Loading…
Loading…
Tender Value
₹2.4 Cr
EMD Value
₹2.4 L
Closing Date
29 Jan 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
Deputy Municipal Commissioner
Construction Of New Community Hall After demolition of Old Community hall at T.P.Scheme no.47, F.P.18 Bhestan Gam South Zone-A (Udhana), Surat. (2nd attempt)
265060
DMC/SZ-A/15/2025-26 WORK NO. 14
Open
Civil Works - Buildings
Surat
3 documents required · 3 mandatory
₹4,248
Commissioner, Surat Municipal Corporation
₹2.4 L
15 Jan 2026
15 Jan 2026
15 Jan 2026
29 Jan 2026
15 Jan 2026
Name of work : Praposed Estimate for Community Hall at F.P.No. 18, T.P. Scheme No. 47 (Bhestan),South Zone-
DESCRIPTION QTY. UNIT AMOUNT
WORK UP TO PLINTH LEVEL
Excavation for foundation includ.sorting out &
1 stacking of useful materials & disposing of the excavated
stuff upto 50 mt. Lead & all lift, watering etc.Comp.
(A) Loose or Soft soil Executed With Mechanised Efforts / Machinaries
SMC SOR-PAGE NO 1 IT NO
Boring holes 3.5 mt.deep in ordinary soil ( for cast in
2 situ piles) & disposal ofthe surplus excavated soil as
directed within a lead of 50 M. For following diameter of
250mm dia 63.00 Rmt 326.84
SMC SOR ITEM NO. 94, PG.NO.
Providing and filling rubbles including hand packing
and filling interstices with quarry spalls behind
abutments and between returns as directed.
SMC SOR , ITEM NO. 22, PG. NO. 3 113.00 C.M. 1064.80
Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6
Crushed stone agg 20m.m Nominal size)&curing comp.
excl. cost of form work in :(a) foundation & Plinth
(A) Foundation 63.00 C.M. 3005.76
(C) Grade Slab 60.00 C.M. 3005.76
SMC SOR, PAGE NO 1 IT NO
Providing & laying cement concrete 1:2:4 (1 cement:2
sand:4 graded stone agg. 20 mm nominal size)& curing
comp. Includ.cost of form work but exclu. Cost of
reinforcement for reinforced concrete work in : (A)
Foundation, footing, Base of columns and Mass
(C) Grade slab 60.00 C.M. 3637.34
(SOR SMC Pg No. 9 It No. 95)
Providing, mixing, placing, compacting by machine
vibrator, curing, testing M25 Design mix concrete as
per IS 456:2000 (latest revision) and as per tender
specification in all items including cost of form work and
rendering but excluding cost of reinforcement
(A) foundation, footing, base of columns and mass
SMC SOR, PAGE NO 14 DESIGN MIX M25
Providing, mixing, placing, compacting by machine
vibrator, curing, testing M25 Design mix concrete as
per IS 456:2000 (latest revision) and as per tender
specification in all items including cost of form work and
rendering but excluding cost of reinforcement
DESCRIPTION QTY. UNIT AMOUNT
WORK UP TO PLINTH0.00
(1) Having cross sectional area up to 0.085sq.mt. LEVEL C.M. 12587.74
(2) Having cross sectional area more than 0.085 sqmt &
up to 0.12 sqmt.
(3) Having cross sectional area more than 0.12 sq. mt.
SMC SOR, PAGE NO 14 DESIGN MIX M25
(1)Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 8994.86
(2)Having cros sectional area more than 0.08 sqmt and
upto 0.12 sqmt.
(3) Having cross sectional area more than 0.12 sq. mt .
SMC SOR, PAGE NO 14 DESIGN MIX M25
Providing, mixing, placing, compacting by machine
vibrator, curing, testing M35 Design mix concrete as
per IS 456:2000 (latest revision) and as per tender
specification in all items including cost of form work and
rendering but excluding cost of reinforcement
(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 12849.44
(2) Having cross sectional area more than 0.085 sqmt &
up to 0.12 sqmt.
(3) Having cross sectional area more than 0.12 sq. mt.
SMC SOR, PAGE NO 14 DESIGN MIX M25
(1)Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 9256.56
(2)Having cros sectional area more than 0.08 sqmt and
upto 0.12 sqmt.
(3) Having cross sectional area more than 0.12 sq. mt .
SMC SOR, PAGE NO 14 DESIGN MIX M25
Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6
crushed stone agg. 20 m.m Nominal size)& curing comp.
incl. cost of from work in: wall caps/ copings.
(SOR SMC Pg No. 9 It No. 97) 12.00 C.M. 3982.62
Providing & fixing IS Mark TMT Bar FE 500D
10 reinforcement for R.C.C. work incl. bending, binding &
placing in position etc.comp.
Upto G.L./P.L. 30695.00 Kg. 76.21
SMC SOR, PAGE NO 1 IT NO
Brick work using common burnt clay building bricks
having crushing strength not less than 35 kg./Sq.Cm. in
Cement Mortar 1:6 (1- Cement : 6 -fine sand) (C) Fly
SMC SOR, PAGE NO 2 IT NO 16 118.50 C.M. 4511.97
Filling available excavated earth (excluding rock) in
trenches. plinth, sides of foundations etc. in layers not
12 exceeding 20 cm. in depth consolidating each disposited
layer by ramming and watering.
SMC SOR, PAGE NO 1 IT NO 10 1107.00 C.M. 130.39
Filling in foundation and plinth with murrum or
selected soil in layers of 20cm. thickness including
watering, ramming and consolidating etc. complete.
DESCRIPTION QTY. UNIT AMOUNT
SMC SOR, PAGE NO 1 IT NO 11 WORK UP TO PLINTH LEVEL
Carring out plinth treatment to post construction /
existing structure by spraying chemical solution for
termite control treatment including labour and
material consistment with ISI specification. Using
Chlordene and Chiorpurfiles 20 EC. As per 6131_paret-II
14 Consentration Weight one percent is recommended i.e. 785.00 S.M. 82.89
one litre 20 EC chemical emulsion with 19 liter give 1%
concrentration inclusive of one litre chemical emulsion
appication at the rate of 5 litre chemical / Sqm of surface
is recommended as per IS.
SMC SOR, PAGE NO 12 IT NO
Providing & Applying 20mm. Th. Heavy Roller plaster
on walls or similar surfaces at all floor levels consisting
of 12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3
sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1 cement:
15 1 sand) apply thick cement slurry and apply roller
horizontal as well as vartical ( two times ) up to good
quality and size of grain in elevation as per directed by
engineer incharge.
SMC SOR, PAGE NO 3 IT NO 28 MR 107.00 S.M 324.00
Providing & applying two coats of weather shield
max paint (3 coats may be required in case of darker
colours.) of ICI Dulux or Apex Ultima of Asian Paint
including applying exterior acrylic primer coat as per
manufacturers specification and directions in shade and
colour approved by architects, on exterior surfaces of
the building including scaffolding, preparing the surface,
watering, curing etc. complete and as directed by the
architects and manufacturers. Surface Preparation :
surface is thoroughly clean, dry and free from all loose
16 dirt, chalk, grease, fungi, algae and flaking paint. This can
be achieved by brushing with a wire/ stiff coir brush,
followed by water jetting if required. Fill up all minor
cracks and defects with white cement and sand mixture
in the ratio 1:3. For application on previously painted
wall, previous coatings of paint must be thoroughly
scraped off and Clean the surface thoroughly using wire
brushes. Priming: Apply a liberal coat of exterior acrylic
primer and allow it to dry for 4-5 hours. Application of
putty is not recommended. Minimum 4-6 hours duration
is required between each coat of weather shield max
SMC SOR , COLOR WORK ITEM NO.- 17 MR 107.00 S.M 82.00
TOTAL COST UP TO PLINTH
WORK ABOVE PLINTH
Providing, mixing, placing, compacting by machine
vibrator, curing, testing M25 Design mix concrete as
per IS 456:2000 (latest revision) and as per tender
17 specification in all items including cost of form work and
rendering but excluding cost of reinforcement
(1) Having cross sectional area up to 0.085sq.mt.
Ground Floor 0.00 C.M. 12587.74
Terrace Floor 0.00 C.M. 12627.34
DESCRIPTION QTY. UNIT AMOUNT
(2) Having cross sectional area more than 0.085UP
mt PLINTH LEVEL
.up to 0.12 sqmt.
Ground Floor 0.00 C.M. 11136.62
Terrace Floor 0.00 C.M. 11176.22
(3) Having cross sectional area more than 0.12 sq.mt.
Ground Floor 33.00 C.M. 9190.79
Terrace Floor 11.00 C.M. 9230.39
SC Floor 2.00 C.M. 9269.99
(SOR SMC Pg No. 14 Design Mix M25)
(1) Having cross sectional area upto 0.08 sq.mt.
Ground Floor 0.00 C.M. 8994.86
Terrace Floor 0.00 C.M. 9034.46
(2) Having cros sectional area more than 0.08 sq. mt and upto 0.12 sq.mt.
Ground Floor 0.00 C.M. 8075.85
Terrace Floor 0.00 C.M. 8115.45
(3) Having cross sectional area more than 0.12 sq.mt.
Ground Floor 43.00 C.M. 6999.09
Terrace Floor 5.00 C.M. 7038.69
(SOR SMC Pg No. 14 Design Mix M25)
(2) Slabs having more than 8 Cm & upto 10 Cm
thickness. #REF! 0.00 C.M. 7887.74
(3) Slabs having more than 10 Cm & upto 13 Cm
thickness. Ground Floor ( 1ST SLAB ) 0.00 C.M. 7306.10
(4) Having more than 13 cm. Thickness
Ground Floor ( 1ST SLAB ) 65.00 C.M. 6727.93
SC Floor (2nd Slab) 5.00 C.M. 6767.53
(SOR SMC Pg No. 14 Design Mix M25)
Ground Floor ( 1ST SLAB ) 16.00 C.M. 9419.25
(SOR SMC Pg No. 14 Design Mix M25)
Ground Floor ( 1ST SLAB ) 2.00 C.M. 6913.25
(SOR SMC Pg No. 14 Design Mix M25)
Providing, mixing, placing, compacting by machine
vibrator, curing, testing M35 Design mix concrete as
per IS 456:2000 (latest revision) and as per tender
specification in all items including cost of form work and
rendering but excluding cost of reinforcement
(1) Having cross sectional area up to 0.085sq.mt.
Ground Floor 0.00 C.M. 12849.44
Terrace Floor 0.00 C.M. 12889.04
(2) Having cross sectional area more than 0.085 sq. mt .up to 0.12 sqmt.
Ground Floor 0.00 C.M. 11398.32
Terrace Floor 0.00 C.M. 11437.92
(3) Having cross sectional area more than 0.12 sq.mt.
Ground Floor 31.00 C.M. 9452.49
Terrace Floor 10.00 C.M. 9492.09
DESCRIPTION QTY. UNIT AMOUNT
(SOR SMC Pg No. 14 Design Mix M35) WORK UP TO PLINTH LEVEL
(1) Having cross sectional area upto 0.08 sq.mt.
Ground Floor 0.00 C.M. 9256.56
Terrace Floor 0.00 C.M. 9296.16
(2) Having cros sectional area more than 0.08 sq. mt and upto 0.12 sq.mt.
Ground Floor 0.00 C.M. 8337.55
Terrace Floor 0.00 C.M. 8377.15
(3) Having cross sectional area more than 0.12 sq.mt.
Ground Floor 61.00 C.M. 7260.79
Terrace Floor 0.00 C.M. 7300.39
(SOR SMC Pg No. 14 Design Mix M35)
(2) Slabs having more than 8 Cm & upto 10 Cm thickness.
Ground Floor ( 1st SLAB ) 0.00 C.M. 8149.44
SC Floor (2nd Slab) 0.00 C.M. 8189.04
(3) Slabs having more than 10 Cm & upto 13 Cm thickness.
