Construcution of Additional Accomodation for Chief Engineer (KZ), HPPWD Dharamshala in Distt. Kangra, HP

Amount

Excavation in foundation, trenches etcetra by mechanical means (Hydraulic excavator)/ manual means in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, shuttering and pumping out water upto any depth or any quontam of water including slush which may be arise during de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as direction of Engineer-In-Charge and retuning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etcetra; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-in-Charge, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rates inclusive of octori, royality, Malkhana, toll taxes, GST and any other taxes imposed by the Government.

Cutting in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and un useful material and transportation of the un useful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipment and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used /removed as per the direction of the Engineer - in- charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Filling in plinth with sand of approved quality under floors including watering ramming, consolidating and dressing complete as per HPPWD specifications and as directed by Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders and lintels sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depths within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts Square, rectangular or polygonal in plan within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings as per Architectural drawing and the like within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etcetra with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetra with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls under any thickness within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Window sills,string courses ,bands, copings,bed plates, anchor blocks as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax ,GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in weather shade, Chajjas, corbels etcetra including edges as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax,GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (Forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 40mm (Forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, royality, octroi, toll tax,GST and any taxes imposed by the Government.

Stone filling in plinth with approved quality under floor including watering, ramming, consolidating and dressing complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying damp proof course 100mm (one hundred millimeters) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty decimal five millimeter) nominal size and curing complete including cost of form work and as required at site and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax,GST and any other taxes imposed by the Government.

Applying a coat of residual petroleum bitumen 80/100 (eighty/hundred) using 1.70 Kgs. (one decimal seven zero kilogramms) per square meter on damp proof course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil including carriage of materials within all leads, lifts and other incidental and as per the direction of Engineer-in-Charge. The rate inclusive of Malkhana, Octroi, Toll Tax Sales tax,GST and any other taxes imposed by the Government.

Coursed rubble masonry brought to courses with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement is to six sand is to twelve graded crushed/broken stone aggregate 20mm (twenty millimeter) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) and curing complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed and vibrated reinforced concrete work Grade M-25 (Twenty five) design mix to obtain the minimum compressive strength of 25 N/mm2 (twenty five newton) per square millimeter) with cement contents not less than 360 kg (three hundred sixty Killogramme) per cubic meter or as per approved desing mix and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in all works up to plinth level to give smooth surface mechanically mixed and vibrated including curring complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering,finishing and reinforcement,including admixtures in recommended proportion as per IS ; 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability for reinforced concrete work complete including carriage of material as per approved specification drawing , design and as directed by the Engineer in charge within all leads lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax,sale tax ,GST and any taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed and vibrated reinforced concrete work Grade M-25 (Twenty five ) design mix to obtain the minimum compressive strength of 25 N/mm2 (twenty five newton) per square millimeter) with cement contents not less than 360 kg (three hundred sixty Killogramme) per cubic meter or as per approved design mix and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in all works above plinth lavel to all floor level to give smooth surface mechanically mixed and vibrated including curring complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering,finishing and reinforcement,including admixtures in recommended proportion as per IS ; 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability for reinforced concrete work including of material within all leads lifts and other incidentals as per approved specification drawing , design and as directed by the Engineer in charge within all leads lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax,sale tax ,GST and any taxes imposed by the Government.

