Renovation of Control Room and stores at Hathnikund Barrage

Amount

Providing and fixing vitrified tiles of size 600x600mmof approved make in flooring laid in any pattern as specified over base of 20mm thick white cement slurry mixed with pigment to match the shade to tiles

Scraping , white wash and colour wash

Removing door and windows (wood and steel) with Chowkats by making recesses in walls when the wall is not to be dismantled :- doors

Removing door and windows (wood and steel) with Chowkats by making recesses in walls when the wall is not to be dismantled :- window

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete: - door and window frame of size 114 mm X 50 mm with 35 mm wide double rebate

Commercial hard wood such as holl lock, champ , chikrassyi, and champlash etc.(non-coniferous timber other than teak conforming to I.S. Specification no.1003 kiln seasoned) of doors and windows including iron hold fasts etc. complete fixed in position.

Wire gauze commercial hard wood such as hollock, champ, chikrassy etc. (non-conifer- rous timber other than teak conforming to I.S. specification No. 1003 kiln seasoned) door and window shutters without springs housed in chowkats including chocks, iron hinges and screws, etc., complete fixed in position (excluding the cost of tower bolts, and handles but including the labour for fixing the same) 30 mm thick.

Cement Plaster 12mm thick cement plaster 1:5

Terracing consisting of tiles 22.86 cm × 11.43 cm × 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and another layer of mud morter for laying the tiles, including two coats of bitumen laid hot at 1.65 Kg. per sqm on top of R.C.C. slab including grouting with cement sand morter 1:3 and top surface to be left clean etc.

Preparation of plastered surfaces for oil bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete.

Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work.

Applying pink primer or aluminum priming coat on wood work including preparation of surface, knotting and stopping etc.

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surface to give an even shade.

Painting two coats excluding priming coat with ready-mixed paint for metallic surface in all shades on new steel or iron work

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE LAVATORY SUITES (ANGLE BACK) IN VITREOUS CHINAWARE and all other necessary fittings

Gopal Chand

Vinod Kumar

Ravi Kumar Contractor