Day to day maint and petty repairs of OTM and Md Accn under AGE B/R-II of GE Dehradun.

Amount

Supply and Fixing in repairs bib cock PTMT standard 15 mm dia with capastan head, complete male or female as reqd, complete all as specified and directed.

Supply and Fixing in repairs short body bib cock brass chromium plated 15 mm dia with capastan head, screwed down high pressure complete all as specified and directed.

Supply and Fixing in repairs long body bib cock brass chromium plated 15 mm dia with capastan head, screwed down high pressure complete all as specified and directed.

Supply and Fixing in repairs 15 mm dia angle cock/ stop valves chromium plated with capstain head screwed down high pressure complete all as specified and directed.

Supply and Fixing in repairs 15 mm bore Pillar cocks chromium plated brass with capstain head screwed down high pressure complete all as specified and directed.

Supply and fix in repair wall mixer/L bend mixer 15 mm dia, Brass Chromium plated complete all as specified and directed.

Supply and fix in repair centre hole basin mixer 15 mm dia, Brass Chromium plated complete all as specified and directed.

Supply and fix in repair sink mixer 15 mm dia, Brass Chromium plated complete all as specified and directed.

Supply and fix in repair Waste fittings/sink couplings 32 mm brass chromium plated for sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fix in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed.

Supply and fix in repairs Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel chormium plated or aluminised hinging device complete all as specified and directed.

Supply and fix in repair Vitreous China wash hand basin, white, flat back, size 550 x 400 mm including waste pipe coupling and waste up to floor trap and fixed complete all as specified and directed.

Supply and fix in repair vitreous china rimless single piece WC of size 385 x 720 x 710 mm with UF sift close slim seat cover, hinges, fixing accessories and dual flushing cistern complete all as specified and directed.

Supply and fix in repair Looking Mirror 5 mm thick glass of size 600 x 450 mm fixed on commercial ply wood 6 mm thick with PVC/wooden moulding beading fixed to wooden plugs with chromium plated brass screws and cup washers and fixed complete all as specified and directed.

Supply and fix in repair 10 ltr capacity PVC low level flushing cistern valveless, syphonic action type, white, with inlet, ball valve, float and handle including brackets and fixed complete all as specified and directed.

Supply and fix in repairs health faucet mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Taking down shutters of any description n exc 1 sqm and refixing in same opening after easing, adjusting and replacement of minor nails etc, complete all as specified and directed.

All as per serial item No 17 here-in-before but exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

Resecuring or easing & adjusting, without taking down shutter of any description n exc 1 sqm each complete all as specified and directed.

All as per item ser No 19 here-in-before but exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutter exc 1.5 sqm and n.exc 4 sqm each (without taking off shutters from the frame) and removing from the site complete all as specified and directed.

All as per ser Item No 21 here in above but n.exc 1.5 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.0 sqm and n.exc 2.0 sqm each leaf and removing from the site complete all as specified and directed.

Supply and fix pressed steel door frame of size 105x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed.

Supply and fix pressed steel door frame of size 125x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed.

Supply and fix Factory made 30 mm thick plain framed panelled shutter (two panel) of second class hard wood rail and style with lock rail and panel of 9 mm BWP commercial ply. The size of rail and style as per IS : 1003 Part I, klin seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed.

Supply and fix 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with nails complete all as specified and directed.

Supply and fix PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening, as per specification and drawing complete all as specified and directed.

Supply and fix Factory made solid panel PVC door shutter 24 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded both side prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing complete all as specified and directed.

Supply and fix SS Butt Hinges medium weight 100 mm fixed to steel/wooden shutters complete all as specified and directed.

Supply and fix stainless steel barrel tower bolts 150 mm size with bright bolt, complete all as specified and directed.

Supply and fix for stainless steel handles 150 mm size, complete all as specified and directed.

Supply and fix stainless steel sliding door bolts 'bolt type' 250 mm size and including 6 nuts and bolts complete, all as specified and directed.

Supply and fix in repair Plain fillets 2nd Class hardwood not exc 3 sq. cm, square, rectangular or triangular in section, chamfered or rounded on one edge or face, secured with nails and fixed complete all as specified and directed.

Supply & fix in repair 20 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends complete all as speccified and directed.

Supply and fix in repair stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails complete all as specified and directed.

Supply and fix in repairs cast iron body hydraulic door closers universal type designation No 3 suitable for door shutters of 851 to 1000 mm wide complete all as specified and directed.

Supply and fix in repair 150mm dia Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Supply and fix in repair MS Rat tail pattern/ helical doors spring 150 to 200 mm, ordinary springs including roller and roller plate complete all as specified and directed.

Supply & fix in repairs stainless steel peg set of five with chromium plated back plate 304 grade, 40mm wide fixed with chromium plated screw complete all as specified and directed.