Providing and laying Tor steel reinforcement of TATA Tiscon /SAIL thermo mechanically coated bars of grade Fe 500D for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals for its completion up to all floor levels as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) and curing complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Half Brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in super structure above plinth level upto all floor level in cement mortar 1:4 (one cement isto four sand) and curing complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing coloured coated / anodised aluminium work for frame of doors, windows, ventilators and galazed partitions of Jindal / Hindalco aluminium with extrusion built up standard tubulars and other sections No.14081 make conforming to IS 733 and IS: 1285 anodised transparent or dyed to required shade according to IS : 1868 ( minimum anodic coating of grade AC- 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions at top bottom and sides with required PVC/ neoprence felt etcetera. Aluminium sections shall be smooth, rustfree, staight, mitred and jointed mechnically where ever required including cleat angle, aluminium, snap beading for glazing / panelling C.P. brass / stainless steel screws all complete as per architectural drawings design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing coloured coated aluminium work for frame of doors, windows, ventilators and galazed partitions with extrusion built up standard tubulars and other sections of Jindal / Hindalco approved make conforming to IS :733 and IS : 1285 anodised aluminium ( anodised transparent of dyed to required shade accordingly to IS :1868, minimum coating to grade AC- 15) ( AC- fifteen) , fixing with dash fasteners of required dia and size , including necessary filling up the gaps at junctions, i.e. at top , bottom and sides with required EPDM rubber / neoprence gasket etcetra . Aluminium section shall be smooth , rust free, straight, mitred and jointed mechanically wherever required including cleat, angle, Aluminium snap beading for glazing/ panellng , C.P. brass / stainless steel screws, all complete as per architectual drawingh and the directions of Engineer- in- charge ( Glazing, paneling and dash fasteners to be paid for separately) : For shuters of doors , windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/ neoprene gasket required all complete as per architectural drawings design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Glazing with glass glass panes of 6 mm thickness (weight not less than 15.00 kg/ sqm)(fifteen point zero kilograme per square metre) of Modi Guard / Saint Gobain / AIS / Atul or Gold plus in aluminium in door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket etcetra complete as per the architectural drawings and the directions of engineer-in-charge including carriage of material within all leads, lifts and other incidentals Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing Glazing with glass of 5 mm thickness (weight not less than 12.50 kg/ sqm)(twelve point five zero kilograme per square metre) of Modi Guard / Saint Gobain / AIS /Atul or gold plus in glazing in door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket etcetra complete as per the architectural drawings and the directions of engineer-in-charge including carriage of material within all leads, lifts and other incidentals Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixig glazing with frosted glass panes of 4mm (four milimertres) thickness of modi guard / Sant gobain / AIS / Atul or gold plus (weight not less than 10.00 kg/sqm (ten decimal zero kilograme per square metres) in aluminium door, windows, ventilators\ shutter and partition etcetra; with PVC/Neoprens gasket etcetra; complete including carriage of material within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing Fly proof shutters for doors, windows and clerestory windows stainless steel grade 304 with M.S. flat 15X3mm (fifteen into three milimetre) wire gauge with 0.5 mm dia (zero decimal five milimetre) diametre wire and 1.4mm (one decimal four milimetre) wide aperture on both sides complete including carriage of material within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 8 mm (Eight milimetre) anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm ( two hundred milimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. (Only weight of grill to be measured for payment).complete including carriage of material within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing M.S. channels Frames 75 X 40X4 mm (seventy five into forty in to four millimetre) M.S angle iron 25x20x3mm ( twenty five into twenty into three milimetre) for doors, windows, frames manufactured from M.S. T - section 25x25x3mm ( twenty five into twenty five into three milimetre) and Z- section with M.S. flat 75mm x4mm (seventy five into four millimetre) in combination as per drawing and design including hinges, jamb, lock jamb beed and if required thrashold including thrashold of M.S. angles means lugs, with split and tails to each jamb including iron butt hinges 2.5mm (two point five millimetre) thick with a provision of locking arrangement and shock observers as specified and applying a coat of approved steel primer after pre-treatment of the surface complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST and any other taxes imposed by the Government.

Providing and fixing factory made 30mm (thirty milimetre)thick pre laminated of Rajshri Prominance / Supreme PVC door shutter consisting of frame made out of M.S. tubes of 19 (ninteen)gauge thickness and size of 19 mm x 19 mm (ninteen into nineteen milimetre)for styles and 15x15 mm (fifteen in to fifteen milimetre)for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm (thirty milimetre)thickness, 70 mm (seventy milimetre)width out of which 50 mm (fifty milimetre)shall be flat and 20 mm (twenty milimetre) shall be tapered in 45 (forty five milimetre) degree angle on both side forming styles and 5 mm (five milimetre) thick, 95 mm ( ninety five milimetre) wide PVC sheet out of which 75mm ( seventy five milimetre) shall be flat and 20 mm (twenty milimetre) shall be tapered in 45 (forty five degree) on the inner side to form top and bottom rail and 115 mm ( one hundred fifteen milmetre) wide PVC sheet out of which 75 mm ( seventy five milimetre) shall be flat and 20 mm (twenty milimetre)shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (ten milimetre) (5 mm x 2 ) thick, 20 mm (twenty milimetre)wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm ( five milimetre) thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm (fifteen milimetre)wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm (five milimetre) thick PVC strip of 20 mm (twenty milimetre)width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etcetra complete as per direction of Engineer-in-charge, manufacturer's specification & drawing carriage of material within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GSTand any other taxes imposed by the Government. ..

Providing and fixing 12mm (Twelve millimetre) thick Phenol Bonded (Both Sides) Prelaminated BWP Grade Partical Board in Matt Finish Flat pressed three layeror graded wood partical board conforming to IS No. 12823 of action Tesa/ Greenlam/ Merinolam/Kitlam/Vista as per ISI and approved shade Grade-I type-II in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetra complete as per PWD specification, drawing and design. and entire satisfaction of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. Rate inclusive toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 25mm (Twenty Five millimetre) thick water proof commercial fly of century ply / Kitply / Dura ply / Marin including hinges, 6 mm (Six millimetre) thick hard wood edging all round and PGI sheet linning inside of for FF/ SDB including fixing with nickle plated piano hinges with screws etcetra complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Chargeincluding carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax,GST and any taxes imposed by the Government.