Ground Floor ( 1ST SLAB ) 0.00 C.M. 7567.80
SC Floor (2nd Slab) 0.00 C.M. 7607.40
(4) Having more than 13 cm. Thickness
Ground Floor ( 1ST SLAB ) 55.00 C.M. 6989.63
SC Floor (2nd Slab) 0.00 C.M. 7029.23
(SOR SMC Pg No. 14 Design Mix M35)
Designing, providing and executing Bonded/ Unbonded Post-
tensioning works for slabs/beams/drop panels, etc. Including
decoiling the strands, cutting to the required lengths, supplying and
laying of sheathing (GI corrugated ducts), jointing with couplers
and inserting the strands, profiling, fixing live anchorages suitable
for tendons, grout vents, making dead end anchorages including
lowering the strands, fixing tendon support bars, supervising the
fixing of anti-bursting reinforcement, stressing the cables, end
trimming, grouting the cables with cement and admixtures, with
required plants and machinery tools and tackles, consumables etc.
including co-ordinating with Architectural/Structural consultants
drawings and obtaining approval from client/consultant/Project
Manager for the work done as per the requirement of
Architect/Structural Consultant at site. Also include Area marking
for Post tensioned elements. Area for the same shall be measured
19 within peripheral RCC beams/walls (Walls/beams not included) or
boundary of the slab etc. including all requisite as per Structural
Engineer instructions.Including all PT memberes (slab & beam)
stagging, shuttering and reproping shall be carried out as per
structural engineer's instruction and suggestion.(1) All Post
Tensioned Beams Detail Shall Only Be Provided After Finalization
Of Pt Vender By Contractor. (2) Rates Of PT beams Includes All
Ancillary Work/Facility/Item To Be Carried Out By Contractor For
Successful Execution Of PT Work. (3) All Required Reproping For
Long Span Beams/Slabs Or Other Critical Elements Shall Be Carried
Out By Contractor Without Any Extra Charge. (4) Contractor Has To
Kept Props For Rcc Elements As Per The Instruction And Detail
From Structural Consultant In Addition To Standard Norms As Per
Is : 456:2006 Without Any Extra Cost. (5) Contractor Has To Make
All Required And Necessary Provision To Support Cantilever
Slab/Beams Projections And Elements Which Required
(LIBRARY & RECREATION CENTER AT P.T.P.S. NO.
(KATARGAM), F.P.NO 133, IT:28 SCDUAL B )
DESCRIPTION QTY. UNIT AMOUNT
Providing, mixing, placing, compacting WORKby UP TO PLINTH LEVEL
vibrator, curing, testing M20 Design mix concrete as per
IS 456:2000 (latest revision) and as per tender
20 specification in all items including cost of form work and
rendering but excluding cost of reinforcement wall
(SOR SMC Pg No.14 Design Mix M20 (D))
Providing, mixing, placing, compacting by machine
vibrator, curing, testing M25 Design mix concrete as
per IS 456:2000 (latest revision) and as per tender
specification in all items including cost of form work and
rendering but excluding cost of reinforcement
(F) Stair cases including landing etc.
GROUND FLOOR (1 no. of staircase) 7.00 C.M. 7158.83
(B) Vertical and horizontal fins
Ground Floor ( 1ST SLAB ) 0.00 C.M. 9030.72
(SOR SMC Pg No. 14 Design Mix M25)
Providing & fixing IS Mark TMT Bar FE 500D
22 reinforcement for R.C.C. work incl. bending, binding &
placing in position etc.comp.---
Ground Floor ( 1ST SLAB ) 47867.00 Kg 76.21
First Floor (2nd Slab) 9110.00 Kg 77.21
Above SC Slab 820.00 Kg 78.21
(SOR SMC Pg No. 2 It No. 15)
Brick work using common burnt clay building bricks
having crushing strength not less than 35 kg./Sq.Cm. in
Cement Mortar 1:6 (1- Cement : 6 -fine sand) (C) Fly
Ground Floor ( 1ST SLAB ) 235.00 C.M. 4511.97
First Floor (2nd Slab) 64.00 C.M. 4786.95
Above SC Slab 14.00 C.M. 5061.92
(SOR SMC Pg No. 2 It No. 16)
Half brick masonry in common brunt clay building
bricks having crushing strength not less than
24 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - coarse
sand ) in foundation and plinth (C)Fly Ash Bricks
Ground Floor ( 1ST SLAB ) 313.00 S.M. 678.86
Terrace Floor (2nd Slab) 0.00 S.M. 685.11
(SOR SMC Pg No. 2 It No. 17)
Providing & Applying 15mm.th.cement plaster in
single coat on brick/concrete walls similar surfaces
for plastering & finished even & smooth with a floating
25 coat of cement slurry mixed with admixture of lime or
neeru in required proportion etc. comp. in C.M 1:3 (1
cement : 3sand) (A) For wall and similar surfaces
Ground Floor ( 1ST SLAB ) 1850.00 S.M 237.51
Terrace Floor (2nd Slab) 87.00 S.M 265.65
(SOR SMC Pg No. 3 It No. 25)
DESCRIPTION QTY. UNIT AMOUNT
Providing & Applying 10mm.th.cement WORK UP TO in
plaster PLINTH LEVEL
single coat on brick/ concrete walls similar surfaces for
plastering & finished even & smooth with a floating coat
26 of cement slurry mixed with admixture of lime or neeru
in required proportion etc. comp. in C.M 1:3 (1 cement :
3sand) (A) For wall and similar surfaces
(B) for ceilings and soffits of stairs
Ground Floor ( 1ST SLAB ) 731.00 S.M 214.60
Terrace Floor (2nd Slab) 31.00 S.M 242.74
(SOR SMC Pg No. 3 It No. 24)
Providing and fixing 150 mm wide, approved quality
chicken wire mesh (FRP / PVC)at junction of brick
work and RCC work or two dissimilar surfaces, at all
27 heights fixed by nails, rowal plugs or tag by cement
mortar 1:3 before applying the plaster, including curing,
scaffolding all complete as directed.
Ground Floor ( 1ST SLAB ) 130.00 S.M. 102.00
Terrace Floor (2nd Slab) 6.00 S.M. 102.00
(SOR SMC Pg No. 11 It No. 124) MR
Providing & Applying 20mm. Th. Heavy Roller plaster
on walls or similar surfaces at all floor levels consisting
of 12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3
28 sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1 cement:
1 sand) apply thick cement slurry and apply roller
horizontal as well as vartical ( two times ) up to good
quality and size of grain in elevation as per directed by
engineer incharge. Ground Floor ( 1ST SLAB ) 681.00 S.M 324.00
Terrace Floor (2nd Slab) 471.00 S.M 324.00
Above SC Slab 73.00 S.M 324.00
(SOR SMC Pg No. 3 It No. 28) MR
Providing throating or plaster drip and moulding it to
R.C.C. chajja etc. comp.. For all floor
Ground Floor ( 1ST SLAB ) 107.50 R.M 41.66
Terrace Floor (2nd Slab) 4.50 R.M 41.66
(SOR SMC Pg No. 3 It No. 29)
Providing 20 mm deep finished groove in plaster in
30 line and level etc. Comp. For all Floor (M.R.)
Ground Floor ( 1ST SLAB ) 107.50 R.M 50.00
Terrace Floor (2nd Slab) 4.50 R.M 50.00
(SOR SMC Pg No. 3 It No. 30) MR
Providing and laying Vitrified tiles 8 to 10 mm thick,
24" x 24" in flooring treads of steps and landing laid
31 on a bed of 12mm thick cement mortar 1:3 (1 cement
: 3 coarse sand) finishing with flush pointing in white
cement. Ground Floor ( 1ST SLAB ) 134.00 S.M 1040.35
Terrace Floor (2nd Slab) 0.00 S.M 1040.35
(SOR SMC Pg No. 4 It No. 44)
Providing and laying Vitrified tiles 8 to 10 mm thick,
24" x 24" in skrting risers of steps and dedo on
32 10mm thick cement plaster 1:3 (1 cement : 3 coarse
sand) and jointed with white cement slurry.
Ground Floor ( 1ST SLAB ) 433.00 S.M 1081.71
Terrace Floor (2nd Slab) 0.00 S.M 1081.71
(SOR SMC Pg No.4 It No. 45) M.R.
DESCRIPTION QTY. UNIT AMOUNT
Providing & laying Vitrified tiles of WORK8mm UP TO of
thick PLINTH LEVEL
Orient, Kajaria, Jhonson, Nitco, Somani, Bell, Asian or
Euro make in flooring,treads of steps & Landing laid
on bed of 20 mm (Average) base of cement mortar
1:6 (1 Cement : 6 Coarse sand) on new surface or fixing
33 on existing flooring by adhesive material including
dismentaling of existing flooring and jointed with colour
cement slurry including finished with flush pointing &
cleaning the surface etc. comp.Size 24" x 24" For
Ground Floor 28.50 S.M 1397.83
(SOR SMC Pg No.4 It No. 43)
Providing and laying polished Kota stone slab flooring
over 20mm (Average) thick base of cement mortar
1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime
34 putty :1.5 - coarse sand) laid over and jointed with grey
cement slurry mixed with pigment to match the shade of
slab including rubbing and polishing etc. complete. (A)
Ground Floor 498.00 S.M 989.45
(SOR SMC Pg No.4 It No. 32)
Providing and laying polished kota stone slab 25mm
thick in risers of steps,skirting Dedo and pillars laid
on 10mm thick cement mortar 1:3 (1- Cement :
35 coarse sand) and jointed with gray cement slury mixed
with pigment to match the shade of slab including
rubbing and polishing etc. complete.
Ground Floor 30.00 S.M 1076.94
(SOR SMC Pg No.4 It No. 33)
Providing and constructing sandwitch type Granite
stone cooking platform 0.6 mt. wide & 0.75 mt.
height, including one end side granite stone (Double
Polish) of 1.25 mt. height & front granite stone patti
of 10 cm wide, vertical partitions of half B.M. wall in
36 C.M. 1:4 and 10mm th. plaster in 1:3 with finishing
smooth with cement slurry as required and Stainless
Steel sink of 0.45 mt x 0.45 mt size of approved quality
and make with required all fitings & fixitures etc. comp
as per instruction given by site in charge at all floors.
(Basic rate of Granite Rs.1,200.00 / S.M.)
ALL FLOOR 25.00 R.M. 3128.00
(SOR SMC,Pg No.11, It No. 123) MR
Providing and filling in depressions of Bath and W.C.
At all floor levels, after completing plumbing work of
pans, pipes,traps etc.with cinder or fly ash as directed by
Engineer in charge etc. comp..
All Floor 14.00 S.M 500.00
(SMC SOR,Pg No.6, It No. 61)
Providing & fixing 35mm.th. Indian teak wood
shutters for doors, windows & clearstory windows
incl. Indian teak wood frames of finished size 12cm x
38 7cm.incl. anodized aluminum fixtures & fastenings incl.
Primer coat of approved quality & two coats of oil
painting etc. For all Floor
All Floor 24.00 S.M 5533.68
DESCRIPTION QTY. UNIT AMOUNT
(SOR SMC Pg No.5 It No. 53) WORK UP TO PLINTH LEVEL
Providing and fixing FRP FRAME size 125 x 65 mm
and 35 mm thick FRP shutter with wood grain raised
panneled design finish shutter having extra
reinforcement on sides & edges in Gel coat finish. The
core of the shutter & frame is to be filed up with injected
polyurethene foam done in situ along with embedded
39 wooden pieces for stiffening & also taking hinges &
fixtures. The whole FRP frame & shutter is to be
water proof weather proof,termite proof
&resistance to mild acid/alkali. Rates are to be
inclusive of S.S.hinges with fastener sleeve & alluminium
fixtures & fastentings.
(SMC SOR, Pg No.5 It No. 55)
Providing & fixing 35mm.th. Flush Door Solid Double
Core type Both Face water proof Ply Vennered &
mm th.laminate shall be pasted on both side with
adhesives as specified by the manufacturers. The
laminate shall be as per approved shade & texture, of
make incl. Sal wood frames of finished size 12cm x
7cm.incl. S.S. Hinges with nessary screws & Anodized
aluminum fixtures & fastenings For all Floor 0.00 S.M 3720.00
(SOR SMC Pg No.5 It No. 51) MR
Same as Above But Without Frame
All Floor 39.00 S.M 2520.00
(SOR SMC Pg No.5 It No. 52) MR
Providing and fixing window having extruded
aluminium Powder Coated section frame main outer
size 63.50 x 38.10 x1.95 mm (of Jindal section
no.4605, @ Wt. 1.094Kg/mt) horizontal Two track
member size 61.85 mm x 31.75 mm x 1.20 mm (of
jindal section no:8687, @ Wt. 0.695 Kg/mt.) vertical
member of size 61.85 mm x 31.75 mm x 130 mm (of
jindal section no:8758 @ wt. of 0.659 kg/mt) with
sliding shutters of horizontal member size 40 mm x18
41 mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456
Kg/mt) vertical member of size 40 mm x 18 mm x
mm (of jindal section no:8947, @ Wt. of
Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with 5 mm
thick tranparent bronze colour tineted float glass with
powder coated aluminium fittings and fixtures and
transparent silicon sealant glass fixing to frame as per
details etc. complete for window.
(A) Same as above but colour anodized 25.00 S.M 1705.67
SMC SOR Alluminium Work ITEM NO.3(A)
DESCRIPTION QTY. UNIT AMOUNT
Providing and fixing window having WORK extruded
UP TO PLINTH LEVEL
aluminium Powder Coated section frame main outer
size 95 mm x 24 mm x 1.17 mm (of jindal section
no:2459 @ Wt. of 0.738 Kg/mt), horizontal Three
track member size 92 mm x 31.75 mm x 1.30 mm (of
jindal section no;8688, @ Wt. 1.07 Kg/mt), vertical
member of size 92 mm x 31.75 mm x 1.50 mm (of jindal
section no:8933, @ Wt. 1.06 Kg/mt) with sliding
shutters of horizontal member size 40 mm x 18 mm x
42 1.29 mm (of jindal section no:8947 @ wt. of
kg/mt), vertical member of size 40 mm x 18 mm x
mm (of jindal section no:8949 @ wt. of 0.456 kg/mt)
with 5 mm thick transparent bronze colour tinted float
glass with powder coated aluminium fittings & fixtures
and transparent silicon sealant glass fixing to frame as
per details etc.
