

vertical bearing with Teflon for slider arrangement in Guided end

2 Supply, fabrication, and installation of MS Wedge Plates including KG 276.70 87715.18

cutting, welding, drilling, grinding and surface treatment as per

approved drawings and specifications.and Fixing of MS Wedge

Plate over Elastomeric Bearing for U-Girder.

3 Supplying to site lifting, installation, fixing and placing of POT - -

Cum PTFE Bearing and its components in position during

casting of Pier/Pedestal and superstructure, incl. grouting of

holes for anchor bolts and underside of base plate with

approved non-shrink cementitious grout (e.g. Conbextra GP2 or

equivalent) as per specification. The design of POT cum PTFE

bearings shall be done by contractor as per loads, movements

etc. given in good for construction (GFC) drawings.

GMRC Page 54 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

i) Free POT Bearing (Un-facored Design Vertical load = 1750 kN ) Nos 48,625.41 4.00

ii) Fixed POT Bearing (Un-facored DesignVertical load = 1750 Nos 40,275.43 4.00

kN and Un-facored Design Horizontal load =600 kN)

iii) Longitudinal Guide POT Bearing (Un-facored Design Nos 42,362.88 4.00

Vertical load = 1750 kN and Un-facored Design Horizontal load

iv) Transverse Guide POT Bearing (Un-facored Design Vertical Nos 41,316.23 4.00

load = 1750 kN and Un-facored Design Horizontal load =600

Note: Price holds good for forces and movements varying by ± 25% -

for those indicated.

4 Spherical bearings Nos. 1,05,360.2 4.00

(i) Providing, fitting and fixing in position true in line and level

Spherical bearings , complete in all respect with all components

incl grouting with non-shrink cementitious grout as per drawing

and technical specifications.

Total Number of Fixed Bearing Max Vertical load = 5600 kN and

Horizontal load =1670 kN

(ii) Total Number of Free Bearing Max Vertical load = 5600 kN Nos. 87,490.7 4.00

(iii) Total Number of Slide Guide Longitudinal Bearing Max Vertical Nos. 1,04,696.6 4.00

load = 5600 kN and Horizontal load =1670 kN

(iv) Total Number of Slide Guide Transeverse Bearing Max Vertical Nos. 93,614.4 4.00

load = 5600 kN and Horizontal load =1670 kN

SCHEDULE B6 Total Amount

SCHEDULE B6 Total Amount

GMRC Page 55 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Schedule B7- MISCELLANEOUS ITEMS

Item Description Unit Rate (excl. Quantity Amount (Rs.)

1 Drainage Work

(i) Providing & fixing of double wall HDPE corrugated/plain pipes and /or

UPVC pipes (only external if provided) as specified for rain water in

superstructure of all types and down take pipes, bends, couplers, upper

receiving cap, Tees and end cap etc. upto bottom of pier through

shear key as specified in drawings. This will be required to be also

provided at track crossing location for laying power cable.

(d) Upper receiving cap -( hot dipped galvanised @650 g/sqm steel) for nos 3,083.66 462.78

2 Expansion Joints - -

GMRC Page 56 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

(i) Omega seal joint / Compression seal Expansion Joint RM 4,677.75 3,753.62

Providing and installing Omega seal joint / Compression seal

Expansion Joint conforming to specification incl. provision of edge

beams at end edges of both adjoining precast diaphragm segments,

cast in situ units and all related operations as required to complete the

work as specified in specifications.

(ii) Strip Seal Joint – Providing and installing Single strip seal joint RM 9,045.00 132.06

conforming to latest revisions of MORTH circulars incl. provision of

edge beams at end edges of precast diaphragm segments and cast in

situ unit and all related operations as required to complete the work as

specified in specifications. Gap for expansion joint installation is upto

100mm & maximum variation in gap upto ± 50mm as per instruction of

engineer incharge.

3 Supply and fixing of 3mt x 0.855mm and 2.0mm thick FRP sheets to RM 2,133.86 1,584.70

cover the gap between the U-girders as per approved drawings and

direction of Engineer-in-charge. This rate includes Material, Labour and

required machinery.

4 Making of Cutouts (Core Cutting) in pre constructed RCC / CC for all

grades / Block / Brick works for services required.

4.1 50 mm dia upto 250rnm long Nos 3,645.00 25.00

4.2 100 mm dia upto 250rnm long Nos 4,253.00 25.00

4.3 250 mm dia upto 250rnm long Nos 4,678.00 25.00

GMRC Page 57 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

4.4 150 mm dia upto 250rnm long Nos 5,164.00 25.00

4.5 200 mm dia upto 250rnm long Nos 5,468.00 25.00

5 Rebaring as per below per below details

5.1 10mm dia. Rebar Fixing in 12mm dia. with hole depth of 6" Nos 224.26 150.00

5.2 12mm dia. Rebar Fixing in 14mm dia. with hole depth of 6" Nos 579.00 150.00

5.3 16mm dia. Rebar Fixing in 20mm dia. with hole depth of 6" Nos 914.37 150.00

5.4 20mm dia. Rebar Fixing in 25mm dia. with hole depth of 6" Nos 1,058.75 150.00

5.5 25mm dia. Rebar Fixing in 30mm dia. with hole depth of 6" Nos 1,469.00 150.00

5.6 32mm dia. Rebar Fixing in 38mm dia. with hole depth of 6" Nos 1,653.00 150.00

6 Providing and fixing of cable support GI bracket (Hot Dip Galvanized as Kg 121.50 1,000.00

per drawing for laying of system cables in the platform area at

elevated station. The rate shall include cost of all required materials,

Hot Dip Galvanized , fabrication, transportation at site, fasteners and

fixing in viaduct holes already provided by Civil contractor for cable

fixing/tieing, complete job in terms of approved drawings and as per

direction of Engineer-in-charge.(Cost of Fasteners paid Separately)

GMRC Page 58 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

7 Providing, fabricating, supplying, and fixing lifting hook arrangement in Nos 3,378.66 7.00

ASS (Auxiliary Sub-Station) / TSS (Traction Sub-Station) room for

lifting and maintenance of equipment such as transformers, panels, or

other heavy electrical equipment, including hook, anchoring system,

fixing arrangement, and all associated works, complete as per

approved drawings and instructions of the Engineer.

8 Providing and applying two-component polysulphide sealant in RM 569.00 500.00

construction/expansion joints of concrete, masonry, metal, glass or

other surfaces, including joint preparation, primer application, backing

rod where required, sealant application and finishing, complete in all

respects as per approved drawings, manufacturer’s specifications and

instructions of the Engineer.

9 Providing, casting, supplying, transporting and erecting precast Sqmt 2,235.60 1,000.00

reinforced cement concrete (RCC) boundary wall panels with RCC

posts, including excavation, foundation, erection, fixing of panels,

jointing, finishing and all associated works, complete in all respects as

per approved drawings and instructions of the Engineer.

GMRC Page 59 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

10 Providing, Installing and fixing in position holding down bolts of various MT 1,52,741.00 7.00

sizes and lengths, as per drawings and instructions, including making of

pockets in foundations, column heads, beams et. / Providing,

fabricating to required profile and shape, transporting, erecting and

fixing in position MS members made of built-up sections/ rolled or

hollow structural steel sections to be used as fixtures/supports/hangers

etc. for system/roofing contractors at any location or as directed by

Engineer in charge. Providing, fabricating, installing and fixing in

position any additional structural connections for signages, gutters, or

required by the system contractors using standard plate sections

welded & built up section, tubes, square, rectangular pipe section,

rolled sections such as angles, channels etc.

11.0 Masonry Work

11.1 Providing & laying Autoclaved Aerated Cement Blocks masonry with Cum 6781 5068

100mm/150mm/200mm/300mm thick AAC blocks in all levels with

RCC band at sill level and lintel level with approved block laying

polymer modified adhesive mortar all complete as per direction of

Engineer-in-Charge. (The payment of RCC band and reinforcement shall

be made for seperately).

11.2 Providing and laying Damp-proof course 40 mm thick with cement Sqm 366 171.5

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate

12.5 mm nominal size).

GMRC Page 60 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

11.3 Reinforced cement concrete work in beams, suspended floors, roofs Cum 10238 491.75

having slope up to 15° landings, balconies, shelves, chajjas, lintels,

bands, plain window sills, staircases and spiral stair cases up to floor

five level excluding the cost of centering, shuttering, finishing and

reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size).

11.4 Centering and shuttering including strutting, propping etc. and -

removal of form for all heights :

11.4.1 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 656 5106.5

11.5 Brick work with common burnt clay F.P.S. (non modular) bricks of class -

designation 7.5 in foundation and plinth in:

11.5.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 6347 71.75

11.6 Brick work with common burnt clay F.P.S. (non modular) bricks of class -

designation 7.5 in superstructure above plinth level up to floor V level

in all shapes and sizes in :

11.6.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 8103 73.5

11.7 Half brick masonry with F.P.S. brick of class designation 75 in -

foundations and plinth in.

