C/O Govt. Sen. Sec. School Building at Habban Tehsil Rajgarh Distt. Sirmour H.P

Amount

Excavation in earth work in all kinds of soils, soil by mechanical means Hydraulic excavator in foundation trenches or drains in all heights and depths including dressing of sides and ramming of bottoms, lift upto all height including getting out the excavated soil and disposal of surplus excavated soils as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Supplying and filling in plinth with sand under floors, including watering, romming, consolidating and dressing complete as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying cement concrete 1:6:12 [ One cement : Six sand : Twelve graded crushed hard stone aggregate 40 (Forty)millimetre nominal size] and curing complete, excluding cost of centering and shuttering and shuttering in foundation and plinth as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying cement concrete 1:2:4 (One Cement : Two coarse sand :Four graded stone aggregate 40 mm nominal size) in position up to foundations and plinth level of specified grade excluding the cost of centering and shuttering as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying cement concrete 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) in position up to foundations and plinth level of specified grade excluding the cost of centering and shuttering as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and Laying cement concrete 1:3:6 ( One cement :three sand : six graded crushed hard stone aggregate 20mm( millimeters nominal size) mechanically mixed vibrated and curing complete , excluding cost of form work in foundation and plinth , as per H.P.P.W.D. spesification 1990 Volume-I including carriage of all labour , equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and applying a coat of residual petroleum bitumen of grad of VG-10 approved quality using 1.7 kg (One point Seven Kilogramme) per square meter on dump proof course as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing under layer for plinth protection of 75 (seventy five) millimetre thick (unconsolidated) bed dry brick /stone aggregate 40 (forty)millimetre nominal size as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Making plinth protection 50mm thick of cement concrete 1:3:6 (One cement : Three sand :Six graded stone aggregate 20 mm nominal size) over 75mm (Seventy Five millimetre) thick bed of dry brick ballast 40 mm(Forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing form work with steel plates 3.15 (Three point One Five ) millimeters thick welded with angle iron in frame 30 x 30 x 5 (Thirty into Thirty into Five ) millimeters, so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in all heights of propping and centering below supporting floor to ceiling and removal of the same in-situ-reinforced concrete and plain concrete work in Foundation footings and bases of columns etc. and mass concrete as per HP.PWD specification, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges in:-

Foundation footing and basis of columns, etc. and mass concrete.

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and contilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Stairs, (excluding landings) except spiral staircases

Edges of slabs and breaks in floors and walls under 20 cm wide.

Walls (any thickness) including attached pilasters, buttresses,plinth and string courses etc.

Providing and laying mix M-25 grade cement concrete 1:1.5:3 (One cement isto One point Five sand isto Three graded stone aggregate 20 mm nominal size)in Suspended floor, roofs landing shelves and their support balconies, beam, girders bressumers and cantilevers in all floor up to all hights and levels in position machine batched and machine mixed design for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing tor steel reinforcement for reinforced cement concrete work including bending binding and placing in position complete up to floor level all heights as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying mix M-25 grade cement concrete 1:1.5:3 (One cement isto One point Five sand isto Three graded stone aggregate 20 mm nominal size) in position machine batched and machine mixed design for reinforced cement concrete work, using cement content upto all floor level as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Brick work with modular bricks common burnt clay machine moulded perforated bricks of class designation 7.5 in superstructure above plinth level up to floor five level in cement mortar 1:6 (I cement : 6 coarse sand) as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Half brick masonry with common burnt clay F.P.S. (modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level with Cement mortar 1:3 ( 1 cement : 3coarse sand) as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Half brick masonry in Second class comman burnt cly building bricks in cement mortar 1:4 (one cement isto four sand ) in foundation and plingth in all debths and levels as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Random rubble masonary/ polygonal rubble masonary(uncoarsed)/brought to courses) with hard stone of approved quality in foundation in plinth including levelling up with cement concrete 1:6:12 (one cemet :6 sand :12 graded stone aggregate 20mm) nominal size in cement mortar 1:6 (1cement :6 sand) as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Stone filling under floor as per the direction of Eingineer-in-charge including carriage of materials as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and Fixing Chromium plated brass curtain rod having wall thickness of 1.25mm(one point Twenty Five millimeter) with two chromium plated brass brackets fixed with c.p brass screws and pvc sleeves as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. Flats,square or round bars etc.including priming coat with approved steel primer all complete.Fixed to steel windows by welding as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