(A) Same as above but colour anodized
All Floor 33.00 S.M 1591.87
SMC SOR Alluminium Work ITEM NO.2(A)
Providing and fixing standared extruded of aluminium
section of size 61 x 37.0x0.90 mm (of Jindal section
no.14080, @ Wt. 0.471 Kg per mt) with colour powder
coated alluminium frame for Lovered Glass ventilation
with 5 mm thick Frosted glass as details etc. complete
for ventilation
All Floor 0.00 S.M 2414.00
A) Same as above but Colour anodized 5.50 S.M 2414.00
SMC SOR Alluminium Work ITEM NO.4A MR
Providing & laying granite slab 18mm thick in
Window-Door seal Frame Etc laid on 10mm thick
cement mortar 1:4 (1 Cement : 4 Coarse sand) with
44 nessary adhesive material and finished with flush
pointing in white or colour cement, including rubbing &
polishing comp.. (Basic Rate:- Rs.1000.0/S.M.)
For all Floors. 84.00 S.M 2026.00
SMC SOR , PAGE No.4 ITEM NO.41 MR
Labour Charges For Edge Finished For Granite for all
For all Floors. 808.00 R.M 43.43
SMC SOR, PAGE No.4 ITEM NO.42
Providing & fixing Powder Coated Aluminium partly
glazed and partly panelled partition using medium
duty sections of Hindalco,Zindal, Narmada, Banco or
Equivalent approved make having section 63.50 mm x
38.10mm ( Frame-.758 kg/rmt & Middle section-
Kg./rmt), Galzing Clip with 5 mm thick clear float glass
of approved make including all other necessary fittings
46 and fixtures. Entire work will have to be made water
proof using necessary rubber sectioned wherever
required. Gaps all round the frame to be filled with
approved water proof sealent. Bottom portion of doors
both side to be covered with 12mm thick prelaminated
particle board of approved make and quality and as per
DESCRIPTION QTY. UNIT AMOUNT
(A) Same as above but Colour anodizedWORK UP TO PLINTH LEVEL
For all Floors. 0.00 S.M 2400.00
SMC SOR Alluminium Work ITEM NO. 7(A)
Providing & fixing partly panel & partly glass Powder
Coated Aluminium doors with aluminium section of
Hindalco, Jindal , Narmada,Banco or Equivalent
approved make having Poder Coated outer frame Leg
Partition section of 63.50 mm x 38.10 mm having weight
1.158 kg. / R.M. shutter section having size 83.5 mm x
44.45mm ( top & bottom: 1.384 kg./rmt. and middle
1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm (
47 vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.),
Glazing Clip (Jindal Section No. 19370 Wt. 0.109 Kg./
Mt.) with 5mm thick sheet glass in acid frogting and
mm thick prelaminated sheet of Greenlam, Panama or
archid make as approved by Engineer-in-charge
including fixing brass pivot, handle, lock etc. complete.
(A) Same as above but Colour anodized
For all Floors. 0.00 S.M 3237.00
SMC SOR Alluminium Work ITEM NO. 6(A)
Providing & fixing M.S.Grills of required pattern to
wooden frames of windows etc. At all floor levels with
M.S. flats at required spacing & frame around square or
round bars with round headed bolts & round headed
bolts and nuts or by screws incl. Priming coat of Red
lead paint etc. comp.
(A) Plain grill For all Floors. 2955.00 Kg. 104.20
SMC SOR, PAGE NO 5 IT NO
Painting two coat (excluding priming coat) on new
steel and other metal surface with synthetic enemal
49 paint, burshing to give an even shade including cleaning
the surface of all dirt, dust and other foreign matters
For all Floors 148.00 S.M 65.31
SMC SOR, COLOUR IT.No. 8, Pg No.15
Providing and fixing stainless steel ( Grade 304)
railing made of Hollow tubes, channels, plates etc.,
including welding, grinding, buffing, polishing and
making curvature (wherever required) and fitting the
same with necessary stainless steel nuts and bolts
complete, i/c fixing the railing with necessary
50 accessories & stainless steel dash fasteners , stainless
steel bolts etc., of required size, on the top of the floor or
the side of waist slab with suitable arrangement as per
approval of Engineer-incharge, (for payment purpose
only weight of stainless steel members shall be
considered excluding fixing accessories such as nuts,
bolts, fasteners etc.)
SMC SOR, PAGE NO 11 ITEM NO 120, MR 379.00 Kg. 450.00
(1) The whole work is to be executed through
specialized agency with a guarantee of 10 (Ten) years
given on a prescribed proforma duly stamped (2) The
rate shall include for work at all floors & conducting
water proof test as directed. (M.R.)
DESCRIPTION QTY. UNIT AMOUNT
B) Providing and laying integral cement WORK UP water
based TO PLINTH LEVEL
proofing treatment including preparation of surface as
required for treatment of roofs, balconies, terraces etc.
consisting of following operations. (a) Applying and
grouting a slurry coat of neat cement using 2.75 kg/sqm
of cement admixed with proprietary water proofing
compound comforming to IS:2645 over the R.C.C. slab
including cleaning the surface before tratment.(b)
Laying cement concrete using broken bricks/brick bats
25 mm to 100 mm size with 50% of cement mortar 1:5
(1 Cement : 5 Coarse sand) admixed with proprietary
water proofing compound conforming to IS:2645 ,brick
bats is finally covered by jointless cement plaster 20mm
th. in C.M. 1:4 added with special water proofing
compound confirming to IS:2645 & top smooth finished
with trowel with false chequered marking of
mm.size.The treatment is carried along the vertical
surface of the parapet & other adjoining wall up to
height of about 300 mm in a shape of quarter round vata
Incl. curing etc. Comp. With average thickness of
mm and minimum thickness at khurra as 65 mm.(c) The
whole terrace so finished shall be flooded with water for
a minimum period of two weeks for curing and for final
test. All above
(c) The wholeoperations
terrace soto be down
finished in order
shall and aswith
water for a minimum period of two weeks for curing
and for final test. All above operations to be down in
order and as directed and specified by the engineer-in-
charge. With average thickness of 120 mm and
minimum thickness at khurra as 65 mm. (Cement
consumption 0.511 Bags / S.M.)
Terrace and staircabin top 846.00 S.M 511.00
SMC SOR, PAGE NO 6 IT NO 62 B M.R.
(A) Providing and laying water proofing treatment to
vertical and horizontal surfaces of depressed portions of
W.C.,kitchen and the like consisting of : (a) I course of
applying cement slurry @ 4.4 kg/sqm mixed with water
proofing compound conforming to IS : 2645 in
recommended proportions. (b) II course of a layer of
plaster in C.M. 1:3 with water proofing compound
confirming to IS:2645 about 25 mm. th' in the floor of
the depression & about 18mm th' On the side walls of
the depression up to the floor level, water proofing
plaster about 18 mm. th' be continued on the walls
above the floor level for a height of 600 mm. with
surface suitable to receive further treatment (c)
Finishing top with stone aggregate 10mm to 12mm
nominal size spreading @0.008 C.M./S.M., thoroughly
embedad in plaster layer. as per specifications &
instructions of Engineer in charge (Cement consumption
0.316 Bags / S.M.)
For all Floors 55.00 S.M 296.00
SMC SOR, PAGE NO 6,IT NO 62 B M.R.
DESCRIPTION QTY. UNIT AMOUNT
Providing and laying broken china mosaic WORK UP TOfor
flooring PLINTH LEVEL
terrace using 12mm to 20mm broken pieces of
glazed tiles to be laid over cement mortar 1:3 to plain
52 or slope and to be tempered to bring mortar creme out
upto surface using white cement including rounding off
junctions and extending them upto 15 cm along the wall
clearing with water and oxalic acid etc. as directed.
SMC SOR, PAGE NO 12 IT NO 131 846.00 S.M 747.29
Apply two coats of putty and two coats of primer of
approved brand and manufacture on new wall surface to
give an even shade including thoroughly brushing the
surface free from mortar dropping and other matter and
sand papered smooth.
(A) for wall and similar surfaces
For all Floors 1937.00 S.M 40.59
(B) for ceilings and soffits
For all Floors 762.00 S.M 40.59
SMC SOR, COLOUR IT.No. 4, Pg No.15
Wall painting (two coats) with plastic emulsion paint of
approved brand and manufacture on undecorated wall
surface to give an even shade including throughly
brushing the surface free from mortar droppings and
other foreign matter and sand papered smooth.
(A) for wall and similar surfaces
For all Floors 1937.00 S.M 79.39
(B) for ceilings and soffits
For all Floors 762.00 S.M 79.39
SMC SOR, COLOUR IT.No. 5, Pg No.15
Providing & applying two coats of weather shield max
paint (3 coats may be required in case of darker
colours.)of ICI Dulux or Apex Ultima of Asian Paint
including applying exterior acrylic primer coat as per
manufacturers specification and directions in shade and
colour approved by architects, on exterior surfaces of
the building including scaffolding, preparing the surface,
watering, curing etc. complete and as directed by the
architects and manufacturers. Surface Preparation :
surface is thoroughly clean, dry and free from all loose
dirt, chalk, grease, fungi, algae and flaking paint. This can
55 be achieved by brushing with a wire/ stiff coir brush,
followed by water jetting if required. Fill up all minor
cracks and defects with white cement and sand mixture
in the ratio 1:3. For application on previously painted
wall, previous coatings of paint must be thoroughly
scraped off and Clean the surface thoroughly using wire
brushes. Priming: Apply a liberal coat of exterior acrylic
primer and allow it to dry for 4-5 hours. Application of
putty is not recommended. Minimum 4-6 hours duration
is required between each coat of weather shield max
For all Floors 1225.00 S.M 82.00
SMC SOR, colour works,Pg No.16,item no.-17
DESCRIPTION QTY. UNIT AMOUNT
Providing & laying granite slab 18mm WORK thick
UP TO inPLINTH LEVEL
flooring, treads of steps and landing laid on bed of
20mm thick cement mortar 1:6 (1 Cement : 6 coarse
56 sand) or lime mortar 1:1.5 laid and finished with flush
pointing in white or colour cement including rubbing
and polishing complete. (Basic Rate:- Rs.1347.46/S.M.)
For all Floors. 28.00 S.M 2410.00
SMC SOR 15-16, PAGE NO 4,IT NO 39 M.R.
Providing & laying granite slab 18mm thick in
skirting, risers of steps, dedo and pillars laid on
10mm thick cement mortar 1:4 (1 Cement : 4 Coarse
sand) and finished with flush pointing in white or colour
cement including rubbing & polishing comp.. (Basic
Rate:- Rs.1347.46/S.M.)
SMC SOR 15-16, PAGE NO 4,IT NO 40 M.R. 11.00 S.M 2449.00
Providing and fixing M.S. Fan clamps type 1 to 16 mm
dia M.S. bar bent to shpe with hooked ends to RCC
58 slabs curing, layig including painting the exposed
portion of loops, all as per standard design complete.
For all Floors. 34.00 Nos 129.02
SMC SOR , PAGE NO 5, IT NO
Steel work welded in built up sections, framed work
59 including cutting, hoisting, fixing in position and
applying a priming coat of red lead paint
(A) in beams & joists channels angles, tees, flats with
connection plates or angle cleats as in main & cross
beams,hip & trussed purlins connected to common
raffers & the like.
For all Floors. 0.00 Qtl. 9047.86
SMC SOR ,Pg No.9, IT NO 98(A)
Providing & fixing in position collapsible steel shutters
with vertical channels 20 x10 x 2 mm. Braced with flat
iron diagonals 20 x5mm size with top & bottom rails of
60 T-iron 40x40x6mm. with 38mm dia. steel pulleys comp.
with bolts, locking arrangements, stoppers, handles incl.
applying a priming coat of Redlead paint etc. comp.
Ground Floor 36.00 S.M 5865.10
SMC SOR , PAGE NO 5, IT NO
Providing and fixing rolling shutters of approved
make made of 80 mm wide M.S. laths inter locked
together through their entire lenght and jointed together
at the ends by end locks mounted on specially designed
61 pipe shaft with bracket plates, guide channels and
arrangements for inside and outside locking with push-
pull operation including the cost of hood cover and
spring etc. complete. (B) Shutters having width 3.5 M
Ground Floor 0.00 S.M 4495.02
SMC SOR , PAGE NO 12, IT NO
Providing & fixing at all floor levels,both face polished
machine cut edge Marble slab for urinal partition
62 joined with grey/White cement slurry (1:1) incl.