11.7.1 Cement mortar 1:3 (1 cement : 3 coarse sand) sqm 830 71.75

GMRC Page 61 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

11.8 Half brick masonry with F.P.S. bricks of class designation 75 in -

superstructure above plinth level up to floor V level.

11.8.1 Cement mortar 1:3 (1 cement :3 coarse sand) sqm 1024 71.75

11.9 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at sqm 94 143.5

every third course of half brick masonry

11.10 Providing and laying in position cement concrete of specified grade -

excluding the cost of centering and shuttering - All work up to plinth

11.10.1 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: cum 7011 71.75

4 graded stone aggregate 20 mm nominal size derived from natural

11.11 Providing and laying in position ready mixed or site batched design -

mix cement concrete for plain cement concrete work; using coarse

aggregate and fine aggregate derived from natural sources, Portland

Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting

of concrete, to improve durability and workability without impairing

strength; including pumping of concrete to site of laying, curing,

carriage for all leads; but excluding the cost of centering, shuttering

and finishing as per direction of the engineer-in-charge; for the

following grades of concrete.

GMRC Page 62 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Note: Extra cement up to 10% of the minimum specified cement -

content in design mix shall be payable separately. In case the cement

content in design mix is more than 110% of the minimum specified

cement content, the contractor shall have discretion to either re-design

the mix or bear the cost of extra cement.

11.11.1 All works above plinth and upto floor V level -

a) Concrete of M10 grade with minimum cement content of 220 kg /cum cum 8179 36.75

b) Concrete of M15 grade with minimum cement content of 240 kg /cum cum 8313 36.75

11.12 Providing and fixing up to floor five level precast cement concrete -

block, including hoisting and setting in position with cement mortar

1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering

11.12.1 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural cum 15919 357

sources : 3 graded stone aggregate 20 mm nominal size derived from

natural sources).

12 Plaster works -

12.1 12mm cement plaster of mix: -

12.1.1 1:6 (1 cement : 6 fine sand). (at all levels and locations) Sqm 297 47402.25

12.2 15 mm cement plaster on rough side of single or half brick work wall of -

GMRC Page 63 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

12.2.1 1:4 (1 cement : 4 fine sand) (at all levels and locations) Sqm 356 18735.5

12.3 6 mm cement plaster of mix : -

12.3.1 1:3 (1 cement: 3 fine sand) (at all levels and locations) Sqm 268 40398.75

13 Providing & fixing G.I. Hexagonal chicken wire mesh of size 12mm x 20 Sqm 31.50 24,948.00

gauge conforming to IS : 3150 at the junction of dissimilar surfaces of

brick / block masonry wall and RCC column / beams and the like

including necessary "U" nails / screws with cleats for fixing, overlapping

etc. complete all as per specification and as directed by the Engineer

for all height and all locations.

Schedule B7 - Total Amount

Schedule B7 - Total Amount

GMRC Page 64 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Schedule B8 - Structural Steel for Open Web Girder

Item Description Unit Rate (excl. Quantity Amount

1 Supply and Fabrication of steel through type TRUSS spans as per the approved MT

drawings of superstructure with contractor's own structural steel plates 1,81,543.22 1,489.40

(conforming to IS-2062-Grade B0 E 410) & structural steel rolled section

(conforming to IS-2062-Grade B0 E 250) quality with all welds, rivets, nuts bolts,

etc. with contractor's own materials, fabrication, machinery, templates, fixtures,

equipment, tools and plants, transportation, skilled/unskilled labour, all leads and

lifts, Descent, loading, unloading, crossing one or more Railway track if required,

etc. complete and as per RDSO drawings & specifications by RDSO approved

venders only.The work shall be carried out during block periods sanction by

railway. No extra payment shall be made on this account.

The rate is inclusive of transportation of fabricated truss parts to site by

contractor's own means at his cost.

The structural steel to be used shall be procured from the Railway/RDSO approved

manufacturer only. Work has to be done as per drawings and specifications

approved by Railway.

1) The fabrication of truss must be got done from RDSO approved firms only.

2) For payment purpose, nominal weight of the truss as per drawing will only be

Metalising TRUSS components such as cross girders, top chord channels, bracing

etc. as directed by Engineer with aluminium spray not less than two layers after

preparing surface by sand/grit blasting as per provision laid in Appendix VI of IRS B

1 code (latest alteration) including one coat wash primer (IS-5666) one coat zinc

chrome primer (IS-104) and two coats of aluminium paint (IS-2339) with approved

paint conforming to IS specification for fabrication and erection of steel girder

bridge (IRS B 1) with Contractor's own materials, tools and plants, labour, loading,

unloading, transportation, handling, re-handling if any, including all lead, lifts,

Descents, crossing of track/obstruction etc. complete in all respect and as per

direction of the Engineer.

GMRC Page 65 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Assembling, Welding, Erecting, Riveting, Launching, bolting by HSFG bolts(class

grade and above) wherever required (as per approved drawings) with contractor's

rivet materials, weld materials, HSFG bolts, service bolts, erection and launching of

Truss span to Railway's approved drawings with other ancillary steel structures

fixed to the truss where necessary in proper level and alignment and as per

technical specifications. The cost includes cost of launching steel nose/ launching

steel girder of required length.

Schedule B8 - Total Amount

Schedule B8 - Total Amount

GMRC Page 66 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Schedule C1 - Electrical System Works

S.No Description of Item Unit Rate QUANTITY Amount

SWITCH BOARDS/PANELS

Design, Fabrication, Assembling, Wiring, Supply, installation, testing & commissioning

of LT Panels fabricated out of CRCA sheet steel 2 mm thick for structural members

and 1.6 mm thick for doors and covers in cubical compartmentalized free standing

floor mounted, dust and vermin proof with reinforcement of suitable size ISA / ISMC

/ ISMB / flats wherever necessary. Panels shall be treated with all anticorrosive

process and powder coated (Minimum thickness 80 micron) with approved shade.

Panels shall be suitable for 415V, 3 phase, 4 wire, 50 Hz power supply system to

withstand rated symmetrical fault level at 415 V including interconnections, bonding

to earth etc. Panels shall be provided with 25% spare space, space heaters,

compartmental lights, lifting hooks as required and 2 Nos of Earthing Terminals. All

inter wiring shall be with suitable stranded copper conductor FRLSH insulated wire.

The panels shall confirm to IP-54. Galvanized hardwares with Zinc passivation shall be

a The Electrical Panels shall be a minimum of Form 4b type Type 5 in accordance

with BS EN61439-1/IEC 61439-2 . Internal arc test as per IEC 61641 complete as per

b The panels shall be provided with detachable gland plates of 3mm thickness for

entry of cables from the top/bottom as required.

c All live accessible parts shall be shrouded and all equipment shall be finger touch

proof. SMC/DMC shrouds and busbars supports shall be suitably spaced.

d The panel shall have tinned copper busbars with bar type feeder connections,

spacers etc.and neutral busbar shall be of 100% capacity. Bus Bar Sizing calculations

shall be submitted for approval of GMRCL Engineer.

e All components shall be connected to a common internal copper earth bus bar of

minimum size 50mm x 6mm.

GMRC Page 67 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

g Hinged doors with Neoprene type gaskets & Triangle key lock facility shall be

provided on Doors and all outgoing feeders with switch handles lockable in OFF

h Each incomer and outgoing feeder shall be provided with suitably rated MCB

controlled multiple LED lamps (Red, Yellow, Blue) for Phase indication and (Red,

Green, Amber) for ON, OFF & Trip status with all required accessories suitable for

230 VAC operation as approved.

j The makes of components and accessories shall be unique for all the panels under

this contract in order to have uniformity and standardization.

k All MCCBs shall be current limiting type microprocessor based releases having

continuously adjustable current setting in the range of 0.4 to 1.0 and 2-10 times of

short circuit, rated for requisite specified Service short circuit breaking capacity (Ics)

suitable for isolation conforming to latest IS/IEC60947-2 duly marked on MCCB, at

operating voltage (Ue) of 415 V, insulation voltage (Ui) 1100 V and with trip free

mechanism, handle indicating ON/OFF/tripped position. The breaking capacity as

mentioned in items of BOQ below. Breakers must have Ics = Icu = Icw.

l All MCCB's shall be 4 pole with Over Load Protection,Short circuit and Earth Fault

sensing. MCCBs shall be suitably designed to provide protection of motors, cables,

busbars to suit rated current, unbalanced power distribution as required and with

front adjustable overload and short circuit releases and minimum electrical

endurance shall be of the order of suitable operation cycles as specified in the

Technical Specification.All MCCBs shall be provided with Rotary handle and spreader

links for termination. All 4P MCCB has inbuilt feature of earth fault protection,

whereas all TPN MCCB's (Expect Motor Starters & DRPC Panels) shall have external

CT for neutral overload protection and earth fault protection

m All the Incomer, bus couplers of switch boards/ panels shall be provided with

potential free contacts for connectivity to PLC for ON/OFF status and control, as

required for BMS .All Incomer, bus couplers of switch boards/ panels shall be

provided with Multi function Meters with RS 485 for BMS connectivity. All the RS -

485 devices of Panels/ DBs shall be looped into a single terminal/ port for each

panels for easy integrations with BMS. All internal Wiring & required accessories are

in scope of Panel/ DB Vendor.

