TOKEN NO. GE/K-24/2024-25 - SPL REPAIR TO BLDG NO. T-28 OF 13 JAK RIF, T-25 OF 43 FD REGT AND T-46 OF 5/5 GR AND CONSTR OF ONE MAIN GATE WITH WICKET GATE OF 308 FD HOSP AT DRASS STN UNDER GE KARGIL (2ND CALL)

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed.

Dismantling of timber scantling fillets, rails, posts rafters, purlins etc under 40 Sqcm, in any position as in unframed work, complete all as specified and directed by Engr-in-Charge.

S & F second clas soft wood fillets square or rectangular in section sectional area exceeding 13 sq cm and n exc 25 sq cm as in scantling secured with nails or brads complete all as specified and directed.

S & F 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in walls complete all as specified and directed.

S & F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in ceiling or sloping portion complete all as specified and directed.

S&F second class softwood moulding as in cornices, picture rails and the like sectional area not exceeding 6 Sqcm fixed with nails complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for laminated wooden flooring 8mm thick size 193mm x 1214mm of High density hard wood fibre board (HDF) with highly anti abrasive protective overlay and melamine impregnated decorative film with interlocking system, laid over 2mm thick foam with suitable arrangement including dismantling of existing old one complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples including etc complete all as specified.

M&L for preparing previously untreated steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of redoxide primer including preparation of surface.

M&L for preparing old wooden surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparing old steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Demolition of concrete of any description and in any position and removal of rocks/debris to a distance not exc 50 mtrs and depositing where directed at a level n exc. 1.5 m above the starting point.

M & L for 75 mm thick plain cement concrete 1:3:6. type C-2 (using 40mm graded aggregate) as in plinth protection and subbase to floors complete all as specified and directed.

M & L for 25 mm thick plain cement concrete 1:2:4. type B-0 (using 12.5 mm graded aggregate) as subbase to floor tiles complete all as specified and directed.

Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and directed by Engr-in-Charge.

M & L for Joint free Non-skid coloured ceramic tiles, 7 to 8mm thick, area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed in CM 1:4, complete all as specified.

M&L Joint free Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 and n.exc 0.38 Sqm in floors over 15mm thick screed bed in cement mortar 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tile all as specified and as directed.

M & L for Coloured Glazed ceramic tiles of size 300x450x7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:3), complete all as specified and directed

M & L for coloured chequered cement concrete tiles 300x300x25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including 20 thick screed bed in CM ( 1:4) complete all as specified & directed

Supply & Fixing in repair one piece EWC China ware with soft closing seat cover and mounted flushing cistern of size 620x370x670 mm white in colour complete all as specified and directed by Eng-in -charge.

Demolition of RCC of any description and in any position not otherwise specifically provided complete.

M&L RCC type B-1, (1:2:4) using 20 mm graded crushed stone aggregate as slabs supported on walls, beams & columns in floors, roofs, landings, balconies and in shelves and the like complete all as specified.

S&F mild steel TMT bars 10mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping etc and binding with mild steel rie (annealed) not less than 0.9 mm dia or securing with clips.

Use & waste Form work to soffits of suspended slabs, such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick with rough finished flat surfaces of concrete, complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, complete all as specified and directed by Engineer-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror/prepolish polishing complete incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L PCC type B1 1:2:4 (20mm graded aggregate) as in coping, complete all as specified and as directed by Engr-in-Charge.

M&L for 18 to 20 mm thick Granite work (table rubbed and polished) Black colour to shelves, counter slabs & skirting etc. over and including 15mm thick screed/rendering in CM (1:4) and pointing with white cement (mixed with suitable colour) (1:2)using marble dust with admixture of pigment to match with shade of granite including moulding edges of granite, complete all as specified and as directed by Engr-in-charge.

S&F in repair for vitreous china wash basin white counter type size 570x450 fixed on granite slab including of fixing of waste pipe, CP coupling complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair 20 mm Stop valve/angle cock, fancy type, chromium plated with long high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed.

Supply & fixing in repair 20 mm Cast copper alloy, Chromium Plated Bib tap fancy type with crutch or butterfly handle, screwed for iron pipe or for brass pipe of for ferrule and fixed.