Rubbing & polishing etc. complete. (M.R.)( Basic Cost-
SMC SOR, PAGE NO.7,IT NO 66 (MR) 2.00 S.M 1050.00
DESCRIPTION QTY. UNIT AMOUNT
63 Wall Vinyl Sticker WORK UP TO PLINTH LEVEL
SMC SOR, PAGE NO.13,IT NO 146 (MR)
Eco Solvent Vinyl Sticker (120 gsm) with Lamination
SMC SOR, PAGE NO.13,IT NO 147 (MR)
Solvent Vinyl Sticker (120 gsm) with Lamination (100
SMC SOR, PAGE NO.13,IT NO 148 (MR)
66 5mm PVC sheet Eco Vinyl (Any size) 40.00 SqFt. 55.46
SMC SOR, PAGE NO.13,IT NO 149 (MR)
Decorative theme base designing & painting with all
waterproof materials
SMC SOR, PAGE NO.13,IT NO 150 (MR)
Designing, Approving, Providing and Supplying of Flex
Banner with MS (mild steel) Frame with necessary
68 welding, red oxide painting of support/ additional
support if require including red oxide/ Anti corrosive
paint As per requirement & Direction of Engineer in
Any size 240 GSM ( Pipe Size 25x25x1.5mm) 100.00 SqFt. 53.10
STD.COMM.RES.NO.48/2022, DT.06/01/2022 incd.
Designing, Approving, Providing and Supplying of Cloth
Banner 140 GSM with MS (mild steel ) frame with
necessary welding,red oxide painting of
support/additional support if required including red
oxide/Anti corrossive paint As per requirement &
Direction of Engineer in Charge.
Upto 8 X 4 Feet 140 gsm ( Pipe Size 25x25x1.5mm)
STD.COMM.RES.NO.48/2022, DT.06/01/2022 incd.
Decorative wall painting with designing,Painting at
Place including necessary surface preparation, cleaning,
removal of dust & other foreign material and back
ground priming coat over the surface.
STD.COMM.RES.NO.48/2022, DT.06/01/2022 incd.
Slogan writing on walls with designing,Painting at Place
including necessary surface preparation, cleaning,
removal of dust & other foreign material and back
ground priming coat over the surface.
STD.COMM.RES.NO.48/2022, DT.06/01/2022 incd.
Providing, fixing, fitting S.S. Latter of quality SS 304 or
with colour powder coating incliuding Necessary fixture
72 & Fastaning with scaffolding etc. complete. As per 100.00 R.inch 85.00
requirement & Direction of Engineer in Charge.
RATE as Per EZ_B bord and S.S logo Samati for TPS
NO.22 , F.P. NO.76 (SARTHANA) incd GTS ITEM
Providing, Approving designing computer Graphics
design, Echo solvent Vinyl printing, matt Lamination
73 pasting on 6mm PVC sheet, spot fitting with both side 500.00 2.50
4mm Tape & silicon etc. complete.
RATE as Per EZ_B bord and S.S logo Samati for TPS
NO.22 , F.P. NO.76 (SARTHANA) incd GTS ITEM
DESCRIPTION QTY. UNIT AMOUNT
Providing, Approving designing and WORK UP TO
supplying 6mmPLINTH LEVEL
thick white Acrylic computer Laser cutting Latter
including necessary scaffolding, pasting on ACP sheet or
similar surfaces, etc. complete.
RATE as Per EZ_B bord and S.S logo Samati for TPS
NO.22 , F.P. NO.76 (SARTHANA) incd GTS ITEM
Designing, Approving, Providing and Supplying of Fixing
3mm ACP sheet silver colour including printing with
graphic design in red & blue colour paint latters / logo
75 and brush finished and framing etc. complete for 50.00 SqFt. 300.00
inangration/ foundation stone takti with decorative
wooden/PVC moulding 2"x1" as per approved by
Engineer in charge.
RATE as Per EZ_B bord and S.S logo Samati for TPS
NO.22 , F.P. NO.76 (SARTHANA) incd GTS ITEM
Extra for additional height of propping and centering
where the height of propping and centering exceeds 4 .O
M between supporting floor to ceiling including
temporary brick or stone pillars for supporting as
required. (i)Height more than 4.0 M.and upto 5.0 M.
RATE as Per R&B SOR IT: 9.2 (09002AA) PAGE No.
Extra for additional height of propping and centering
where the height of propping and centering exceeds 4 .O
M between supporting floor to ceiling including
temporary brick or stone pillars for supporting as
required. (ii) Height more than 5.0 M.and upto 6.0 M.
RATE as Per R&B SOR IT: 9.2 (09002BA) PAGE No.
TOTAL COST OF SUPER STRUCTURE
Water Supply & Sanitation
Prov.& Fixing water closet squatting pan (Orissa type
W.C.pan) at all floor levels, size 500mm x 400 mm
incl. 100 mm size "P'or "S" trap for water closet
78 squatting pan joining the trap with the pan & soil pipe in
C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous
Make- Cera S3010109, Parry ware
C0117CS/C0117*,Jaquar,HindWare
SMC sor- Sanitary Items,Page no22,It No.
Providing and fixing Wash Down Water closet European
type W.C. pan with integral P or S trap with normal
closing seat cover L bend ncluding jointing the trap with
soil pipe in cement mortar 1:1 (1 cement : 1 find sand)
(A) Viterous china pattern - I
Make- Cera CONVENTIONAL B1510121 , Parry ware
C0297*/ C0278,HindWare sleek 20011, Jaquar- CNS- 8.00 Nos 3282.00
WHT-751P180SPPZ
SMC sor- Sanitary Items,Page no21,It No.
Providing and fixing plastic seat and cover for wash
80 down water closet with C.P. brass hinges and rubber
buffers (B) Plastic seat and cover.
DESCRIPTION QTY. UNIT AMOUNT
For all Floors. WORK UP TO PLINTH8.00
LEVEL Nos 291.33
SMC sor Page no7 It No.
Providing & fixing Wash Hung basin with single hole
for pillar tap , Size- 550 x 400 mm at all floor levels, with
81 C.I. or M.S. Brackets painted white incl. cutting holes &
making good the same etc. complete. For all Floor
Make- Cera Cat. No. S2040121, Parry wareC0434*
(CTH), Jaquar SLS- WHT -6801 ,HindWare10004
SMC sor- Sanitary Items,Page no21,It No.
Providing & fixing 600 mm.x 450 mm. mirror of
superior glass at all floor levels, mounted on 6 mm.
82 th. A.C. sheet or plywood sheet & fixed to wooden plugs
with C.P.brass screws and washers etc. For all Floor
All Floor 6.00 Nos 833.73
SMC sor Page no7 It No.
Providing & fixing C.P. brass pillar cock with copper
connection, C.P. brass screws complete
Make- Cera F2013101, Parry ware Cat. No.: G3102A1,
HindWare Cat. No.: F650003, Jaquar FLR-5011N 12.00 Nos 1423.00
SMC sor Sanitary Items,Page no21,It No.
Providing & Fixing 15 mm Dia bib tap with wall Flange
at all floor levels, polished bright etc. comp
All floor 20.00 NO 1323.00
SMC sor Sanitary Items,Page no21,It No.
Providing flush cock consisting lever, cartridge sleeve &
flange & concealed part
Make- Cera EXPOSED PART F2013751 &Concealed part
F4060101 , Parry ware T9824A1&T9823A1, Jaquar FLR
5083 KN , CONCEALED BODY ALD-081,HindWare
F280052 & CONCEALED STOP COCK F850105
SMC sor Sanitary Items,Page no21,It No.
Providing & fixing 15mm C.P. brass angle valve (Stop
Cock) with C.P. copper connecting pipe 450 mm long
86 and nuts, washer and brass flange complete, including
cutting and making good the wall where required.
Make- Cera F1020362, Parry ware T0712A1, HindWare
Cat. No.: F440020 F850094, jaquar CON 053 KN
SMC sor Sanitary Items,Page no21,It No.
Providing and fixing Towel Ring fabricated from
seamless stainless steel tube 2mm thick in bath room
with polished wall flange at end of bars with heavy duty
anchor fasteners & accessories.
Make- Cera F5014115CH, Parry ware F5014115CH,
Jaqua ACN 1121N ,HindWare F880007
For all Floors. 8.00 Nos 890.00
SMC sor Sanitary Items,Page no21,It No.
Providing & Fixing stainless steel recessed type Soap
dish of approved make. Including providing & fixing
screws, washers, cutting & making good the walls.
Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-
1131N ,HindWare F880011
DESCRIPTION QTY. UNIT AMOUNT
For all Floors. WORK UP TO PLINTH8.00
LEVEL Nos 793.00
SMC sor Sanitary Items,Page no21,It No.
Providing and fixing PVC SWR Nahni trap IS 14735 for
drain - 110x110 mm diameter with jali of the
following nominal diameter of self cleaning design with
C.I. scread down or hinged grating including the cost of
cutting and making good the walls.
All floor 15.00 558.36
SMC sor.Page no 8,It No.
Providing & Fixing U-PVC pipe (SWR) confirming to IS
no. 13592 (Type "B") of Prince/ Supreme/ Jain/
Astral/ Tulsi/ Finolex make for soil and waste discharge
90 system at all floor levels incl. All fixtures like bends, tees,
shoe etc. jointed with resin of approved brand &
manufacture etc. comp. (M.R.)
SMC sor,Page no 8 It No. 84 M.R.
Providing & fixing U-PVC pipes Confirming to IS no.
13592 (Type "A") of Prince/Supreme/Jain/Astral/
Tulsi/ Finolex make for rain water at all floor levels incl.
fixtures like bends, tees, shoe etc joined with resin of
approved brand & manufacture etc. comp. (M.R.)
SMC sor ,Page no 8, It No. 85 M.R.
Providing & Fixing in position PVC Cowl vent to pipes
of Prince/Supreme/Jain/Astral/Tulsi/Finolex make
SMC sor- Page no.8, It No.
Providing & Fixing Kathi around the vertical PVC
drainage pipes for concealing with cement plaster
93 mm avg thickness(CM 1:3 [1 cement :3 coarse sand])
finishing as per instruction given by Eng. incharge. for
(A) 75 mm PVC PIPE 20.00 R.M 173.00
(B) 100 mm /110 mm PVC PIPE 20.00 R.M 180.00
SMC sor- Page no 8, It No. 93 MR
Providing, Laying and jointing on true line and level
UPVC pipe (SCH-40) line of Prince/ Supreme/ Jain/
Astral/ Tulsi/ Finolex make including fittings make or
equivalent as approved by angineer-in-charge. Pipe shall
94 be fixed on the wall the help of clamp at every two meter
C/C or shall be concealed as directed including
necessary fittings etc. including testing of pipe and joints
and fixing the same with adhesive solvent, including cost
SMC sor Page no 8 It No.
DESCRIPTION QTY. UNIT AMOUNT
Providing & Fixing P.V.C. pipes (SCH-80) WORK of UP TO PLINTH LEVEL
Supreme/ Jain/ Astral/ Tulsi/Finolex make for water
supply line at all floor levels incl. fixtures like bends,
tees, shoe etc joined with resin of approved brand &
95 manufacture etc. comp. Pipe shall be fixed on the wall
the help of clamp at every two meter C/C or shall be
concealed as directed including necessary fittings etc.
including testing of pipe and joints and fixing the same
with adhesive solvent, including cost of all materials.
SMC sor Page no 8 It No. 87 MR
Providing and fixing M.S. holder bat clamps at all floor
level,of approved design to C.I. or S.C.I pipes including
cost of cutting holes and making good the wall etc. comp.
SMC sor- Page no 8, It No.
Providing & fixing Z - clamps at all floor levels of
approved design to C.I. S.C.I. or PVC pipes including the
cost of cutting holes & making good the wall etc.
(C) 150 mm to 200 mm dia 20.00 NO 98.00
SMC sor- Page no 11, It No. 121 M.R.
Providing & Fixing gun metal check or non return full
98 way wheel valve at all floors levels, etc. complete.
SMC sor Page no 8,It No.
Providing & Fixing abonite ball cock of approved
qualities directed etc. comp.
SMC sor- Page no 8,It No.
Providing, Lowering & laying joining R.C.C. NP2 CLASS
Pipe In C.M. 1:1 of following nominal internal diameters
incl. Testing of pipes and joints etc. Comp.
SMC sor- Page no.7, It No.
SMC Storm drainage SOR 22-23, Page no1 It No.1
DESCRIPTION QTY. UNIT AMOUNT
Prov. & Fixing S.W. Gully trap with WORK UP TO
C.I.grating PLINTH LEVEL
masonary (C.M 1:5)chamber & water tight C.I. cover
with frame of 300mmx300mm size (inside) with weight
101 includ. plastering smooth inside & outside 15mm. th' in
C.M.1:3 etc. comp. (i) Square mouth traps---(A) 100mm
x 100mm Size -P type
SMC sor,Page no 7, It No. 73 5.00 Nos 1292.19
Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with
Inside dimension ,455 x 610 mm & 450 mm deep
sewer trap chamber with 23 cm th' B.B. masonary
walls in C.M 1:5 with cement plaster 15 mm th' in C.M.