GMRC Page 68 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

n MCBs shall conform to IEC898/IS 8828 (latest) and, with breaking capacity 10 kA at

415 V AC, current limiting type lower power loss appx 40 - 70% of the stipulated

value and suitable for magnetic releases operating between 3 to 5 times rated

current for normal power distribution application and 5 to 10 times rated current for

motor application duty, with minimum Electrical endurance of the order of

operation cycles. All MCCBs shall be provided with Rotary handle and spreader links

for termination complete as required.

o Panel design shall be compact to economies the room space available.

p All incomer ACB's shall be provided with minimum 6 NO + 6 NC contacts and there

should be provision to add min. 6 NO+ 6 NC Auxiliary contacts.

q All 4-pole ACBs, MCCBs & MCBs shall have fully rated neutral pole.

r The panels shall be provided with polymer based fire trace tube system. Scheme of

fire trace tube system shall be got approved by GMRCL Engineer before proceeding

with manufacturing and assembly. Cost for this item shall be paid under suitable Item

of Fire fighting works. Contractor shall interface with OEM of panel and Panel

flooding system and ensure that the provision is made during fabrication of panel

s Internal control wiring in the Starters shall be done with FRLSH PVC insulated cables

of adequate size. Internal wiring, contactors, relay contacts, push button contacts

should be rated not less than 2.5 sq. mm. All MCCB shall be motorized with RS

type communication port for BMS/SCADA functioning.

u Switch boards / panels shall be provided with Automatic clean agent gas flooding

arrangement with a fire detection tube system, as per the specifications complying

with the latest Indian Standards (IS:15517) and NFPA-2001. An Automatic gas

flooding system shall be provided with manual overriding system with regulated

valve arrangement including control & Monitoring module for opening or closing the

cylinder as and when it is called for. A bank of clean agent gas cylinders with

necessary tubing shall be provided.

v Each Panel/DB as required shall be capable of real-time data of Status, Control &

Monitoring through Ethernet/TCP IP Port / RS 485 through open protocol (IEC 60870-

5104 shall be preferred),

GMRC Page 69 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

w The Digital Multifunction meter shall have inbuilt bar graph for showing the

percentage loading in each phase and inbuilt LCD display to show all the power

parameters like A, V, W, VAR, VA, Wh, Vah, VARh & Hz. with BMS connectivity.

x All motorized MCCBs /ASTS MCCBs to be provided with 230V, 50Hz control supply as

required including conversion needed if any from UPS DB.

y The schematic drawings are to be read in conjunction with BOQ & Technical

specifications.

z The load demand, cable size and route length are indicative only and contractor shall

evaluate the adequacy of the switch gear and voltage drop norms.

aa All switch boards/ panels shall be provided with necessary Surge Protection for

Transient Over Voltages due to Lightning and switching surges shall be incorporated

with suitable rating Surge Arresters under Class-1, Class-2, Class-3 of IEC

ab The bus bar shall be designed for all the switch boards / panels meeting application

duty requirement provided with insulations/ bus bar supports system withstanding

the thermo dynamic stresses

ac All panel shall have IP 54 protection for indoor application and IP 65 for outdoor

ad Class-B SPDs shall be provided in all panels and Distribution Boards to meet all

functional requirement as per IEC 61643-12 or latest.

1.1 MAIN DISTRIBUTION BOARD (MDB)

A Transformer - I Incoming

GMRC Page 70 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

1 No. of 1000 A, 415V, 50kA, 4P Electrically operated (fully motorized) fully draw out

(EODO) type ACB with built in Microprocessor based release unit for Over Current,

Short circuit and earth fault protection with adjustable setting and time log facility

for each of the fault for achieving discrimination along with distinct fault indication

through LED display. ACB shall be provided with continuous rated shunt trip release

suitable for 240 VAC operation, suitable handles to operate ACB manually and spring

charging device suitable for 1 phase, 240 VAC operation, NO/NC contacts for

interlocks and indications. ACB shall have in-built compatibility through open

protocol like Modbus for SCADA/BMS connectivity (RS485) along with following

i) 1 No. of Multi Function Meter of accuracy class 1 with all required to measure and

display the Electrical quantities like, Current, Voltage, Active Energy-KWH, Reactive

Energy-kVAH, frequency, Maximum Demand-KVA/KW, Total Hormonic Distortion &

power factor etc. with facility conforming to specifications and latest IEC standards

with necessary Circuit MCBs and suitable size summating CTs for metering

supporting SCADA/BMS connectivity

ii) 1 No. 0-1000A Digital Ammeter with selector switch and Required set of CTs, MCBs

and Accessories

iii) 1 No. 0-500V Digital Voltmeter with selector switch and Required set of MCBs and

iv) 1 set of MCB controlled Breaker ON/OFF/TRIP indicating lamps.

v) 1 set of MCB controlled phase indicating lamps for all three phases.

vi) 3 Nos. of cast resin current transformers of 1000/5 ratio with 15 VA Burden & Class

5P10 for protection

vii) 3 Nos. of cast resin current transformers of 1000/5 ratio with 15VA burden and Class

1 for measurement

viii) 3 nos. cast resin current transformers of 1000/5 ratio with 15VA burden and Class

ix) 1 set of Under Voltage Relay with complete accessories.

x) 1 set of Over Voltage Relay with complete accessories.

xi) 1 set of Instantaneous Over Currrent Relay (50)

GMRC Page 71 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

xii) 1 set of IDMT Over Current Relay (51)

xiii) 1 set of Earth Fault protection relay (51N)

xiv) 1 set of Ground fault protection relay (50N)

xv) 1 set of reverse power protection and phase sequence protection

xvi) Auxiliary contacts required for necessary interlocking of Transformers, HT & LT

xvii) Class-B SPDs shall be provided in panel as per IEC 61643-12 or latest.

xviii) Contractor shall provide earmarked potential free terminals for SCADA signals as per

specification & requirements.

B Transformer - II Incoming

1 No. of 1000 A, 415V, 50kA, 4P Electrically operated (fully motorized) fully draw out

(EODO) type ACB with built in Microprocessor based release unit for Over Current,

Short circuit and earth fault protection with adjustable setting and time log facility

for each of the fault for achieving discrimination along with distinct fault indication

through LED display. ACB shall be provided with continuous rated shunt trip release

suitable for 240 VAC operation, suitable handles to operate ACB manually and spring

charging device suitable for 1 phase, 240 VAC operation, NO/NC contacts for

interlocks and indications. ACB shall have in-built compatibility through open

protocol like Modbus for SCADA/BMS connectivity (RS485) along with following

i) 1 No. of Multi Function Meter of accuracy class 1 with all required to measure and

display the Electrical quantities like, Current, Voltage, Active Energy-KWH, Reactive

Energy-kVAH, frequency, Maximum Demand-KVA/KW, Total Hormonic Distortion &

power factor etc. with facility conforming to specifications and latest IEC standards

with necessary Circuit MCBs and suitable size summating CTs for metering

supporting SCADA/BMS connectivity

ii) 1 No. 0-1000A Digital Ammeter with selector switch and Required set of CTs, MCBs

and Accessories

iii) 1 No. 0-500V Digital Voltmeter with selector switch and Required set of MCBs and

iv) 1 set of MCB controlled Breaker ON/OFF/TRIP indicating lamps.

GMRC Page 72 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

v) 1 set of MCB controlled phase indicating lamps for all three phases.

vi) 3 Nos. of cast resin current transformers of 1000/5 ratio with 15 VA Burden & Class

P10 for protection

vii) 3 Nos. of cast resin current transformers of 1000/5 ratio with 15VA burden and Class

1 for measurement

viii) 3 nos. cast resin current transformers of 1000/5 ratio with 15VA burden and Class

for APFC relay /AHF.

ix) 1 set of Under Voltage Relay with complete accessories.

x) 1 set of Over Voltage Relay with complete accessories.

xi) 1 set of Instantaneous Over Currrent Relay (50)

xii) 1 set of IDMT Over Current Relay (51)

xiii) 1 set of Earth Fault protection relay (51N)

xiv) 1 set of Ground fault protection relay (50N)

xv) 1 set of reverse power protection and phase sequence protection

xvi) Auxiliary contacts required for necessary interlocking of Transformers, HT & LT

xvii) Class-B SPDs shall be provided in panel as per IEC 61643-12 or latest.

xviii) Contractor shall provide earmarked potential free terminals for SCADA signals as per

specification & requirements.

