Renovation of Tribal Development at Block No.:-8, 2nd & 6th New Sachivalay Dist. Gandhinagar

BILL OF QUANTITIES(%TENDER)

:: BILL OF QUANTITIES::

Name Renovation of Tribal Development at Block No.:-8, 2nd & 6th New Sachivalay Dist. Gandhinagar.

Item No Description of item(with brief specification and reference to book of specifications) Qty Unit Amount

Replaced Old & Unservicable By New Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of following

1 type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white 354 Pt. 485.81

front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat. III

Replaced Old & Unservicable By New Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator mounted

2 and accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting 87 Pt. 674.68

base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III

Replaced Old & Unservicable By New Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

3 socket erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white 41 Pt. 257.55

front plate modules erected on / in wall / ceiling with following type accessories Cat. III

Replaced Old & Unservicable By New Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation directed by Engineer In charge.(1)One No. SP 6 Amp.

(2) One No 5 pin plug Cat.III 86 Ea. 151.50

(3) Two Pin/RJ-11 Telephone Socket [A] For One Gang Cat.III 41 Ea. 160.59

(7) Blank Plate Single Cat.III 60 Ea. 25.25

(9) 16 Amp. SP one way switch Cat.III 38 Ea. 180.79

(10) 6/16Amp. Universal socket Cat.III 38 Ea. 199.98

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch Cat.III 46 Ea. 410.06

Replaced Old & Unservicable By New Providing and erecting ISI mark Medium class RIGID PVC PIPES of

5 following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes 2703 Mtr. 33.33

fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (b) 25 mm

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes. (2) 25 mm

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with

7 ignition free and flame proof confirming BS with necessary end caps Internal and external bend, flat bends, 40 Mtr. 428.24

coupler, tee etc..All necessary accessories and measuring of following sizes (2) 100 mm x 50 mm trunking

Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable trunking of 1.6 mm thick having

with stand point load up to 1.33 Ton & free from seepage of concrete of screed water with all accessories,Junction

8 Box,Joints as required and demanded by engineer-incharge and laying/erecting as per OEM guidelines and as 340 Mtr. 458.54

per instruction of engineer incharge having following size of dimensions and No of compartments (W x D x T) Cat-

III [3] 100mm x 25mm x 1.6 mm with one compartment

Replaced Old & Unservicable By Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following

size (E) in existing pipe (a) 2 wire 1.5 sq. mm

(b) 2 wire 2.5 sq. mm 1272 Mtr. 62.62

Replaced Old & Unservicable By New providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (E) in

existing pipe (a) 2 wire 4 sq. mm

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed.(h) 2.50 Sq.mm 3 core round PVC sheathed

BILL OF QUANTITIES(%TENDER)

Item No Description of item(with brief specification and reference to book of specifications) Qty Unit Amount

(j) 4.00 Sq.mm 3 core round PVC sheathed 80 Mtr. 127.26

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid

12 bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @ 315 Mtr. 62.62

suitable coverage overall sheathed with black PVC insulation.(e) RG-11

Replaced Old & Unservicable By New Supplying & erecting approved make Telephone Cable electrolytic copper

conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or

HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of

conductors & nos.of pairs. With necessary connections.[A] Conductor Size 0.5 mm (a) Unarmoured (2) Two Pairs

((b) Armoured [Jelly Filled] (3) Fifty Pairs 120 Mtr. 467.63

Supplying & erecting approved make LAN cable Cat 6A/Class EA cable shall be constructed of 23 AWG copper

conductors with FEP Plenum (CMP) insulation. The copper conductors shall be twisted in pairs and separated by a

cross-divider. All four pairs shall be surrounded by a nonconductive foil tape and a flame retardant jacket. The foil

tape shall suppress the effects of alien crosstalk.Rate approved

Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved with

krone strips (c) Suitable for 50 pair

Replaced Old & Unservicable By New Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC / Metallic concealed/open box with single

mounting base frame covered with textured/metallic /white front plate,modules erected with necessary connections

16 as directed 104 Ea. 1133.22

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III

17 Decorative call bell Ting-tong box type 250 volts complete erected 42 Ea. 71.71

SITC of access outlet box for under floor cable management and distributor of power data and communication of

power data and communicaiton able AOB preovide easy acess to power and data communication from the floor

18 availablity of lid with 8mm & 20mm recess with superior load bearing perfomance of up to 2.5tonn on the trap 65 Ea. 4291.79

these floor boxes are adaptable to any floor with adjusting stainless streel leveling screw 150*150*65-80mm rec

8mm-120 GSM base

Replaced Old & Unservicable By New Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more than

19 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % 98 Ea. 427.23

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Square/

Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV Cat-lll

(iv) 22-24 watts, Surge-2 KV Cat-lll 134 Ea. 758.51

SITC `17` mm to 22mm surface type alumium profile with presairmatic fiber cable with self adasive led strip 340 Ea. 1610.95

(I) Adjustable spot light with COB led having aluminium reflector of following wattage (i) 8 Watts Cat-lll 42 Ea. 859.51

Replaced Old & Unservicable By New providing and erecting Miniature circuit breaker single pole 6A to 25A

20 suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. 108 Ea. 112.11

confirming to IS 8828/1996 with ISI Mark Cat.III

Replaced Old & Unservicable By New Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B

21 curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (b)40 Amp. 3 Ea. 638.32

Replaced Old & Unservicable By New Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