102 1:3 inside & outside to exposed faces, R.C.C. top slab 0.00 No. 3155.63
with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone
aggregate 20mm size) ,Foundation concrete 1:5:10 &
fixing C.I. cover with frame to be not less than 38 kg. On
(A).Same for single
as above but pipe.
Precast RCC heavy duty Cover
instead of C.I. Cover
Extra for every additional depth of 0.1 mt.beyond 0.45 0.00 Each 222.71
SMC sor, Page no.7, It No.75
Providing & construction simple chamber of 23 cm. th'
B.B. Masonary in C.M 1:5 with cement plaster 15 mm
th' in C.M. 1:3 inside & outside to exposed faces, R.C.C.
top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade
103 stone aggregate 20mm size) ,Foundation concrete 0.00 No. 2932.93
1:5:10 & fixing C.I. cover with frame to be not less than
38 kg. On top etc. comp. Inside dimension,455 x
mm &450 mm deep for single pipe
(A).Same as above but Precast RCC heavy duty Cover
instead of C.I. Cover
Extra for every additional depth of 0.1 mt.beyond 0.45 0.00 Each 242.39
SMC sor - Page no7,It No.76
Providing and fixing C.I. manhole cover 0.60 mt. x
104 mt. size having weight not less than 35 kg. etc.
SMC sor- Page no.8, It No. 83 5.00 NO 958.17
Providing and fixing G.I, Rain water spout of 50 mm dia
and 30 cm Length
SMC sor- Page no 6 It No. 64 15.00 NO 101.91
Providing & fixing white vitreous china urinal of size
450 x325mm as per IS-2556 (Part-2 ) with C.I. hangers
106 and 15mm dia. C.P. spreader,32mm dia CP bottle trap
and pipe to wall with C.P. flange complete including
cutting and making good the walls and floors wherever
Make- CeraCat. No. S4020103, Parry ware C0501*,
Jaquar URS-WHT 13261H ,HindWare BACK SMALL 4.00 NO 2476.00
SMC SOR- Sanitary Items,Page no.21, It No.8
Providing & fixing at all floor levels,both face polished
machine cut edge Marble slab for urinal partition
107 joined with grey/White cement slurry (1:1) incl.
Rubbing & polishing etc. complete. (M.R.)( Basic Cost-
SMC sor- Page no7 It No. 66 MR 3.00 S.M 1050.00
DESCRIPTION QTY. UNIT AMOUNT
Providing & laying ordinary C.C.1:1.5:3WORK UP R.C.C.
mix for TO PLINTH LEVEL
work incl. boxing, centering, vibrating, curing & mixed
with approved water proofing cement compound or
"CEMWET"or"PIDICRETE LW"integral water proofing
admixture as water proofing agent to be mixed with
kg. cement bag shall be as recommended by the
manufacture of the water proofing material, concrete
work for top, bottom slab & side pardi for Under ground
Tank & Item incl. Necessary excavation & refilling the
108 available earth, 15 cm th' C.C 1:4:8 for bedding concrete,
Half B.M. in C.M. 1:4 outside wall, inside R.C.C. pardi as
per design, 10mm.th. water proofing cement plaster in
C.M. 1:3 with smooth finishing,watering etc.Comp.to all
inner face & bottom of tank curing etc. comp. incl.
Locking arrangement, outlet, inlet, overflow & wash out
pipe arrangement as necessary & C.I. Cover 0.60 x .045
weight not less then 35kg. etc. com. as per structural
drawing excluding Steel & as directed by Engineer in-
Under Ground water Tank 100000.00 Lit 5.46
SMC sor - It No.
Providing & Laying white glazed tiles 6mm. th. of
Orient, Kajaria, Jhonson,Nitco,Somani ,Bell make at all
109 floor levels, in flooring, treads of steps & landings laid
on a bed of 12 mm. Av. Th.C.M.1:3(1cement :3 sand)
finished with flush pointing in white cement etc.com. For
Under Ground water Tank 53.50 SM 857.42
SMC SOR, Page no4, It No.
Providing & Laying white glazed tiles 6mm. th. Of
Orient, Kajaria, Jhonson,Nitco,Somani,Bell make at all
floor levels in skirting risers of steps & dado on 10 mm.
th. C.M.1:3(1cement :3 sand) including necessary
cement paste for fixing and joined with white cement
slurry etc. complete. For all floors
Under Ground water Tank 114.00 SM 887.64
SMC SOR, Page no4, It No.35
Providing & fixing IS Mark TMT Bar FE 500D
reinforcement for R.C.C. work incl. bending, binding &
placing in position etc. comp. Upto G.L./P.L.
Upto G.L./P.L. 3680.00 Kg. 76.21
SMC SOR- Page no1, It No.
Providing erecting and fixing double coated Sintex /
Super / Reno PVC (ISI) mark water tank of required
capacity each with all necessary fittings & connection
etc. complete on terrace.
SMC SOR- Page no 8, It No.
Total cost of Water supply & sanitation
ELECTRIFICATION WORK
S.O.R. Description Unit Total
Qnty. Without GST
A INTERNAL WIRING
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of
1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC
insulated multi strand copper wires up to 10 mtr length , in
below type of pipe erected with 6A Modular type switch / bell
push & accessories and earth continuity of following type,
1-2-1. erected on PVC / Metallic/Wooden box, single mounting base
frame covered with textured/metallic/white front plate
modules erected on / in wall / ceiling as per pipe erected, with
necessary Lamp holder/ceiling rose / H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete Cat. III
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete Cat. III
1-2-1. (For point wiring in bathroom and W/C and washbasin area in 0 Pt. 224.73 -
residential quarters reduce overall rate by 50% of point wiring
Point wiring for secondary light point with 2-1.5 sq.mm &
earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV
grade FRLS PVC insulated multi strand copper wires, in below
type of pipe to be erected complete with earth continuity and
necessary connection with primary light with accessories erected
on Metal / PVC / wooden box covered covered with
appropriate front plate modules erected on / in wall / ceiling for
open / concealed wiring. with necessary Lamp holder / ceiling
rose / H.D.Connector as directed.as per pipe erected with
following type of accessories.
Note:- Maximum up to 6 mtrs length, excess will be considered
as Mains for Secondary Point.
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete
Point wiring for FAN with 2-1.5 sq.mm & earth wire of
sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC
insulated multi strand copper wires up to 10 mtr length, in below
type of pipe erected with 6A Modular type switch and hum free
EME step type electronic fan regulator mounted and
accessories with earth continuity of following type erected on
PVC / Metallic/Wooden box, single mounting base frame
covered with textured/metallic/white front plate modules
erected on / in wall / ceiling as per pipe erected. with necessary
ceiling rose / H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete, Cat. III
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm
(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated
multi strand copper wires up to 10 mtr length, in below type of
pipe erected complete with Modular type switch & 5 pin Plug
erected on PVC / Metallic/Wooden box covered with
1-2-3. appropriate front plate modules erected on / in wall / ceiling as 12 Pt. 473.69
per pipe erected with following type of accessories.
[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from
nearby switchboard/mcb db board
S.O.R. Description Unit Total
Qnty. Without GST
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete, Cat. III
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm
(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated
multi strand copper wires up to 10 mtr length, in below type of
pipe erected complete with Modular type switch & 5 pin Plug
erected on PVC / Metallic/Wooden box covered with
1-2-3. appropriate front plate modules erected on / in wall / ceiling as 18 Pt. 697.91
per pipe erected with following type of accessories.
[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire
from mcb db board.
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete, Cat. III
Point wiring for Individual Plug with & earth wire both are of ISI
marked 1.1 KV grade FRLS PVC insulated multi strand copper
wires up to 10 mtr length, in below type of pipe erected
complete with Modular type switch & 5 pin Plug erected on PVC
/ Metallic/Wooden box covered with appropriate front plate
modules erected on / in wall / ceiling as per pipe erected with
following type of accessories.
[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire
with 2.5 sq.mm ( green) earthing wire from mcb d b board.
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete, Cat. III
Point wiring for on board Looped Plug with 6A Modular type
switch & 5 pin socket erected on PVC / Metallic/Wooden box,
1-2-4. single mounting base frame covered with textured / 20 Pt. 241.39
metallic/white front plate modules erected on / in wall / ceiling
with following type accessories, Cat. III
Point wiring for Two Way Controlled Light Point with 2-1.5
sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI
marked 1.1 KV grade FRLS PVC insulated multi strand copper
wires erected in below type of pipe with 6A Modular type
switches and following type of accessories erected on PVC /
1-2-5. Metallic/Wooden box, single mounting base frame covered with 0 Pt. 560.55 -
textured / metallic/white front plate modules erected on / in
wall / ceiling as per pipe erected. with necessary batten/angle
holder or ceiling rose or H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete, Cat. III
but for 2 nos of 2.5 sq.mm FRLS PVC insulated copper conductor
wires with 1 no 1.5 sq.mm FRLS PVC insulated conductor wire
(Green color for earthing) for 16 A AC starter with universal
socket up to satisfaction of E.I.C. (Excluding Main Line, including
16A AC starter & Socket)
Providing following type of Modular Type Accessories mounted
with PVC / metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate , modules
erected with necessary connections as per site situation
directed by Engineer In charge.
(3) Two Pin/RJ-11 Telephone Socket
[A] For One Gang, Cat. III 1 Ea. 153.52
[B] For Two Gang, Cat. III 1 Ea. 200.99
(4) TV Co-axial Socket outlet, Cat. III 1 Ea. 153.52
(7) Blank Plate Single, Cat. III 1 Ea. 24.24
S.O.R. Description Unit Total
Qnty. Without GST
(8) Computer RJ-45 socket, Cat. III 1 Ea. 153.52
(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit
Complete, Cat. III
(19) Modular Indicating Call Bell, Cat.III 1 Ea. 314.11
(20) Modular Buzzer, Cat.III 1 Ea. 143.42
Providing and erecting ISI mark Medium class RIGID PVC PIPES
of following size complete to be erected on/in wall or ceiling
erected with necessary PVC fittings & Junction boxes fixed with
adhesive solution & Clamps with following dia of pipes, in
1-3-2. approved manner as directed.
Providing & erecting PVC Corrugated Flexible Conduit with
required nos. of coupling, PVC bushes, Check-nuts etc. complete
of following sizes.
Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping)
having double-locking arrangement with grooves, trunking of size not
below 12.5 mm in height as per IS with accessories of PVC/Resin
1-3-5. polypropylene not below 1.8 mm thick duly sealed in joint & erected
on wall / ceiling of following size .
Providing and erecting Mains with 1.1 KV grade FRLS PVC
insulated ISI marked stranded Copper conductor wire in
following type of pipe to be erected concealed in /flushed on
wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for earth continuity of
(A) (A) With medium class Rigid PVC pipe and accessories
(a) 2 wire 1.5 sq. mm 70 Mtr. 59.59
(b) 2 wire 2.5 sq. mm 310 Mtr. 78.78
(b) 2 wire 2.5 sq. mm
providing and erecting Mains with 1.1 KV grade FRLS PVC
insulated ISI marked stranded Copper conductor wire in
1-4-2. following type of pipe to be erected in / on wall / ceiling with
sq. mm copper conductor FRLS PVC insulated stranded wire of
green colour for earth continuity of following size
(A) with medium class Rigid PVC pipe and accessories
(A) (a) 2 wire 4 sq. mm 30 Mtr. 107.06
(d) 3 wire 4 sq. mm Mtr. 159.58 -
Providing & Erecting approved make following size of TV Co-axial
flexible cable comprising inner conductor of solid bare copper
insulated with Foam PE & Secondary conductor made of poly -
Aluminium film bonded Al. Braids @ suitable coverage overall
sheathed with black PVC insulation.
Supplying & erecting approved make Telephone Cable
electrolytic copper conductor PE insulation twisted in two pairs,
& wrapped with FRLS PVC tape & sheathed with FRLS PVC or
HFFR outer Jacket suitable for telephone wiring & confirming to
C-DOT erected in existing pipe. of following size of conductors &
nos.of pairs. With necessary connections.
S.O.R. Description Unit Total
Qnty. Without GST
[A] Conductor Size 0.5 mm
(2) Two Pairs 0 Mtr. 19.19 -
(b) Armoured [Jelly Filled]
(1) Ten Pairs 0 Mtr. 120.19 -
(2) Twenty Pairs 0 Mtr. 190.89 -
(3) Fifty Pairs Mtr. 446.42 -
Providing & erecting main Distribution (MDF) indoor type, back
mounted frame as per DoT standard approved with krone strips
(a) Suitable for 10 pair 0 Ea. 949.40 -
(b) Suitable for 20 pair 0 Ea. 1311.99 -
(c) Suitable for 50 pair Ea. 1678.62 -
Supplying & erecting M.S. Box having 16 Gauge painted with
red oxide or Heavy duty PVC box erected flushed on wall or
concealed in wall with necessary plastering & finishing as
directed of following size.