providing 40x5mm (Forty into Five millimetre) Flat iron hold fast 40cm (Forty Centermer) long including fixing to frame with 10mm (Ten millimetre) diameter bolts,nuts and wooden plugs and embeding in cement concrete block 30x10x15cm (Thirty into Ten into Fifteen centemer) Cement concrete 1:3:6 ( One cement :three sand : six graded crushed hard stone aggregate 20mm millimeters nominal size) as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and Fixing 35mm (Thirty Five millimetre) thick factory made laminated veneer lumber door shutter confirming to IS : 14616 and TADS 15;2001(part B) fixing with butt hinges of required size with necessary screws,all complete as per the direction of enigneer-in-charge and paneling with panels of 12 mm (twelve millimeter) thick one side pre-laminated particle board (decorative lamination on one side and other sides balancing lamination)grade 1,medium density flat pressed,three layer particle board PT-I or graded wood particle board FPT-1 confirming to IS : 3087 bonded withBWP type synthetic resin adhesive as per IS : 848 and pre laminated confirming to IS: 12823,Grade-1,TypeII marked as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 19mm (ninteen millimetre) thick terrmite resistant water proof commercial board box including shelves and shutters,the back side of cup board/cabinet of 8mm thick ply and cut portions of shelves shall be finished with 6mm hard board edging. The cut portion of shutters from all the sides shall be finished with 12mm thick hard wood edging. The shutters from outside shall be finished with 1mm thick laminated of approved shade including piano hinges and magnetic catcher with all accessories complete. as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and Laying 19mm (ninteen millimetre) thick commercial board shutters with hard wood edging and PGI sheet lining inside of shutter of approved size including bright finished iron butt hingesetc.Complete as per detailed arch.Drawing for the work as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing Twin rubber stopper aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 300x16 mm (three hunder into Sixteen millimeter) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 65x35mm (Sixty Five into Thirty Five millimetre) special quality chromium plated brass cup board lock with six leaves including necessary screws etc. Complet eas per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 100mm (hundred millimetre) bright finished hard drawn hooks and eye as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 150 mm (One hundred Fifty millimetre) oxidised M.S. double acting spring hinges with necessary screws etc. complete as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete e as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works e as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing M.S. fan clamp type I or II of 16mm dia M.s. bar bent to shape with hooked ends in Rcc slabs or beams during laying,including,painting the exposed portion of loop,all as per standard design complete e as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing M.S. channels doors,windows frames manufactured from M.s section ISMC 75x40mm & M.S flat 75x5mm as per direction of engineer in charge and drawing including hinges jambs beadand if required angle threshold M.S angle50x25mm welded or rigidly fixed by mechanical means with split end tails to each jamb including steel butt hinges 25mm and provisions of lacking arrangements and shock observer as specified and applying a coat of approved steel primer after pretreatment of surface as directed by the Eingineer-in-charge including carriage of materials with all leads and lifts.

