Providing shed for keeping electrical ornamental designs and health department store at Sri KVS Temple, Srinivasamangapuram(Electrical)

Supply and Fixing of ISI mark 20mm outer dia medium grade (1.55mm thickness) with IS:9537 part -3 P.V.C. pipe for concealed wiring in new / existing brick building, walls, columns, beams duly cutting them to the required depth wherever necessary and fixing the pipes and specials with nails and plastering neatly with cement mortar and colour washing to match the finished surface and masonry work for light, fan and separate plug point including all labour charges etc., complete. Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal

Supply and Fixing of ISI Mark 25mm outer dia medium grade (1.80mm thickness) with IS:9537 part -3 P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles for surface wiring on Brick / stone walls, RCC roofings,Trusses, channels including all labour charges etc.,complete. (If PVC Pipes are fixed on russes/Channels with MS Clamps, the rate for MS Clamps will be paid Separately) Makes:Sudhakar/Finolex/Polycab / Kumar / AKG /Indian-tubes /GM / Anchor/ Nandi / Polyline / Gold Medal

Supply and Fixing of ISI mark 25mm outer dia medium grade (1.80mm thickness) with IS:9537 part -3 P.V.C. pipe for concealed wiring in new / existing brick building, walls, columns, beams duly cutting them to the required depth wherever necessary and fixing the pipes and specials with nails and plastering neatly with cement mortar and colour washing to match the finished concealed and masonry work for light, fan and separate plug point including all labour charges etc., complete. Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal

Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with 2 plate Jumbo ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings. Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Grade-A: Modular Switch Makes: Legrand Arteor / Schneider Zen cello / Gold Medal / GIFA / L&T englaze / Crabtree - Murano / Amare / Ducor / GM Four-Five

Supply and run of 3 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 3 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 5 wire of 84/0.3mm (6.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and fixing of 6 /10 Amps 1 way 1 module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 6 /10 Amps 3 / 2 pin 2 module Modular Socket with shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 16 /20 Amps 1 Way 1 Module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 20 Amps 1 Way 1 Module Modular Switch with Neon Indicator on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 100 W Fan Step Regulator of 2 Module on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 3 Modular Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 6 Modular Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 12 Modular Vertical Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five

Fixing of Ceiling fan including transportation and giving connections with twin core wire etc., complete.

Supply and fixing of 8 Way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly concealed in the wall with neat plastering etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 6 to 32 Amps range S.P MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

supply and fixing of 40 to 63 Amp TP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply & fixing of 1 1/4" dia 'B' class GI pipe not exceeding 1.5Mtr long with necessary bending (120° to 135°) to the wall or to the pole as directed during execution duly grouting 2 Nos. of MS angles of 35x35x5mm having length 20Cm (grouted portion of MS angle into the wall 7.5cm) and fixing with 2 Nos. of MS clamps fabricated with 25mmx3mm MS flat with suitable holes and 4 Nos. of 3/8"x2" MS bolts, nuts & washers for fixing on the wall / 2 Nos. of suitable MS clamps with bolts, nuts for fixing to the pole etc., complete.

A 16 Amp fuse unit is to be fixed to the MS angle / clamp and giving necessary connections with 14/0.3mm PVC copper flexible wire from pole to the fuse unit and to the fitting or from Ceiling rose in the building to the fuse unit and to the fitting with link clips etc., and the GI pipe has to be painted with two coats of enamel grey paint over one coat of red oxide paint. Fixing charges including the cost of MS angle, MS clamps, bending of pipe, bolts, nuts, fuse units etc.

Supply and fixing of 155 X 210 X 92mm Sizes thermo plastic cable junction boxes with IP66/67 weather proof, for outdoor installation with konckouts for cable entry including 2 Nos. 6 to 32A SP MCB & terminals etc., complete (sizes in mm) Make : Hensel / Sadhrish / Sintex

Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete.

Supply Laying and Transportation of Outer dia 50mm and inner dia 38mm, 6Kg/Sq.Cm (PE- 100 grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make: DURA LINE (Dura Guard) or its equivalent make.

Supply of 1.5 Sq.mm x 3 Core Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Finolex / RR Kabel / Polycab / Havells / KEI / Gloster.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) upto 16 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc upto 16 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 10 Sq.mm to 16 Sq.mm on walls etc. including all labour charges etc., complete.

Supply and fixing of 3 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Supply and fixing of 6 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Supply and fixing of 12 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete.

Cutting open cement concrete road

Cement concrete using 20mm HBG metal in CC (1:3:6) laid in Layers of not more than 15cms thick well compacted including curing cost and conveyance of materials etc., complete.

Supply and Fixing of 4 feet T5, 18W LED Batten type fitting with Internal driver with Polycarbonate housing & PC diffuser suitable to operate on 230V AC, 50 Hz power supply as per the following specification. Make: Philips / Osram / Havells / Crompton Greaves / GE / Orkus. Specifications: 1. Input Power: 18W ±5% 2. Input Voltage and Frequency:230V ±5% AC, 50Hz. 3. Power factor : >0.95 4. THD % : <15% 5. Operating Voltage : 140 - 270VAC 6. Surge Protection : ≥ 2.5 kV

7. LED make: Nichia (Japan)/ Osram (German) / Philips Lumiled/ Cree (USA) / Bridgelux(USA) / Seoul / Lednim / Everlight / Epistar / Edison. 8. Luminous Flux (Lumen) : 1800± 5% 9. Luminous Efficiency (LM/W) : 100 ±5% 10. Colour Temperature (K): 5500K to 6500K 11. CRI : ≥ 80 12. LED Beam Angle : >150º 13. IP Grade: IP20 Warranty : 5 Years.