Providing & erecting Switch board for Computer or electric
apparatus consisting of following items in single board erected
on PVC / Metal/Wooden board concealed/open with 3 mm
thick PC (Polycarbonate) / Acrylic sheet erected as directed
1 no. 6A/16A universal plug-switch combined.
3 nos. 6A Switch
3 nos. 6A 5 pin Plug
For Modular Type Accessories, Cat. III 0 Ea. 1081.71 -
Decorative call bell Ting-tong box type 250 volts complete
B L.T. SWITCHGEAR AND DIST. BOARD & L.T. PANEL
MICRO. BASED LSGD RELEASE MCB , 4 POLE, 25 KA
R Y B INDICATOR
ON OFF INDICATIOR
40 AMP., 4 POLE MCB-B CURVE, 10 KA, WITH ON OFF INDICATOR :
40 AMP., 4 POLE MCCB, 25 KA, FOR FIRE PUMP - WITH ON OFF
INDICATOR : 1 No.
32 AMP., 4 POLE MCB-C CURVE, 10 KA, FOR DRINKING WATER PUMP
MR WITH ON OFF INDICATOR : 1 No. 0 Ea. 152762.50 -
32 AMP., 4 POLE MCB-CURVE, 10 KA,WITH ON OFF INDICATOR
(SPARE) : 1 No.
63 AMP., 4 POLE MCB-B CURVE, 10 KA (SPARE) WITH ON OFF
INDICATOR : 1 No.
40 AMP., 4 POLE MCB-B CURVE, 10 KA, (SPARE) WITH ON OFF
INDICATOR : 1 No.
16 AMP. 4 POLE MCB-B CURVE, 10 KA, (SPARE) WITH ON OFF
INDICATOR : 1 No.
16 AMP. ., 2 Pole, MCB-B CURVE, 10kA, (SPARE) WITH ON OFF
INDICATOR : 1 No.
16 AMP., 2 Pole, MCB-C CURVE, 10kA, (SPARE) WITH ON OFF
INDICATOR : 1 No.
S.O.R. Description Unit Total
Qnty. Without GST
Providing and erecting Sheet Steel powder coated MCB
distribution board - flush / surface mounted fitted with busbar,
neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &
IEC 61439-1 & 3 without MCB to house appropriate nos. of
MCBs.(The DBs should be used of same company of MCB to be
used) suitable for
(B) three phase incoming and single phase horizontal type outgoing
Per phase isolation type (PPI)
(b) sheet steel double door
(ii)6 way 2 Ea. 2913.85
(iii)8 way (As Main GFLDB, FFLDB, SFLDB, TFLDB) 0 Ea. 3412.79 -
(iii) 8 way (As Raw Power DB {RPDB} GF + FF + SF) Ea. 4025.86 -
(ii) 6 way (As A.C. DB {ACDB} GF + FF + SF) Ea. 3437.03 -
3-12-2.(ii) RCCBs, 30 mA, 10 KA, 40 Amp., FP, Cat. III (INCOMER) 0 Ea. 2637.11 -
3-10-4.(b) MCB, 10 KA, 40 Amp., FP, Cat. III (INCOMER) 2 Ea. 638.32
3-12-1. RCCBs, 30 mA, 10 KA, 25 Amp., DP, Cat. III (OUTGOING) 6 Ea. 1969.50
3-10-1.(B) MCB single pole 6A to 25A, 10 KA Cat. III (10 Amp)(OUTGOING) 15 Ea. 112.11
Providing & erecting 240 V MCB double pole switch for motor &
inductive load (C Curve) having 10 KA breaking capacity &
confirms to IS : 8828 in existing box having following capacity,
Cat III, (A) 6 to 32 Amp.
Providing & erecting 240 V MCB double pole switch for lighting
Load (B Curve) having 10 KA breaking capacity & confirms to IS :
8828 in existing box having following capacity, Cat (III), 6 to
Providing & erecting 415 V MCB Four Pole for Motor &
Inductive Load (C Curve) having 10KA breaking capacity &
confirms to IS :8828 in existing box having following capacity, Cat
III, 6 to 32 Amp.
Supplying & erecting approved make Electronics Starter and
relay for air conditioners in ABS plastic moulded housing.
Company fabricated with bakelite terminal for connection with
silver coating bimetallic contact in switching device for o/p with
following features.
3-10-6-B (1) Low Voltage Protection below 130 V 0 Ea. 886.78 -
(2) High Voltage protection above 270 V
(3) Overload protection for 2-5, 4-10, 8-14, 10-16, 14-22 Amp.
(inverse time chara-)
(4) Indicating LEDs for AC on LV, HV, O/L, T/D
(5) With unique feature of 3 minute of time delay
Plastic enclosure fitted with DIN rail suitable for incorporating
One / Two nos. MCB
Plastic enclosure fitted with DIN rail suitable for incorporating
Three /Four nos. MCB
Sheets steel powder coated enclosure suitable for incorporating
One/Two nos. MCB.
Providing and erecting metallic vitrified danger notice board as
3-13-1. per language suggested by engineer incharge for MEDIUM 1 Ea. 69.69
VOLTAGE installation to be erected as per IS-2551.
Providing & erecting Medium Voltage Danger Notice Board
3-13-3 sticker as per language suggested by engineer incharge of 0 Ea. 26.26 -
standard size as per IS-2551
S.O.R. Description Unit Total
Qnty. Without GST
providng and erecting Approved make single phase electronic
energy meter rating 5A/20A/40A based on ASIC (Application
Specific integral circuit) digital technology with accuracy Class-I,
temper proof, free from effect of external magnetic field with
phase, earth, reverse and impulse indications, 6 digit electro-
mechanical counter suitable to work on 120 V to 300V, 45 -
Hz., housed in robust enclosure complete to be erected as
directed with 3 year replacement guarantee. Cat. III
providng and erecting Approved make energy meter 3 phase
wire unbalanced load rating, 10A to 60 Amp. based on
ASIC(Application specific Integral Circuits) digital technology with
accuracy Class - 1 , temper proof, free from effect of external
magnetic field with 3 phase indication, earth & impulse
indication, 6 digit electro mechanical impulse counter, suitable
work on 120 V to 300V per phase 45-55 HZ, housed in robust
enclosure with erection as directed. Cat. III
C INDOOR LIGHTING ITEM
Supplying and erecting LED indoor fittings with LEDs of wattage
0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing
used as a heat sink shall be made of thick sheet Steel conforming
to IS: 513/CRCA/ aluminium die cast powder coated and high
U.V. & corrosion resistance with diffuser with company
mark/name 160V to 270V, Power Factor more than 0.9, THD <
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 %
2-15-1. ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.)
(A) Tube Light with integral driver
(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet, Cat. III 0 Ea. 165.64 -
(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet 6 Ea. 295.93
(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet 25 Ea. 373.70
(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet,Cat. III 0 Ea. 535.30 -
Supplying and erecting LED lamps with following wattage
capacity of 220 to 240 voltage, minimum 15000 burning hours
life, 500 V in built-surge protection,Polycarbonate diffuser,
mounting suitable for E14 / E27 / B22 lamp holders, pf >=
(A) LED Lamps integral type, with PC diffuser suitable LAMP
holder, Cat. III
(i) 2 to 3 watts 0 Ea. 69.69 -
(ii) 5 to 8 watts 15 Ea. 112.11
S.O.R. Description Unit Total
Qnty. Without GST
Supplying and erecting LED indoor fittings with LEDs of wattage
0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing
used as a heat sink shall be made of thick sheet Steel conforming
to IS: 513/CRCA/aluminium pressure die cast powder coated
and high U.V. & corrosion resistance with diffuser housed in
aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.9, THD < 15 %,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.)
(A) Square/ Circular shaped Surface/Recessed Mount
Downlight with provision for spring loaded mounting clips
(ii) 11-15 watts, Surge-2 KV, Cat. III 0 Ea. 427.23 -
(iii) 16-20 watts, Surge-2 KV, Cat. III 0 Ea. 589.84 -
(iv) 22-24 watts, Surge-2 KV, Cat. III 0 Ea. 758.51 -
(B) LED Panel Light with provision for Plane front frame with
translucent cover fixed to housing complete.IP20
(vi) 36 watts, 24" x 24", Surge- 2KV, Ct. III Ea. 2348.25 -
(G) Step Light having Aluminium die cast and ABS Plastic
2-15-3. (i) 5 watts, Direct/Indirect luminaire, Cat. III Ea. 747.40 -
Supplying and erecting LED street light / Flood light fittings with High
power White LEDs wattage of 3 Watt and above assembled on single
MCPCB, efficiency more than 130 lm/w and corrosion free High
pressure die cast aluminum housing with smooth finish powder coated
and heat sink extruded aluminium with diffuser and Polycarbonate
optics/ lenses, with toughened glass with company mark/name
engraved or embossed 160 to 270 V,Power Factor more than 0.95,
THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire
efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings
required LM-79 & LM-80 certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED fittings.The Engineer
incharge may select any wattage capacity between the ranges shown.)
(A) Street Light (IP-65), Surge protection -4KV integral and ,Light
must have 440VAC line supply with over-voltage protection.
(iv) above 90 to 120 watts, Cat. III
(Wall mounting outside)
Outdoor street light fitting side entry with clear acrylic /plastic /
polystyrene cover complete with starter, polyester choke copper
wound complete erected with 40/36 watt tube holders. with
lead wire and connections. (For Second Floor terrace)
(a) With 1 tube 40 watt.120 cms, Cat. III Ea. 1111.00 -
(B) LED Panel Light with provision for Plane front frame with
translucent cover fixed to housing complete.IP20
(vi) 36 watts, 24" x 24", Surge- 2KV, Cat. III 0 Ea. 1794.77 -
S.O.R. Description Unit Total
Qnty. Without GST
Supplying and erecting LED street light / Flood light fittings with
High power White LEDs wattage of 3 Watt and above assembled
on single MCPCB, efficiency more than 130 lm/w and corrosion
free High pressure die cast aluminum housing with smooth finish
powder coated and heat sink extruded aluminium with diffuser
and Polycarbonate optics/ lenses, with toughened glass with
company mark/name engraved or embossed 160 to
V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to
2-16-2. 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 10 Ea. 7266.95
lumens/watt . LED driver efficiency > 85 %.( fittings required LM-
79 & LM-80 certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The Engineer incharge
may select any wattage capacity between the ranges shown.)
(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light
must have 440VAC line supply with over-voltage protection.
(iv) above 90 to 120 watts
Supplying and Erecting Of L.E.D. type High bay fixture having
Power Consumption of following watts with, Input Voltage 110 -
290 V.AC with full efficiency, Power Factor > 0.9 with 50/60 HZ,
CCVC LED Driver used for maximum power saving, Best Quality
luminium alloy housing and aluminium Dome for etter heat
dissipation, CCT Cool white (6000K), CRI 80, Beam angle >
dgrees, working temperature -20 degc to +55 degc, Body IP
D OUTDOOR LIGHTING ITEM
Supplying and erecting B class Galvanized iron pipe having smooth
finished bore of the pipe on both ends erected nuts and bolts along
the pole / wall shaping the pipe as per site requirement. Pipe dia as
6-5-5 following.
(A) 25 mm dia Mtr. 212.10 -
Supplying & erecting approved make SMC press moulded
composite FRP. loop-in, loop-out approx. 2mm thick box
complete with Bakelite connector strip 5way(3P+N+E),DIN rail
for mounting mob & hinged doors as per requirement having
locking arrangements with mounting clamp with nuts, bolts &
washers suitable for erection on pole with cable clamps& earth
bolt of following size of box.
(F) 200mm x 180mm x 100mm [deep] Ea. 639.33 -
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable
multistrand / Solid Copper conductor for 1.1 KV. to be laid on
wall with necessary clamps or in existing trench / pipe at road
crossing or floor of following size of cables. (For wall mounted
street light / flood light luminaries)
(B) 4 core 4 Sq. mm Mtr. 426.22 -
Providing and, fixing heavy duty flange type brass cable gland
with rubber ring for PVC insulated armoured cable complete
4-6-1. with out going tails, insulating tape etc for following size of
cables. (For wall mounted street light / flood light luminaries)
(A) 2 to 4 core 2.5 / 4 Sq. mm Ea. 37.37 -
S.O.R. Description Unit Total
Qnty. Without GST
Solder less crimping type Copper lugs conforming to IS suitable for
cable of following size evenly crimped with high pressure tool &
connected to switchgear terminals with brass/cadmium plated nut
bolts in an approved manner. (For wall mounted street light / flood
light luminaries)
Supplying & erecting approved make IP 55 grade Company fabricated
Timer Panel of following capacity for switch On-Off street lights on
time scheduling basis made from 16G CRCA sheet duly epoxy power
painted inside and outside with hinged doors and locking arrangement
consisting of suitable size of 4 Pole MCB and 4 pole contactor (cat-
III)with analog time switch, auto manual switch of same make and
suitable input and output Bakelite terminals and with door earthing
approved by Engineer in charge.(For wall mounted street light / flood
light luminaries)
D FAN AND RELEATED ITEM
Supply, Installation, Testing and Commissioning of suitable
sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct
Current (BLDC) permanent ferrite magnet Motor, class of
insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies,
shackle kit with earthing provision, copper winding, Power
factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air
delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS
5-1-8. : 374-2019), THD < 10%, compitible with electronic regulator 15 Ea. 2629.03
unit for Speed Control and all remaining accessories including
safety pin, nut bolts, washers, temperature rise = 75 degree C
(Max.), suitable for 140 to 285 Voltage and rectifier circuit with
surge, over current and overload protection , 50 Hz, Single phase
AC Supply, earthing etc. Complete as required.[ Make shall be
approved by Engineer in Charge]
(A) 1200 mm Sweep (48")
Providing & erecting Approved make Power Saving 50 Watt
Ceiling Fan with double ball bearing ISI mark with Condenser
5-1-6. volt A.C. 50 Hz 1200 mm sweep complete having 3blades with Ea. 1948.29 -
aluminium blades with , canopy & 30 cm. down rod erected with
earthing.(Make shall be approved by Engineer in charge))
Supplying and erecting 19 / 20 mm. nominal bore Medium Class
5-2-1. M.S. Pipe down rod erected duly painted for fan complete with 15 Mtr. 108.07
proper insulation without leakage and earthing.
