Construction of New Farmer Training Centre at Rajpipla, Dist. Narmada

Name of Work : Construction of New Farmer Training Centre at Rajpipla, Dist. Narmada

BILL OF QUANTITIES

Item Description of Item (with brief specification and reference to book of

No. specifications) Quantity Unit Rate Amount

1 Excavation for foundation up to 1.50 MT depth including sorting out and stacking of

useful materials and disposing the excavated stuff up to 50 mt lead (A) Loose & soft 1486.00 Cu.M 125.86

2 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out

and stacking of useful materials and disposing off the excavated stuff upto 50 1179.00 Cu.M 309.04

Meter lead. (D) Soft rock not requiring Blasting

3 Filling available excavated Earth (Excluding Rock ) in trench plinth side of foundation

etc. in layer not excluding 20 cm in depth consolidation each deposited layer by 1427.00 Cu.M 137.47

ramming and watering etc. complete

4 Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete. 1179.00 Cu.M 305.23

5 Providing and laying cement concrete 1:4:8 (1cement : 4 coarse sand : 8 B.T. stone

aggregates 40 mm. nominal size) and curing complete excluding cost of from work in 199.00 Cu.M 2825.98

:(a) Foundation and plinth

6 Providing and laying controlled cement concrete M150 for curing complete including

cost of formwork but excluding the cost of reinforcement for reinforced concrete

work in (A) Foundations, footings,Base of columns,Plinth Slab and Mass concrete. 236.00 Cu.M 3792.55

7 Providing and laying controlled cement concrete M250 for curing complete including

cost of formwork but excluding the cost of reinforcement for reinforced concrete 306.05 Cu.M 4460.16

work in (A) Foundations, footings,Base of columns and Mass concrete.

8 Providing and laying controlled cement concrete M250 and curing complete including

the cost of form work but excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts Column Up to Plinth Level 51.00 Cu.M 7841.64

9 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars, posts and struts up to floor two level 96.00 Cu.M 7800.36

for Columns For All Floors.

10 Providing and laying controlled cement concrete M250 and curing complete including

the cost of form work but excluding the cost of reinforcement for reinforced concrete 77.00 Cu.M 5883.25

work For Plinth Beams

11 Providing and laying controlled cement concrete M200 and curing complete including

the cost of form work but excluding the cost of reinforcement for reinforced concrete 252.00 Cu.M 6196.11

work in BEAMS For All Floor.

12 Providing and laying controlled cement concrete M200 and curing complete including

the cost of form work but excluding the cost of reinforcement for reinforced concrete 248.00 Cum 6490.81

work for Slab All floors

13 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 50.00 Cu.M 7450.37

reinforced concrete work For Lintels & Sill Level in All Floors

14 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 21.00 Cu.M 6319.57

reinforced concrete work For Chajja in All Floors

15 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 9.00 Cum 8378.96

reinforced concrete work in STAIR CASES for All floor

16 Providing TMT bar reinforcement of Fe-500D for R.C.C. work including bending

binding and placing in position complete for All Floor 153092.00 Kg. 78.05

17 Proving & Fixing Chicken mesh for joint between brick work & RCC work fixing with

nail & GI washer as per director in Charge 566.00 Sq.M 75.00

18 Brick Work using Common Burnt Clay Building Bricks having crushing strength not

less than 35 Kg/sm. in super structure Above plinth level up to floor two level in

cement mortar (1:6) ( 1 cement : 6 fine sand) (Conventional) For All Floors

19 Half brick masonry in common brunt clay building bricks having crushing strength

not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

super structure above plinth up to floor two level Conventional Bricks for All 225.00 Sq.M 696.90

20 Providing throating or plaster drip and moulding to R.C.C. chhajja by making 5mm to

15 mm wide groove as per design etc. complete 217.00 Rmt 44.07

21 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single

or half brick walls for interior plastering upto floor two level and finished even and 2107.00 Sq.M 185.94

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

22 Providing 10mm thick cement plaster (mala troweled finish) in single coat on

Celling,& Soffits of Stair, concrete wall for interior plastering finished even and 2731.00 Sq.M 188.19

smooth in (ii) cement mortar 1:3 (1 Cement : 3 Sand) For ALL Floors

23 20 mm thick Sand faced Gutka cement plaster with 1x1 cm grooves as suggested by

this office consisting of 12 mm thick backing coat of C.M. 1:3 ( 1 cement : 3 coarse

sand ) and 8 mm thick finishing coat of C.M. 1:1 ( 1 cement : 1 coarse sand) for all 1221.00 Sq.M 360.57

heights as directed etc. complete.

24 Providing Water proofing Treatment on Sunk Slab including cement concrete flooring

1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm nominal size) laid

in one layer and finished with a floating coat of neat cement average 50mm thick to 452.00 Sq.M 373.70

Prepare slope including water proofing chemical etc. Complete for Sunk Slab All

25 Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. Length for Sunk

Slab or as directed by Engineer in Charge etc complete. 7.00 No 101.91

26 Applying two coats of Birla or Asian (or equivalent) acrylic lapy ( putty) & two coats

of primer of approved brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar dropping and other 4875.00 Sq.M 40.59

foreign matter and sand papered smooth.

27 Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand 2107.00 Sq.M 84.82

papered smooth.

28 Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on ceiling and soffits of slab surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign matter 2663.00 Sq.M 90.48

and sand papered smooth.

29 Wall painting two coats with weather proof acralic emulsion APEX type paint of

approved brand & manufacture and of required shade on exterior wall surface to

give an even shade over and including a primery coat with alkaly resistance primer of 1218.00 Sq.M 122.14

approved brand after throughly brushing surface to remove all dirt and remains of

loose powdered materials etc comp. for all height.

30 P & L 60 X 60 cms. vitrified 8 mm thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of existing flooring and jointed 689.00 Sq.M 1472.91

with color cement slurry including finised with flush pointing & cleaning the surface

etc. complete for Antiskid

31 Providing and laying 60 X 60 Cms. Vitrified tiles 8 to 10 mm thick , in skrting risers of

steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and 34.00 Sq.M 1205.60

jointed with white cement slurry complete for Antiskid

32 Providing and fixing Machine cut & Polished kota stone in 7.5 CM width Strip flooring

for Ramp even grade over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) laid over and jointed with grey cement slurry mixed with 12.00 Sq.M 1154.43

pigment to match the shade of slab including rubbing and polishing etc. complete. (A)

33 Providing and laying coloured matt finished Anti skid ceramic tiles of the size 300 mm

x 300 mm in skirting, risers of steps and landing laid on a bed of 12 mm thick cement

mortar 1:3(1-cement:3-coarse sand)finishing with flush pointing in white cement etc. 129.00 Sq.M 1017.30

complete. Colour and Shade approved by Engineer-In-Charge

34 P & L Premium Printed glazed tiles size 30 x 30 cm 6 mm thick in skirting risers of

steps and dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and 434.00 Sq.M 1523.67

jointed with colour cement slurry

35 P & L Coloured glazed tiles size 30 x 30 cm 6 mm thick in skirting risers of steps and

dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and jointed with 35.00 Sq.M 1523.67

colour cement slurry

36 P & L Coloured glazed tiles size 30 x 45 cm 6 mm thick in skirting risers of steps and

dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and jointed with 197.00 Sq.M 1523.67

colour cement slurry

37 Providing and fixing 60 x 45 CM Machine cut, free edges, mirror polished Blue Kotah

stone slab flooring 25 mm thick laid on 20 mm thick cement mortar 1:6 ( 1 cement:6

coarse sand) jointed with matching pigment & cement slurry including rubbing and 289.00 Sq.M 1189.78

polishing finishing etc. complete.

38 Providing and fixing 60 x 45 CM Machine cut, free edges Blue Kotah stone slab

flooring 25 mm thick laid on 10 mm thick cement mortar 1:3 ( 1 cement:3 coarse

sand) for Skirting & Riser including jointed with matching pigment & cement slurry 62.00 Sq.M 1205.60

including rubbing and polishing finishing etc. complete.

39 Providing and laying water proofing treatment with china mosaic tiles flooring over

avg 50 mm C.C. 1:2:4 bedding for maintaining slope for plain and curve surface &

mm to 20 mm of broken piece not more than 2.5CM of ceramic / glazed tiles ( one

for more colour as directed ) to be laid over cement mortar bedding of C M 1:3 (1

cement : 3 sand ) contain water proofing materials per bag of cement useas specified

by manufactured and slops to be tempered to bring mortar up to surface with using 972.00 Sq.M 1164.53

white cement and colour pigment including rounding of junctions and extending

them up to 15 cm along the wall and curing with bends any patens or design as per

drawing and cleaning by using oxalic acid etc. complete.

40 Providing and fixing machine cut, free edges, pre mirror polished Grenite Marble slab

18 mm thick (single piece not less than 150 cm ) for vertical wall/Doors/Windows

Sill,Jams for cladding as per design including full moulded round inside edge and

laid on 10 mm thick cement mortar 1:3 ( 1 cement: 3 coarse sand) jointed with grey 283.00 Sq.M 2425.01

cement slurry including rubbing and polishing finishing etc. complete.