1 No. of 1000 A, 415V, 50kA, 4P draw out Electrically operated (fully motorized) fully

draw out (EODO) type ACB with built in Microprocessor based release unit for Over

Current, Short circuit and earth fault protection with adjustable setting and time log

facility for each of the fault for achieving discrimination along with distinct fault

indication through LED display. ACB shall be provided with continuous rated shunt

trip release suitable for 240 VAC operation, suitable handles to operate ACB

manually and spring charging device suitable for 1 phase, 240 VAC operation, NO/NC

contacts for interlocks and indications. ACB shall have in-built compatibility through

open protocol like Modbus for SCADA/BMS connectivity (RS485) along with following

GMRC Page 73 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

i) 1 set of MCB controlled Breaker ON/OFF/TRIP indicating lamps and ON/OFF push

ii) Auxiliary contacts required for necessary interlocking of Transformers, HT&LT

iii) Contractor shall provide an earmarked potential free terminals for SCADA signals as

per specification & requirements.

iv) Two incomers shall be interlocked electrically & mechanically, so as only any 02 out

of 03 ACBs can be closed at any time.

Electrolytic high conductivity tinned copper three phase and neutral busbars rated at

>1000 A as per specification, suitable to withstand symmetrical fault level of 50 kA at

415 V with 100% rated neutral busbar.

a) 1 nos. 400A, 415V, Ics=35 kA, Four pole MCCB with variable overcurrent, short circuit

and earth fault releases & each having 1- set Red/Green ON/OFF indicating lamps, &

3 nos. cast resin current transformers of 400/5 ratio with 15 VA Burden & Class

for Ammeter with Ammeter selector Switch.

b) 3 nos. 250A, 415V, Ics=35 kA, Four pole MCCB with variable overcurrent, short circuit

and earth fault releases & each having 1- set Red/Green ON/OFF indicating lamps, &

3 nos. cast resin current transformers of 250/5 ratio with 15 VA Burden & Class

for Ammeter with Ammeter selector Switch .

c) 3 nos. 160A, 415V, Ics=35 kA, Four pole MCCB with variable overcurrent, short

circuit, and earth fault releases & each having 1- set Red/Green ON/OFF indicating

lamps, 3 nos. cast resin current transformers of 160/5 ratio with 15 VA Burden &

Class 1.0 for Ammeter with Ammeter selector Switch.

d) 1 nos. 100A, 415V, Ics=35 kA, Four Pole MCCB with variable overcurrent, short

circuit and earth fault releases & each having 1- set Red/Green ON/OFF indicating

lamps & 3 nos. cast resin current transformers of 100/5 ratio with 15 VA Burden &

Class 1.0 for Ammeter with Ammeter selector Switch

GMRC Page 74 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

a) 2 nos. 400A, 415V, Ics=35 kA, Four pole MCCB with variable overcurrent, short circuit

and earth fault releases & each having 1- set Red/Green ON/OFF indicating lamps &

nos. cast resin current transformers of 400/5 ratio with 15 VA Burden & Class 1.0 for

Ammeter with Ammeter selector Switch.

b) 3 nos. 160A, 415V, Ics=35 kA, Four pole MCCB with variable overcurrent, short circuit

and earth fault releases & each having 1- set Red/Green ON/OFF indicating lamps &

nos. cast resin current transformers of 160/5 ratio with 15 VA Burden & Class 1.0 for

Ammeter with Ammeter selector Switch.

c) 3 nos. 250A, 415V, Ics=35kA, Four pole MCCB with variable overcurrent, short circuit

and earth fault releases & each having 1- set Red/Green ON/OFF indicating lamps &

nos. cast resin current transformers of 250/5 ratio with 15 VA Burden & Class 1.0 for

Ammeter with Ammeter selector Switch.

d) 2 nos. 100A, 415V, Ics=35 kA, Four pole MCCB with variable overcurrent, short circuit

and earth fault releases & each having 1- set Red/Green ON/OFF indicating lamps &

nos. cast resin current transformers of 100/5 ratio with 15 VA Burden & Class 1.0 for

Ammeter with Ammeter selector Switch.

SITC of MAIN DISTRIBUTION BOARD (MDB) No.

1.2 Emergency Main Distribution Board (EMDB)

A Incomer (Normal supply)

a) Incoming from B1 with 400A, 415V , Ics = 35kA, FP, Motorised MCCB complete with

variable overcurrent ans short circuit releases for Normal supply.

b) Incoming from B2 with 400A, 415V , Ics = 35kA, FP, Motorised MCCB complete with

variable overcurrent ans short circuit releases for Normal supply.

c) Automatic changeover system complete

GMRC Page 75 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

B INCOMING FROM DG PANEL

a) 1 no. 400A, 415V , Ics = 35kA, FP, Motorised MCCB complete with variable

overcurrent ans short circuit and short circuit releases for Normal supply.

b) Automatic changeover system complete

Electrolytic high conductivity tinned copper three phase and neutral busbars rated at

> 400 A as per specification, suitable to withstand symmetrical fault level of 35 kA at

415 V with 100% rated neutral busbar.

a) All incomers shall be interlocked electrically & mechanically with contactor based

automatic changeover system so that only one supply is switched on at a time and

fail safe restoration.

D Outgoing Units

a) 4 nos. 125 A, 415V, Ics=35 kA, TPN MCCB with fixed neutral and variable

overcurrent, short circuit and earth fault releases with 1 set each of MCB controlled

Breaker ON/OFF/TRIP and phase indicating lamps.

b) 2 no. 200 A, 415V, Ics=35 kA, TPN MCCB with fixed neutral and and variable

overcurrent, short circuit and earth fault releases with 1 set each of MCB controlled

Breaker ON/OFF/TRIP and phase indicating lamps.

c) 12 no. 63 A, 415V, Ics=25 kA, TPN MCCB with fixed neutral and and variable

overcurrent, short circuit and earth fault releases with 1 set each of MCB controlled

Breaker ON/OFF/TRIP and phase indicating lamps.

GMRC Page 76 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

1 No, 230V, AC operated integral type Digital meter with RS485 port for measuring

Amps ,Voltage, Energy, kWH, kVAR, frequency, Maximum Demand & power factor

etc conforming to specifications, latest IEC/ EMC and EMI standards/criterion, with

necessary Circuit MCBs and suitable size summating CTs for above incomers

metering supporting SCADA/BMS connectivity.To be equipped with source power

sensing, automatic changeover, 3-phase Under-voltage protection, Phase Sequence

Protection and test facility inbuilt in the controller and RS 485 communication port

with compatibility for interfacing with BMS/SCADA. The trip unit of MCCB shall be

with adjustable Overload protection, Short Circuit protection, shunt trip coil, auxiliary

contacts for ON, OFF, TRIP indication etc. as per drawing and specifications along

with 3 sets of following accessories.

i) 1 No. of Multi Function Meter of accuracy class-1 with all required to measure and

display the Electrical quantities like, Current, Voltage, Active Energy-KWH, Reactive

Energy-kVAH, frequency, Maximum Demand-KVA/KW, Total Hormonic Distortion &

power factor etc. with facility conforming to specifications and latest IEC standards.

ii) 1 No. 0-400A Digital Ammeter with selector switch and Required set of CTs, MCBs

and Accessories

iii) 1 No. 0-500V Digital Voltmeter with selector switch and Required set of MCBs and

iv) 1 set of MCB controlled Breaker ON/OFF/TRIP indicating lamps.

v) 1 set of MCB controlled phase indicating lamps for all three phases.

vi) Auxiliary contacts required for necessary interlocking of breakers.

vii) 3 Nos. of cast resin current transformers of 400/5 ratio with 15VA burden and Class

1 for measurement.

viii) Class-B, SPDs shall be provided in panel as per IEC 61643-12 or latest.

ix) Contractor shall provide an earmarked potential free terminals for SCADA signals as

per specification & requirements.

SITC of Emergency Main Distribution Board (EMDB) No.

GMRC Page 77 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

1.3 Design, Supply, installation, testing commissioning of Main Lighting & Power panel

(MLPP) complete as per specifications & Drawing with following:

Main Lighting & Power panel (MLPP)

A Incomer (from MDB-1)

2 No. of 100 A, 415V, 25kA, 4P MCCB with changeover switch built in

Microprocessor based release unit for Over Current, Short circuit and earth fault

protection with adjustable settings. The breaking capacity of MCCB shall be Icw=Icu.

MCCB shall have in built compatibility through open protocol like Modbus for

SCADA/BMS connectivity (RS485) along with following accessories.

i) 1 No. of Multi Function Meter of accuracy class-1 with all required to measure and

display the Electrical quantities like, Current, Voltage, Active Energy-KWH, Reactive

Energy-kVAH, frequency, Maximum Demand-KVA/KW, Total Hormonic Distortion &

power factor etc. with facility conforming to specifications and latest IEC standards.

MFM shall have in built compatibility through open protocol like Modbus for

SCADA/BMS connectivity (RS485) and all required accessories.

ii) 1 set of MCB controlled Breaker ON/OFF/TRIP indicating lamps.

iii) 1 set of MCB controlled phase indicating lamps for all three phases.

iv) Amber healthy trip indicating lamps

v) 3 Nos. of cast resin current transformers of 100/5 ratio with 15VA burden and Class

1.0 for measurement

vi) Auxiliary contacts required for necessary interlocking.

vii) Class-B SPDs shall be provided in all panels and Distribution Boards to meet all

functional requirement as per IEC 61643-12 or latest.

viii) Contractor shall provide an earmarked potential free terminals for SCADA signals as

per specification & requirements.