Supply & fixing in repair 450 mm long PVC connection 15mm bore with PTMT nuts complete all as specified and directed.

Supply & fixing in repair CP health faucet with 1 meter flexible hose and stand all as specified and as directed by Engr-in-Charge.

Supply & fixing in repair 20 mm bore Shawn neck Pillar taps cast copper alloy, with capstain head, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed.

Taking up or down steel water tubing/PPR of 20 mm dia bore all as specified and as directed.

Taking up or down steel water tubing/PPR of 25 mm dia bore all as specified and as directed.

M&L for 20 mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

M&L for 25 mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.

S&F in repair soap dish brass chromium plated fixed to wall with brass chromium plated screw complete all as specified and as directed.

S&F of corner glass shelf 12" complete all as specified.

S&F in repairs stainless steel curtain rod of dia 20-25 mm with finials complete all as specified and directed by Engr-in-charge.

S& F in repairs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) and providing all necessary fittings for connecting with pipe line, including lid cover.

S& F in repairs 25 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

Demolition of precast concrete articles and precast concrete block walling including all quoins, arches, pillars, etc built in cement mortar of any description not other specifically provided for etc complete all as specified.

M&L for Precast cement concrete type C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L rendering 15mm thick cement plaster in cement mortor (1:4) finished even & fair without using extra cement on brick/concrete surfaces.

M&L rendering 15mm thick cement plaster in cement mortar (1:6) finished even & smooth without using extra cement on brick/concrete surfaces.

M&L for two coats of oil bound distemper on newly plastered surfaces of walls over a coat of 1 mm thick wall care puttyi ncluding preparation of surfaces.

M&L for two coats of cement based paint on newly plastered surfaces of walls over a coat of primer including preparation of surfaces.

M&L for applying two coats of cement based paint on old plastered surfaces of walls including preparation of surfaces.

S&F in repair PVC floor trap size 110 mm dia outlet with grating including connection to waste pipe with cement joint including taking down existing trap complete all as specified and as directed

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with adhesive joint laid in trenches or in floor including taking down existing unserviceable pipe complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site all as specified and directed

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames).

M & L for second class softwood (KAIL), plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge.

S & F second class softwood (KAIL) 35 mm thick plain framed panelled shutter(any number of panels)with panels of timber flat on both sides (feather edge), or of veneered particles board medium density wood particle board with commerical face veneers and fitted to chowkhat complete all as specified.

S & F second class softwood (KAIL) 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. complete all as specified.

M&L for preparing new wood surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and directed.

S&F mild steel 100 mm long Butt hinges medium weight,cold rolled all as specified with galvanised mild steel screws complete.

S&F mild steel 75 mm long Butt hinges medium weight,cold rolled all as specified with galvanised mild steel screws complete.

S&F Aluminium anodised barrel tower bolts, 75 mm long complete.

S&F anodised aluminium barrel tower bolt extruded sections 100 mm size complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts, 150 mm long complete.

S&F Aluminium anodised handles, cast type anodised 100 mm long complete.

S&F 150mm long, Aluminium handles, cast type,anodised complete all as specified and directed.

S&F Aluminium anodised handles, cast type anodised 125 mm long complete.

S&F 300 mm long Aliminium anodised sliding door bolts with hasp,staple (bolt type) ISI market stove and fixed complete all as specified and directed.

S&F in repair for four hooks peg set complete all as specified and directed by Engr-in-charge.

S&F in repairs anodised aluminium alloy curtain rod of dia 20-25 mm complete all as specified and directed by Engr-in-charge.

Suface dressing n.exc 15cm deep in hard/dence soil.

Excavating in trenches n exc 1.5 m in depth for foundation, & n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in hard / dense soil

M&L for cement concrete 1:4:8 type D2(using 40mm graded stone aggreagte) as in foundation filling, sub base and mass concrete complete all a specified

M & L mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified

Form work to sides of concrete fdn footing base of columns and raft beams sides and soffits (if any) of fdn and plinth beams and similar wk vertical or to batter for rough finished surfaces complete all as specified

Form work to sides of pillars, post, struts, piers, columns ans stanchions in rough finished surfaces Square, rectangular or polygonal complete all as specified.

