A n n u a l P l a n - D P - P K D - 2 0 2 5 - 2 6 - K U N U K U L A M R O A D I N THIRUVEGAPURA GP

APENDIX A-ROAD CONCRETE & RESTORATION WORK

OD387044/2025-2026:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil

3.5.2:Excavation in Soil with Dozer with lead upto 100 m Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.

4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1) <br> (A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. <br> (i) For Grading I Material

OD387049/2025-2026:Flooring with Interlocking paving blocks 80 mm thick M30 grade over a bed of 6 mm metal filling in 50 mm average thick and compacting using earth hammer/compacting ting machine hand operated including cost and conveyance of all materials, labor charges , etc., complete. Excluding cost of edges concreting (16.91.2 modified)

75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)

4.9:Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. By Mechanical Means with 1 km lead

OD387050/2025-2026:Name Board (MORD): Supplying and providing ready made GI name board with all conveyance, labour and hire charges etc complete using GI hollow tube of size 80x40x1.4mm Post, 40x20x1.4 mm outer frame,0.6mm thick iron sheet of size 90x60cm with two coat of enamel painting over a coat of primer , lettering with suitable co lour and size ,fixing the post in ground with C:C 1:2:4 etc complete.

Please Enable Macros to View BoQ information