41 Constructing Sandwich Platform of 18 mm thick Polished Black or selected Granite

at top and 25 mm thick Kota stone slab With 75CM height with necessary Support

using 20mm thick cement mortar 1:3 for sandwich and fitting at bottom & edges with

waterproof rigid adhesives including making necessary grooves in walls with

Vertical support of double Kota stone sandwich every 60 cm centre to centre 4.00 Sq.M 3671.35

including all labour material of approved quality including full moulded round front

edge fixed in wall for partition and jointed with grey cement slurry including

rubbing and polishing etc. complete

42 Providing and Fixing of Door Frame of Granite Stone with flat Edge polished with

standard extruded Coloured Anodized Aluiminimum Section main Frame outer size

127 mm X 38.10 mm X 1.35 mm (Wight :- 1.384 kg/Rmt) openable shutters and

mm thick Double shutter Flush Door Solid Core Finished with 1 mm thick Lamination 17.00 Sq.M 4264.22

on both side Colored and Pattern Approved by this office with fixed Glazing on sides.

Door shall be Provided with Floor Spring and 60 Cm. Long S.S. Handle And other S.S.

43 Providing and Fixing of Door Frame of Granite Stone with flat Edge polished with

standard extruded Coloured Anodized Aluiminimum Section main Frame outer size

127 mm X 38.10 mm X 1.35 mm (Wight :- 1.384 kg/Rmt) openable shutters and

mm thick Single shutter Prelaminated Flush Door 35 mm thick Solid Core Finished 92.00 Sq.M 4441.98

with 1 mm thick Lamination on both side Colored and Pattern Approved by this office

with fixed Glazing on sides. Door shall be Provided with Floor Spring and 60 Cm.

Long S.S. Handle And other S.S. Fixtures.

44 Providing and fixing Single Shutter FRP frame size 100x50 mm and 35mm thick FRP

depress panel shutter having extra reinforcement on sides & edges in Gel coat finish.

The core of the shutter & frame is to be filed up with injected fire retardant grade

polyurethene foam done in situ alongwith embedded wooden pieces for stiffening &

also taking hinges & fintures. The whole FRP frame & shutter is to be water proof 40.00 Sq.M 2781.54

weather proof, termite proof & resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with necessary screws & alluminium fixtures & fastenings &

fastener sleeve.

45 Providing and fixing rolling shutters of approved makemade of 80 mm wide M.S. laths

inter-locked together through their entire length and jointed together at the ends by

end locks mounted on specially designed pipe shaft with bracket plates, guide

channels and arragements for inside and outside locking with push-pull operation 16.00 Sq.M 3784.54

including the cost of hood cover and spring etc. complete. (B) Shutters having width

3.5 M. and above

46 Providing and fixing window having extruded aluminum Colour Powder Coated

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt,

horizontal Three track member size 92mm x 31.75mm x 1.30mm @ Wt.1.07 Kg/mt,

vertical member of size 92mm x 31.75mm x 1.50mm ,@ Wt. 1.06 Kg/mt with sliding

shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, 144.00 Sq.M 1591.87

vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt with 5 mm

thick transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as per details

47 Providing and fixing window having extruded aluminum Colour Powder Coated

section frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt,

horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of

Kg/mt, vertical member of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.0.659

Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm @ 8.00 Sq.M 1705.67

wt.of 0.456Kg/mt, vertical member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window

48 Providing and fixing standared extruded of alluminium section of size 63mm x

38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for 20.00 Sq.M 1089.97

ventilation with 3 mm thick Bajari glass as details etc complete for Ventilation

49 Providing and fixing urinal of approved quality including connecting urinal with waste

pipe ,tap etc. complete (A) white earthen ware flat back type size 430 mm x 260 mm

x 350 mm including 32mm dia C.P. brass waste Coupling with PVC Waste pipe and 9.00 No 1142.77

PTMT Spreader with 15mm dia flexible pipe.

50 Providing and fixing kitchen platform trolley having three drawers of SS (IS 304) of

required size like partition type in kitchen platform having drawer front side and

backside by using 19mm thick all proof plywood of ISI quality all side laminated etc.

as directed. The size of SS (IS 304) basket of size 4" to 18" for tperforated, partition 4.00 Sqmt. 12645.20

type as directed including necessary S.S. fittings, handles, nobs, telescopic channels,

etc. as directed

51 Providing and fixing 90 cm high Stainless Steel railing made from anticorrosive

grade S.S. pipe of 50 mm dia (16 gauge) as hand rail with S.S. 304 grade baluster of

mm dia (16 gauge) as a vertical support fixed in RCC slab / steps of stair at 1.2 Mt. c/c

including three horizontal S.S. pipes of 16 mm dia (16 Gauge) at equal distance fixed 27.00 Rmt 2377.54

by 16 mm dia (16 Gauge) S.S. pipe with baluster including accessories as per detailed

drawing as directed etc. complete.

52 Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet fixed

with hilti screw and rubber silicon sealer and alluminium strip of size 50 x 3 mm etc

complete as directed by Engineer in charge.

53 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required

capacity each with all necessary fittings and connection etc. complete on terrace. 15000.00 Liter 3.95

54 Providing, laying and jointing in true line and level 110 diameter U.P.V.C SWR (Type

B) Pipe conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm 280.00 Rmt 897.79

length x 145 mm height at every 2000 mm centre to centre or shall be concealed in

walls as directed including necessary fittings such as bends, "Y" "T" shoes etc.

including testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

55 Providing, laying and jointing in true line and level U.P.V.C. SWR Type B Pipe

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fitting conforming to IS 14735-1999 of approved make for drainage system

pipeline, pipe shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using PVC Clamp of the size 160mm dia x 210 mm length x 196 mm high 250.00 Rmt 834.38

at every 2000 mm centre to centre or shall be concealed in walls as directed including

necessary fittings such as bends, shoes, tees, etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all materials (i) 160 mm

56 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be concealed as directed including 360.00 Rmt 195.67

necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

57 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be concealed as directed including 225.00 Rmt. 148.12

necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 40mm dia

58 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be concealed as directed including 180.00 Rmt. 91.84

necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 25mm dia

59 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5)

Pipe having National Sanitation Foundation (NSF) seal for potable water of following

dia. Nominal bore tube fitting and clamps including making good the wall, ceiling, and 300.00 Rmt. 253.82

floor, etc. complete 25 mm dia

60 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5)

Pipe having National Sanitation Foundation (NSF) seal for potable water of following

dia. Nominal bore tube fitting and clamps including making good the wall, ceiling, and 176.00 Rmt. 170.36

floor, etc. complete 15 mm dia

61 Providing and fixing Gun metal check or non-return full way wheel valve.(D) 50mm

62 Providing and fixing Gun metal check or non-return full way wheel valve.(E) 40mm

63 Providing and fixing Gun metal check or non-return full way wheel valve.(C) 25mm

64 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (ii)

65 Providing and fixing wash down water closet (European W.C. Pan) with integral P or S

trap and PVC dual flush tank with complete fittings including cutting holes in walls

and making good the same connecting the flush bend with cistern and closet etc.

complete including plastic seat cover, water jet and including jointing trap with Waste 20.00 No 3227.96

pipe overall size as per the selection of the Model by E.I.C. or as approved}

66 Providing & fixing of first quality (ii) Flat Back washbasin 550 mm x 400mm size. (i) In

white colour. including with approved sanitary grade material with C.P waste

coupling, waste pipe, 15mm dia Pillar & Stop Cock of approved brand with 20.00 No 2147.26

connection 15mm dia flexiable pvc pipe etc. complete

67 Providing, laying and filling 50mm thick expansion joint by hydro cell semi rigid UV

resistance with high performance laminated closed cell polyyhene foam joint filler in 1008.00 Sq.Mt 1491.03

sheet foam as directed etc.complete.

68 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated

screws down Bib Tap. (i) 15mm dia.

69 Providing and fixing brass screw down stop tap.(A) 15mm dia. make as approved by

Engineer In Charge. 13.00 No 205.83

70 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with

jali of the following nominal diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good the walls. 50.00 No 600.23

71 Providing and fixing Jet spray to connect wall mount w.c with 1.5 mtr long plc. heavy

duty supply pipe with two side male female checknut etc. complete. 20.00 No 308.99

72 Providing and fixing S.W. Gully trap with C I grating brick masonry chamber and water

tight C I cover with frame of 300 x 300 mm size (inside) with standard weight 20.00 No 1246.92

(i)square mouth traps (C) 150 mm x 100 mm size P or R type

73 Providing and fixing C.P. brass towel rail complete with C.P. Brass brackets fixed to

wooden plugs with C.P. Brass screws, (B) 600mm x 20 mm size 20.00 No 616.42

74 Providing and fixing 600mm x 450mm Bevelled edge glass mirror of superior glass

mounted on 6mm the A.C. sheet or plywood sheet & fixed to wooden plugs with C.P. 20.00 No 859.41

brass screws and washers.

