Karnataka

Active

Works

Roads

Construction of BT Road From Maski-Mudgal Main Road to Mydaral Tanda in Maski Constituency in Raichur Dist (SCP)

Karnataka Rural Road Development Agency

KRRDA Division Office Raichur | RAICHUR, Karnataka

Amount: ₹80.3 LCloses: 29 Sept 20262d left

Timeline

Published17 Sept 2026
Pre-Bid Meeting22 Sept 2026
Closes29 Sept 2026
Bid Opening30 Sept 2026

Tender Value

₹80.3 L

EMD Value

₹1.6 L

Closing Date

29 Sept 2026, 5:00 pm2d left

Tender Inviting Authority

Office Inviting Bids

Karnataka Rural Road Development Agency

Contact Person

Annapurna TA

Office Number

Mobile Number

Work Description

Construction of BT Road From Maski-Mudgal Main Road to Mydaral Tanda in Maski Constituency in Raichur Dist (SCP)

Tender Information

Tender ID

KRRDA/2026-27/RD/WORK_INDENT580

Reference Number

KRRDA/2026-27/RD/WORK_INDENT580

Tender Type

Open

Product Category

Roads

Form of Contract

Two Tender Document System(Two Cover)

Location

KRRDA Division Office Raichur

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredAnnual Turnover Certificate from 2021-22 to 2025-26

RequiredClass 3 and above contractor PWD license

RequiredWork Done Certificate from 2021-22 to 2025-26

RequiredQuantities wise work done certificate from 2021-22 to 2025-26

RequiredLine of Credit Unconditional

RequiredAs per KW-3 bid document

RequiredITRs, Profit & Loss Balance sheets

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government / Government of India /Union Territory.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & MaxRs.7500/-) soon after contract has been issued to bidder.

Royalty Charges will be Deducted in every bill of contract as per rules

Conditional tenders will not be accepted.

Financial year will be reckoned as the period between first day of April and thirty first day of March of succeeding year(Both Days inclusive)

As per Karnataka State Government Order LD/300/LET /2006 Bangalore dated 01.01.2007 and Government Letter NoPW/134/BMS/2007 dated27.07.2007, a sum Amounting to 1% of the bill amount will be deducted towards constructionslabour welfare fund.

The Tenderer shall scan the Original Ownership Documents/ Lease/ Hire commitment Agreement for the Machinery and attach the scanned file to the Bid. The Original Documents shall be produced at the time of opening of technical Bids for physical verification

The Employer reserves the right to Reject any or all Tenders without assigning any reason

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2: Instructions to Tenderers (ITT), will only be considered for evaluation.

All materials required for the work, shall be procured by the Tenderer himself and should be got tested by the quality control authorities at his own cost before use on work

The KPWD Code, KTTP Act/Rules, Delegation of Powers and other Government Orders issued by the Government from time to time will apply

Tenderer shall obtain the work done certificate in the prescribed Format from the competent authority not below the rank of Executive Engineer (District Level Officer) and scan the original certificates and attach the scanned file to the tender. The original certificate shall be produced at the time of opening of Technical Bids for physical verification.

The Item Rates quoted shall include cost of Royalty charges on constructive materials & other taxes as per the rates prevailing Government Orders at the time of Agreement and including cost and conveyance of all materials, curing, loading and unloading with all leads and lifts, labour, hire charges of machinery & equipment etc., complete and all incidental charges. All the items shall be executed as directed by the Engineer- in-charge of the work.

The tenderer shall note that the scanned Documents can also be uploaded in the tasks created under Document/Evidence Required from the Bidder.

WHEN THE CONTRACT MANAGEMENT BECOMES OPERATIONAL THE BIDDER SHALL PAY AN AMOUNT EQUIVALENT TOTHE TENDER PROCESSING FEE

The contractor shall furnish an affidavit stating that the exiting commitments, Furnished are true & if found false action may be taken as per Rules.

Any dispute or difference or claim arising out of, or in connection with, or relating to the present contract or the breach, termination or invalidity thereof shall be referred and settled under the Arbitration Centre - Karnataka (Domestic &International) Rules 2012, by one or more arbitrators appointed in accordance with its rules

Defect and liability period 1 (One) years from date of completion of this work

Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2025-26 in the Technical Qualification Criteria mentioned in the next section.

The period for completion of work is 03 (THREE) months including the monsoon season.

Qualification and experience of the key technical and Management personnel in permanent employment with the Tenderer and those that are proposed to be deployed on this work, if work is awarded.

Name, Address, telephone No., Fax No., and email ID of the Tenderers Bankers

The proposed methodology and program of construction, backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion.

Latest Income Tax Clearance Certificate

Assessed Tender Capacity shall be more than the Tendered Amount

Information on works for which Tenders have been submitted and works which are yet

Report on the financial standing of the tenderer, such as profit and loss statements and auditors report for the last five years

If any damage (living / non-living) Occurs during construction of work contractor should pay the expenditure

Contractor will be dis-qualified if, Made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements.

Contractor will be dis-qualified if, Record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history, or financial failures etc.

Contractor will be dis-qualified and block listed if, Participated in the previous Tender for the same work and had quoted unreason ably high tender prices and could not furnish rational justification.

The additional Performance Security for unbalanced bids of Contract is repaid to the Contractor when the construction work is complete.

Security deposit deducted from each bill will be returned to the contractor after the completion of work, and Performance Security Deposit (Submitted during LOA) will be return after the DLP period i.e., one year after completion.