Providing and fixing the complete box of Cup board shall be made of 25mm (Twenty Five millimetre) thick water proof termite resistant plyof Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino ISI marked including shelves.Back side of board shall have 6 to 8 mm (Six to eight millimetre) thick water proof ply all the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edging. The shutter from all side shall be finished with 1mm (one milimetre)thick lamination ISI Marked of approved shade of Century / Greenlam /Action Tesa and 19 mm (Nineteen millimetre) thick water proof ply board of uniply / Greenply for shelves including hinges, handle,knob megnatic catcher complete ( the outer face of cupboard shall be measured and paid for ) as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Chargeincluding carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax,GST and any taxes imposed by the Government.

Providing and fixing 25 mm (twenty five millimetre) dia stainless steel curtain rod having wall thickness of 1.25mm (one point two five milimetres)with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etcetra wherever necessary complete as per approved shade including carriage of material within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 300x16mm (three hundred into sixteen millimeters) ISI marked aluminioum sliding door bolt I.S.I. marked anodi zed (anodic coating not less than grade AC-10as per IS 1868) transport or dyed to required colour or shade with nuts and screws as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing 200X10mm (two hundred into ten millimeters) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing 150X10mm (one hundred fifty into ten millimeters) aluminiukm tower bolt ISI marked andoised ( anadic coating not less than grade AC to as per IS 1868 transparent or dyed to required colour and shade the necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeters) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeters) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 250mm (two hundred fifty millimeters) aluminium hooks and eyes complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government. :

Providing and fixing aluminium die cast steel body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, with double speed adjustment with necessary accessories and screws etcetra complete complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government..

Providing and fixing aluminium hanging twin rubber floor door stopper, ISI marked, anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government..