75 Providing and fixing in position PVC cowel went to pipes.(C) 160mm dia 15.00 No 75.75

76 Providing and fixing in position PVC cowel went to pipes.(B) 110mm dia. 15.00 No 50.50

77 Providing and fixing to wall, ceiling and floor 10.0 Kg f/cm2 working pressure

polyethylene pipes of the following outside dia. Low density, complete with special

flange compression type fittings wall clamps etc. including making good the wall, 728.00 Rmt. 339.05

ceiling and floor. (G)110 mm

78 Constructing brick masonry chamber for under ground C.I. Inspection chamber and

bends with bricks having crushing strength not less than 35 Kg/cm2 in cm. 1:5 C.I.

Cover with frame (light duty) 455 mm. X 610 mm. Internal dimensions, Total weight

of cover with frame to be not less than 38 Kgs. weight of cover 23 Kg. and wt. of

frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stone 35.00 No 3660.76

aggregate 20 mm. size ) foundation concrete 1:5:10 inside plaster 15 mm. thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls &

abed concrete etc. complete.(ii) Inside dimensions, 500 mm. x 700 mm. and 450 mm.

Deep for pipe line with one or two inlets.

79 Applying general insecticide pest control treatment to floors, cupboards etc. including

labour material etc. complete. Using Imidacloprid 30.5 SC As Per IS 6313 part-III

(0.075% Concentration by mass) is recommended 10.5 ml chemical dilute with 5 950.00 Sq.M 43.97

litters of water application 0.5 Litre chemical / Sq.M of surface is recommended as

80 Providing and laying (Two level or slopes) and jointing with stiff mixture or cement

mortar in proportion 1:1, salt glazed stone ware pipes including testing of pipes and

joints etc. complete and Providing and laying Cement concrete 1:5:10 (1-Cement : 5-

Fine sand :10-Graded stone aggregate 40mm nominal size) bedding for stoneware 600.00 Rmt 564.52

pipes (166mm Ave. bed thickness) of following internal diameters with necessary

formwork and curing complete.(B) 150mm dia.

81 Providing and laying (Two level or slopes) and jointing with stiff mixture or cement

mortar in proportion 1:1, salt glazed stone ware pipes including testing of pipes and

joints etc. complete and Providing and laying Cement concrete 1:5:10 (1-Cement : 5-

Fine sand :10-Graded stone aggregate 40mm nominal size) bedding for stoneware 400.00 Rmt 352.74

pipes (166mm Ave. bed thickness) of following internal diameters with necessary

formwork and curing complete.(B) 110mm dia.

82 Providing and laying (to level or slope) and jointing reinforced concrete not pressure

pipes IS class NP 2 of the following internal diameter with collars and nut ends

prepared for collar joints including testing of joints complete 300 mm dia 800.00 Rmt 678.03

83 Providing and laying in trenches jointing in true line and level 50mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer In Charge, including necessary fittings 400.00 Rmt 195.67

etc. including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of excavation & refilling the same with all materials.

84 Providing and fixing Safety Grills of required pattern for windows/door using 16mm x

16 mm square M.S. polished bars, Required at required spacing as per design and

hold fast with coach bolts including one coat of primer and two coats of matt finished 3851.00 Kg. 116.91

oil painting etc. complete.

85 Providing plinth protection to building including excavation in ordinary soil and laying

cement concrete 1:4:8 using stone aggregates of 40mm nominal size in foundation

layer 0.10 mt. thick below pre-cast Rubber Dye inter locking concrete block 60mm

thick with grade of concrete M200 pneumatic compressed by mechanically pressed

and as per approved design including 75mm Sand layer for levelling and filling the

joint with sand in proper line and level etc. complete, Including Providing and fixing 208.00 Sq.M 1313.00

pre-cast concrete kerb stone of grey cement based concrete block 30cm length,30cm

height and 15cm thick of M250 grade concrete as per approved design and including

excavation for fixing in proper line and level, filling the joint with C:M 1:3

(1cement:3fine sand) etc. complete.

86 Providing and fixing in position 300 mm high, 150 mm wide English/Gujarati letters

made from 1.0 mm thick stainless steel sheet as directed by Engineer-in-charge with 200.00 No 707.00

all necessary tools & plants etc. complete.

87 Providing and fixing in position 150 mm high, English/ Gujarati letters made from

mm thick stainless steel sheet as directed by Engineer-in-charge with all necessary 200.00 No 404.00

tools & plants etc. complete.

88 Providing and fixing of conspectus tape 50mm width on of treads in staircase

including cutting pasting etc . As per harmonised guidelines complete in all respect to 20.00 Rmt 1567.52

the entire satisfaction of engineer in charge.

89 Providing and Fixing Size : L 75mm x W 75mm xl 1200 : 15 mnthick U shape corner

Rubber Reflective Guards with yellow |relective Patti fixing on RCC/brick surface

Including all ftting and materlal charges & it shall be Chemical Resistant, Fade Proof,

Frost - Heat & Weather Proof, High Flexural Strength, Hiehlv Durablc, Stain Resistance 40.00 No 685.29

as per detailed drawing etc . complete as directed by Architect or Engineer in charge.

90 Providing and Fixing 15 mm thick 300 mm x 300 mm Tactibe Warning Tiles (Attention

Tilesi .e. Tactile Warning Surface |Indicator (TWSI)}) of Johnsan Endura Tac Button

Yellow Plus or equvglent make in flooring laid on 20 mm thick cement mortar 1:6 (1

cement : 6 coarse sand) on new surface and jointod with cement slurry including

finished with flush pointing & cleaning the surface for all loors as per detailed

dravwing ctc. complete as directed by Architect or Engincer in charge.Thse tiles shall

be Anti Skid, Chemical Resistant, Fade Proof, Frost - lleat & Weather Proof, High

Flexural Strength, Highly Durable, Stain Resistance . All Tactile Warning Tiles meet the

specific size and dimension standards as required by IS0/FDIS

91 Providing and Fixing a set of wall mounted 38 mm dia U shaned borzontal stalnless

stecl collapsible grab bar 38mm vertical Rate Analysis 53 stainless steel fixed grab rail

of grade SS 304 rom round plne supDorted and 75 mm dla 8 mm thick SS 304 base

flange on wall including anchor fasteners, nuts, accessories as per detalled drawing 6.00 Set. 2671.45

cte , complete as dlrected by Architect or Engineer in charge.

92 Providing and fixing kitchen sink painted white with C.I. or M.S. brackets M.I. Fiber

union 32 mm dia. C.P. brass waste 32 mm dia. 15 mm stop cock etc. completed,

including cutting holes in walls and making good the same but excluding fittings, (C ) 2.00 Nos. 3149.18

Vitreous China Sink (i) 600 mm X 450 mm X 150 mm Size

93 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block

60mm thick with grade of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 203.00 Sqmt. 705.95

mm Sand layer for levelling and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete.

94 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall ceiling 100.00 Rmt. 515.27

and floor.(G)160 mm

95 Providing junction for rain water juncton chamber of size 0.60x0.60x0.75m with

excavation of size 1.96x1.96 m & 0.15m thick c.c.1:2:4 bed concrete including brick

masonary wall in CM 1:6 of 0.75m height & 0.23m thick with 15mm thick cement

plaster inside & outside & 1.06x1.06 RCC (1:2:4) slab of thickness 0.15m with CRS 20.00 Nos. 7087.17

steel and 0.60mx0.45m cast iron manhole cover with frame weight not less than

kg as per directed by Engineer-in-charge

96 Providing Filter chamber of Brick work in C:M 1:6 of size 2.06mx1.20m x1.20m &

excavation dimension of 2.82mx 1.96x1.35m including C.C 1:2:4 bed concrete of

0.15m thick including brick work in c.m 1:6 for 23cm thick wall including 15mm thick

cement plaster inside & outside with cement slurry & 10cm thick RCC 1:2:4 top cover 5.00 Nos. 14799.53

with frame of minimum weight of 35 kg & filling filter material kapchi in layers (25-

40mm & 10-20mm) & BT metal 40mm & sand as per directed by Engineer-in-charge.

97 Providing Recharging pit of size 2.0m Dia.& 2.0m depth of water logging with

excavation filling the pit with gravel & sand in layers including making 300mm dia

bore depth of 4.5mt & above concrete with kapchi in layers (25-40mm & 10-20mm) 2.00 Nos. 9980.82

& BT metal 40mm & filling brick as directed by Engineer-in-charge.

98 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out

and stacking of useful materials and disposing off the excavated stuff upto 50 33.00 Cum 333.38

Meter lead.(D) Soft rock not requiring Blasting

99 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded

stone aggregates 20 mm nominal size) and curing complete excluding cost of 9.00 Cum 3591.22

formwork in (A) Foundation and Plinth

100 Brick work using common burnt clay building bricks having crushing strength not less

than 35 Kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 - 59.00 Cum 4367.92

fine sand) (B) Conventional.