Conditional LOC (Line of Credit) not allowed

Technical Criteria

General

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Mandating satisfactory completion as a prime contractor for at least one similar work amounting Rs.40.78 lakhs ( to an extent of 50% of the cost of the work, for all works consisting upto and Rs. 100.00 Lakh.) from 2021-22 to 2025-26

Work Done Certificate

Executed in any one year the following minimum quantities of work as per bid document. i.e,(80% of peak rate of construction) Earthwork, Embankment & Subgrade:283.80 Cum, GSB:74.40 Cum, WBM: 238.35 Cum, BT/CGPC:10155 Sqm, PCC/RCC: 410.86 Cum, & Steel:0.52MT work done certificates from 2021-22 to 2025-26

Work Done Certificate

Capabilities of Vendor

Liquid assets and /or availability of credit facilities of no less than Rs.24.47 Lakhs. (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. (usually the equivalent of the estimated cash flow for three months in the peak construction period)

Line of Credit

Total value of civil engineering works executed and payments received in the last five years (year-wise) 2021-22 to 2025-26

Others -- Total value of civil engineering works executed and payments received in the last five years (year-wise) 2021-22 to 2025-26

Financial Status

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract Rs.81.55 Lakhs (usually not less than the estimated cost under this contract) from 2021-22 to 2025-26

Audited CA Certificate of Annual Turnover

ITRs and Balance sheets for 2021-22 to 2025-26

ITR Filed Copy (Mentioning PAN)

Others

Total value of civil engineering works executed and payments received in the last five years (year-wise)

Others -- Total value of civil engineering works executed and payments received in the last five years (year-wise)

Class 3 and above contractor PWD license to submit

PWD Registration Certificate (Class I/II/III/IV)

Fee & Financial Details

Tender Fee Amount

₹2,010

EMD Fee Amount

₹1.6 L

Important Dates

Last Activity

17 Sept 2026

Published

17 Sept 2026

Bid Opening

30 Sept 2026

Download Ends

28 Sept 2026

Pre-Bid Meeting

22 Sept 2026

BOQ Preview

•

Constructionof BT Road From Maski-Mudgal Main Road to Mydaral Tanda in Maski Constituency in Raichur Dist (SCP)

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

•

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by mechanical means using a hydraulic excavator within all lifts and lead

•

Scarifying Existing Granular Surface to a depth of 50 mm by Mechnical Means using Hydraulic excavator.

•

Construction of Subgrade and Earthen Shoulders with approved materials obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to m...

•

Construction of Granular Sub-base of required grading as per design mixing in a mechanical Mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on p...

•

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound m specification including spreading in uniform thickness, hand packing, rolling with vibratory roller in s...

•

Providing & applying prime coat with SS 1 Bitumen Emulsion on prepared surface of granular base including cleaning of Road surface and spraying primer at the rate of 0.70 Kg/ Sqm using mechanical mean...

•

Providing and applying tack coat with RS1 Bituminous Emulsion using wmulsion pressure distributor at the rate of 0.25 kg/sqmtr on the prepared bituminous surfcae cleaned with mechanical broom

•

Providing laying and rolling of close graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type A) or 13.2 mm to 0.09 mm (Type B) aggregates using VG 30 Bitumen to requi...

•

Providing and Constructing un-reinforced Plain Cement Concrete Pavement , thicknes as per design , over a prepared sub base , with 43 grade cement or any other type as per Clause 1501.2.2 M20 Grade , ...

•

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms/sqmtr area thickness of 2.5 mm is exclusive of surface applied glass beads as per...

•

Providing and ercting direction and place identification retro-reflectorised sign as per IRC: 67-2012 made of high intensity grade sheeting vide clauses 801.3 fixed over aluminium sheeting 2 mm thick ...

•

Providing and fixing board displaying information, such

•

as 'Name of work, Tender cost, Name of Contractor, Work

•

completion and liability period etc', having rectangular shape

•

of 1.20m x 0.90m size mad...

•

Earth work excavation for FOUNDATION by Mechnaical means for all works & depth upto 3.00 mtr as per drawing and technical specifications,including setting out,shoring , strutting , barricading,caution...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

•

Providing and Laying in position plain cement concrete for levelling course for all works in Foundation . The granite/trap/basalt crushed graded coarse aggregates and fine aggergates as per relevent I...

•

Providing and Laying in position Reinforced cement concrete for all Sub structures of building,Irrigation works,SubStructure works of bridges,Drain works & other allied parallel works from 0.50 to 3.5...

•

Supplying , fitting & placing TMT Fe 550 / 550 D Steel Reinforcement including cost of all materials,machinery , labour,cleaning , straightening,cutting , bending , hooking , lapping / welding , tying...

•

Providing, and laying reinforced cement concrete pipe NP3 for culverts on First class bedding of granular material in Single row including fixing collar with cement mortar 1: 2 but excluding excavatio...

•

Backfilling behind abutment , wing wall and return wall complete including compaction as per drawings & technical specification.

•

Providing and laying boulder apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical Specifications.

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw3 Maski-Mudgal.pdf

Tender Document • 1.04 MB

loc formate.pdf

Others - LOC Format • 0.95 MB

kw3 Maski-Mudgal.doc

Tender Document • 0.55 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

Active

Works

Roads

Construction of BT Road From Maski-Mudgal Main Road to Mydaral Tanda in Maski Constituency in Raichur Dist (SCP)

Karnataka Rural Road Development Agency

KRRDA Division Office Raichur | RAICHUR, Karnataka

Amount: ₹80.3 LCloses: 29 Sept 20262d left

Timeline

Published17 Sept 2026
Pre-Bid Meeting22 Sept 2026
Closes29 Sept 2026
Bid Opening30 Sept 2026