M&L for reinforcement cement concrete (nominal mix) type A1 (1:1 1/2:3) (using 20mm graded crushed stone aggregate) in foundation , including rafts, footing, foundation beams, plinth beams, bases for coloums etc.complete all as specified and directed by Engr-in-Charge.

M&L for reinforcement cement concrete (nominal mix) type A1 (1:1 1/2:3) (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and directed by Engr-in-Charge.

Returning filling incl spreading leveling watering and well ramming in layers not exceeding 25 mm in any type of soil.

Removing excavated material not exc 50m and depositing where directed at a level n. exc. 1.50m above the starting point etc complete all as specified and directed

M&L for 18-20mm 'Z Black' Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using mabble dust with admixture of pigment to match with shade of granite all as specified

S&F Fe-290 (Gde E-165) Framed work as in ornamental door or gates of angle or other section with gusset plates rails, braces etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fiting (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete.

S&F 1.60mm thk mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screw, clouts nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turnning up, mitred angle etc as required complete all as specified.

Taking down carefully copper or aluminium point wiring (light, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.

M&L for Point wiring for light/fan/bell with FRLS cable of 1.5sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2mm thick PVC casing caping with all accessories and 1.5sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS sunken box with 3mm thick pre laminated hylum sheet/PVC box flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed for one light point or bell/buzzer point controlled by one switch.

All as per Srl item No 94.00 here in before but using cable size 2.5 Sqmm (phase,neutral and earth) for one 3 pin socket outlet 5 Amps independent board.

All as per Srl item No 94.00 here in before but using cable size 2.5 Sqmm (phase,neutral and earth) for one 3 pin socket outlet 15 Amps independent board.

S & F Switch piano flush type 5 Amps, single pole one way.

S & F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type.

S & F Switch socket combination 2 in 1, 5 and 15 Amps flush type.

M&L for point wring for one light/ceiling fan/Exhaust Fan controlled by one switch with 1.5 sqmm (nominal area) PVC insulated (With standard colour coding red for phase and black for neutral) unsheathed multi stranded copper conductor cable FRLS conforming to IS-694 in and including concealed/surface rigid non metallic PVC conduit medium duty 20 mm dia ISI marked, including suitable PVC sunken boxes,modular frame and cover plate for fixing of modular switches as per required point in that board, flush to surface for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated ( With standard colour coding Green for earth wire) unsheathed 1.5 sqmm copper conductor cable FRLS conforming to IS-694 connected to common earth dooly complete including necessary arrangements in wall wooden panelling and then making good the same in CM 1:3 complete all as specified and directed.

All as per Srl item No 100.00 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 5 Amps independent board.

All as per Srl item No 100.00 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board.

Supply and fixing modular switch single pole one way 6 Amps 1 module complete all as specified and directed

Supply and fixing modular switch single pole one way 16 Amps 1 module complete all as specified and directed

Supply and fixing modular socket 6 amp-2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing modular socket 6 A/16amp-2/3 pin combined 2 module all as specified and directed.

Supply and fix Modular Bell push 6A 1 module complete all as specified and directed.

S & F Electronic Ding Dong Bell, AC 240 volts single pole, complete all as specified.

Supply and fixing in LED 1x18 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & F in Ceiling rose on PVC Square Block surface bakelite 65x50mm, two to three terminals.

S&f Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings

Supply and fixing LED bulb 12 watt, 230 volts

Supply and fixing in replacement LED luminarie 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete 6000K/3000K with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S & F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 12 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.

S & F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.

Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 40 to 63 Amp in the MCB DB complete with connection testing and commissioning.

Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing and commissioning.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, not exceeding 10 sqm on plan and not exceeding 1.5Mtr in depth & getting out of soft/lose soil for taking out cable & laying of cable complete all as specified and directed.

Supply and laying double wall corrugated HDPE (DWC) pipe of size DN 75,pressure rating SN-8, in trenches for protection of cable complete all as specified and directed.