101 Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions, total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone 5.00 No 2932.93

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm

deep for single pipe line.

102 Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions, total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone 5.00 No 7180.44

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(iii) Inside dimensions 600mm x 850 mm and 450mm

deep for pipe lines with three or more inlets.

103 Providing and laying (two level or slopes) and jointing with stiff mixture of Cement

Mortar in proportion 1:1, Salt glazed stone ware pipes of pipes 150mm laying lime

concrete 1:2:4 (1-Lime putty :2-Fine samd : 4-Graded brick aggregates 40mm nominal 100.00 Rmt 803.14

size) bedding for stoneware pipes of following internal diameters with necessary

formwork and curing complete.

104 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 17.00 Cum 5822.65

reinforced concrete work in Ground & Plinth BEAMS

105 Providing and laying controlled cement concrete M-200 and curing etc. complete

including the cost of form work and excluding the cost of reinforcement etc. 15.00 Cmt 8846.59

complete in RCC wall up to floor two level for Below plinth

106 Providing cement vata (10cm x 10cm size) quarter round in cement mortar 1:1

including neat cement finishing watering etc. Complete 26.00 Rmt 24.28

107 Providing 20 mm thick double coat mala cement plaster on interior brick / concrete

work for plastering comprising of base coat of 12 mm thick cement plaster in cement

mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of 164.00 Sqm 370.67

cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing etc. complete. For Ground floor

108 Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white 101.00 Sqm 1070.50

cement slurry (upto 10 ton)

109 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less

than 35Kg. 1.00 Nos. 958.17

110 Providing & erecting open well horizontal mono block pump set with cast iron body,

complete for three phase submersible motor having [H]For 15 H.P,3 phase open well

horizontal mono block pump set suitable for 1600 LPM to 1025 LPM @ 33 to 42 MTR 2.00 Nos 36107.50

head suitable for 65/80 mm dia delivery pipe

111 P & L 60x60 cm Machin cut Mirror polished Blue Kota Stone slab 25 mm thick flooring

over 20 mm (average)thick base of cement mortar 1:6 (1-cement 6-coarse sand) or

L.M 1:1.5 (1 Lime putty : 1.5 coarse sand laid over and jointed with grey cement 32.00 Sqmt 1019.39

slurry mixed with pigment to match the shade of slab including rubbing and polishing

112 P & L 60x60 cm Machin cut Mirror polished Blue Kota Stone slab 25 mm thick in riser

of steps,skirting dedo and pillars laid on 10 mm thick cement mortar 1:3 (1-cement 3-

coarse sand) and jointed with grey cement slurry mixed with pigment to match the 2.00 Sqmt 1205.60

shade of slab including rubbing and polishing etc.complete

113 Distempeing (Two coats) with oil bound distemper of approved brand and

manufacture and Washable of required shade on wall surfaces to give an even shade,

over and including a priming coat with distemper primer of approved brand and

manufacture after thoroughly brushing the surface free from mortar dropping and 157.00 Sqmt 77.30

other foreign matter and also including preparing the surface even and sand papered

114 Distempeing (Two coats) with oil bound distemper of approved brand and

manufacture and Washable of required shade on Celling and sloping roof to give an

even shade, over and including a priming coat with distemper primer of approved

brand and manufacture after thoroughly brushing the surface free from mortar 64.00 Sqmt 85.85

dropping and other foreign matter and also including preparing the surface even and

sand papered smooth.

115 Providing and fixing window having extruded aluminum Colour anodized section

frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of

0.738 Kg/mt) horizontal two track member size size 92mm x 31.75mm x 1.50mm (of

Jindal Section no:8933,@ Wt. 1.06 Kg/mt), vertical member of size size 92mm x

31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt)with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section 4.00 Sqmt 2362.39

no:8949 @ wt.of 0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of

Jindal Section no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt) with

5 mm thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as

per details etc complete for W2&W3

116 Drilling of 200 / 215 mm dia. bore well in over burden rocky or loose collapsible /

boulder strata & lowering of 175 / 200 mm dia. UPVC / PVC / ERW casing pipe above 50.00 Rmt 414.10

12 meters and up to 40 meters depth by DTH rig etc.complete

117 Supplying slotted PVC pipes of approved quality at site of work confirming to IS.

118 Supplying PVC plain pipes of approved quality at site of work confirming to IS.

119 Providing and jointing flat flexible coppered calble PVC insulated enamelled aproved

make three core 2.50mm. 25.00 Rmt. 104.03

120 Supplying submersible pump set suitable for bore of 150 mm dia or more having

phase motor capacity not less than 10 HP with [A] 10 stage 575 to 480 LPM discharge

at 60 to 70 mtr head for 65 mm dia delivery pipe Supplying and erecting push

button operated fully automatic Star-Delta starter with 3 Nos.of 32A. rating

contactors and. 1 No. of directly operated thermal overload relay having 20-32A

range in sheet steel enclosure for 3 phase 415V. 50 c/s. A.C. motors up to 35 H.P.

(A)P.W.Blockwith necessary connection complete erected onas directed. Cat-II

121 Providing and fixing to wall ceiling and floor HDP pipes tubes (medium grade) of the

50mm nominal bore, tube, fittings and clamps include. Making good the wall ceiling 25.00 Rmt 513.08

and floor.(F) 50mm dia.

122 Providing and fixing to concealed wall ceiling and floor galvanized mild floor tubes

(medium grade) of the 50mm nominal bore, tube, fittings and clamps incldg. Making 25.00 Rmt 608.35

good the wall ceiling and floor (F) 40mm dia..

123 Providing and fixing to concealed wall ceiling and floor galvanized mild floor tubes

(medium grade) of the 25mm nominal bore, tube, fittings and clamps incldg. Making 25.00 Rmt 401.95

good the wall ceiling and floor.(C) 25mm dia.

124 Earthwork in cutting including preparing the slope and camber andstacking or

utilising the cutting stuff in bank as directed upto 200 Meters from the end of cutting

with all lead and lift.(i) Hard murrum.+ Add extra over item 9 for conveying and 46.00 Cum 396.05

utilising the stuff in bank from end of cutting with all required lead and lift.(C) Above

400 Meters upto 500 Meters

125 Box cutting the road surface to proper slope and camber for making a base for road

work including removing the excavated stuff with desposing on the road side slope as 316.00 Cum 112.02

directed up to 50 mt. Lead

126 BT Metal 25 to 40 MM & Aggregate 13.2 and down chips & SD including conveyence

+ Spreading the stone aggregate for rolling and W.B.M. including filling the

interstices to required camber and gradient (excluding spreading of Blindage)(iii) 95.00 Cum 1153.62

25mm to 50mm size crushed stone

127 Providing and laying foundation cement concrete 1:3:6 ( 1 cement :3 coarse sand :

aggregate 20mm nominal size ) graded concrete and curing complete 64.00 Cum 3925.48

128 Providing and and laying controlled cement concrete M250 and curing etc. comp.

including the cost of form work and reinforcement for R.C.C. work for internal road. 127.00 Cum 4185.96

129 Compaction and finishing of cement concrete road by tremix process, providing extra

labour charge for tremix ( Vaccum dewatering service ) process on cement concrete

road surface by using vaccum dewatering pump floater surface vibrator including 631.50 Sqm. 81.81

making groove 5mm width and filling with polyvynile polymer and rough finish to

surface as per instruction including leveling etc. complete.

130 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars

for culverts including setting and joining the pipes in C.M. 1:2 watering and laying (To

level of slops of I.S. 458 / 1971 Class NP3 casted by vertically vibrated technology of 100.00 Rmt 1095.18

following internal diameter. (i) 300 mm dia.

131 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete

block 30cm length,30cm height and 15cm thick of M200 grade concret as per

approved design and including excavation for fixing in proper line and level,filling the 171.00 Rmt 413.84

joint with C:M 1:3 (1cement:3fine sand) etc complete.

132 Plantation of trees in soil including digging 45 x 45 x 45cm size pits, preparing soil,

providing and mixing organic fertiliser, watering, planting and filling the pits as per 150.00 No. 35.35

direction including etc. comlete

133 Providing tree plants having minimum 1.00 mt height and healthy growth various

kinds as like Peltoform, Gulmahor, kananj, Amla, Raintree, Saptaparni, Cherry

Cryjeliya, Borsalli, Kadam, Buch, Champo, Asopalav and as suggested etc. complete. 150.00 No. 25.25

& Maintinence of 3 month After Providing Tree Plant.