Supplying & erecting fan hook box of 10 mm M.S. round bar
bounded to the RCC bars up to 50mm length each side and
pierced through a 16 Gauge M.S. box / Heavy Duty PVC box
complete erected concealed in Ceiling with necessary finishing.
Providing 2.5mm.thick laminated acrylic sheet to cover the fan
hook or Fan box.
Supplying & erecting single phase approved make industrial
exhaust fan suitable for medium duty ring mounted low noise
5-3-4. operation suitable for medium duty having following dia size and 3 Ea 2054.34
maximum speed in RPM
[A] 305 mm dia 900 RPM, Cat. III
5-3-6. Providing suitable M.S. louver shutter of the Exhaust fan. 0 Ea. 368.65 -
Providing & erecting fresh air fan 250 mm dia with square frame
make of ABS body with louvers, Cat. III
S.O.R. Description Unit Total
Qnty. Without GST
Supplying and erecting approved make oscillating type medium
duty bracket fan with Aluminium Blades A.C. 23OV. 50cy/s, with
thermal overload protection wall mounted with height
5-4-4. adjustment and rotary tilting device complete with guard, pull 0 Ea. 3518.44 -
cord for speed and oscillation flexible Core plug top complete
erected with lead wires as directed.
Supplying and erecting approved make oscillating type heavy
duty bracket fan with Aluminium Blades A.C. 23OV. 50cy/s, with
thermal overload protection wall mounted with height
5-4-5. adjustment and rotary tilting device complete with guard, pull 10 Ea. 7522.00
cord for speed and oscillation flexible Core plug top complete
erected with lead wires as directed.
E EARTHING SYSTEM
Providing and erecting required size HOT deep Galvanised iron
3-14-2 strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel 1 Kg. 77.77
board, Motors etc. using proper clamp.
3-14-4 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 1 Kg. 794.87
Providing and erecting HOT deep Galvanised iron strip wire 8 to
Providing and erecting Pipe type earthing having 150 cms. long
and 2.5 cms. dia. galvanised iron pipe with coupling and buch
buried in specially prepared earth pit complete with necessary
SWG earth wire.
Providing and erecting Pipe type earthing with 40 mm dia
mtr long 'B' grade G.I. pipe with necessary coupling buch buried
in specially prepared earth pit & G.I. earth wire of 8 SWG erected
& connected as directed
For using salt and charcoal / coke as required for pipe type
Supplying & erecting in earthpit of minimum bore dia. 225mm
size approved make Safe Earthing Electrode consisting Pipe-in-
Pipe Technology as per IS 3043-1987 made of corrosion free hot
dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200
Micron galvanising, Inner pipe dia of 40 mm having 200-250
Micron galvanising, connection terminal dia of 14 mm with
constant ohmic value surrounded by highly conductive
compound with high charge dissipation suitable for following
type of applications with chamber and heavy duty
cover.(approved make OEM has to submit test certificate
including value of earth resistane of installation.
[B] For Electrical installation up to 11 KV located in other than
normal soil i.e. Soft Rock, Marshy Soil etc.
-Length of Pipe : 2 mtr 0 Ea. 7095.25 -
-Back filling Compound :1 no. Bag of 25 Kg. two for body earth
and one for neutral earth
[C] For Electrical Installation covering Transformer Neutrals,
Lightning arrester Earthing, A.C.Plant & Sensitive Computer
System(like Automation, SCADA)i.e. independent Earthing
located in other than normal soil i.e. Soft Rock, Marshy Soil 1 Ea. 10593.89
-Length of Pipe : 3 Mtrs.
-Back filling Compound :2 nos Bags of 25 Kg.
S.O.R. Description Unit Total
Qnty. Without GST
F CABLES, WIRE AND TERMINATIONS
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable
multistrand Aluminium conductor for 1.1 KV. to be laid on wall
4-3-3. with necessary clamps or in existing trench / pipe of following
size of cables (From DISCOM energy meter to Main L.T. panel)
(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core) Mtr. 855.47 -
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable
multistrand Copper conductor for 1.1 KV. to be laid on wall
4-4-3. with necessary clamps or in existing trench / pipe at road
crossing or floor of following size of cables.
(A) 3 1/2 core 25 Sq. mm ( 10 Sq. mm 1/2 core) Mtr. 1586.71 -
Making trench in soft soil of suitable width of 90 cm deep for
4-5-1. laying cable or locating the fault all over the run and back filling 0 Mtr. 46.46 -
the same and making the surface as normal ground.
Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm.
below ground across the road crossing or on floor with necessary
material in an approved manner and making the ground as per
original. (F) 100 mm dia.
Providing & laying approved make Double walled corrugated
pipes (DWC) of polyethylene(conforming to IS 14930 II )with
4-5-8. necessary connecting accessories of same material at required 0 Mtr. 62.62 -
depth in existing trench for laying of cable. below ground /
road surface for enclosing cable, (A)50 mm outer dia
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable
multistrand Copper conductor for 1.1 KV. to be laid on wall
4-4-3. with necessary clamps or in existing trench / pipe at road
crossing or floor of following size of cables.
(A) 3 1/2 core 25 Sq. mm ( 10 Sq. mm 1/2 core) 10 Mtr. 1345.32
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable
multistrand / Solid Copper conductor for 1.1 KV. to be laid on
wall with necessary clamps or in existing trench / pipe at road
4-4-4. crossing or floor of following size of cables.
(A) 4 core 2.5 Sq. mm 0 Mtr. 269.67 -
(B) 4 core 4 Sq. mm 10 Mtr. 362.59
(C) 4 core 6 Sq. mm 10 Mtr. 508.03
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable
multistrand Copper conductor for 1.1 KV. to be laid on wall
4-4-5. with necessary clamps or in existing trench / pipe at road
crossing or floor of following size of cables.
(A) 4 core 10 Sq. mm 10 Mtr. 673.67
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable
multistrand Copper conductor for 1.1 KV. to be laid on wall
4-4-5. with necessary clamps or in existing trench / pipe at road
crossing or floor of following size of cables.
(B) 4 core 16 Sq. mm 10 Mtr. 984.75
Providing and, fixing heavy duty flange type brass double
compression type cable gland with rubber ring for PVC
4-6-3. insulated armoured cable complete with out going tails,
insulating tape etc for following size of cables.
S.O.R. Description Unit Total
Qnty. Without GST
Providing and, fixing heavy duty flange type brass double
compression type cable gland with rubber ring for PVC
4-6-3. insulated armoured cable complete with out going tails, Ea. 66.66 -
insulating tape etc for following size of cables.
(A) 3 & 1/2 / 4 core 25 Sq. mm
Providing and, fixing heavy duty flange type brass cable gland
with rubber ring for PVC insulated armoured cable complete
with out going tails, insulating tape etc for following size of
(B) 2 to 4 core 6 Sq. mm 1 Ea. 38.38
(C) 2 to 4 core 10 Sq. mm 1 Ea. 434.43
(D) 2 to 4 core 16 Sq. mm 1 Ea. 54.54
(E) 2 to 4 core 25 Sq. mm 1 Ea. 59.59
Solder less crimping type Aluminium lugs conforming to IS
suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved manner.
Solder less crimping type Copper lugs conforming to IS suitable
for cable of following size evenly crimped with high pressure tool
& connected to switchgear terminals with brass/cadmium plated
nut bolts in an approved manner.
Supplying & erecting approved make LAN cable of following size
in existing pipe as per direction [C] CAT -
G WATER COOLER AND PURIFIER
Providing and erecting water cooler having storage capacity
80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of
45˚ C. The outlet temp. of the water should drop by 15˚ C within
a hour, The water cooler should be comprising of hermetically
sealed compressor, fan motor, condensing unit, water tank
surrounded by evaporating coil, thermostats, relay etc. complete
with necessary inlet & outlet connection. The body of water
cooler will be made from Stainless Steel.
MR SITC of Water Purifire Eureka Forbs Make AG 200 or Equivalent 0 Ea. 11615.00 -
Supplying & erecting bank of all polypropylene condenser (APP
type) with standard capacity of 2,3,5,7, 10,12.5 & 15 KVAR units
of P.F. correction for operation on 3 phase 50 c/s, 400 /440V (+ /
8-15-1. - 10%) with externally discharging resistance, earthing terminal 0 Ea. 582.77 -
& built on angle iron of channel iron frame work and provided
with terminal cover box. Complete erected on provided iron
bracket or on floor duly tested by license.
H PUMP SETS AND STARTERS
S.O.R. Description Unit Total
Qnty. Without GST
Providing & erecting open well type horizontal mono block
pump set with stainless steel body having following
(D) 1 HP Three phase open well motor pump set suitable for
LPM discharge @ 21 mtr. head, suitable for 32mm dia. delivery
Supplying submersible pump set suitable for bore of 100 mm.
dia. or more having three phase motor capacity not more than
H.P. of different range with following capacity
(A) (20 stage) 170 to 185 LPM discharge at 57 to 48 mtrs.
Respectively head suitable for 50 mm dia. delivery pipe, Cat. III
Supplying & erecting approved make self-priming domestic
monoblock water pump with 1 H.P motor, suitable for
operation on 230 volts, 50c/s. AC supply with metallic flange,
and M.S. impeller delivery and following discharge
(a) 40 LPM at 24 mtrs. head suitable for 25mm dia. Delivery.
Supplying and erecting push button operated fully automatic
Star-Delta starter with 3 Nos. of 15A.rating contactors and
directly operated thermal overload relay having 10-21A range
9-1-5. and erected in sheet steel enclosure for 3 phase 415V. 50 c/s.
A.C. motors from 7.5 to 15H.P. complete erected on
(A) P.W. Block with necessary connection, Cat.III Ea. 10483.80 -
(B) Angle iron frame add to the above Ea. 204.02 -
Supplying and erecting Direct On-line Electronics Starter with 2-
5/4-10/8-14/10-16 Amp. Rating relay (variable current setting)
directly operated in totally insulated elegant enclosure and
Amp. Rating power relay with start - stop button for single phase
operation up to 3 HP as per complete erected on P.W. Block with
following features.
Low voltage cut off below 140 V
High voltage cut off above 280 V
Overload protection
Indicating LEDs for motor on lv, hv & overload tripping. [Cat.II]
Supplying and erecting Direct-on-line, Starter with 15A.rating
contractor and with 4-14A. range, directly operated thermal
9-1-3. overload relay in sheet steel enclosure for 3phase 415V.50 c/s. 2 Ea. 2046.26
A.C. motor up to 7.5 H.P.complete erected on P.W. Block with
necessary connection. Cat.III
Supplying & erecting approved make Automatic liquid level
controller 6A. with sensor testing as per instruction of Engineer
9-5-1. in charge on site complete with wiring connection with existing 1 Ea. 2355.32
wires , with copper conductor from pump to upper and lower
Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB
with 20 Amp. Plug socket, company fabricated powder coated
3-10-6-A sheet steel enclosure erected as directed with connection.