GMRC Page 78 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

Electrolytic high conductivity tinned copper three phase and neutral busbars rated at

>100 A as per specification, suitable to withstand symmetrical fault level of 25 kA at

415 V with 100% rated neutral busbar.

a) 9 Nos. of 10A/20A , 415V, 10kA, TPN MCB, with fixed neutral and variable

overcurrent, short circuit releases. Suitably rated AC3 Duty power contactor of with

necessary NO & NC auxiliary contacts as required for operation through BMS, Auto/

manual selector switch, 1 set of MCB controlled Breaker ON/OFF/TRIP indicating

lamps, complete as required and approved.

SITC of Main Lighting & Power panel (MLPP) No.

1.4 Design, Supply, installation, testing commissioning of Emergency (UPS) Power

panel complete as per specifications & Drawing with following:

Emergency (UPS) Power panel (UPP)

a) 2 Nos. of 63 A, 415V, 25kA, 4P MCCB with built in Microprocessor based release unit

for Over Current, Short circuit and earth fault protection with adjustable settings.

The breaking capacity of MCCB shall be Icw=Icu. MCCB shall have in built

compatibility through open protocol like Modbus for SCADA/BMS connectivity

(RS485) each along with following accessories.

i) 1 No. of Multi Function Meter of accuracy class-1 with all required to measure and

display the Electrical quantities like, Current, Voltage, Active Energy-KWH, Reactive

Energy-kVAH, frequency, Maximum Demand-KVA/KW, Total Hormonic Distortion &

power factor etc. with facility conforming to specifications and latest IEC standards.

MFM shall have in built compatibility through open protocol like Modbus for

SCADA/BMS connectivity (RS485) and all required accessories.

ii) 3 Nos. of cast resin current transformers of 40/5 ratio with 15VA burden and Class

1.0 for measurement

iii) Auxiliary contacts required for necessary interlocking.

GMRC Page 79 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

iv) Class-B SPDs shall be provided in all panels and Distribution Boards to meet all

functional requirement as per IEC 61643-12 or latest.

v) 1 set of MCB controlled Breaker ON/OFF/TRIP indicating lamps.

vi) 1 set of MCB controlled phase indicating lamps for all three phases.

vii) Contractor shall provide an earmarked potential free terminals for SCADA signals as

per specification & requirements.

Electrolytic high conductivity tinned copper three phase and neutral busbars rated at

>63 A as per specification, suitable to withstand symmetrical fault level of 25 kA at

415 V with 100% rated neutral busbar.

a) 11 Nos. of 20A, 230V, 10kA, DP MCB, with fixed neutral and variable overcurrent &

short circuit releases. Suitably rated AC3 Duty power contactor of with necessary NO

& NC auxiliary contacts as required for operation through BMS, Auto / manual

selector switch, 1 set of MCB controlled Breaker ON/OFF/TRIP indicating lamps,

complete as required and approved.

b) 4 Nos. of 10A, 230V, 10kA, DP MCB, with fixed neutral and variable overcurrent &

short circuit releases. Suitably rated AC3 Duty power contactor of with necessary NO

& NC auxiliary contacts as required for operation through BMS, Auto / manual

selector switch, 1 set of MCB controlled Breaker ON/OFF/TRIP indicating lamps,

complete as required and approved.

c) 3 Nos. of 20A, 230V, 10kA, DP MCB, with fixed neutral and variable overcurrent &

short circuit releases. Suitably rated AC3 Duty power contactor of with necessary NO

& NC auxiliary contacts as required for operation through BMS, Auto / manual

selector switch, 1 set of MCB controlled Breaker ON/OFF/TRIP indicating lamps,

complete as required and approved.

SITC of Emergency (UPS) Power panel (EPP) No.

GMRC Page 80 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

1.5 Design, Supply, installation, testing commissioning of Fire & Water Pump Panel

(FWP) complete as per specifications, Drawings and as per following details:

1.5.1 Fire & Water Pump Panel (FWP)

a) 2 Nos. 200A, 35 kA, 4 pole, motorized MCCBs with automatic changeover system

with source power sensing with provision for receiving two independent source

power supply (one incoming supply from EMDB and one incoming supply from DG-

AMF panel) , electrically and mechanically interlocked with common base frame and

controller having selector switch for automatic & manual operation on both the

sources., 3 phase Under - voltage protection and Phase Sequence Protection inbuilt

in the controller and RS 485 communication port with compatibility for interfacing

with BMS/SCADA. The trip unit of MCCB shall be with adjustable Overload

protection, Short Circuit protection, shunt trip coil, auxiliary contacts for ON, OFF,

TRIP indication etc. as per drawing and specifications each along with following.

i) 1 No. of Multi Function Meter of accuracy class-1 with all required to measure and

display the Electrical quantities like, Current, Voltage, Active Energy-KWH, Reactive

Energy-kVAH, frequency, Maximum Demand-KVA/KW, Total Hormonic Distortion &

power factor etc. with facility conforming to specifications and latest IEC standards.

ii) 3 Nos. of cast resin current transformers of 200/5 ratio with 15VA burden and Class

1.0 for measurement

iii) 1 set of MCB controlled Breaker ON/OFF/TRIP indicating lamps.

iv) 1 set of MCB controlled phase indicating lamps for all three phases.

v) Auxiliary contacts required for necessary interlocking of breakers.

vi) Class-B SPDs shall be provided in all panels and Distribution Boards to meet all

functional requirement as per IEC 61643-12 or latest.

vii) Contractor shall provide an earmarked potential free terminals for SCADA signals as

per specification & requirements.

GMRC Page 81 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

a) Electrolytic high conductivity tinned copper three phase and neutral busbars rated at

>200A as per specification, suitable with stand symmetrical fault level of 35kA at

V. The neutral busbar is to be of capacity as phases

a) 3 nos. 160 A, Ics=25 kA, 415 V, TPN MCCB with fixed neutral and with variable

overcurrent and short circuit releases.

a1) 3 nos. Star‐Delta starter of Suitable rating comprising 3 Nos. TP contactor AC‐3 duty

Auto/Manual switch, timer, Start Stop push button, & with potential free contacts for

remote monitoring and control having the following item for each.

i) 1 No. of AC operated, 4 Digit, independent Digital Ammeter with selector switch

with necessary Circuit MCBs and with suitable size, 1 Class CTs connections as

required for outcoming feeders

ii) 1 set of start stop push buttons with inbuilt ON/OFF indicating lamps.

iii) Auto / Manual selector switch.

iv) Amber healthy trip indicating lamps.

b) 5 no. 20A, Ics= 10 kA, 415 V, TP N MCB with fixed neutral and with variable

overcurrent and short circuit releases.

b1) 2 KW DOL Starter (2 No Sump pumps), Star‐Delta starters of Suitable rating (2 Nos.

Domestic water pumps), Star‐Delta starters of Suitable rating (1 no jockey pump)

with potential free contacts for remote monitoring and control, having the following

items for each:

i) 1 No. of AC operated, 4 Digit, independent Digital Ammeter with selector switch

with necessary Circuit MCBs and with suitable size, 1 Class CTs connections as

required for outcoming feeders

ii) 1 set of start stop push buttons with inbuilt ON/OFF indicating lamps.

iii) Auto / Manual selector switch.

iv) Amber healthy trip indicating lamps

GMRC Page 82 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

c) 4 no. 20 A, Ics= 25 kA, 415 V, TP N MCB with fixed neutral and with variable

overcurrent and short circuit releases.

c1) 3.5 KW Star-Delta Starter (2 No Borewell pump)with potential free contacts for

remote monitoring and control. having the following item for each

i) 1 No. of AC operated, 4 Digit, independent Digital Ammeter with selector switch

with necessary Circuit MCBs and with suitable size, 1 Class CTs connections as

required for outcoming feeders

ii) 1 set of start stop push buttons with inbuilt ON/OFF indicating lamps.

iii) Auto / Manual selector switch.

iv) Amber healthy trip indicating lamps

D Auxiliary relay shall be provided which shall be activated by pressure switch for

remote monitoring.

SITC of Fire & Water Pump Panel (FWP) No.

1.6 Design, Supply, installation, testing commissioning of Escalator Power Panel (ESPP)

complete as per specifications, Drawing and as per following details:

1.6.1 Escalator Power Panel (ESPP)

a) 2 No. of 250 A, 415V, 35kA, 4P MCCB with changeover switch with E/M interlocking

built in Microprocessor based release unit for Over Current, Short circuit and earth

fault protection with adjustable settings.The breaking capacity of MCCB shall be

Icw=Icu. MCCB shall have in built compatibility through open protocol like Modbus

for SCADA/BMS connectivity (RS485) along with following accessories.

i) 1 No. of Multi Function Meter with all required to measure and display the Electrical

quantities like, Current, Voltage, Active Energy-KWH, Reactive Energy-kVAH,

frequency, Maximum Demand-KVA/KW, Total Hormonic Distortion & power factor

etc. with facility conforming to specifications and latest IEC standards. MFM shall

have in built compatibility through open protocol like Modbus for SCADA/BMS

connectivity (RS485) and all required accessories.