134 Providing and fixing TREE GUARD 2.00 mt. long & of 600mm dia. square mesh of 2” x

2” and M.S. Flat of 25mm x 5 mm vertical support and three rings of 20 x 3 mm flat,

fixing on site in CC 1:4:8 and including oil painting two coats with red lead priming 150.00 No. 939.30

135 Providing and fixing H.D.P.E. water tank with necessary G.I. fitting over flow pipe, boll

valve, clamp, nipple etc. including placing on 90 raised platform as directed. 5000.00 Ltr. 4.66

136 Providing and erecting open well type horizontal monoblock pumpset with C.I. body

having following specification (I) 1 H.P. single phase open well motor pumpset

suitable for 145 lit/min (ii) Suitable for 32 dia. delivery pipe with control panel & 10 1.00 No. 8080.00

mtr long 3 x 1.5mm 2 submersible flat copper cable. (Cat-II type)

137 Providing and fixing Drip irrigation System of approved brand for plantation including

fixing with water supply line for plantation as per drawing and requirement. (a) 2.00 No. 1565.50

Screen filter 7000 Ltr per day

138 Providing and fixing Drip irrigation System of approved brand for plantation including

fixing with water supply line for plantation as per drawing and requirement. (b) 2.00 No. 373.70

Pressure Gauge 1" dia (0-7 Kg/Cm/2)

139 Providing and fixing Drip irrigation System of approved brand for plantation including

fixing with water supply line for plantation as per drawing and requirement. (c) By

Pass assembly gun metal

140 Providing and fixing Drip irrigation System of approved brand for plantation including

fixing with water supply line for plantation as per drawing and requirement. (d) 32 2.00 No. 323.20

mm dia. Control Valve Gun metal

141 Providing and fixing Drip irrigation System of approved brand for plantation including

fixing with water supply line for plantation as per drawing and requirement. (e)

mm lateral HDPE pipe 2.5 Kg including fitting and micro Tibe / Dipper etc. 3500.00 No. 10.10

142 Providing and fixing Drip irrigation System of approved brand for plantation including

fixing with water supply line for plantation as per drawing and requirement. (f) 400.00 No. 2.12

1.2mm Micro tube

143 Providing and fixing Drip irrigation System of approved brand for plantation including

fixing with water supply line for plantation as per drawing and requirement. (g) 400.00 No. 2.12

Dripper 4 LPH / 8 LPH

144 Providing and laying in trenches 6.0 kgF/cm2 working pressure PVC pipes for water

supply line of the following outside dia. having white colour complete with necessary 720.00 Rmt. 68.68

fitting clamps etc. (B) 50 mm dia.

145 Providing and laying in trenches 6.0 kgF/cm2 working pressure PVC pipes for water

supply line of the following outside dia. having white colour complete with necessary 430.00 Rmt. 44.44

fitting clamps etc. (A) 32 mm dia.

146 Grassing with selection No. 1 doob grass including watering and maintenance of the

lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for

mowing including supplying good earth, if needed (the grass and good earth shall be 500.00 Sqmt 90.90

paid for separately).

147 Demolition including stacking of serviceable materilas and disposal of unserviceable

materials with all lead and lift. (i) R.C.C. work 346.00 Cu.M 1108.12

148 Demolition of Brick work and stone masonry including stacking of serviceable

material and disposal of unserviceable materials with all lead and lift. (ii) In cement 522.00 Cu.M 576.30

149 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves, holdfasts and other attachment etc. complete and stacking 130.00 Each 196.66

them within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

150 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps

including stacking the materials with all lead and lift ( for any dia, of pipe) 50.00 Rmt 78.50

151 Dismantling santtary fittings like wash basin . W.C. pan Indian and European type,

flushing tank etc. including stacking the materials with all lead and lift. 24.00 Each 424.10

152 Supplying, installation, testing and commissioning of electric driven pressurisation

pump suitable for automatic operation and consisting of following, complete in all

respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of

cast iron body and bronze impeller with stainless steel shaft, mechanical seal

conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable

for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for

enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS :

325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts

etc. as required.

Suitable cement concrete foundation duly plastered and with anti vibration pads.

3.4 300 lpm at 88 m Head

153 Supplying, installation, testing and commissioning of diesel engine driven main fire

pump suitable for automatic operation and consisting of following, complete in all

respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal

pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical

seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel

engine conforming to relevant IS standard complete with auto starting mechanism,

12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto

m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick 1.00 Nos 454046.61

aluminium sheet cladding, residential silencer, instruments and protection as per

standard specification, stop solenoid for auto stop in the event of fault with audio

indications, painted with post office red colour etc. as required. M.S fabricated,

common base plate, coupling, coupling guard, foundation bolts etc. as required.

Suitable cement concrete foundation duly plastered and with anti vibration pads.

2.7 1620 lpm at 88 m Head

154 Fabrication, supply, Insallation testing & commissioning of Electrical control panel of

cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet,

compartmentalised with hinged lockable doors, dust and vermin proof, powder

coated of approved shade after 7 tank treatment process, cable alley,

interconnection with suitable size copper conductor cable/solid copper strip, having

switchgears and accessories, mountings and internal wiring, earth terminals,

numbering etc. complete in all respect, suitable for main fire pump, pressurisation

pump & diesel pump set complete as per CPWD specification with following in

coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with

enclosure protection class IP 42 as required : 5.1 INCOMING - 250A, 50kA 4 Pole

MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital

Ammeter (0-250 A) with selector swtich & CTs etc. LED type RYB phase indicating

lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A 1.00 Nos 217612.83

OUTGOING ( Note : All outgoing feeders for pumps should have digital Ammeter with

selector switches, and LED type ON, OFF, trip indicating lamps)

125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable

for 60 HP pump with overload protection, current sensing type single phase

preventor complete with all acceessories and internal wiring required for automatic

operation, selector switch for local/remote, auto/manual/OFF operation. Jockey

63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta

starter with overload protection, current sensing type single phase preventor

complete with all acceessories and internal wiring required for automatic operation,

selector switch for local/remote, auto/manual/OFF operation.

155 Supply Of 12 V Battery, Coolant ,Engine Oil And Diesel Tank 1.00 SET 29795.00

156 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe conforming

to IS 3589/IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nut

bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support 10.00 Rmt 3059.10

frame and painting with two or more coats of synthetic enamel paint of required

shade complete as required:150mm

157 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe conforming

to IS 3589/IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nut

bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support 85.00 Rmt 2262.88

frame and painting with two or more coats of synthetic enamel paint of required

shade complete as required:100 mm dia

158 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe conforming

to IS 3589/IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nut

bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support 70.00 Rmt 1668.91

frame and painting with two or more coats of synthetic enamel paint of required

shade complete as required:80 mm dia

159 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe conforming

to IS 3589/IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nut

bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support 140.00 Rmt 1134.42

frame and painting with two or more coats of synthetic enamel paint of required

shade complete as required:50 mm dia

160 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe conforming

to IS 3589/IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nut

bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support 30.00 Rmt 915.29

frame and painting with two or more coats of synthetic enamel paint of required

shade complete as required:40 mm dia.

161 Providing laying,testing & commissioning of 'C' class heavy duty MS Pipe conforming

to IS 3589/IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nut

bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support 160.00 Rmt 658.43

frame and painting with two or more coats of synthetic enamel paint of required

shade complete as required:25 mm dia.

162 Wrapping & Coating of Underground Pipe. with 4mm damar coat for Pipe Coating

etc.suitable for pipe size

163 Supplying,fixing,testing & commissioning of double flanged sluice valve of rating PN

1.6 with non rising spindle,bronze/gun metal seat,ISI marked complete with

nuts,bolts,washers,gaskets and conforming to IS 780 of following sizes as 1.00 Nos 12965.41

164 Supplying,fixing,testing & commissioning of double flanged sluice valve of rating PN

1.6 with non rising spindle,bronze/gun metal seat,ISI marked complete with

nuts,bolts,washers,gaskets and conforming to IS 780 of following sizes as 1.00 Nos 9471.70

165 Supplying,fixing,testing & commissioning of butterfly valve of PN 1.6 rating with

bonze/gunmetal seat duly ISI marked complete with nuts,bolts,washers,gasket 2.00 nos 7934.91

conforming to IS 13095 of following sizes as required:150 mm dia.

166 Supplying,fixing,testing & commissioning of butterfly valve of PN 1.6 rating with

bonze/gunmetal seat duly ISI marked complete with nuts,bolts,washers,gasket 4.00 nos 5904.43

conforming to IS 13095 of following sizes as required:100 mm dia.

167 Supplying,fixing,testing & commissioning of butterfly valve of PN 1.6 rating with

bonze/gunmetal seat duly ISI marked complete with nuts,bolts,washers,gasket 2.00 nos 4412.15

conforming to IS 13095 of following sizes as required:80 mm dia.

168 Supplying,fixing,testing & commissioning of butterfly valve of PN 1.6 rating with

bonze/gunmetal seat duly ISI marked complete with nuts,bolts,washers,gasket 2.00 nos 3350.60

conforming to IS 13095 of following sizes as required:50 mm dia.