Providing and fixing staircase railing having hand rail of 50 mm (fifty milimeteres) diametre fixed with 35mm (thirty five milimetre) diametre stainless steel pipe as per detail in combination of 35X35mm (thirty five into thirty five milimetre) stain less steel square pipe and 15/20 (fifteen into twenty ) stainless steel baluster in stair case complete in all respect as per specification, drawing, design and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing handrail 50mm (fifty milimetre) diametre Stainless steel (SST) hollow pipe handrail slip resistant with round ends at two level at 75cm to 90cm (seventy five centimetre to ninety centimetre) height welded to 25mm ( twenty five milimetre) diametre stain less steel hollow pipe balusters. It should extend 30cm (thirty centimetre) beyond the top and bottom of the ramp as per detail of approved drawing , design specificationand direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 19 mm (nineteen milimetrea) thick polished Chima pink / Grey granite in combination with Lakha rad / Blakc granite as per detail having gang saw cut, mirror polished, premoulded and prepolished, machine cut in flooring of required size of approved shade, colour and texture laid over 20 mm(twenty milimeres) thick base of cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to flooring to give high gloss finish etcetra complete as per specification, drawing, design and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing HDF flooring of Restile/ Nitco/ Kajaria / Orient of Bell/ Simpolo/Johnson / Rak as per approved shade & design of this office laid over Rcc / CC base to be sepertelly complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 19 mm (nineteen milimetrea) thick polished Grey / china pink Granite having semi round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for Pantum / kitchen / platforms / workshop and sintex locations of required size of approved shade, colour and texture laid over 20 mm(twenty milimeres) thick base of cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetra complete as per specification, drawing, design and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 19 mm (nineteen milimetrea) thick polished Grey / china pink Granite having uniform nosing/ edging in tread of steps in riser of steps single slab as per detail gang saw cut, mirror polished, premoulded and prepolished, machine cut of required size of approved shade, colour and texture laid over 20 mm(twenty milimeres) thick base of cement mortar 1:4 (one cement isto coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetra complete as per specification, drawing, design and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying 400x400x12 mm (four hundred into four hundred into twelve millimetre) Antiskid matt finish floor Tiles of Nitco/ Kajaria/ Johnson /AGL / Somany/ Orient Bell in/ Simpolo in flooring laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights as per approved specifications, drawing and design and entire including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying (600x 600mm) (six hundred into six hundred milimetres) Antiskid matt finish tiles in flooring of Nitco/Kajaria / AGL / Simpolo / Johnson / Agl / Somany , orinent & bell as per approved shade and design of the office (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty milimetres)thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate of three point three kilograme per square metre) including grouting the joints with white cement and matching pigments etcetra complete sqm including grouting the joints with white cement and matching pigments etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying 300x300 mm (three hundred into three hundred millimetre) Antiskid Cermic Tiles of Premimum quality of Nitco/ Kajaria/ Johnson /AGL / Somany/ Orient Bell in/ Simpolo / Rak flooring laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights as per approved specifications, drawing and design and entire including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying 300x300x25mm (Three hundred into three hundred into twenty five millimetre) labrador design(Rainbow series) of NTC/ unistone / Atlantic slab flooring on 20mm (twenty millimetre) average thick ( fixed on floor, Ramp) cement Mortar 1:3 (One cement isto three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing, cutting and moulding complete in all respect as per specification drawing, design and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying 60mm( sixty milimetre) thick factory made cement concrete interlocking paver block of NTC/Atlantic / unistone vibro compacted upto M -50 (M - fifty) grade includng border of kurb block gry or coloured over sub base of concrete with 25mm (twenty milimetre) thick compacted bed of coarse sand, filling the joints with line sand etcetra all complete as per specification, drawing, design and direction by the Engineer in charge. as per the direction of Engineer-in-charge .The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals. The rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying (600x 600mm ) (six hundred into six hundred milimetres) Antiskid matt finish vetrified tiles of Nitco /Rak/Kajaria / Orient -Bell/AGL/Simpolo /Johnson/Somany of approved shade and design in dado skirting ,riser of steps as per approved shade and design of the office (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty milimetres)thick cement mortar 1:4 (one cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate of three point three kilograme per square metre) including grouting the joints with white cement and matching pigments etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying 300x300 mm ( three hundred into three hundred milimetre) Ceramic Glazed tiles of Kajaria /Johnson / Nitco /Orient /Bell / Somany / AGL /Simpolo with in dado/ upto 205cm (two hundred five (twenty centimetre) height (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty milimetres) thick cement mortar 1:4 (one Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( at the rate of three point three kilograme per square metre) including grouting the joints with white cement and matching pigments etcetra, complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying 300x600mm ( three hundred into six hundred milimetre) Ceramic Glazed tiles of Kajaria /Johnson / Nitco /Orient /Bell / Somany / AGL /Simpolo with tiles in dado upto 205 cm (two hundred five centimetre) height with one boarder matching contrast at top and in WC upto 150 cm ( one hundred centimetre) height (thickness to be specified by the manufacturer), as per approved shade of this office in cement mortar 1 :3 ( one hundred isto three sand) laid over and jointed with neat cement slurry finihsed with flush pointing in white cement and matching pigments etcetra to mathc the shade of tiles complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying 12mm (twelve millimetre) thick Unistone / NTC / Atlantic tile cladding on wall surface with 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry to match the stone including scaffolding and cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- In-Charge .Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 0.60mm (zero point sixty millimeter) thick prepainted steel sheet ISI marked Z-120 (Z-one hundred twenty) of TATA / Durashine/ sail/ Relience/Jindal in roofing over steel trusses with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (TWENTY) microns over 5 (five) microns primer coating to back coat of polyster and 5 (five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm ( six milimeter) diameter with prepainted limpet and rubber washer complete with all accessories as required as per direction of Engineer-In-charge including carriage of material with in all lead and lift and other incidental as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing pre-painted steel sheet ridges (factory made) having proper Gola shape or corrugation of steel sheet hips of TATA Durashine / Reliance / Jindal Steel corrugation of steel sheet 60cm (sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regulat modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers etcetra complete in all respect as per approved specifications, drawing and design and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing prepainted valleys 90cm (Ninty centimeters) overall with 0.60mm (Zero point six zero millimeter) thick prepainted steel sheet ISI marked Z-120 (Z-one hundred twenty) prepainted steel sheet of TATAdurashine/ sail/ Relience/Jindal pre painted steel sheet in roofing (kolermetal or equivalent make) with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating+back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (six millimeter) diametre with prepainted G.I limpet and bitumen washer complete with all accessories as required as per direction of Engineer-In-charge and as per HPPWD specifications, including carriage of materials within all leads, lifts, and other incidental. The rate including Octroi, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing and fixing TATA/Durashine/ sail/ Relience/Jindal 30cm (Thirty centimetre) wide 25cm (Twenty five centimetre) deep plain G.I. sheet gutter of 0.60mm (zero decimal six zero millimetre) thick sheet fixed with iron brackets 40X3mm ( forty into three milimetre) bolts, nuts and washers etcetra having dome shape gratting including making necessary connections with rain water pipe complete including cost and carriage of material with in all leads, lifts and other incidentals as per specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing M.S.