GMRC Page 83 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

vii) 3 Nos. of cast resin current transformers of 250/5 ratio with 15VA burden and Class

1.0 for measurement

ii) Auxiliary contacts required for necessary interlocking.

iii) Class-B SPDs shall be provided in all panels and Distribution Boards to meet all

functional requirement as per IEC 61643-12 or latest.

iv) 1 set of MCB controlled Breaker ON/OFF/TRIP indicating lamps.

v) 1 set of MCB controlled phase indicating lamps for all three phases.

vi) Contractor shall provide an earmarked potential free terminals for SCADA signals as

per specification & requirements.

Electrolytic high conductivity tinned copper three phase and neutral busbars rated at

>250 A as per specification, suitable to withstand symmetrical fault level of 35 kA at

415 V with 100% rated neutral busbar.

a) 8 Nos. of 63A, 415V, 25kA, TPN MCCB, with fixed neutral and variable overcurrent &

short circuit releases. Suitably rated AC3 Duty power contactor of with necessary NO

& NC auxiliary contacts as required for operation through BMS, Auto / manual

selector switch, 1 set of MCB controlled Breaker ON/OFF/TRIP indicating lamps,

complete as required and approved.

SITC of Escalator Power Panel (ESPP) No.

1.7 Design, Supply, installation, testing commissioning of Commercial Power Panel

(CPP) complete as per specification, Drawing and as per following details:

1.7.1 Commercial Power Panel (CPP)

GMRC Page 84 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

2 No. of 160 A, 415V, 25kA, 4P MCCB with changeover switch built in

Microprocessor based release unit for Over Current, Short circuit and earth fault

protection with adjustable settings. The breaking capacity of MCCB shall be Icw=Icu.

MCCB shall have in built compatibility through open protocol like Modbus for

SCADA/BMS connectivity (RS485) along with following accessories.

i) 1 No. of Multi Function Meter of accuracy class-1 with all required to measure and

display the Electrical quantities like, Current, Voltage, Active Energy-KWH, Reactive

Energy-kVAH, frequency, Maximum Demand-KVA/KW, Total Hormonic Distortion &

power factor etc. with facility conforming to specifications and latest IEC standards.

MFM shall have in built compatibility through open protocol like Modbus for

SCADA/BMS connectivity (RS485) and all required accessories.

vii) 3 Nos. of cast resin current transformers of 160/5 ratio with 15VA burden and Class

1.0 for measurement

ii) Auxiliary contacts required for necessary interlocking.

iii) Class-B SPDs shall be provided in all panels and Distribution Boards to meet all

functional requirement as per IEC 61643-12 or latest.

iv) 1 set of MCB controlled Breaker ON/OFF/TRIP indicating lamps.

v) 1 set of MCB controlled phase indicating lamps for all three phases.

vi) Contractor shall provide an earmarked potential free terminals for SCADA signals as

per specification & requirements.

Electrolytic high conductivity tinned copper three phase and neutral busbars rated at

>160 A as per specification, suitable with stand symmetrical fault level of 25kA at

415 V. The neutral busbar is to be of same capacity as phases.

a) 1 no. 125 A Ics=15 kA, 415V, 1 No. KWH meter & TPN MCCB C-Curve each having

indication lamps to give ON/OFF/TRIP status.

b) 2 nos. 63 A Ics=15 kA, 415V, 1 No. KWH meter & TPN MCCB C-Curve each having

indication lamps to give ON/OFF/TRIP status.

GMRC Page 85 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

C) 2 nos.32A Ics=10 kA, 230V, 1 No. KWH meter & DP MCB C-Curve each having

indication lamps to give ON/OFF/TRIP status.

d) 7 nos. 20A Ics=10 kA, 230V, 1 No. KWH meter & DP MCB C-Curve each having

indication lamps to give ON/OFF/TRIP status.

a) 1 No. in each outgoing, Electronic Energy Meter with RS-485 port for measuring

Current, Voltage Active and reactive Energy, Maximum Demand & Power factor etc.

with TOD facility with suitable size of CT's for each of the outgoing feeder with

locking arrangement.

b) 1 no. in each outgoing, KWH digital energy meter with requisite class CT

SITC of Commercial Power Panel (CPP) No.

1.8 Design, Supply, installation, testing commissioning of A/C Power Panel (ACPP)

complete as per specifications, Drawings and as per following details:

1.8.1 A/C Power Panel (ACPP) as per specifications, Drawing and as per following details:

a) 2 No. of 250 A, 415V, 35kA, 4P MCCB with changeover switch built in

Microprocessor based release unit for Over Current, Short circuit and earth fault

protection with adjustable settings. The breaking capacity of MCCB shall be Icw=Icu.

MCCB shall have in built compatibility through open protocol like Modbus for

SCADA/BMS connectivity (RS485) along with following accessories.

i) 1 No. of Multi Function Meter of accuracy class-1 with all required to measure and

display the Electrical quantities like, Current, Voltage, Active Energy-KWH, Reactive

Energy-kVAH, frequency, Maximum Demand-KVA/KW, Total Hormonic Distortion &

power factor etc. with facility conforming to specifications and latest IEC standards.

MFM shall have in built compatibility through open protocol like Modbus for

SCADA/BMS connectivity (RS485) and all required accessories.

ii) Auxiliary contacts required for necessary interlocking.

iii) Class-B, SPDs shall be provided in panel as per IEC 61643-12 or latest.

GMRC Page 86 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

iv) 1 set of MCB controlled Breaker ON/OFF/TRIP indicating lamps.

v) 1 set of MCB controlled phase indicating lamps for all three phases.

vi) Contractor shall provide an earmarked potential free terminals for SCADA signals as

per specification & requirements.

vii) 3 Nos. of cast resin current transformers of 250/5 ratio with 15VA burden and Class

1.0 for measurement

Electrolytic high conductivity tinned copper three phase and neutral busbars rated at

>160 A suitable to with stand symmetrical fault level of 35kA at 415 V. The neutral

busbar is to be of same size as phases.

a) 2 no.160A, 415V, Ics=25 kA, 4P MCCB’s(Motor Duty) with indicating lamps on each

phase to give indications.

b) 2 no. 63A, 415V, Ics=25 kA, TPN MCCB’s with indicating lamps (red) on each phase to

give indications.

c) 2 no. 20A, 230V, Ics=10 kA, DP MCB’s with indicating lamps (red) on each phase to

give indications.

SITC of A/C Power Panel (ACPP) No.

1.9 Design, Supply, installation, testing commissioning of Essential lighitng and power

panel for Emergency lighting which is fed from DG set. complete as per

specifications & Drawing with following:

1.9.1 Essential Lighting and Power Panel(ELPP)

A Incomer (from EMDB)

1 No. of 63 A, 415V, 25kA, 4P MCCB with built in Microprocessor based release unit

for Over Current, Short circuit and earth fault protection with adjustable settings.

The breaking capacity of MCCB shall be Icw=Icu. MCCB shall have in built

GMRC Page 87 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

compatibility through open protocol like Modbus for SCADA/BMS connectivity

(RS485) each along with following accessories.

i) 1 No. of Multi Function Meter of accuracy class-1 with all required to measure and

display the Electrical quantities like, Current, Voltage, Active Energy-KWH, Reactive

Energy-kVAH, frequency, Maximum Demand-KVA/KW, Total Hormonic Distortion &

power factor etc. with facility conforming to specifications and latest IEC standards.

MFM shall have in built compatibility through open protocol like Modbus for

SCADA/BMS connectivity (RS485) and all required accessories.

ii) 1 set of MCB controlled Breaker ON/OFF/TRIP indicating lamps.

iii) 1 set of MCB controlled phase indicating lamps for all three phases.

iv) Amber healthy trip indicating lamps

v) 3 Nos. of cast resin current transformers of 100/5 ratio with 15VA burden and Class

1.0 for measurement

vi) Auxiliary contacts required for necessary interlocking.

vii) Class-B SPDs shall be provided in all panels and Distribution Boards to meet all

functional requirement as per IEC 61643-12 or latest.

viii) Contractor shall provide an earmarked potential free terminals for SCADA signals as

per specification & requirements.

Electrolytic high conductivity tinned copper three phase and neutral busbars rated at

>63 A as per specification, suitable to withstand symmetrical fault level of 25 kA at

415 V with 100% rated neutral busbar.

4 Nos. of 10A/20A , 415V, 10kA, TPN MCB, with fixed neutral and variable

overcurrent, short circuit releases. Suitably rated AC3 Duty power contactor of with

necessary NO & NC auxiliary contacts as required for operation through BMS, Auto/

GMRC Page 88 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

manual selector switch, 1 set of MCB controlled Breaker ON/OFF/TRIP indicating

lamps, complete as required and approved.

SITC of Essential Lighting & Power panel (ELPP) No.