Providing and fixing angle iron cupboard frames manufactured from m.S. Angle iron section 25x25x5mm thickness including hinges jamb,lock jamb,bead and if required angle htrashold of mild steel angle 25x25mm welded or rigidly fixed by mechainical means,lugs with split ends tails to each jamb including steel butt hinges 2.5mm thick with provision foer locking arrangement and shock observer e as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing M.S channels door, windows frames manufactured from M.S section ISMC75x40mm &M.s flat 75x5mm in combination welded together and standard window shutter having style of Z-section with T-section of 25x25x3mm and angle iron 25x15x3mm as per drawing complete with fitting and necessary screws and applying a priming coat with red lead paint complete e as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Side hung

Top hung

Fixed

Providing and fixing steel wire gauge shutter in Z-section using galvanised M.S wire gauge of I.S. gauge designation 85g with wire of dia .56mm for doors,windows andclerstory windows with metal beading of approved quality and shape section with necessary screws and applying a coat of primer with red lead paint complete, approved designe and as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm (twenty into Ten into Two millimetre) and braced with flat iron diagonals 20x5 mm size (twenty into Five millimetre), with top and bottom rail of T-iron 40x40x6 mm,(Forty into Forty into Six millimetre) with 40 mm(Forty millimetre) dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer e as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Cement concrete flooring 1:2:4(one cement : two sand : four graded stone aggregate 20mm (twenty millimetet) nominal size laid in one layer finished with a floting coat of neat cement 40 mm (forty millimetre) thick as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Mirror polish Kota stone slab flooring over 20 mm (Twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1cement : 4 coarse sand) : 20 mm (Twenty millimetre) thick e as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Kota stone slabs 20 mm (Twenty millimetre)thick in risers of steps, skirting, dado and pillars laid on 12 mm (Twelve millimetre)(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 2mm (Twenty millimetre)thick PVC antistatic venyl Flooring plain or coloured carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 2mm (Twenty millimetre) thick PVC antistatic venyl Skirting plain or coloured carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying vitrified floor tiles in 600x600 mm (Six hundred into Six hundred millimetre) thickness to be specified by the manufacturer) with water absorption less than 0.08% ( Zeero Point Zeero Eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 12mm (Twelve millimetre) thick cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point Three Kg per square metre) including grouting the joints with white cement and matching pigments etc., complete. as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying vitrified tiles in 600x600 mm (Six hundred into Six hundred millimetre)thickness to be specified by the manufacturer) with water absorption less than 0.08% ( Zeero Point Zeero Eight percent) and conforming to IS: 15622, of approved make, in all colours and shades,in skirting,riser of steps laid on 12mm (Twelve millimetre) thick cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point Three Kg per square metre) including grouting the joints with white cement and matching pigments etc., complete. as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 1st quality ceramic glazed floor tiles of size 300x300mm (Three hundred into Three hundred millimetre) conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (Twelve millimetre)thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (Three point Three Kg per square metre) including grouting the joints with white cement and matching pigments etc., complete. as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 1st quality ceramic glazed tiles for skirting conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (Twelve millimetre) thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (Three point Three Kg per square metre) including grouting the joints with white cement and matching pigments etc., complete. as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Marble work gang saw cut Baroda Green Marble (polished and machine cut) of thickness 18 mm (Eighteen millimetre) for wall lining (veneer work), backing filled with a grout of average 12 mm (Twelve millimetre) thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately)as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Stone work Red sand stone in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

12mm thick green chalk board (non magnetci with superior quality framing specially anodized aluminium profile 20x15mm (twenty into Fifteen millimetre) with corners of black plastic shall be provided. The board surface shall shall be non porous cermaic particle on the top on the green surface for the writing with chalk over 11mm (Eleven millimetre) thick particle board which shall have backing material of galavanized sheet 28 mm (Twenty Eight millimetre) thick The board shall be fix on the wall with specific designed "J" clumps and square clamps with the help of nylon sleeves and screws as per site requirement complete as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 0.60mm ( Zero point sixty millimeter) thick pre-painted steel sheet of TATA/ /DUROSHINE in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 ( Twenty ) micron over 5 ( Five ) miocrons primer coating to back coat of polyster of 5 ( Five ) microns over 5 ( Five) microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts , 6mm diametre with prepainted limpet and rubber washers complete with all accessories as required as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges. .