22 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (c)63 Amp. 3 Ea. 737.30

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

23 appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three 6 Ea. 2913.85

phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double

Replaced Old & Unservicable By New providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single

phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating erected as directed (ii) 40Amps. DP Cat.III

BILL OF QUANTITIES(%TENDER)

Item No Description of item(with brief specification and reference to book of specifications) Qty Unit Amount

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be

25 laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of 210 Mtr. 676.70

cables.(A) 4 core 10 Sq. mm

(B) 4 core 16 Sq. mm 224 Mtr. 987.78

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for following size of cables.(C) 2 to 4 core 10 Sq. mm

(D) 2 to 4 core 16 Sq. mm 6 Ea. 47.47

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high

27 pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (B) 24 Ea. 10.10

Replaced Old & Unservicable By New Providing and erecting Approved make Ceiling fan with double ball bearing

28 ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or clamp 87 Ea. 1596.81

with earthing. [Make shall be approved by Engineer in charge]

Replaced Old & Unservicable By New Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

down rod erected duly painted for fan complete with proper insulation without leakage and earthing.

Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected with necessary hook of

10 mm M.S. Round Bar.

Replaced Old & Unservicable By New Supplying & erecting approved make low noise decorative exhaust fan

having square frame ABS body with inbuilt lowers & square frame.250mm with 1350 RPM Cat.II

SITC of Face Plate - Dual (Keystone Jack,square) [Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

SITC of Jack Cat 6 Keystone UTP [Approved by Competent Authority i.e. not Below the rank of Executive

Providing and erecting Inverter based approved make split air-conditioning unit consisting of condensing unit with

variable speed fan motor, inverter type hermetically sealed rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with its accessories by means of extra supplied proper

insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas charging and 15A plug

top & Remote Control & MS Stand) with necessary core cutting.(2)For ISEER Range (KWH/KWH)(4.0 to 4.49) (B)

for 1.5 ton capacity- Premium Cat.

(C) for 1.7 to 2 ton capacity-Premium Cat. 13 Ea. 72381.65

Providing and erecting approved make Cassette type split air-conditioning unit consisting of condensing unit with

fan motor, hermetically sealed scroll/rotary compressor with accessories etc. duly connected separately erected

evaporating unit and blower motor with its accessories by Eco friendly Green gas charging & Internal copper wiring

& Remote control ( 3 star and above of current year) with necessary core cutting. (C) for 2 ton capacity

Supplying and erecting insulated pair of soft copper tubing open or concealed including power and control

cable,necessary PVC drain pipes for Split AC machine up to 4 TR capacity

37 Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber insulation.(E) 19 mm dia. 82 Rmt 67.67

carry out RCC Core cutting- up to 100 mm dia./300mm thick Wall/beam/slab with providing PVC pipe of 3 mm thick

inside and necessary finishing on both ends of wall .

39 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 15 Kg 794.87

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting

Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia

of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber and heavy duty cover. (A)(approved

make OEM has to submit test certificate including value of earth resistance of installation duly stamped and signed

by agency and officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted by

Agency. (c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

BILL OF QUANTITIES(%TENDER)

Item No Description of item(with brief specification and reference to book of specifications) Qty Unit Amount

Dismantling-Packaging & Re-installation of

Following Items 1. Speaker 30 Watt- 10 Qty. 2. Amplifier- 1 Qty.

3. DSP- 1 Qty. 4. Wireless handheld Mic- 2 Qty. 5. Lepel Mic- 16. Chairman Unit- 1 Qty. 7. Digital Delegate Unit-

8. Controller - 1 Qty. 9. Presentation System - 1 Qty.

10- Pop up Box- 2 Qty.11. HDMI CABLE 5 MTR- 1 Qty.

12. VGA Cable 3 MTR- 2 Qty. 13. XLR Male-Female Connector- 2 Set. 14. Projector Screen - 1 Qty.15. Projector

Mount- 1 Qty. (As per RA )

Fifty lakh seventeen thousand one hundred twenty-five point eight two

I/ We am/are willing to carry out the work at_________% above / below percent (should be written in figure & words) of the estimated mentioned above. Amount of my / our tender works

Estimated amount put to Estimated amount put to

(a) I/we hereby declare that we have visited the site and fully exquisite myself/ourselves with the Local situation regarding materials labour and other factors pertaining to work before

submitting Tender.

(b) I/we hereby declare that we have carefully studies the conditions of contracts. Detailed Specification and other tender document of this work and agree to execute the same

1 If required and found necessary material to be used for this work and brought at site will have to sent to Govt.approved laboratory. The qualified agency/ manufacturer of

Particular product under testing will have to pay/ bear necessary charges.

2 All works shall be carried out as per public works Department hand book and other Specification.

3 Rates are inclusive of 1% Labour cess in tender amount so 1% of total amount of bill will be deducted from the bill.

3 Rates are inclusive of 1% Labour cess in tender amount so 1% of total amount of bill will be deducted from the bill.

4 The material to be used in this work must be as per instruction by under liason of Engg. In charge.The agency will have to agree to carried out the work as per brand/make

demand of concern deptt.

5 Contractor must have registration in D & above class registered under elect. (R & B) division.

Sign of Dy. Exe. Engineer Exe. Engineer

ctor Sachivalay Complex Elect. Sub-Div.No.-2 Sachivalay Complex Elect. Div

R. & B. Deptt. Gandhinagar R. & B. Deptt. Gandhinagar