Setting up of Three Star Beach Resort at Muzhuppilangad Kannur Hardscape and Landscape works and the construction of the Main gate and car porch

Amount

Hardscape

Excavating, supplying and filling of local earth (including royalty) by mechanical transport for all lead and lift including ramming and watering of the earth in layers not exceeding 20 cm in open yard, trenches, plinth, sides of foundation etc. complete as directed by Engineer in charge.

Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge

Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)

Painting runway/ taxi track /apron making with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in- Charge, i/c cleaning the surface of all dirt, scales, oil grease and other foreign material etc. and lining out complete.New work ( Two or more coats)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Supply & Fixing of Bangalore Stone 120 x 60 cm (Box cut) with Natural grass around main Block area of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M- 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge

Supply & Fixing of Bangalore Stone 15 x 60 cm (Box cut) with Natural grass infront of main Block area of approved size, design & shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge

Supply & Fixing of Bangalore Stone 60 x 60 cm (Box cut) with Natural grass around the Cottage of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Supply & Fixing of Bangalore Stone V cut for Internal Pathways of Cottage area of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Supply & Laying of River washed pebbles

Landscaping

Supplying and fixing of Kentia Palm as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Rhapis multifida finger palm 2ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Spider Lily Red 1ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Malay dwarf veriegated bamboo 3ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Schefflera 1ft height multi color as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Lorapetalum Chinense 1ft height multi color as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Spathiphyllum Peace Lily 1ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Pong-Pong tree 6ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

SSupplying and fixing of Coconut tree dwarf,Sannangi 10ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Phyllostachys Aurea, golden bamboo 10ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Malpegia hedge plant 2ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Agave 1ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Nikotia bonsai 2ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Murraya 2ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Ficus Panda Hedging 2ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Spider Lily 1ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Heliconia 1ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Water Heliconia 2ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Costes Woodsoni 1ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Pentanus1ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Alpina ginger 1ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Alpina Zerumbat 1ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Philodandrum Xanadu1ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Philodandrum Selloum1ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Golden Desmodium 3ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Bottle Brush tree 5ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Div-Div 3ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Areca palm 3ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Chinadoll 3ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Calathea Lutea 2ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Umbrella palm 1ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Lorapetalum chinense 2ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Alocasia jiant 3ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Red palm 8ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Mango tree 6ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Heliconia karibia 2ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Terminalia Mantaly 12ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Ficus big 6ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Bauhinia tree 5ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Birdnest fern 1ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Golden shower tree 6ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Tabebuia Rosea 8ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Lagerstroemia 8ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Crotons dwarf 2ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Hosta 1ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Travellers palm 8ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Pearl grass as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Budha belly bamboo 3ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Yucca 4ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Cordiline fruticosa 1ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Bromeliad 2ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Kenna Indica 1ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Calathiya medallion 1ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering Landscape Calathiya

Supplying and fixing of Eugenia liver red hedge plants 3ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering Landscape

Supplying and fixing of Plumeria Alba 6ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Supplying and fixing of Plumeria rubra 3ft height as per the direction of the officer in charge including taking pit,manuring, labour and watering

Main Gate

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately. All work upto plinth levelConcrete of M25 grade with minimum cement content of 330 kg /cum

Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level

Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing galvanized iron plain sheet of thickness 5mm or nearest using self drilling or self tapping screw, excluding the cost of purlins, rafter as per direction of Engineer in charge

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied asper manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. 8 mm thick (mirror polished and machine cut edge)Granite stone of any colour and shade

Car Porch

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately. All work upto plinth levelConcrete of M25 grade with minimum cement content of 330 kg /cum

Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level

Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Supplying and fixing PVC Soffit Ceiling Panels(wooden shade)on frame work using Aluminum profile section of HINDALCO / JINDAL including transportation and installation charge etc as directed by Departmental Engineers.

Providing and fixing of stone-coated roofing sheet with necessary accessories as per the design and as directed by the Engineer in charge. Rate excluding the cost of frameworks

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness

S KRISHNA KUMAR (BID ID -2235776)