Providing and fixing ridges or hips 90cm. (Ninety centimetres) overall with 0.60mm (Zero point sixty millimeter) thick prepainted steel sheets TATA/ /DUROSHINE in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20( Twenty ) microns over 5 ( Five ) micron primer coating + back coat of polyster of 5 ( Five) microns over 5 micro primer coating including fixing with prepainted iron, J or L hooks bolts and nuts ,6mm(Six milimetre) diametre and prepainted G.I limpet and bitumen washer complete with all accessories as required as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing valley 60cm(sixty centmetre) overall 0.60mm (Zeero point Sixty millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyester 5 microns over 5 microns primer coating including fixing with screws pre painted iron J or L hooks,bolts and nuts 6mm (Six millimetre) diameter with pre-painted GI limpet and bitumen washers complete with all accesories as required as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and Fixing flushing 38 cm (Thirty Eight centemetre) overall with 0.60mm (Zeero point Sixty millimetre) thick prepainted steel sheet in roofing with dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 2 microns over 5 microns primer coating plus back coat of polyster of 5 microns over 5 microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm diameter with prepainted GI limpet and bitumen washers complete with all accessories as required as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 15 cm wide 45cm overall semicircular plain G.S sheet gutter with iron brackets 40x3mm size,bolts,nuts and washers etc.including making necessary connections with rain water pipes complete 0.63 thick with zinc coating not less than 275 cm/m2 as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing M.S B.P sheet 1.66 mm to 2mm ( One point sixty six millimeter to two millimeter) thick in eaves board/facia/soffits/ceiling including cutting , fixing and welding to steel roof members as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm dia and weighing not less than 440 gm.(Four hundred Forty gramme) as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 110mm (One hundred Ten millimetre) dia on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5kg/sqm including filling the joints with approved adhesive complete.as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing on wall face PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

110mm dia pvc plain bend

110mm dia pvc shoe

Providing and fixing pvc clamps for 110mm (One hundred Ten millimetre)dia pipe as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

15 (fieteen) millimeters thick cement plaster in single coat on the rough of brick / concrete/stone walls for interior plasterig up to all hights including arises. Internal rounded angles, chamfers and rounded angles not exceeding 80 (eighty) millimeters in grith and finished even and smooth in cement mortar 1:6 (one cement : six sand) as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

15 (fieteen) millimeters thick cement plaster in single coat on the fair side of brick / concrete/stone walls for interior plasterig up to all hights including arises. Internal rounded angles, chamfers and rounded angles not exceeding 80 (eighty) millimeters in grith and finished even and smooth in cement mortar 1:6 (one cement : six sand)as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

6mm (Six millimetre ) thick cement plaster to Ceiling in mix cement mortar 1:3 (One cement isto Three fine sand) as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade New work two or more coats applied21.43ltr/10sqm over and including priming coat of exterior primer applied 0.90 ltr/10sqm as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content not less than 50gm/ltrof approved manufacturer, of required shade and colour complete, as per manufacturer's specification . Two or more coats on new work as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade. as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Painting steel work with deluxe multi surface paint to give an even shade two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied@ 0.80ltr/10sqm of approved brand and manufacture other than white as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing band laying white cement based putty of average thickness 1mm of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing MS railing for stair case having balluster of 19mm x19mm (Ninteen into Ninteen millimetre) square bar with a clear height of 85cm embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mm x 6mm (Forty into Six millimetre) size complete with a applying priming coat of red lead paint as per drawing specification and as per direction of Engineer-in-charge.