169 Providing,installation,testing and commissioning of non return valve of following

sizes conforming to IS:5312 complete with rubber gasket,Gi bolts,nuts,washers etc.as 1.00 nos 15750.74

required:150 mm dia.

170 Providing,installation,testing and commissioning of non return valve of following

sizes conforming to IS:5312 complete with rubber gasket,Gi bolts,nuts,washers etc.as

required:100 mm dia.

171 Providing,installation,testing and commissioning of non return valve of following

sizes conforming to IS:5312 complete with rubber gasket,Gi bolts,nuts,washers etc.as 1.00 nos 6811.18

required:80 mm dia.

172 Providing,installation,testing and commissioning of non return valve of following

sizes conforming to IS:5312 complete with rubber gasket,Gi bolts,nuts,washers etc.as 2.00 nos 5127.87

required:50 mm dia.

173 Supply, Installation, Testing and Commissioning of Gun Metal Air Release Valve

with necessary fittings. Size: 25 mm 2.00 Nos 2373.50

174 Supply, Installation, Testing and Commissioning of 100 mm dia Pressure Gauge (for

all pipes) of range 0 - 15 Kg / cm² conforming to IS - 3624 having bourdon tube of

stainless steel 310 in cast aluminium, stove enameled, black, weather proof

case with outer, screwed aluminium bezel and complete with necessary U-type 2.00 Nos 2777.50

stainless steel siphon tube and cock including providing suitably painted angle iron

support to the tube etc.as per required.

175 Providing & fixing of pressure switch in M.S pipe line including connection etc. As

required. 3.00 nos 3383.50

176 Providing, fixing, testing & commissioning of 50sqmm 3.5 Core Alluminium Armoured

Cable of required size from Main 3 phase connection to Fire Pump House with 100 120.00 Rmt 398.95

Amp MCCB with Cover as required:

177 Supplying and fixing single headed internal hydrant valve with instantaneous

Stainless Steel coupling of 63mm dia with cast iron wheel ISI marked conforming to IS 4.00 Nos 5254.57

5290 (type-A)with blank cap and chain required:

178 Supplying & fixing 63mm dia gun metal short branch pipe with 20mm nominal

internal diameter size nozzle conforming to IS 903 suitable for instantaneous 4.00 Nos 2139.34

connection to interconnect hose pipe coupling required:Gun metal

179 Supplying and fixing 63mm dia,15 m long RRL hose pipe with 63mm dia male and

female couplings duly bound with GI wire,rivets etc. conforming to IS 636 (type-A) as 8.00 Nos 4606.41

required:Gunmetal

180 Supply, Installation, Testing and Commissioning of Weather proof Standard Fire

Hose Cabinet wall mounting type (750 mm x 600 mm x 250 mm deep) having single

or double opening with necessary locking arrangement by allan key suitable for 4.00 Nos 3535.00

housing 2 nos. hose pipe, 1no. Branch pipe & nozzle spanner.

181 Supplying and Fixing of fire brigade connection of cast iron body with gun metal male

instataneous inlet couplings complete with cap and chain as reqd. for suitable dia MS

pipe connection conforming to IS 904 as required:2 way 100mm dia MS Pipe 1.00 set 5970.25

182 Supply, and fixing First Aid Hose Reel with MS construction spray painted with P.O

red,conforming to IS 884 complete with the following as required.

20mm nominal internal dia water hose thermoplastic(textile reinforced) type-2 as per

IS 12585 20mm nominal internal dia gun 4.00 Nos 7682.68

metal globe valve and nozzle. drum and brackets for fixing the equipment on the

wall.Connection from riser with 25mm dia stop gun metal valve & MS pipe and

183 Sitc of Manual call Point (MCP) with complete all accessories. 6.00 Nos 1040.30

184 Sitc of Audio Hooter with complete all accessories 6.00 Nos 1111.00

185 Sitc of smoke detector conventional type with complete all accessories. 90.00 Nos 1060.50

186 SITC of Fire Alarm Panel 4 loops Conventional type with battery

187 Supplying and laying of 2x1.5 sqmm fire alarm armoured cable,600/1000V rated with

annealed copper conductor having XLPE insulation,steel wire armouring &FRLS outer 260.00 Rmt 152.89

sheath complete as required.

188 Providing,fixing,testing & commissioning of 15mm dia quartzoid bulb type sprinklers

of rating 68 degree centigrade with required accessories:Pendent sprinkler 95.00 Nos 462.22

189 Providing, fixing photo luminescent Signage's as per IS standard in Block / Small

Letters on rigid sheet with necessary wall or Ceiling fittings as Specified Sizes: 3300.00 Sq.inch 9.09

For Fire Extinguisher,exit,do not to do,etc.

190 Supply, installation, testing and commissioning of ABC type 6 kg confirm to

IS:15683, with ISI marked / TAC approved fitted with required accessories 8.00 Nos 2626.00

including wall suspension brackets.

191 FIRE EXTINGUISHER

Supply, installation, testing and commissioning of Carbon Dioxide (CO2) type Fire

Extinguisher of 4.5 kg confirm to IS:15683, with ISI marked / TAC approved fitted 8.00 Nos 9595.00

with required accessories including wall suspension brackets.

192 Supply, installation, testing and commissioning of Modular ABC type 5 kg confirm

to IS:15683, with ISI marked / TAC approved fitted with required 1.00 Nos 2525.00

accessories including wall suspension brackets.

193 Supply, installation, testing and commissioning of Stainless steel Ball Valve. a) 25mm

dia 7.00 Nos 1212.00

194 Providing Core Cutting for beam & Slab up to 25 mm to 100 mm dia directed by

engineer in-charge. 15.00 Nos 858.50

195 Supplying, Installing, Testing & Commissioning of M.S. structural steel support. 195.00 kg 90.90

196 Suppy, Installing, Testing and Commissioning of C.I. Heavy duty foot valve with flangs,

Nut bolts, Gaskets etc. with necessary complete accessories.150mm 2.00 Nos 16665.00

197 Suppy, Installing, Testing and Commissioning of C.I. Heavy duty foot valve with flangs,

Nut bolts, Gaskets etc. with necessary complete accessories.100mm 1.00 Nos 12625.00

198 3 Layer PVC Storage Tank 5000 ltr. Installation With all accessories like

M.T,L.T,Band,Clamp,Solution And Plumbing charges including as per MR 1.00 Nos 55550.00

199 Supplying FIRE bucket round bottom of 9 liters capacity made out of 24 gauge G.I

Sheet with extra handle at bottom duly painted white inside and Red out side with

FIRE mark. Filled with dry-sand and kept on existing stand provided or hung on wall 4.00 Nos 1025.15

200 Supplying and erecting floor mounting Stand for keeping four nos. of FIRE buckets

comprising 1500 mm in length, 900 mm height frame made out of 30mm x 30 mm x

mm angle iron with cross supports legs, welded with 4 hooks and duly painted with 1.00 Nos 5807.50

one coat of primer and two 3coats of approved enamel P O red paint.

201 Submitting the application to obtain Fire Plan Approval and After Completion of Work

Obtain Final Fire NOC for 3 Year 1.00 Nos 85850.00

202 Supply, installation, testing & commissioning of Priming tank, HDPE type, 1000 litres,

with necessary piping 100 mm size, G.I pipe for priming the pumps, pipe of with

butterfly valves for isolation, Water Filling to priming tank by piping min. 50 mm size, 1.00 Nos 53530.00

with all complete.

203 Pay Legal Fees to Concern Authority for Obtaining Plan Approval and Final NOC

204 Providing and fixing Mirrar polished 18 mm thick Green Marble stone with full round

edge and polished of approved quality in clading on sill and around the doors/

windows/ ventilation with 20 mm thick cement motor CM (1:3) and fixing with 12.00 Sqmt 1730.13

cement slurry & adhesive including moulding of exposed edges as directed by

engineering in charge etc. complete.

