Kerala

Active

Works

Civil Works - Buildings

MAINTENANCE OF ANGANWADIES IN WARD 15 WARD 16 VENKITANGU GP

Local Self Government Department

VENKITANGU | Thrissur, Kerala

Amount: ₹3.3 LCloses: 6 Oct 20266d left

Timeline

Published28 Sept 2026
Closes6 Oct 2026
Bid Opening8 Oct 2026

Tender Value

₹3.3 L

EMD Value

₹8,153

Closing Date

6 Oct 2026, 6:00 pm6d left

Tender Inviting Organisation

Name

ASSISTANT ENGINEER

Address

ASSISTANT ENGINEER LSGD SECTION VENKITANGU GP

Work Description

Truss work and sheet roofing Store room Tile flooring Painting

Tender Information

Tender ID

2026_LSGD_873068_4

Reference Number

T2/2026-27/AE/6

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Percentage

Period of Work

300 days

Location

VENKITANGU

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredBILL OF QUANTITY (.xls)

RequiredP agreement (.pdf)

RequiredEPAY FORM (.pdf)

RequiredINTEGRITY PACT (.pdf)

RequiredAFFIDAVICT (.pdf)

RequiredFORM OF TENDER (.pdf)

RequiredSBD (.pdf)

Fee & Financial Details

Tender Fee Amount

₹720

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹8,153

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

28 Sept 2026

Published

28 Sept 2026

Bid Opening

8 Oct 2026

Download Starts

28 Sept 2026

Download Ends

6 Oct 2026

Submission Starts

28 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (23 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Building maintenence
1.001	50.6.3.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete	1.04	cum	8,645.65	₹9,008.77
1.002	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	24.92	sqm	369.76	₹9,212.57
1.003	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	134.4	kg	230.93	₹31,036.99
1.004	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	318.26	kg	187.05	₹59,530.53
1.005	OD139716/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.	37.12	sqm	621.1	₹23,055.23
1.006	OD139796/2026-2027:Providing and fixing on eave face UPVC half cut rainwater gutter pipes (150mm 4kgf/cm2 )with all necessary fittings with clamps at 1m interval including all cost and materials , conveyance , labour charges etc.(12.41.2 modified)	19.2	metre	508.76	₹9,768.19
1.007	50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall	9	metre	248.67	₹2,238.03
1.008	OD137067/2026-2027:Providing and fixing welded wire mesh of 10G of size (25.4mmx25.4mm) to frame	35.75	sqm	704.83	₹25,197.67
1.009	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	1.43	cum	9,235.97	₹13,207.44

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.24 MB

Tendernotice_2.pdf

PDF • 0.24 MB

Tendernotice_3.pdf

PDF • 0.22 MB

Work Item Documents

BOQ_1482757.xls

BOQ • 0.33 MB

NITAW1516.pdf

Tender Documents • 0.03 MB

SBDAW1516.pdf

Tender Documents • 1.69 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Building maintenence
1.001	50.6.3.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete	1.04	cum	8,645.65	₹9,008.77
1.002	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	24.92	sqm	369.76	₹9,212.57
1.003	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	134.4	kg	230.93	₹31,036.99
1.004	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	318.26	kg	187.05	₹59,530.53
1.005	OD139716/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.	37.12	sqm	621.1	₹23,055.23
1.006	OD139796/2026-2027:Providing and fixing on eave face UPVC half cut rainwater gutter pipes (150mm 4kgf/cm2 )with all necessary fittings with clamps at 1m interval including all cost and materials , conveyance , labour charges etc.(12.41.2 modified)	19.2	metre	508.76	₹9,768.19
1.007	50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall	9	metre	248.67	₹2,238.03
1.008	OD137067/2026-2027:Providing and fixing welded wire mesh of 10G of size (25.4mmx25.4mm) to frame	35.75	sqm	704.83	₹25,197.67
1.009	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	1.43	cum	9,235.97	₹13,207.44

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Building maintenence

1.001

50.6.3.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete

1.04

cum

8,645.65

₹9,008.77

1.002

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

24.92

sqm

369.76

₹9,212.57

1.003

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

134.4

230.93

₹31,036.99

1.004

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

318.26

187.05

₹59,530.53

1.005

OD139716/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.

37.12

sqm

621.1

₹23,055.23

1.006

OD139796/2026-2027:Providing and fixing on eave face UPVC half cut rainwater gutter pipes (150mm 4kgf/cm2 )with all necessary fittings with clamps at 1m interval including all cost and materials , conveyance , labour charges etc.(12.41.2 modified)

19.2

metre

508.76

₹9,768.19

1.007

50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall

metre

248.67

₹2,238.03

1.008

OD137067/2026-2027:Providing and fixing welded wire mesh of 10G of size (25.4mmx25.4mm) to frame

35.75

sqm

704.83

₹25,197.67

1.009

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

1.43

cum

9,235.97

₹13,207.44