Providing and fixing railling for ramp having baullster of 25 mm dia (twenty Five Millimetre) hollow M.S. pipe(ISG-18) gauge with a clear height of 75 & 90 as per detail@ 60cm C/C jointing in C.C steps and jointed with electrical gas welding at top along with hand rail of hollow M.S pipe with slip resistence 50mm dia.(ISG-181)M.S flat of 50x5mm complete and applying coating with red lead paint as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing moulded hand rail of M.S hollow pipe 50mm (Fifty Millimetre) dia welded in straight length over M.S flat at top of vertical baullster including one coat of red oxside priming coat complete (M.S flat and Baluster of railing shall be measured &paid seperately) as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing in position standard steel Grade 200mm (Two hundred Millimetre) wide 304 (Three hundred Four) plate-1.0mm (Ten millimetre) thick asper design for expansion joints as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying water proofing treatment, by applying cement slurry mixed with water proofing cement compound of Dr.Fixit Padfin or equivalent consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm. Mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hour. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Constructing Coursed rubble hammer dressed 'U' shape open surface drain with side wall. 15 X 23 cm (Fifteen into twenty three centimeter ) in cement mortar 1:6 ( One Cement : Six approved Sand) and inside plastering with cement mortar 1:3 (One Cement: Three approved Sand) including earth work and laying 10 cm (Ten Centimatre ) cement concrete in 1:5:10 (One Cement : Five approved Sand : Ten graded crushed stone aggregate) of 40 mm (Forty millimetres) nominal size and 7.5 cm (seven Point Five Centimatre ) cement concrete 1:2:4 (One Cement : Two approved Sand : Four graded crushed stone aggregate of 20 mm (Twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design.

Providing and fixing G.I pipes complete with G.I fittings i/c trenching and refilling etc. External work as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

(a) 20mm nominal bore

(b) 32mm nominal bore

© 15mm nominal bore

Making connecting of G.I distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40mm nominal bore as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Fixing water meter and stop cock in G.I pipe line including cutting and threading the pipe and making long screws etc. complete (Cost of water meter and stop cock to be paid separately) as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing Polyethelene-Aluminium Polyethelene PE-AL-PE composite pressure pipes conforming to IS-15450, U.V. stabilized with carbon back having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 degree c , including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer-in-charge. Concealed work, including cutting chases and making good the wall etc. as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

i) 2532 (32mm OD) Pipe

ii) 2025 (25mm OD) Pipe

iii) 1620 (20mm OD) Pipe

iv) 1216 (16mm OD) Pipe

P/F W/C Squating pan (indian type w/c pan ) with 100mm sand cast iron P or S trap,10ltr low level white pvc flushing cistern,including flush pipe, with manually controlled device(handle lever) confirming to IS 7231,with all fittings and fixtures complete including cuttting and making good the walls and floors wherever required: white vitrous china orrisa pattern w/c pan of size 580x440 mm with integral type foot rests as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F viterous chain wash basin c88863 (505x405x155) basin (half pedestal in white shade of perryware/Jaqar/Hindware/Cera or equivalent including cutting holes & making good the same and carriage of materials within all leads and lifts:- of quality as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F whitevitreous chain pedestal for wash basin completely recessed at the back for the reception of pipes and fittings as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete. Semi rigid pipe 40mm dia as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F uplasticised PVC connection pipe with brass unions 45cm length 15mm nominal bore as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (Newwork 40mm dia) as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F C.P. brass long nose bib cock cat no. CON 107KN jaquar or equivalent single control of approved quality conforming to IS standards 15mm nominal bore as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F swan neck pillar tap with left hand operating knob single control CON-CHR-123KN of jaquar or equivalent complete. as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F OPP-1500PM pillar tap jaquar or equivalent as per direction complete as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F Angular stop cock with wall flabge of opel prime no. CON150083KN stop cock of jaquar or equavalent complete in all respect as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F Angular stop cock with wall flabge of opel prime no. CON150083KN stop cock PM single control of jaquar or equavalent complete in all respect as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F Angular stop cock with wall flabge of opel prime no. CON053KN of jaquar or equavalent complete in all respect as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F Angular stop cock with wall flabge of opel prime no. CON150053PM of jaquar or equavalent complete in all respect as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F OPP-15001PM pillar cock jaquar or equavalent as per direction complete as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F Soap dish recessed type stainless steel AHS-1531 of jaquar or equavalent complete in all respect as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F Soap dish stainless steel CAN-1131N of jaquar or equavalent complete in all respect as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F towel rack with lower hanger No. AHS-1581H of hotelier series of jaquar or equavalent of superior quality as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F corner glass self with bract No.ACN-1173 of hotelier series of JAQUAR, ESS-ESS or equivalent of superior quality as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F glass shelf 550mm long with C.P. brass bracket and guard rail no. AQN-7771 of jaquar or equivalent fixed with C.P. brass screws etc. complete as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F U shaped wall mounted rail with hinges 600x100mm cat No. B2210107 and wall mounted grab bar 600mm long CAT NO. B2210106 jaquar or equivatent superior quality as per direction of Engineer-in-Charge. Jaquar as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F 8mm dia C.P./S.S. jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in-Charge.

