Painting of building and steel structures at Ammonium Sulphate plant in FACT, Udyogamandal.

Painting of building and steel structures at Ammonium Sulphate plant in FACT, Udyogamandal.

Removing by rooting out the plants of girth up to 100 mm, growing over the roof and side walls of various buildings, structures and other places without damaging the existing structures.

Dismantling carefully the plastering/ tile work in wall including stacking material within 50 metres lead.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge - With cement mortar 1:4 (1 cement : 4 fine sand)

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

Cleaning and applying priming coat with water thinnable cement primer of approved brand and manufacture, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre on all surface.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat - of exterior grade.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat.

Cleaning the structural / other surface neatly at all heights, manually with suitable tools or with high pressure water jet spray (using suitable machanical means), and scraping if required, to remove the whole accumulated dust, rust, dirt etc. as per departmental instructions.

Applying one coat of surface tolerant self priming high build epoxy primer "PROTECTOMASTIC" of Berger paints or equivalent approved quality of epoxy priming coat with minimum volume of solid of 80% including cost of material,scaffolding charges,labour charges and all other incidential charges etc at all heights. complete as per departmental instructions at site.

Applying one coat of finished paint with Acrylic Aliphatic Polyurathane coating , "BR PU HI GLOSS ENAMEL" of Berger paints or equivalent approved quality of finish paint with minimum volume of solid of 52% after cleaning the surface including cost of material,scaffolding charges,labour charges and all other incidential charges etc at all heights. complete as per departmental instructions at site.

Applying anti corrosive coatings to the masonry surfaces at all heights consisting of 2 coats of "Pro Epishield Floor Sealer" & One coat with "EPILUX 950 SUPER HIBUILD" of Berger or any other equivalent of approved quality and colour after cleaning the surface thoroughly by removing all loose particles ,dust etc. including cost of all materials labour charges scaffolding, removal of waste materials etc. It should ensure that the entire surface is covered under each coat. Allow sufficient drying period in between coats as recommended by the manufacturer.

T K SALIM (BID ID -3202868)

SANUSH TH (BID ID -3204154)

MOHAMMED SHAREEF T.S (BID ID -3202944)

MINI ENTERPRISES (BID ID -3206457)