205 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with 282.00 Pt. 485.81

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete. Cat-III

206 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden box, single mounting 107.00 Pt. 674.68

base frame covered with textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Ca-III

207 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with following type of 20.00 Pt. 510.05

accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Ca-III

208 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall / ceiling with 73.00 Pt. 257.55

following type accessories. Ca-III

209 Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site 9.00 Nos. 151.50

situation directed by Engineer In charge.(1)One No. SP 6 Amp.Cat-III

(2) One No 5 pin plug.Cat-III 9.00 Nos. 151.50

(7) Blank Plate Single Ca-III 60.00 Nos. 25.25

(8) Computer RJ-45 socket Ca-III 21.00 Nos. 160.59

(10) 6/16Amp. Universal socket Ca-III 42.00 Nos. 199.98

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch. Ca-III 12.00 Nos. 410.06

210 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in 840.00 Mtr. 33.33

approved manner as directed. (b) 25 mm

211 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated 80.00 Mtr. 62.62

stranded wire of green colour for earth continuity of following size. (a) with medium

class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm

(b) 2 wire 2.5 sq. mm 1141.00 Mtr. 82.82

212 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green 1396.00 Mtr. 112.11

colour for earth continuity of following size (a) with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm

(h) 4 wire 6 sq. mm 214.00 Mtr. 260.58

213 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -

227 erected in existing pipe of following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring) with required size of copper lugs, 104.00 Mtr. 91.91

nuts and bolts if required.(f) One wire 10.00 sq. mm

(g) One wire 16.00 sq. mm 120.00 Mtr. 142.41

(i) One wire 35.00 sq. mm 60.00 Mtr. 300.98

214 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI

marked copper wires of following size to be erected as directed.(h) 2.50 Sq.mm

core round PVC sheathed

215 Supplying & erecting approved make LAN cable of following size in existing pipe as

per direction. [C] CAT - 6 420.00 Mtr. 47.47

216 Providing & erecting Switch board for Computer or electric apparatus consisting of

following modular type accessories mounted with PVC / Metallic concealed/open

box with single mounting base frame covered with textured/metallic /white front

plate,modules erected with necessary connections as directed. 1 no. 6A/16A 21.00 Nos. 1133.22

universal plug-switch combined. 3 nos. 6A Switch, 3 nos. 6A 5 pin Plug [B] For

Modular Type Accessories Ca-III

217 Decorative call bell Ting-tong box type 250 volts complete erected 5.00 Nos. 71.71

218 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,CCT 3000 K to 6500K, Luminaire efficacy>

85 lumens/watt ,LED driver efficiency > 85 % (fitting required LM-79 & LM-80 234.00 Nos. 535.30

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.) (A) Tube Light with integral driver. (v) 36 Watts, Surge-2 KV, IP-20,

conventional 4 feet Ca-III

219 Supplying and erecting led lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built,

surge,protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp 19.00 Nos. 112.11

holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder.

(ii) 8 watts Cat-III

220 Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)(A) Street Light

(IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with

over-voltage protection. (iII) 60 watts. Cat-III

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection. (iv) 120 watts. Ca-III 10.00 Nos. 7266.95

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun

aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical

mounting driver and accessories wired upto terminal block.IP 65 (b) 40 W Ca-III 2.00 Nos. 4819.72

221 Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. 4.00 Nos. 6173.12

with all internal connections, spreader tinned copper & complete erected in existing

16 G.M.S. housing. ICS=100% of ICU only Cat III

222 Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating

200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. 3.00 Nos. 16221.61

with all internal connections, spreader tinned copper & complete erected in existing

16 G.M.S.housing.ICS=100% of ICU only.Cat III

223 Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. and above at 415 V . having normal current rating

250A. with variable thermal & magnetic release suitable to work on A.C.supply 50 c/s.

with all internal connections, spreader tinned copper & complete erected in existing 2.00 Nos. 20946.39

16 G.M.S. housing. ICS=100% of ICU only Cat III

224 Supplying & erecting approved make Four Pole 415V change over switch interior for

panel mounting with operating mechanism A.C.23 duty confirming to IS for (E)250A / 1.00 Nos. 13353.21

225 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper

Busbars with four equal Nos. of electrolyte bus having current density not more than

1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour

insulating tape for phase sequence of following current carrying capacity, erected 0.50 Rn.Mtr 1961.42

with necessary bus bar supports /insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections. (A) Suitable for 100 Amp. Capacity

(B) Suitable for 200 Amp. capacity 1.00 Rn.Mtr 3202.71

(C) Suitable for 300 Amp. capacity 1.00 Rn.Mtr 4909.61

226 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and

having breaking capacity 10 KA to be erected in existing box. confirming to IS 20.00 Nos. 270.68

8828/1996 with ISI Mark. Ca-III

227 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 144.00 Nos. 112.11

existing box. confirming to IS 8828/1996 with ISI Mark Ca-III

228 Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having

10 KA breaking capacity & confirms to IS : 8828 in existing box having following 2.00 Nos. 295.93

capacity.(B) 40 Amp.Cat-III

229 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having

10KA breaking capacity & confirms to IS :8828 in existing box having following 4.00 Nos. 578.73

capacity.(a) 6 to 32 Amp.Cat-III

(b) 40 Amp. Ca-III 12.00 Nos. 638.32

230 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve)

having 10KA breaking capacity & confirms to IS :8828 in existing box having following 13.00 Nos. 668.62

capacity.(b)40 Amp. Cat-III

231 Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable for(B) three phase 8.00 Nos. 2913.85

incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b)

sheet steel double door (ii) 6 way

232 Providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic of quick action & tripping 24.00 Nos. 2235.13

with all advance feature & do not incorporate any electronic component. for

following Max. rating erected as directed (iI) 40 Amps. DP Cat-III

233 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 20.00 Kg 77.77

234 Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit complete with necessary 8 8.00 Nos. 368.65

SWG earth wire.

235 For using salt and charcoal / coke as required for pipe type earthing. 8.00 Nos. 171.70

236 Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved make OEM has to submit

test certificate) & having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:- <

1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time Necessary test report

must be submitted. (a) For Electrical Installation up to 440V in normal soil Length of

pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

237 Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board necessary IP-42 and above protection as

per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel including cutting, bending,

drilling, welding, riveting with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS,

suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & 4.00 Sq mtr 10468.65

earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with following size. (A) locally

fabricated panel board. (i) with 350 mm depth

238 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench /

pipe of following size of cables.(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 55.00 Mtr. 220.18

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) 105.00 Mtr. 378.75

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) 25.00 Mtr. 540.35

239 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (b) 4 core 6 Sq. mm

240 Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating

the fault all over the run and back filling the same and making the surface as normal 370.00 Mtr. 55.55

241 Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of

same material at required depth in existing trench for laying of cable. below ground

/ road surface for enclosing cable (A) 50 mm Outer dia

(C))90 mm outer dia 85.00 Mtr. 95.95

242 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for

PVC insulated armoured cable complete with out going tails, insulating tape etc for 40.00 Nos. 38.38

following size of cables.(B) 2 to 4 core 6 Sq. mm

243 Providing and, fixing heavy duty flange type brass double compression type cable

gland with rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables. (B) 3 & 1/2 core 35/50 Sq. Mm 18.00 Nos. 75.75

(E) 3 & 1/2 core 120 Sq. mm

244 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.(A) 1.5/ 160.00 Nos. 6.06

245 Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark

with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on

existing hook or clamp with earthing. [Make shall be approved by Engineer in charge] 107.00 Nos. 1596.81

246 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod

erected duly painted for fan complete with proper insulation without leakage and 107.00 Mtr. 108.07

247 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC

bars up to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy

Duty PVC box complete erected concealed in Ceiling with necessary finishing. 107.00 Nos. 108.07

248 Supplying & erecting approved make low noise decorative exhaust fan having square

frame ABS body with inbuilt lowers & square frame.250mm with 1350 RPM Cat.II 24.00 Nos. 1366.53

249 Providing recess in wall or window frame suitable for erection of Exhaust fan

complete with plastering and colour washing to match the colour of the wall or

window c0omplete with expanded metal in order to render the fitting in accessible 24.00 Nos. 189.88

and the room water-proof.

250 Supplying and erecting approved make Octagonal pole made from HR sheet steel.

The pole should be made as per IS. and shall be coated with hot dip galvanizing as per

IS 2629/2633/4759, suitable suspend local wind speed with integral Junction box

consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm

Din-Rail for MCB Mounting, stud type terminal and arrangement for cable

termination to be erected With Suitable foundation (Included) as per details given by

manufacturer considering site requirement. (C) 5 Mtr. Long 70 mm Top X 130 mm

bottom dia, 3 mm thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts

and 600mm long J-Bolt.Approx Pole weight 46 kg

251 Supplying and erecting Street light pole bracket comprising main B Class GI pipe of

4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve tubing of

approx. 45cms.length and suitable for 76.5mm/80mm/require size of pole top having

nuts and bolts for fixing the brackets and having spread of 0.5 mtr. Length with

deg.with vertical plane and suitable welded stiffener reducer and nipple with check

nut complete painted with one coat.of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms. [A] Single Arm bracket

[B] Double Arm Bracket 0.5 Mtr 2.00 Nos. 622.16

252 Supplying & erecting approved make SMC press moulded composite FRP. loop-in,

loop-out approx. 2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement having

locking arrangements with mounting clamp with nuts, bolts & washers suitable for 10.00 Nos. 476.72

erection on pole with cable clamps& earth bolt of following size of box. (c)150mm x

125mm x 100mm [deep]

253 Supplying & erecting Amplifier having following specification:

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type

LED Meter :5 LED Arrays 1.00 Nos. 11298.87

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with automatic

changeover from AC to Battery operation, duly protected by wrong Battery Polarity

connections. [[Approved by Competent Authority i.e. not Below the rank of Executive

254 Supplying & erecting recess wall mounting speaker with 5W rated input power 3.3 K.

Ohms / 3W impedance, 100 - 10000 Hz frequency response with 6 inch dia. cone type

8 ohms speakers duly fitted in ABS plastic cabinet of colour match with wall or ceiling

of following size. [[Approved by Competent Authority i.e. not Below the rank of 28.00 Nos. 591.86

Executive Engineer ] (b)Square shaped 260 x 260mm size speaker

255 Supplying microphones stands with sturdy mechanism, treble free movement &

positioning of microphones, free from rust with superior quality of chrome plating

with following size. [[Approved by Competent Authority i.e. not Below the rank of 2.00 Nos. 445.41

Executive Engineer ] (c)Fixed height 91 cms. & extendable up to 62 cms. with round

base of dia. 23 cms.