( mild steel ) B.P. sheet 2.0mm ( two milimetre) thick of TATA/Durashine/ sail/ Relience/Jindal for eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-Incharge (Base members of steel work shall be measured and paid separately) including fixing complete as per cost and carriage of material with in all leads, lifts and other incidentals as per PWD specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing flashing 38 cm ( thirty eight milimetre) overall with 0.60 mm ( zero sixty milimetre) thick of Sail /Tata Durashine / Reliance / Jindal Steel with hot dipped metalic zinc coated prepainted sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating includig fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete as per cost and carriage of material with in all leads, lifts and other incidentals as per PWDspecifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Structural steel work of Tata/Tiscon/Sail /Jindal / Reliance riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per specification, drawing, design and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetres) diametres high pressure PVC spigot and socket, rain water pipes ISI marked of Supreme/finolex/vectus/ Relpipe (Reliance) having pressure not less than 6kg /cm2 (six kilogramm per centimetre square) including fixing with approved adhesive etcetra complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing on wall face 150 mm (One hundred fifty millimetre) diametre P.V.C.plain bend on wall face PVC (D-plast) rain water pipes of Supreme/Finolex/Prince /Relpipe / vectus including filling the joints with approved adhesive complete as per PWD specification, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing on wall face 150 mm (One hundred tenfifty millimetre) diametre P.V.C.shoe on wall face PVC (D-plast) rain water pipes of Supreme/Finolex/Prince /Relpipe (reliance) / vectus including filling the joints with approved adhesive complete as per PWD specification, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing unplasticised PVC Pipe clips / Clamps of Supreme/Finolex/ Prince/Relpipe (reliance) / vectus of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (fifty into fifty into fifty milimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement isto four coarse sand) and making good the wall etcetra complete including carriage of material within all leads, lifts and other incidentals. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 600 X600 X 5mm (six hundred into six hundred into five millimetre) designer board of Everest (fiber cement board) ceiling with painted G.I. Channel framing @ 600mm (six hundred millimetres) centre to centre including of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x600x16mm (six hundred into six hundred into sixteen milimetre) Dune RH 99 tiles of armstrong // 600x600x15 (six hundred into six hundred into fifteen milimetre) Mineral fibre tile of Gyproc / 600x600x15 (six hundred into six hundred into fifteen milimetre) Cerss soft fibre tile of Dexune with Wood wool Backing and fix with Power coated G.I. frame work @ 600mm (six hundred milimetre) centre to centre in combination with 150x12mm (one hundred fifty into twelve milimetre) thick rai wood border as per pattern and detail complete as per approved drawing , design and specifications as per direction of Engineer-In -Charge .The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing acoustical panels of 600x1200x25 mm( six hundred into twelve hundred into twenty five millimeters) of dexune acoustical / Himalyan acoustical panels including frame workas per pattern and detail fixed with steel screw complete in all respect as per detail drawing and specification as per direction of Engineer-In -Charge .The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 8mm (eight milimetres) thick teak ply panelling over 50x31mm (fifty into thirty one millimetres) soft wood frame work at 60cm (sixty centimetre) centre to centre and decorative teakwood beading over teak ply of size 25x12mm (twenty five into twelve millimetres) having moulding of size 25x12mm (twenty five into twelve millimetres) having moulding on bothside and cornices/ edging 55x30mm (fifty five into thirty millimetres) teak wood beading complete in all respect within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing water proofing treatment shall be done in two coats apply First coat of Dr. Fixit Torch SHIELD ( P - 3160- 3mm ) to the clean and saturated surface maintaining a coverage 0.60 sqm (Zero decimal six zero square meter) per kilogram to achieve 1mm (one millimeter) thickness this coating shall also be executed up to 300mm ( three hundred milimetre ) vertically. The 2nd coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of 1st coat then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement ist four sand) and mixed with Pidiproof LW at the rate 200ml (two hundred millimetre) per 50 (Fifty kilogram) of cement over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky.complete as per approved drawing, design including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and rounded angles in all girth and finished even and smooth as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:4 (one cement isto four sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Plaster to ceiling in cement mortar 6 mm (six milimetres) thick cement mortar 1:3 (1 Cement : 3 fine sand). complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and applying 20mm (Twenty millimeter) thick cement plasterin pattern cement mortar 1:4 (one cement isto five sand) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge. including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and applying white cement (Birla white/JK) /based putty of average thickness 1 mm ( one milimetre) , of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting Steel work with enamel paint of Asian/Nerolac Paint to give an even shade on new steel and other metal surfae two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate zero decimal ninety litre per ten square metre ) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate zero decimal eighty litre per ten square metre ) of approved brand and manufacture complete including cleaning the surface of all dirt , dust and other foreign matte, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting woodwork with enamel of Asian/Nerolac Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm ( at the rate zero decimal ninety litre per ten square metre ) over an under coat of primer applied @ 0.75 ltr/10 sqm (at the rate zero decimal seventy five litre per ten square metre) of approved brand and manufacture complete including cleaning the surfaces of all dirt dust and other foreign matter ,as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Finishing walls with100%weather proof exterior emulsion paint of Asian / Dulux / Berger / Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm ( at the rate one decimal forty three litre per ten square metre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm ( at the rate zero decimal ninety litre per ten square metre) complete as per Architectural drawing ,design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats with acrylic washable emulsion of Asian / Dulux / Berger / Nerolac Suraksha paints based water thinnable sealer of approved brand and manufacture for interior shade on undecrated concrete/ stone/ plaster of wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall painting (two coats) with acrylic premium emulsion paint Asian/Nerolac/ Dulux/ Berger paints / Nerolac paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying Painting two or more coats with acrylic emulsion of Asian / Dulux / Berger / Nerolac Suraksha paints based water thinnable sealer of approved brand and manufacture for interior painting on undecrated concrete/ stone/ plaster of wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing plinth protection with 40mm (forty millimetre) thick interlocking paver block of NTC / Atlantic with 23cm(twenty three centimetre) dia half round reinforcement cement concrete pipe for drainage purpose fixed over 10cm(ten centimetre) thick cement concrete 1:4:8 ( one cement isto four sand isto eight graded stone) in bedding/ haunching for pipe complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work invertical surface and mass concrete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M - twenty) design mix to obtain the compressive strength of 20N/MM2 (Twenty Netwon per Square millimetre) for reinforced cement concrete work the cement contents not less than 330 kg ( three hundred thirty kilogrma ) per cubic metre or as per approved desing mix for work upto plinth level to give a smooth surface mechnically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS : 9103 to accelerate, retard steeing of concrete , improve work ability without impairing strength and durability for reinforced concrete work complete including carriage of material within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Excavation in drains and channels etcetra in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturated soil including chiseleing or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layer when required into plinths sides of foundations etcetra Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- Incharge, within all leads, lifts of materials and other incidentals. As per approved drawing, design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 455x610mm (four hundred fifty five into six hundred ten milimetres) light duty rectangular cast iron man hole with frame cover weight 38kg (Thirty eight kilograme)single seat including entire carraige of material complete , as per the direction of Engineer-in-charge .The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals. The Rate inclusive toll tax, GST and any other taxes imposed by the government.