1.9 "Design, Detail Engineering, Supply, Erection, Testing and Commissioning of

Reactive Power Compensation and power quality Improvement along with

associated equipments & integration with existing protection and BMS system as

per specification and BOQ

1.9.1 Dynamic Reactive Power Compensation Panel , 33kV/0.415kV IGBT-based D-

STATCOM along with other associated equipments, associated control and power

cabling and earthing arrangement as per approved SLD , BOQ and specifications.

Bidder to quote the SITC price per KVAR basis. Actual payment shall be made as per

total KVAR installed at site per station. (Approx. KVAR per station required is 200)

SITC of Dynamic Reactive Power Compensation Panel. KVAR

TOTAL OF MV PANELS

2 MV DISTRIBUTION BOARDS

GMRC Page 89 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

A Supply, installation, testing & commissioning of front operated, front access cubicle

type, dead front, wall / recess/ surface mounted, totally enclosed dust and vermin

proof ( minimum protection IP 54 ) as per drawings and specifications. The

distribution boards shall be of sheet steel enclosure with copper bus bars suitable for

single or three phase MCBs. The MCB DB shall fabricated from 2 mm thick CRCA with

powder coated finish suitable for 415 V, 3-phase, 4 wire, 50 Hz system including

suitably rated insulated copper busbars, interconnections, neutral bar assembly,

phase segregating barriers, LED indicating lamps for incoming and outgoing feeders,

knockouts and gland plates for entry of cables and conduits, all internal wiring using

high temperature PVC FRLSH wires, independant terminals for each phase, neutral &

earthing terminals and including the cost of providing Master key lock on the door

and pad locking facility on door as well as at incomer, bonding to earth etc. complete

as per specification, drawings as required.

a) MCBs shall conform to IEC 60898 (latest) and, with breaking capacity 10 kA at 415 V

AC, current limiting type lower power loss appx 40 - 70% of the stipulated value and

suitable for magnetic releases operating between 3 to 5 times rated current for

normal power distribution application and 5 to 10 times rated current for motor

application duty, with minimum Electrical endurance of the order of 20000 operation

b) RCBO conforming to IEC 61009-1, IS 12640-2 shall be provided with 100mA

sensitivity and electrically connected rated current capacity MCB for short circuit

and over load protection as required

c) All incoming & outgoing feeders of DB shall be terminated on terminal blocks in the

upper compartment including Internal wiring by manufacturer.

d) Class-B SPDs shall be provided in all DB incomers as per IEC 61643-12 or latest.

e) Consider "B" curve for lighting," C" curve for power and "D" curve for UPS circuit

f) Common area DBs and Street Light DBs shall be controlled by

Timer+Contactor.Provision of Auxiliary contactors , push buttons and indicating

lamps for 50% ,75% and 100% selection. Local Remote selector switch for auto local

operation and lighting control from controlled desk BMS located at SCR.

GMRC Page 90 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

g) Variable control through BMS to be adopted to save energy for lighting system for

2.1 Distribution Boards(Type-1) as per specification and Drawing as per following No.

details. LPDB-1, and VD-DB-1,2,3,4 35.00

A Distribution board unit for lighting combined with Small Power consisting of one

compartments and upper compartment for terminal block with respective

incoming 4P MCBs having indications for incoming feeder status as per

specifications and as shown on Drawing and as under:

a) 1 no. 10/ 32 A, 10kA, 4P, MCB

b) 1 set of (R,Y,B, ON, OFF, TRIP) indicating lamps.

OUTGOINGS with feeder.

c) 3 no. 32A DP RCBO for phase segregation.

d) 12 Nos 10/20 Amp SP MCB with feeder on indication Lamp

2.2 Distribution Boards(Type-2) as per specification and Drawing as per following No.

details.( LPDB-2,3,5,6) 35.00

A Distribution board unit for lighting combined with Small Power consisting of one

compartments and upper compartment for terminal block with respective

incoming 4P MCBs having indications for incoming feeder status as per

specifications and as shown on Drawing and as under:

a) 1 no. 10/ 32 A, 10kA, 4P, MCB

b) 1 set of (R,Y,B, ON, OFF, TRIP) indicating lamps.

OUTGOINGS with feeder.

c) 3 no. 32A DP RCBO for phase segregation.

d) 18 Nos 10A/16A/20A/32A SP MCB with feeder on indication Lamp

2.3 Distribution Boards(Type-3) as per specification and Drawing as per following No.

details. ELDB-1,2,3,4,5,6, & UPS-1,2,3,4 63.00

GMRC Page 91 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

A Distribution board unit for lighting with respective incoming DP MCBs having

indications for incoming feeder status as per specifications and as shown on

Drawing and as under:

a) 1 no. 20/40 A, 10kA, DP, MCB

b) 1 set of (R,Y,B, ON, OFF, TRIP) indicating lamps.

OUTGOINGS with feeder.

c) 2 no. 32A DP RCCB .

d) 12 nos. 10A/16A/20A/32A SP MCB with feeder on indication Lamp

2.4 Lighting Distribution Boards (LDB) as per specification and Drawing as per following No.

details.(Advertisement) 21.00

A Distribution board unit for incoming 4P MCCBs having indications for incoming

feeder status as per specifications and as shown on Drawing and as under:

a) 1 no. 63 A, 16kA, 4P, MCCB

b) 1 set of (R,Y,B, ON, OFF, TRIP) indicating lamps.

OUTGOINGS with feeder.

a) 9 Nos. of 20A/32A SP MCB arranged in sets of 3 nos. per phase with feeder on

indication Lamp

2.5 AC Distribution Board (ACDB) as per specification & Drawing & as per following No.

A Distribution board unit for incoming 4 pole MCBs having indications for incoming

feeder status as per specifications and as shown on Drawing and as under:

a) 1 no. 20/63 A, 10kA, 4P, MCB

b) 1 set of (R,Y,B, ON, OFF, TRIP) indicating lamps.

Contractor shall provide an earmarked potential free terminals for SCADA signals as

per specification & requirements.

GMRC Page 92 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

OUTGOINGS with feeder.

c) 3 no. 40A DP RCBO for phase segregation.

d) 24 nos. 16A, DP MCB C-Curve each having indication lamps to give status.

2.6 Distribution Boards as per specification and Drawing as per following No.

details.(Signage DB) 7.00

A Distribution board unit for lighting with respective incoming TPN MCBs having

indications for incoming feeder status as per specifications and as shown on

Drawing and as under:

a) 1 no. 20/40 A, 10kA, 4P, MCB

b) 1 set of (R,Y,B, ON, OFF, TRIP) indicating lamps.

OUTGOINGS with feeder.

c) 3 no. 32A DP RCBO for phase segregation.

d) 10 nos. 10A/16A/20A/32A TPN MCB with feeder on indication Lamp

2.7 Distribution Boards as per specification and Drawing as per following No.

details.(OUTDOOR VRV DB) 7.00

A Distribution board unit for lighting with respective incoming Four pole MCCBs

having indications for incoming feeder status as per specifications and as shown on

Drawing and as under:

a) 1 no. 160 A, 25kA, 4P, MCCB with microprocessor based release having continously

adjustable current setting in the range of 0.4 to 1.0 and 2-10 times of short circuit

protection as per Technical specification enclosed. Shall be suitable for total

discrimination.

b) 1 set of (R,Y,B, ON, OFF, TRIP) indicating lamps.

OUTGOINGS with feeder.

c) 4 nos. 100A TPN MCCB with FEEDER ON indication Lamp

2.8 ENCLOSURE/ISOLATOR BOX

GMRC Page 93 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

A Design, Supply, Installation, Testing and Commissioning of Enclosure/Isolator Box

fabricated using CRCA Sheet Steel of 2mm. thick and powder coated (65 Micron

Minimum) surface/recess mountable unit having IP 54 with suitable current rated

TPN MCCB inbuilt with 100mA Earth fault release, spreaders & shrouds at all

terminals, gland plate for incoming & outgoing cables and with suitably rated MCB

controlled multiple LED lamps (Red, Yellow, Blue) for Phase indication and (Red,

Green, Amber) for ON, OFF & Trip status with all required accessories suitable for

230 VAC operation complete as required and approved.

a) 63A, TPN MCCB inbuilt with 100mA Earth fault release, complete as required. No.

b) 125A, TPN MCCB inbuilt with 100mA Earth fault release, complete as required. No.