P/F gun metal gate valve with C.I. wheel of approved quality (Screwed end)as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New Work)as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F Polyethelene-Aluminium-Polyethelene PE-AL-PE composite tank IS: 12701 marketed with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 1000 liter capacity as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F ball valve (brass) of approved quality, high or low pressure, with plastic floats complete 15mm nominal bore as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F 110m high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F 150m high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

providing and fixing 110 mm (one hundred ten millimeter) dia PVC cowl including carriage of materials within all leads and lifts as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Suppliying and fixing 455 mm x 610 mm (four hundred fifty five into six hundered ten millimeters ) cast iron cover without frame for manholes complete including carriage of materials in all leads and lifts as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F 110 x 90 mm PVC floor trap of self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floors etc. complete as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F PVC door bend with ovalaccess door, intertion rubble washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesice etc as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

i) 110mm dia

ii) 150mm dia

P/F PVC plain bend ISI marked including fixing with approved adhesive etc. complete as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

i) 110mm dia

ii) 150mm dia

P/F PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

i) 110mm dia

ii) 150mm dia

Providing and Fixing PVC Single Equal Branch with oval Access door ISI Marked insertion rubble washer 3mm thick Bolts and nuts complete including fixing with approved adhesive etc complete as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges. .

i) 110mm dia

ii) 150mm dia

P/F PVC collars ISI marked including fixing with approved adhesive etc. complete as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

i) 110mm dia

ii) 150mm dia

P/F PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

i) 110mm dia

ii) 150mm dia

Constructing brick massonry manhole in cement mortar 1:4 with RCC top slab with Cement concrete 1:1.5:3(One cement isto One point Five sand isto Three graded stone aggregate 20 mm nominal size)in foundation Cement concrete 1:4:8 (one Cement : Four coarse sand : Eight graded stone aggregate 40 mm nominal size) inside plastering 12mm thick with cement mortar 1:3 finished with floating coat of neat cement and making channels in cement concrete 1:2:4 aggregate (One Cement : Two coarse sand :Four graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. inside size 120x90cm and 90cm deep including C.I cover frame (medium duty) 500mm internal diameter total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg)with sewer bricks conforming to IS : 4885 as per direction of Engineer-incharge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W drain pipe 100mm dia meter and 1.20m long complete as per standard design as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Cement Brick msanory chamber for underground C.I inspection chamber with bricks in cement mortar 1:4 cover with frame 455x610mm (Four hundred Fifty five into Tan millimetre) lightduty internal diameter with common burnt clay F.P.S (Non modular) bricks of class designation 7.5 as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/L non pressure NP-3 class (Medium duty) 450mm(Four hundred Fifty millimetre) dia RCC pipes From plinth drain to under ground water drainage system near ground including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 including testing of joints etc. complete as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Supplying and filling crushed stone aggregates in soak pit of following sizes including carriage of materials with in all leads and lifts. 25mm (twentyfive millimeter) nominal size as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

12mm ( tweleve millimeter) nominal size

Providing weep holes in brick masonry/stone masonry plain reinforced concrete retaining/breast wall with 100mm (Hundred millimeter) dia PVC pipe extending throughout the full width of the struture with slope of 1(V):20(H) towards drawing face complete as per direction of Engineer-in charge and H.P. PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.