Constructing brick masonry chamber for under ground C.I. (Cast iron) inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5(One cement isto Five sand) C.I. (cast iron) cover with frame(light duty) 355x610mm(Three hundred fifty five into Six hundred ten millimetres)internal dimensions total weight of cover and frame to be not less than 38Kgs (Thirty eight Kilograms) weight of cover 23 Kgs (twenty three kilograms)and weight of frame 15 Kgs (Fifteen kilograms) RCC (Reinforced cement concrete) top slab with 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size mix foundation concrete 1:5:10 (One cement isto Five sand isto Ten graded crushed/broken stone aggregate 40mm(Forty millimetres nominal size) inside plaster 15mm ( Fifteen millimetres) thick with cement mortar 1:3 ( One Cement isto three sand) finished smooth with a floating coat of neat cement on walls and bed concrete etcetera. complete inside dimensions 455x610mmx450mm (Four hundred fifty five into Six hundred ten into Four hundred fifty millimetres) deep single pipe line as per H.P.P.W.D specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying in position cement concrete 1:4:8 (one Cement isto four coarse sand) isto eight graded stone aggregate 40 mm (forty milimetre) nominal size for PVC pipes of the 110 mm (one hundred ten milimetre) internal diameters including concrete for bedding. As per approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 110 mm (One hundred ten millimetre) diametre (to level or slopes) PVC (D-plast) sewer pipes jointing with approved adhesive high pressure of Supreme/Finolex/Vectus /Relpipe (reliance) working pressure not less than 4.5 kg/sqm (four decimal five kilogram per square centimetre) I.S.I Marked including fixing with approved adhesive etcetra complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing in position water pump 1.00 HP (one horse power) capacity of kirloskar make I.S.I. mark including all necessary fitings required at site complete in all respect within all leads, lifts of materials and other incidentals, as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying in trenches, galvanised mild steel tubes 15mm (fifteen millimetre) diametre including fiftings as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 1620 (20mm OD pipe) Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetra with clamps at 1.00 metre spacing. This includes the cost of cutting chases and including testing of joint complete as per direction of the Engineer - in - charge for concealed wor including cutting chases and making good the wall etcetra. including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 2025 (20mm OD pipe) Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetra with clamps at 1.00 metre spacing. The cost of cuttng chases and including testing of joints complete as per direction of the Engineer-in -charge for concealed work includng cutting chases and making good the wall etctera , including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST and any other taxes imposed by the Government.

Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40nmm (Twenty milimetres to Forty milimetres)nominal bore by providing and fixing tees including cutting and threading the pipe complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty milimetres) diametres high pressure PVC spigot and socket, waste and ventilating pipes light gradeISI marked of Finolex / Relpipe (Reliance ) / Vectus having pressure not less than 6kg /cm2 (six kilogramm per centimetre square) including fixing with approved adhesive etcetra complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten milimetres) diametres high pressure PVC spigot and socket, waste and ventilating pipes light gradeISI marked of Finolex / Relpipe (Reliance ) / Vectus having pressure not less than 6kg /cm2 (six kilogramm per centimetre square) including fixing with approved adhesive etcetra complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five milimetres) diametres high pressure PVC spigot and socket, waste and ventilating pipes light grade ISI marked of Finolex / Relpipe (Reliance ) / Vectus price 4.6mm thick having pressure not less than 6kg /cm2 (six kilogramm per centimetre square) including fixing with approved adhesive etcetra complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetres) PVC holder bat clamps ISI marked of Finolex / Relpipe ( reliance) / vectus of approved design to P.V.C. rain water pipe embedded in and including cement concrete blocks 10x10x10cm ( ten into ten into ten centimetre ) of cement concrete 1:2:4 (One cement istoTwo sand isto Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size and cost of cutting holes and making good the walls etcetra including carriage of material within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetres) PVC holder bat clamps ISI marked of Finolex / Relpipe ( reliance) / vectus of approved design to P.V.C.. rain water pipe embedded in and including cement concrete blocks 10x10x10cm ( ten into ten into ten centimetre ) of 1:2:4(One cement isto Two sand isto Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size and cost of cutting holes and making good the walls etcetra including carriage of material, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five milimetres) PVC holder bat clamps of Finolex / Relpipe (reliance) / ecturs of approved design to P.V.C.. rain water pipe embedded in and including cement concrete blocks 10x10x10cm ( ten into ten into ten centimetre ) of 1:2:4(One cement isto Two sand isto Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size and cost of cutting holes and making good the walls etc; within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetres) diametres P.V.C. I.S.I. marked heal rest of Finolex / Vectus / Relpipe (Reliance ) including filling the joints approved adhesive including fixing and carriage of material , within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetres) diametres P.V.C. I.S.I. marked heal rest of Finolex / Vectus / Relpipe (Reliance ) including filling the joints with including fixing and carriage of material approved adhesive within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetres) diametres P.V.C.Collar of Supreme/Finolex/ Relpipe (Reliance) including fixing with approved adhesive complete including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetres) diametres P.V.C.Collar of Supreme/Finolex/ Relpipe (Reliance) including fixing with approved adhesive complete including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 75mm (seventy five milimetres) diametres P.V.C.Collar of Supreme/Finolex/ Relpipe (Reliance) including fixing with approved adhesive complete including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five milimetres) diametres P.V.C .Cowl of Supreme/Finolex/ Relpipe (Reliance) including fixing with approved adhesive complete including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110 x 90mm (One hundred ten into Ninety milimetres) P.V.C. I.S.I. marked floor trap of Finolex / Vectus / Relpipe (Reliance) ISI marked (confirming to BIS-14735-99) of self cleaning design including with approved adhesive cost of cutting and making good walls and floors complete including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110 x 75mm (One hundred ten into seventy five milimetres) P.V.C. I.S.I. marked floor trap of Finolex / Vectus / Relpipe(Reliance) ISI marked (confirming to BIS-14735-99) of self cleaning design including with approved adhesive cost of cutting and making good walls and floors complete including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type)No 20087(S - 10 ) Size 57 X 35 X 39 cm (fifty seven into thirty five into thirty nine centimetres)with seat and lid, 10 (ten) litre low level white vitreous PVC flushing cistern (sleek Plus) fixed with Jet pressure of Hindware , Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm (forty milimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required complete, including cutting and making good the walls and floors wherever required including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing vitreious china three half staff urinal large flat back No. 60002of size 39X37.5X59 cm (thirty nine into thirty seven point five into fifty nine centimilimetre) with 10 (ten) litre PVC automatic flushing cisten of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details with fittings standred size C.P. brass flush pipe,spreaders with union and clamps (all in C.P. brass) with waste fitting as per IS : 2556,C.I. trap with outlet grating and other coupling in C.P. brass including painting of fitting and cutting and including good the wall floors wherever required including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 600mmx300mm ( six hundred milimetre into three hundred milimetre) vitreous china division plate for urinals of Hindware /cera/Jaquar of star white / snow white shade complete including carriage of material within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing vitreous China wash basin Delta No. 10010 of size 55x40mm (Fifty five is to forty milimetres) without pedestal of Hindware / Cera /Jaquar of star white / Snow white shade with mirror above and as shown in the drawing / as per details with single 15 mm (fifteen millimetre) C.P. brass pillar tap with C.I. brackets, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require including carriage of material ( Mirror to be paid for separately) , within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing wash basin White Vitreous China Flat back wash basin Garnet no 10080 size 580x 430 mm ( five hundred eighty into four hundred thirty milimetres) ( Under counter Basin ) of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details with single 15 mm (fifteen milimetre) C.P. brass pillar tap with C.I. brackets, 32 mm (thirty two milimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing vitreous China pedestal of Hindware / Cera /Jaquar of star white / Snow white shade and as shown in the drawing / as per details including painting of fittings and brackets, cutting and making good the walls wherever require or direction by Engineer in charge including of carriage of materials within all leads, lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink of Diamond / Unik with drain board 510x1040 mm (five hundred ten into one thousand forty milimetres) bowl depth 250 mm (two hundred fifty milimetre) with C.I. brackets and stainless steel plug 40 mm (forty millimetre) , including painting of fittings and brackets, cutting and making good the walls wherever required or direction by Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimetre) nominal size diameters rubber plug for wash basin (Heavy duty makes ISI marked is No. 8931 7893) or direction by Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimetre) diametre M.I. union for wash basin or sink complete in all respect direction by Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 32 mm (thirty two millimetre) diametre C.P. Brass waste of Continental series of Jaquar / Classic series of Hindware /floral series of Cera / Vintage series of Kerovite & Hindon series of Jal for wash basin and sink complete (New work) or direction by Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) diametres C.P. Grating of Continental series of Jaquar / classic series of Hindware /floral series of Cera / Vintage series of Kerovite & Hindon series of Jal for gully floor or Nahni trap complete or direction by Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 600x450 mm (six hundred into four hundred fifty milimetres) beveled edge mirror of Continental series of Jaquar / classic series of Hindware /floral series of Cera / Vintage series of Kerovite & Hindon series of Jal of superior glass (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete or as per the direction of Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass towel rail 600X20 mm (six hundred into twenty milimetres) of Continental series of Jaquar /classic series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete as per the direction of Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 600x120x5 mm ( six hunderd into one hundred twenty in to five milimetres) glass shelf Continental series of Jaquar /classic series of Hindware /floral series of Cera / Vintage series of Kerovite & Hindon series of Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (forty millimetre) long screws, rawl plugs etcetra complete.within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper holder of Continental series of Jaquar / Classic series of Hindware /floral series of Cera / Vintage series of Kerovite & Hindon series of Jal complete, as per direction of Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 8mm (eight millimetre) diametre CP Jet spray make of continental series of Jaquar / Classic series of Hindware /floral series of Cera / Vintage & Hindon series of of 1.00 mtr (one point zero zero metre) tube with SS trangular plate of European type W.C. of quality complete as per the direction of Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen milimetres) nominal bore C.P. brass bib cock tap of continantal series of Jajuar/Contess series of Hindware/ Ocean series of Cera/ Vintage series of Kerovit and Hindon series of Jal complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government..