TOTAL OF DISTRIBUTION BOARDS

3 MV CABLING & CABLE TRAYS

3.1 Power Cables

Supply, laying, testing and commissioning of 1100 V grade, XLPE insulated, PVC

extruded, armoured, FRLSH, Conductor cables as per Technical specification on

existing trays/ walls/ columns /indoor /trenches including the cost of supports with

suitable clamps, saddles, hooks, Anchor fasteners, bolts etc. including proper

dressing of cables, Route markers, providing identification tags, earthing of glands

armouring etc. complete as per specifications and as required. The cost of cable

trays excavation and back filling of trenches will be measured separate. The cost shall

include Heat Shrinkable cable jointing kits for joining cables wherever joints are

unavoidable due to unavailability of required length of cable in standard drum

a) 3.5 core 240 sq. mm Al Conductor RM

b) 3.5 core 150 sq. mm Al Conductor RM

c) 3.5 core 120 sq. mm Al Conductor RM

GMRC Page 94 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

d) 3.5 core 70 sq. mm Al Conductor RM

e) 3.5 core 50 sq. mm Al Conductor RM

f) 3.5 core 35 sq. mm Al Conductor RM

g) 4 core 16 sq. mm Cu Conductor RM

h) 4 core 10 sq. mm Cu Conductor RM

i) 3 core 16 sq. mm Cu Conductor RM

j) 3 core 10 sq. mm Cu Conductor RM

k) 3 core 6 sq. mm Cu Conductor RM

l) 3 core 4 sq. mm Cu Conductor RM

m) 4 core 2.5 sq. mm Cu Conductor RM

n) 1 core 16 sq. mm Cu Conductor RM

o) 1 core 95 sq. mm Cu Conductor RM

p) 3.5 core 95 sq. mm Al Conductor RM

GMRC Page 95 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

3.2 Cable end termination of cables detailed in item 3.1.1 above - including cost of

supplying and fixing of tinned copper Crimping type lugs, double compression brass

glands including earthing, insulation tape etc. Gland should be earthed individually

with gland ring copper strip and copper wire, complete as per specifications and as

a) 3.5 core 240 sq. mm Al Conductor No.

b) 3.5 core 150 sq. mm Al Conductor No.

c) 3.5 core 120 sq. mm Al Conductor No.

d) 3.5 core 70 sq. mm Al Conductor No.

e) 3.5 core 50 sq. mm Al Conductor No.

f) 3.5 core 35 sq. mm Al Conductor No.

g) 4 core 16 sq. mm Cu Conductor No.

h) 4 core 10 sq. mm Cu Conductor No.

l) 3 core 16 sq. mm Cu Conductor No.

j) 3 core 10 sq. mm Cu Conductor No.

k) 3 core 6 sq. mm Cu Conductor No.

l) 3 core 4 sq. mm Cu Conductor No.

m) 4 core 2.5 sq. mm Cu Conductor No.

n) 1 core 16 sq. mm Cu Conductor No.

GMRC Page 96 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

o) 1 core 95 sq. mm Cu Conductor No.

p) 12 C x 1.5 sq. mm Cu Conductor No.

q) 3.5 core 95 sq. mm Al Conductor No.

3.3 Supply, laying, testing and commissioning of Control cables of following size cables as

per List of approved makes including the cost of jointing & termination with required

a) 2 C x 1.5 sq. mm Cu Conductor RM

b) 12 C x 1.5 sq. mm Cu Conductor RM

c) 19 C x 1.5 sq. mm Cu Conductor RM

3.4 Cable Trays

3.4.1 Supply, installation of factory fabricated, perforated, hot dip galvanized (Minimum

Thickness shall be 85 microns), double bended cable trays from 2 mm thick sheet

steel continuously connected including inward, outward, horizontal & vertical bends,

reducers, tees, flexible earth connector and other accessories. All the cable tray

accessories shall be factory pre-fabricated, until otherwise specific approval is

obtained to fabricate at site.

a) 300 mm wide x 50 mm depth RM

b) 150 mm wide x 50mm depth RM

c) 100 mm wide x 50mm depth RM

d) 50 mm wide x 50mm depth RM

GMRC Page 97 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

3.4.2 Supply, installation of factory fabricated Ladder type hot dip (welded) galvanized

cable trays (Minimum Thickness shall be 85 microns) from 2.5 mm thick sheet steel

continuously connected including inward, outward, horizontal & vertical bends,

reducers, tees, flexible earth connector and other accessories. All the cable tray

accessories shall be factory pre-fabricated, until otherwise specific approval is

obtained to fabricate at site. Runner size shall be 75mm x 20mm x 2.5 mm and Rung

size 30mm x 20mm x 2.5mm with centre to centre distance of 250mm, as required.

a) 600 mm wide X 75 mm height RM

b) 300 mm wide X 75 mm height RM

3.4.3 Supply & erection of support brackets made out of Hot dip galvanised factory

fabricated cantilever support /channels in conformance to IEC 61537 to the required

size and shape.

a) Supply and installation as required for Factory Fabricated Hot dip galvanized (65 Kgs

micron thick) cantilever bracket support / fabricated member for fixing to wall/ 1,16,647.30

ceiling/beam and for use with cable tray systems or cable ladder system in terms of

IEC 61537 or Pendent with Mid support Bracket with high level of workmanship and

design approprietly sized as required in terms of the IEC 61537 for uniform

distibution and design appropiately sized as required in terms of the IEC 61537 for

uniform distribution of Load.

Note: Trays shall be supported adequately using galvanized structural members. This

support should be capable of withstanding the weight of the equivalent weight of 3m

length of cables laid over it. Rigid ISA / ISMC / ISMB / flats/ Vertical Rods support

shall be provided at every 1m length and also at diversions, crossings, bends and

multi layered locations.At turns the support has to be double and at both ends of the

3.5 Supply and fixing of Raceway junction box made out of 2.0mm thick sheet steel with

hot dip galvanizing finishing including polished 3/5mm Thick SS 304 top cover, fixed

with SS Counter Sunk screw of sufficient length.

GMRC Page 98 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

a) 250 x 250 x 75 deep box with polished 5mm SS sheet top cover No.

b) 150 x 150 x 75 deep box with polished 3mm SS sheet top cover No.

c) 100 x 100 x 75 deep box with polished 3mm SS sheet top cover No.

3.6 Supply and laying of raceway made of 2mm thick GI sheet with top cover race way

trunking of different size along with (covered in the followed item) as required. Note:

The rate is inclusive of all fixing arrangement, steel parts, welding work etc. as

required Contractor shall get the drawing / design of raceway approved from the

Engineer before bulk fabrication.

a) 200 x 50 x 2mm thick RM

b) 150 x 50 x 2mm thick RM

c) 100 x 50 x 2mm thick RM

TOTAL OF MV CABLE, CABLE TRAYS and RACEWAYS

4 WIRING SYSTEM

4.1 Supply & laying of conduit and wiring for the following light / Ceiling Fan/ Signage

with 3 x 2.5 sq. mm, 1100 Volt grade PVC insulated FRLSH copper condutor wires in

heavy gauge 25mm dia GI conduit (16 SWG) surface run with GI saddles, or

concealed or in GI raceway including chases and complete with GI junction boxes,

pull boxes, inspection boxes,bends & other accessories etc. including insulated

Protective Earth (PE) Conductor and earthing of switch boxes excluding the cost of

switches/sockets and switch boxes.as specified and as under:

First point controlled by one Swichboard (6A switch)/10A MCB No.

GMRC Page 99 of

TENDER NO. GMRC/CONS/STNS+VDCT-2/2026 BOQ

4.2 Secondary or looping points wiring as specified in 4.1 above using 3x2.5 copper No.

(P+N+PE) wires in 25 dia GI conduit (16 SWG) for lights, fans, socket outletsincluding 1,848.00

providing terminal block, ceiling rose & other accessories etc as required (exlcuding

the cost of switches, sockets & switch boxes) as per specifications and drawings as

4.3 Supply & laying of wiring for the following light point with 3 core x 2.5 sq. mm,

Volt grade PVC insulated FRLSH copper condutor flexible cabe in existing raceway or

existing heavy gauge GI conduit (16 SWG) surface run with GI saddles, or concealed

or in GI raceway including chases and complete with GI junction boxes, pull boxes,

inspection boxes,bends & other accessories etc. including insulated Protective Earth

(PE) Conductor and earthing excluding the cost of MCB as specified and as under:

One point controlled by 10A MCB. No.

4.4 Secondary or looping points wiring as specified in 4.3 above using 3 core x 2.5 sq. mm No.

insulated copper (P+N+PE) flexible cable in existing GI raceway for lights on Platform 1,680.00

outlets including providing terminal block, ceiling rose & other accessories etc as

required (exlcuding the cost of switches, sockets & switch boxes) as per

specifications and drawings as required

4.5 Supply & laying of conduit and wiring for the following 16A / 32A socket outlet point

with 3 x 6 sq. mm, 1100 Volt grade PVC insulated FRLSH copper condutor wires in

heavy gauge GI conduit (16 SWG) surface run with GI saddles.

a) One no. 16A /32A socket outlet point controlled by one 16A switch / 32A MCB. No.

4.6 Secondary or looping 16A socket outlet points wiring as specified in 4.5 above using 3 No.

x 4 sq. mm copper (P+N+PE) wires in 25 dia GI conduit (16 SWG) for socket 560.00

outletsincluding providing terminal block, ceiling rose & other accessories etc as

required (exlcuding the cost of switches, sockets & switch boxes) as per

specifications and drawings as required

With regard to Item Nos.4.1 to 4.6, for further clarifications, the sample

measurement system to be followed is given below :-

GMRC Page 100 of