[A] Metal Clad Socket with metal clad top. Cat.III 1 Ea. 527.22
[B] 15 Amp. / 5 Amp. Five pin Universal Socket Cat.III 1 Ea. 660.54
S.O.R. Description Unit Total
Qnty. Without GST
Supplying and erecting, commissioning and testing of Diesel
Generating set confirming to IS: 4722:1968 & BS:5514 having
continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply
comprising of a totally enclosed air/water cooled diesel engine
with multi-cylinders developing suitable BHP not less than
following capacity at 1500 RPM with 10% overload for one hour
in 24 hours with standard accessories like fly wheel, lubricating
oil cooler, "A" class governor, heavy duty fuel wheel and
lubricating oil filter, oil bath air filler, lubricating oil pressure
gauge, end exhaust manifold, standard set of tools with
adjustable spanners, screw drivers, cylinder head to cover, joint
cylinder head to exhaust, element lube oil filter, 12 / 24 volts
electric starting equipment complete with standard heavy duty
battery, dynamo, cut-outs, ammeter, necessary wiring, pressure
gauge, starter etc and heavy duty Residential type exhaust
silencer and vertical hot air duct both
logged with asbestos rope, save oil trays, exhaust piping of
required length, standard wall/floor mounted fuel with level
indicator and piping and drip proof alternator, self excited, self
regulated, screen protected, with excitation system, capable of
delivering the rated system output at 415 volts, 3 phase, 0.8 PF,
50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722-
with voltage regulation +/- 5% of rated voltage from no load
to full load. Both the engine and alternator fitted on a common
fabricated steel base plate with antivibration mounting engine
and alternator both connected to each other by flexible flange
coupling and with floor/wall mounted control panel box
comprising of voltmeter ammeter, selector switches, ACB /
MCCB / MCB of adequate capacity,
indicator lamps duly wired with HRC fuses. The alternator &
control panel shall be connected with provided suitable capacity
armoured cable and complete with Acoustic enclosure (canopy)
made out of 16 SWG CRCA Sheet, sound absorbing material
Rockwool of 64 density & 100 mm thick conforming to IS:8183 /
PU Foam of 40 Density - at least 40 mm. The resin bonded
rockwool covered from inside the canopy by perforated sheet
with 3/4 mm holes, sound level not more than 75 dB at a
distance of 1 mtr, as per PVCT norms. Erection, commissioning
and satisfactory testing as per requirement with first filling of
fuel, oil, etc. with guarantee / Warrantee of complete system for
Two years. & with obtaining all necessary certificate from
Electrical Inspector. The Capacity and Ratings of DG sets are as
(H) Continuous Rating of 50 KVA ,BHP not less than 65.8 BHP
S.O.R. Description Unit Total
Qnty. Without GST
Providing & erecting approved make AMF control panel suitable
for following size of 3 phase, 415 V., 50 cycles, A.C. diesel
generating set complete of scope as detailed below:
1) Power module: A pair of electromechanically interlocked
contactors (for mains & generator) Overload relay for generator
contactor Neutral contactor for mains and generator Power
socket for connections.
2) Control and metering module: Line voltage monitor.
Generator voltage monitor Ammeter 3 items attempt start
10-4-3 facility. Air circuit breakers/MCB/MCCB of suitable rating for
auto/manual operation. Auto/manual switch. Emergency stop
push buttons. Manual start push button. frequency meter.
Engine hour meter. Two earthing studs.
3) Protection module: The engine shutdown in the unlikely event
of Low lube oil pressure High cylinder head temperature. V belt
4) Indicators with alarm Load on generator.
5) Indicators Load on mains Engine fails to start . Emergency stop
battery charger.
The AMF Panel of following capacity
(A) AMF Control Panel for 50/62.5 KVA 3 phase DG Set 0 Each 97320.57 -
(A) GENERAL DESCRIPTION OF LIFTS.
[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift
3 phase 440 V A. C. Permanent Magnet Synchronous motor of proper
rating with high efficiency shall be used.[2] Micro processor based /
PLC, ACVVVF, vector control drive with encoder feedback closed loop
system shall be used for lift car and door operation which shall be full
collective selective operation hall call demand response, UP/DOWN
hall stops, Main, Up/ Down Contactor with overload and phase
reversal relay and safety controls.
[3] Car with M S platform with bracings of adequate size and to sustain
the impact load cabin + passenger with safety factor of fire for steel
and side panels of Stainless steel of sheet of grade 304 duty. Car
ceiling will be S.S. finishes with aesthetic appearance with LED ceiling
lights. Car flooring shall be of anti skid PVC with choice of colour of
engineer in charge. Car doors shall be of stainless steel grade
hairline finish with centre opening / telescopic automatic doors. Car
panel will also be S.S. 304 finished with emergency stop device,
mechanical door safety device, facility of auto/ attended mode. All car
panel buttons and all floor switches must be with brail language as per
S.O.R. Description Unit Total
Qnty. Without GST
[4] All landing doors must be fire rated for 2 hour shall be fully
automatic centre opening/ telescopic opening made of hairline finish
steel grade of 304 with key holes and infrared curtains with Unlocking
facility from outside
[5] Appropriate battery operated emergency light in the car along with
alarm switch shall be provided. Also, Emergency Light & Fan should
start immediately without any Time Delay as soon as power fails.
[6] Digital scrolling indicator system for up-down arrow along with
floor position indicator shall be provided inside the car and at all
[7] Full height infra red curtain with multiple cross / crossing light
beams shall be provided.[8] Automatic Rescue Device (ARD) shall be
provided accordingly of passenger capacity with Manual Rescue
Operation ( Manual Cranking Facility).
[9] Audio visual indication in the lift car showing over loading shall be
provided such that doors kept open till excess load is removed.
[10] Spring buffers/PU Buffers shall be provided.
[11] Car fan as per passenger capacity with automatic sleep timer shall
[12] Voice annunciator with suitable music shall be provided in lift car.
[13] Self diagnostics system for operational and safety parameters
shall be provided in control panel.
[14] Mechanical over speed governor with governor calibration as per
actual site parameters and submission of calibration certificate
submission, door key holes in the floor doors, fireman switch shall be
[15] Lift machine hoisting arrangement in the lift machine room and
monkey ladder for lift pit should be provided by the lift agency, along
with the other steel structure works, foundations for the machine
[16] In the hoist way fascia plate shall be provided without any extra
cost, where ever required as / if directed by engineer in charge.
[17] Permanent wiring with necessary safety devices like RCCB in all Ea. #REF! -
13-1-AP circuit, Over Voltage Under Voltage protection and THD eliminator in
circuit for lift machine room and lift well with proper numbers of light
points, with fixtures, exhaust fan and plug points shall be provided by
the agency. Only 3 phase Power Supply shall be made available by
department in lift machine room. Necessary Earthing as per Lift
Act/Rules shall be arranged by Lift Agency.
[18] Any civil/ electrical works for additional and alteration in lift shaft
and machine room related to erection of lift shall be made by lift
agency without any extra cost. (granite/marble fixing around all
landing door openings are not in lift agency’s scope.)
[19] Agency has to provide all working drawings and documents and
liaison services for obtaining all necessary permission from lift
inspector and other authorities. [20] acrylic transparent
licence/display A4 size holder in lift car
[20A] As per statutory requirement of Govt. Of Gujarat lift &
escalator act 2000, lift agency has to provide
1. Car top safety barricade
2. Push & talk communication system.
3. Fireman's switch operation at Ground Floor.
4.carrying out third party lift inspection during/after lift erection
and provide report by third party authorized by concern
licensing authority
5.agency has to provide third party insurance upto completion of
free maintenance period and submit the document for the same.
S.O.R. Description Unit Total
Qnty. Without GST
[21] Car Panel Operating Buttons with floor position
indicator/buttons must be of Auto Glow type clearly visible when
view from inside cabin.
[22] For Physically Handicapped person Full Length Handrails of
hairline finish steel grade of 304 should be provided at
appropriate height on the Rear & Side Wall Panels in Lift Car.
(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM
1. Advanced control system dual 64 bit embedded microprocessor
with CANBUS Serial Communication mode including Regenerative
power efficient operation,on site programming facility, Anti nuisance,
Pte-opening, BMS/RMS with necessary online real time monitoring
system having necessary connectivity for remote monitoring & other
suitable supporting hardware & software devices to fulfil the purpose.
2. Floor Indication LCD Display with call registration & brail mark
with arrival gong and hall lantern & TFT Screen in the car with
MP3 Voice Announcer.
3. CAR Panel should be Scratch resistive SS Moonrock finish /
Hair Line / Honeycomb for car and all Doors, All landing doors
must have fire rating up to 2 hours and car door must have multi-
level crisscross beam door protection.
4. To & fro communication system & wiring (i.e. car , control room &
guard room ) and Each elevator are equipped with remote monitoring
system.agency has to provide mobile app and user id and password
15/16 Passengers, Ground plus 2 upper floor with Rated Speed
of 1.0 m/sec., (strecher lift)
(C) With General PLUS ADDITIONAL SPECIAL FEATURES attached
herewith. Prem. Cat.
J INVERTOR STABILIZER
Supplying and erecting of 1850VA Sine wave Digital Inverter
Supplying and erecting of 12V/150AH Tubular battery for 1 hrs
battery backup.
MR Supplying and erecting of 1KVA Stabilizer. Ea. 10225.64 -
Supplying and erecting approved make online Un-interruptible
Power Supply system comprising flat cum-boost charger, static
Inverter & sealed maintenance free SMF batteries. The charger
having operating capacity for input 160-270V AC & inverter
having output 230V,50 Hz Ac with 0.8 load power factor with
8-15-5. battery, over/under voltage output with over load & short circuit 0 Ea. 24822.77 -
protection equipment. The system housed in CRC sheet duly
powder coated paint with following power backup.with MS
painted batteries stand, 10% Overload capacity for momentary
load. (FOR class room)
(A) 1 KVA with 1Hr Backup
Wall Mount Speaker
S.O.R. Description Unit Total
Qnty. Without GST
SETC of Philips/Ahuja Make or equivalent
High power ABS wall mounting box speaker in gray colour for
indoor public address and background music in locations of high
MR ambient noise. Ideal for Schools. 0 Ea. 2152.19 -
Input Power : 25W RMS
Power Tapes on 100V : 25/15/10/5W
Impedance : 400/670/1k/2kΩ
Frequency Response : 120-15,000Hz
SPL at 1kHZ (1W/1m) : 94dB
SETC of Philips/Ahuja Make or equivalent
High Wattage PA Mixer Amplifier
6 Mic & 2 Aux Inputs.
Preamplifier and Line Output for connecting to a Booster
Amplifier and for recording the programme.
Line Input for connecting the output from any external mixer or
permitting to be used as a Booster Power Amplifier.
Resettable circuit breaker for protection against overload and
Instant transfer to DC power (Car Battery) if AC power fails.
Box Speaker/Driver Unit selector switch. Bass boost defeated at
Driver Unit position for safer operation of driver units.
Power Output : 300W Max., 250W RMS at 10% THD, 220W RMS
at 5% THD, 200W RMS at 2% THD
Output Regulation : ≤ 2 dB, no load to full load at 1kHz
Input Channels : 6 × Mic 0.65mV/4.7kΩ, 2 × Aux 100mV/470 kΩ,
1 × Line 1V/50kΩ
Frequency Response : 50-15,000Hz ±3dB
Signal to Noise Ratio : 60dB
Tone Controls : Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Outputs : Preamp 200mV/600Ω, Line 1V/1kΩ
Speaker Outputs : 4Ω, 8Ω, 70V & 100V
Digital Player : MP3 Player with USB, SD and MMC Card Reader
Power Supply : AC: 220-240V 50/60Hz
Power Consumption : AC: 460VA DC: 6A
Unidirectional Dynamic Microphone
SETC of Philips/Ahuja Make or equivalent
Multi Purpose Applications
All purpose PA microphone reproducing intelligible, crisp and a
Suitable for multi-purpose PA installations. 0 Ea. 3037.95 -
Supplied with quick detachable holder with 3-pin professional
XLR connector & 6 mtrs. twin core shielded low noise cable.
Frequency Response : 50-15,000Hz
Sensitivity : 2.2mV/Pa
Impedance : 500Ω
PA MICROPHONE STAND
SETC of Philips/Ahuja Make or equivalent Microphone stand
employ sturdy mechanism ensuring trouble free movement and
positioning of microphone. These stands are functional and
resistant to rust, due to superior quality of chrome
MR plating/powder coating. stand with 5/8” 27 TPI to match all 0 Ea. 2109.48 -
Type : Floor Stand
Height : 920-1500 mm
Base Dia : 230 mm
Weight : 4.60kg
Speaker Wire (Copper)
SETC of 1.5 Sq.mm. 2 Core Oxygen free Copper Speaker Cable
S.O.R. Description Unit Total
Qnty. Without GST
Providing and erecting ISI mark Medium class RIGID PVC PIPES
of following size complete to be erected on/in wall or ceiling
1-3-2. erected with necessary PVC fittings & Junction boxes fixed with 10 Mtr. 23.23
adhesive solution & Clamps with following dia of pipes, in
approved manner as directed. (a)20 mm
CAMPUS LIGHTING
Total Amount Of Electrical Work
Total Amount Of Electrical Work
(A) Total amount up to plinth
(A) Total amount up to plinth
(B) Total amount above Plinth
(B) Total amount above Plinth
(C) Total amount of water supply & sanitary
(C) Total amount of water supply & sanitary
Total Amount Of Electrical Work
Total Amount Of Electrical Work
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
TP47_FP18 Community Hall_Technical Bid.pdf
TP47 FP18_Community Hall_price bid.pdf
Download all tender documents and submit your bid