Providing and fixing 15 mm (fifteen milimetre) nominal bore C.P. brass stop cock (concealed) Continental series of Jaquar / classic series of Hindware series of Cera / Vintage series of Kerovite & Hindon series of Jal of standard design and of approved make conforming to IS:8931 complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen milimetre)nominal bore C.P. brass pillar tab cock (concealed) of Continental series of Jaquar / Classic series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal of standard design and of approved make conforming to S:8931complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen milimetre)nominal bore C.P. brass angle valve of Continental series of Jaquar /classic series of Hindware /floral series of Cera / Vintage series of Kerovite & Hindon series of Jal for basin mixer and geyser points of approved quality conforming to 8931complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government

Providing and fixing 15mm (Fifteen millimeters) nominal bore C.P.brass full way valve with wheel complete Continental series of Jaquar / classic series of Hindware /floral series of Cera / Vintage series of Kerovite & Hindon series of Jal of standard design and of approved make conforming to S:8931complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen milimetre)nominal bore C.P. brass valve (Horizontal plunger) type High pressure with polythene plastic floats of Continental series of Jaquar / Classic series of Hindware / Floral Series of Cera / Hindon series of Jal of standard design and of approved make conforming to S:8931complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing PVC connection pipe with brass unions ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore of Finolex / Relpipe (reliance) /vectus complete , within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 32 mm (thirty two millimetre) diametre P.V.C.flexible waste pipe of Finolex / Relpipe / (Reliance ) / Vectus for sink or wash basin including P.V.C. waste fittings complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and placing 1000 liter (one thousand liter) capacity on terrace (at all floor levels) polyethylene water storage tank of three layers of Supreme / Finolex/ Vectus IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including fittings and without the base support for tank includes all leads, lifts of including carriage materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 150mm (one hundred fifty milimetre) PVC pipes including fixing with approved adhesive and testing of pipes and joints complete as per direction of Engineer in charge including carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying bedding / haunching with cement concrete 1:5:10 (one Cement isto five coarse sand) isto ten graded stone aggregate 40 mm (forty millimetre) nominal size for PVC pipes of the 150 mm (one hundered fifty milimetre) internal diameters As per approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement isto one decimal five coarse sand (zone- III) isto three graded stone aggregate 20 mm ( twenty milimetre) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve milimetre) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm ( ninety into eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm ( four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg (thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) (fifteen millimetre) ) With Sewer bricks conforming to IS : 4885 including carriage of material within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement isto one decimal five coarse sand (zone- III) isto three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20 mm ( twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm ( one hundred twenty into ninety centimetre) and 90 cm ( ninety centimetre) deep including C.I. cover with frame (medium duty) 500 mm ( five hundred milimetre) internal diameter, total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilogram) (weight of cover 58 kg (fifty eight kilogram) and weight of frame 58 kg (fifty eight kilogram) ) : With Sewer bricks conforming to IS : 4885 including carriage of matieral, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and Fixing Charomium plated 40mm (forty millimetres) dia steel pipe for grab bars at 78cm (seventy eight centimetres) height metres M.S. plate as per details at the position of the seat and Wash Basin complete within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GSTand any other taxes imposed by the Government.

Ravi Kumar

Ujjawal Singh

M/s Kulwinder Singh and Co.

Ashwani Kumar