256 Supplying, installing and testing approved make microphone for All purpose, with

frequency response of 100 - 11000 Hz, having sensitivity 2.2mv / Pa & impedance

Ohms (LO- Z) supplied with quick detachable holder, 6 mtr twin core cable & 3 pin 1.00 Nos. 1284.72

XLR connector. [[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

257 SITC of 3LCD Lamp based projector having wxga (1280x800) or better resolution with

minimum white brightness of 3800 lumens and color brightness of 3800 lumens. The

projector should have minimum 1HDMI,1VGA input. Having contrast ratio of 15000:1

or more. the projector should have auto vertical key stone correction of +/-

degree and Manual Horizontal of +/-30 degree. the projector should have optical

lens, throw ratio 1.30-1.56:1. Zoom Factor of 1.2. Lens focus Manual having focal 2.00 Nos 33895.60

length 16.9mm to 20.28mm. projector should have features like AV mute slide, quick

corner and split function and should support wireless functionality with inbuilt wifi or

wifi dongle. [Approved by Competent Authority i.e. not Below the rank of Executive

258 SITC of universal Projector mounting kit, with necessary grouting, fasteners etc. with

adjustable height and suitable for all types of projectors. [Approved by Competent 2.00 Nos 6848.81

Authority i.e. not Below the rank of Executive Engineer ]

259 SITC of 120 inch Self Lock MW (8 x 6) Instalock Slow Retraction Screen, Aspect Ratio-

4:3 [Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

260 Providing and erecting approved make split air-conditioning unit consisting of copper

condensing unit with fan motor, hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit and blower

motor with its accessories by means of extra supplied proper insulated copper

tubing,drain PVC pipes suitable for ( cost includes powder coated Stand, Eco Friendly 9.00 Nos. 69133.49

green gas charging, 15A plug top & Remote Control) with necessary core

cutting(1)For ISEER Range (KWH/KWH)(3.1 to 3.99) Premium Category.(d) for 2.2 to

2.5 ton capacity

261 Supplying and erecting insulated pair of soft copper tubing open or concealed

including power and control cable,necessary PVC drain pipes for Split AC machine up

to 4 TR capacity

262 Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity

150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should

drop by 15˚C within a hour, The water cooler should be comprising of hermetically

sealed compressor, fan motor, condensing unit, water tank surrounded by 3.00 Nos. 55893.40

evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless Steel.

263 Supplying & erecting reverse osmosis (RO) water purification system with M.S.

powder coated pedestal frame, prefilter housing carbon filter suitable buster DC

pump, auto low & high pressure switches with following size of LPH capacity &

erected as directed with one year comprehensive maintenance guarantee. [D]

LPH with 3 phase Raw water pump of 500LPH @ 2.5kg/cm2 - (1N0 - Kirloskar 3.00 Nos. 77891.20

/CRI/Lubi), Dual media filter 10"x54" - (1 No), Micron cartridge filter 20" x 2.5" ( 1No),

High pressure pump 500LPH @ 10kg/cm2 - (1No - Shimge /CRI /Lubi), RO Membrane

housing with RO membrane of 40*40 - (1No), RO pressure tube 4" x 1E - ( 1No), 0 -

1200LPH Rotameter -(2 Nos), with Recovery Rate 50%.

264 Supplying and erecting horizontal / vertical mounting type storage water heater with

copper container housed in M.S./S.S./ABS body insulated with glass wool/puff

complete with heating elements,adjustable thermostats 300C to 850C, indicating

lamp, safety valve, fusible plug, etc.complete erected with coach bolts, nuts. washers 10.00 Nos. 15195.45

& cementation (E)50 Ltr. with 2 KW. heating element.Premium Category

265 Supplying and erecting approved make panel mounting type Digital Voltmeter having

3 digits LED display, 0 to 750 AC Volts range erected on existing panel board with 1.00 Nos. 1275.63

all connection, wiring etc .with manufacturers calibration certificate.

266 Supplying and erecting approved make panel mounting type Digital Ammeter having

3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to

operate on 500 Volt AC , erected on existing panel board with all connection, wiring 1.00 Nos. 1558.43

etc. with manufacturers calibration certificate.

267 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply

500 V on existing panel board with necessary connections. 2.00 Nos. 317.14

268 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio

15 VA burden erected in existing CRCA box duly secured with insulating materials 3.00 Nos. 274.72

connected to the meter.

269 Supplying and erecting approved make suitable panel indicator LED type lamp, lens

cover, complete erected with necessary connections. 3.00 Nos. 43.43

270 Providing & erecting open well horizontal mono block pump set with cast iron body,

complete for three phase submersible motor having.[C] For 3 HP 3 phase open well

horizontal mono block pump set suitable for 85 LPM to 270 LPM @ 11 mtr to 33 mtr 1.00 Nos. 15707.52

head suitable for 50/65 mm dia delivery pipe.Cat.II

271 Supplying & erecting approved make motor control cubical panel [Star delta] made

from 16G CRCA sheet duly epoxy powder painted inside and outside with hinged

doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty) main fuses.

Digital volt and current meter (in a single unit) with micro controller based control

unit and current sensing single phasing preventer electronic overload protection,

over voltage (Programmable) protection and under voltage (Programmable)

protection, prod less dry run protection programming facility for setting of all 1.00 Nos. 7250.79

parameter like overload current, high voltage limit, low voltage limit, dry run limit

with digital indication on seven segment LED display for any fault like over load, high

voltage, low voltage, dry running single crimped, electronic star delta timer, feather

touch start / stop push buttons to be erected on angle iron frame. Grouted on wall

the contactors will be of L& T, Siemens, BCH make only)(A) DOL up to 5.0 H.P.

272 Lowering of submersible motor pump set at the depth of following ,complete with

required. Nos. and size of casing pipes erected by means of proper chain pulley block

& pipe wrenches after checking of threads of each pipe with coupling to take the load

of the pump set and pipe assembly filled up with water (D)For Open well Horizontal 1.00 Nos. 856.48

submersible pump set for sump well (i) 1 HP to 5 HP

273 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

Submersible copper cable approved make of following Size.(B) 3 Core x 2.5 Sq. mm. 35.00 Mtr. 104.03

274 Supplying, & erecting C.I. swing, check type non-return (Reflux) Valve -ISI marked

suitable for following size.(A) 50 mm dia. 1.00 Nos. 1020.10

275 Supplying of following size of HEAVY UPVC column pipe with coupler and wire

lock.[B] 50 mm dia 35.00 RMT 359.56

276 Supply of following size of TOP & BOTTOM accessories i.e. Adaptor set (CI) long,

pump guard set, starter pipe Rubber ring for submersible pump & UPVC column pipe

as directed by Engineer - in - charge with necessary plumbing as desired.[D] 50 mm 2.00 Per Set 1489.75

277 Providing Erecting and testing of SAMSUNG/LG/SONY 4K(65 INCH) Smart TV/FULL HD

Pur Color 4K Refresh Rate,60Hz Native,Resolution 4K(3,840X2,160) HDR (High

Dynamic Range),HDR 10+ Support,Contrast-Mega Contrast-with screen

casting/mirroring with IR Remote-20W Speakar TYpe-2CH,Smart Service-Analog 2.00 Nos 124645.31

Tuner,Yes Connectivity, Bluetooth,Yes(BT5.2),HDMI-3,HDMI Audio Return Channel,

eARC/ARC, USB-1 X USB-A,RF in (Terrestrial /Cable input) 1/1 (Common Use for

Terrestrial) Smart TV

In Word : Four crore Fifty-Seven Lakh Twenty Thousand Five Hundred Fifty-Seven Rupees and Eighty-Eight Paise.

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated rate mentioned

above. Amount of my /our tender works out as under.

* Estimated Amount * Estimated Amount

put to tender put to tender

Deduct :…………% Below Add :………%Above

In Words …………………………………… In Words………………………………

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of

cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5 The amount of dismentalled credit materials at Rs. 794112 shall be deducted from first R.A. Bill.

6 The Contractor will have to submit the mix design for different grades his own cost befor execution as directed and to be approved From the

Engineer In Charge.

Deputy Executive Engineer Executive Engineer

Rajpipla (R&B) Sub-Division Rajpipla (R&B) Division

Rajpipla Rajpipla