M & L for LT UG cable 2 core x 10 sq mm 1100 Volts grade XLPE insulated , armored, heavy duty with aluminium conductor laid in trenches or fixed to walls/ poles or passing through pipes with and including,cable gland lugs/ thimbles/ ferrules including connecting, testing and commissioning complete for the following sizes including taking down existing LT UG cable of any size from site all as specified and as directed. Notes: (a) Excavation,RFR and protection pipe etc. Shall be measured and paid separately under relevant item of schedule

M & L LT UG cable 2 core x 16 sq mm 1100 Volts grade XLPE insulated , armored, heavy duty with aluminium conductor laid in trenches or fixed to walls/ poles or passing through pipes with and including,cable gland lugs/ thimbles/ ferrules including connecting, testing and commissioning complete for the following sizes including taking down existing LT UG cable of any size at site all as specified and as directed. Notes: (a) Excavation,RFR and protection pipe etc. Shall be measured and paid separately under relevant item of schedule

Supply and fixing GI tubing light grade 40 mm bore as in cable protection fixed to poles/walls or laid in trenches/under road crossing etc. all as specified and as directed.

Supply and fixing in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm

S&F in replacement LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connecting up three core flexible copper conductor cable of suitable size.

S & F in replacement of LED Flood light fitting 70 watt 5000 k green/natural white, IP>66 ,grey powder coated die cast aluminium housing, inbuilt energy efficent surge protected electronic driver, with all connected accessories all as specified and directed.

M&L for submain wiring comprising single core ,2 Runs of 6.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including min 25mm dia. PVC conduit/ PVC Casing Caping ISI Marked(heavy duty) and its fittings on surface/recessed complete including provision of 1X6.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS complete all as specified and directed by Engr-in-Charge. (Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

Dismantling and M&L for Earthing complete with galvanised steel earth plate electrode of size 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to and including GI iron wire of size 4 mm dia by means of GI bolts, nuts, check nuts and washers, protected by 15mm bore GI light grade ISI marked pipe upto and including test points. Earth plate shall be surrounded by alternate layer 15cm thick of charcoal or coke and common salt all around bottom and top , 20mm bore GI medium grade ISI marked pipe for watering and including funnel,wire mesh,PCC chamber pit made with PCC(1:3:6) type C-1(using 20mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50M, CI pit cover duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No.3 of SSR 2009 (Part-I) and all as directed. Note:- (i) Protection pipe and earthing strip upto test point from top of the earth plate and further upto the body of electrical equipment shall be included in the unit rate of this item. (ii) Earth testing arrangement should be done by contractor as per direction of Engr-in-Charge.

M&L for submain wiring comprising single core, 2 Runs of 1.5 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including min 25mm dia. PVC conduit ISI Marked(heavy duty) and its fittings on recessed complete including provision of 1X1.5 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS complete all as specified and directed by Engr-In-charge. (Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

S&F RUBY LED POST TOP, IP 65, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Clear Cover offers bright illumination for different applications.Suitable for pole dia Ø 50 mm, Make: Havells Cat part no. RUBYMINIPT15WLED757PSYMTOPC or equivalent in Bajaj/Crompton/Surya, all as specified and directed by Engr-in-charge.

S & F Sheet metal enclosure for DB's single door, single pole and neutral, 240V, 2 way including blanking plates where required, complete all as specified and directed.

Supply and fixing 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 32 Amp in the MCB DB complete with connection testing and commissioning.all as specified and directed by Engr-in-charge.

S&F 1100 volts grade heavy duty 6 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections including GI tubing light grade 25 mm bore as in cable protection fixed to laid in trenches/under road crossing etc. all as specified and as directed.

Supply and Fix GI tubing Medium grade 50 mm bore for LED Post Top light fixing on wall. all as specified and as directed.

Note : Deduction for amount of Rs. 62,447.75 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.

M/S BHAT ENGINEERS (BID ID -3139597)

SUMEET TRADING CORPORATION (BID ID -3147803)

M/S TRADE LINK (BID ID -3147773)

SAMEER CONSTRUCTIONS (BID ID -3141311)

M/S ALI MOHD AND SONS (BID ID -3141395)

Ashfaq Construction Company (BID ID -3147567)