Standards Applicable: IS: 10322 Part-5, Sec-3. Manufacturers internal Type Test Reports. (Excluding GST)

Supply of 75W LED Day light integral IP 66 street light / Road light fitting with pressure diecast aluminium body suitable for mounting to the existing poles with 50mm to 60mm outer dia bracket (adjustable stem pipe) with suitable capacity of isolation constant current driver. The luminaire shall be with Lense for distribution of lighting and suitable to operate on 230V, 50 Hz AC supply as per the following specification.

Make: Phillips / Crompton Greaves /Wipro / KLite / Halonix / ORKUS / Havells 1. Output Luminous :7500 Lumens +/-5% 2. IP grade : IP 66 3. Material for glass toughened glass 4. Material for LED engine: metal core PCB 5. Working temperature: 0 C to 50 C 6. Working humidity : 10% to 90% relative humidity 7. Working life: > 50000 hours 8. LED make: NICHIA (Japan)/OSRAM (German) / PHILIPS LIMITED/ CREE(USA) /BRIDGELUX(USA) /SEOL / LEDNIM /EVERLIGHT / LED / EPISTAR / EDISON 9. LED operating current: 700 mA 10. LED efficiency:>135 lm/w 11. Luminaire efficiency: Not less than 100 Lumens / W +/- 5%

12. Total system wattage:75W +/-5% 13. CCT: 5500K - 6500K 14. CRI : >70 15. Input voltage and frequency :230-240V AC, 50 Hz +/- 3 Hz 16.Operating voltage:140V-270V AC universal Electronic Driver 17. Input current : ≥300 mA 18. Power factor:>0.95 19. Driver efficiency: >90% 20. THD : < 10% 21. LED drive current: 700mA 22. IEC/IS Applicable for Luminaire: IEC60529

Supply of 1400mm ( 56" ) BLDC ( Brush Iess Direct Current ) Ceiling fan with double bearing to operate as 230 V , Single phase, 50 Hz AC Supply. including transportation. Specifications: Model - Atomberg - Efficio - 1400 mm ( 56"),35 W. Sweep : 1400 mm ( 56") Type of motor : Brush less DC ( BLDC) Rated voltage : Single phase, 230V AC Rated Frequencey : 48 - 52 Hz BEE labellin / Star rating : 5 Star Operating Voltage range : 110 to 290V AC Power factor : 0.99 Service Value : 7.8 CMM /W Thermal Harmonic Distortion (THD) : Less than 10 o/o ( THD) Air delivery i 272 CMI!1 (m3/mm ) Rate power : 35 W Motor speed : 275 RPW with speed control No of Poles : 14 Poles with 7 Magnets Stataor Winding Gauge : 22 SWG Bearing : Double ball bearing No of baldes : 3 Type of blade leaf : 1.1 mm thick alluminium sheet Down rods size ( without shackels ) 260 mm Operating temparature : With in 2 degree of ambient Class of inculation:ClassB Warranty : 3 Years on site Speed Control : Regulator Compatible Colour : White /Ivory /Matt brown Make :Atomberg / Havells / Crompton / TTD Approved brands

Supply of 80 mm dia G.I. pipes of "B" class of ISI marked and approved by the department including cost and conveyance and all other incidental charges etc., and properties and weight as per IS 1239 marked . Make: Jindal / Appollo / TATA.

Providing of Independent Chemical Earthing after excavating an earth pit of size1.5 m X 0.9 m X 2.05 m(Top 1.50 m X 0.90 m X 0.9m & bottom 1.20 m X 0.90 m X 1.15 m) with the following specification:-

(a) The Earth Electrodes, 40mm dia, wall thickness 3.25 mm, terminal Size 25x8 mm, terminal hole dia 12 mm, 2 meter long, galvanized, including 1 bag (25Kg to a bag) of Earth Life Compound, as per IS 3043, Base Metal: IS marked branded mild steel pipes. Makes: Potential / Shake Hands / Mars / Tirumala / Arshlok earthing.

b) The Earth Electrode shall be inserted into the ground for 1.75 Mtrs. Below the inspection chamber bottom 300mm all around this Earth Electrode shall be covered with 25 Kgs. Of Earth Life Compound (c) The excavated gap shall be back filled with excavated earth, and shall be properly consolidated with water. (d) The top 0.25 m of Earth pipe shall be exposed into inspection chamber of Hume pipe . The all around inspection chamber shall be provided with 18" dia hume pipe. Earth connections shall be given to the Earth Electrodes with bolts, nuts & washers. (e) A 65 mm dia PVC conduit is to be embedded through hume pipe at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth, the pit entry PVC conduit is to be sealed with Bitumen compound. (f) Necessary Meggar testing is to be done in the presence of the concerned Engineers, and the reading should be as per IE standards.

Supply and run of 25 mm X 3 mm G.I Strip for earth electrode to required places by concealing in walls, flooring by cutting the grooves and replastering neatly and giving necessary connection with 3/8"x2" GI Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.

(Rupees One Lakh Sixty Nine Thousand One Hundred Thirty Six and Paise Thirty Eight only)