Supply & fix in repair 18 mm thick PVC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesivecomplete all as specified and directed.

Supply & fix in repair 18 mm thick PVC board both side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesivecomplete all as specified and directed.

Supply & fix in repair 6 mm thick PVC board both side plain white colour as in cub board selves etc fixed with screws, solvent cement/ adhesive , complete all as per specifications & directed by Engr-in-Charge.

Supply and fix in repair chrome plated stainless steel wire basket (storage basket) pull out type for large utensils of size 480 x 500 x 150 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed.

Supply and fix in repair chrome plated stainless steel wire basket (plate basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed.

Supply and fix in repair chrome plated stainless steel wire basket (cutlery basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed.

Supply and fix in repair chrome plated stainless steel wire basket (grain trolly basket) pull out type for large utensils of size 480 x 500 x 200 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed.

Supply and fix Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and directed.

Supply and fix magnetic catcher and striking plate including letting in and fixed complete all as specified and directed.

Supply and fix Continuous (PIANO) hinges, stainless steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified as directed.

Supply and fix 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size pane and fixed including hacking out old glass complete all as specified and directed.

All as per serial item No 53 here-in-before but frosted glass complete all as specified and directed.

Material and labour for vitrified ceramic coloured tiles 8-9 mm thick dark shed (square/rectangular) polished area of each tiles not exceeding 0.72 sqm, in floor etc. set and jointed in neat cement slurry @3Kg/Sqm and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

All as per item No 55 here in above but as in skirting over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Material and labour for non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6-7 mm thick in floor, set and jointed in neat cement slurry @3Kg/Sqm and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

All as per item No 57 here in above but as in skirting over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Material and labour for glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @3Kg/Sqm and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Demolition of Cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for 40mm thick PCC (1:2:4) type B1 (using 20mm grade stone aggregate) as in flooring finishing the surfaces even & smooth without using extra cement complete all as specified and directed.

Material and labour for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed.

Material and labour for factory made pre polished rubber moulded vibromatic Chequred cement concrete colour tiles of size 30 cm x 30 cm and 22 to 25mm thick, set jointed and pointed in neat cement slurry @3Kg/Sqm with grey cement and colour pigment to match over and including 15mm thick screed bedding layer in CM (1:6) complete all as specified and directed.

Material and labour for heavy duty endura ceramic coloured tiles 9-10 mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neat cement slurry @3Kg/Sqm and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour Sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and labour for 60 mm thick pre polished rubber moulded coloured (Red/Yellow) machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed.

Supply and fix in repair granite 15-18mm thick of Zed Black/Telephonic Black ( table rubbed and polished in steps, jambs pillars, window cill, cooking platform and like with approved adhesive incl pointing in coloured grout complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour for brick work with sub class 'B' brick old size straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth (without using extra cement) complete all as specified and directed.

Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and fair (without using extra cement) complete all as specified and directed.

Material and labour for preparation of newly plastered surface of walls including corners and applying two coats of distemper oil emulsion over applying of 1.5 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed.

Material and labour for preparation of new plastered surface of walls and applying two coats of cement base paint over a coat of suitable primer complete all as specified and as directed.

Material and labour for applying two coats of Synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

Material and labour for preparation of old plastered surface of walls including corners and applying two coats of OBD complete all as specified and directed.

Material and labour for preparation of old plastered surface of walls including corners and applying one coat of OBD complete all as specified and directed.

Material and labour for preparation of old plastered surface of ceiling and applying two coats of white wash on ceiling, off sets, pillar etc complete all as directed and specified.

Material and labour for preparation of old painted surfaces of wood and wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint on old painted steel surfaces/concrete surface of any description including preparation of steel surfaces complete all as specified and directed.

Supply and fix medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing including dismantling of old tubing complete all as specified and directed.

Supply and fix medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing including dismantling of old tubing complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and directed.

Supply and fix in repairs PTMT Ball valves 20 mm bore, high pressure with epoxy coated Aluminium rods & high density plastic ball screwed and fixed complete all as specified and directed.

All as per serial item No 84 here-in-before but 15 mm size complete all as specified and directed.

Material and labour for cleaning of water storage tank capacity exceeding 250 litres but not exceeding 500 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner, complete all as specified and directed.

Material and labour for cleaning of water storage tank capacity exceeding 500 litres but not exceeding 1000 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner, complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks capacity of tank 500 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

Attending complaints like leakge of taps, angle valve, stop coks or in pipes, fitting and removing of plumbing fittings such as Bib taps , pilllar taps, GI tubing , stop cocks, angle vales, float valves, water tanks, WCs flushing cistern, waste pipes, WHBs, EWCs and similar work for continuity of essential internal water supply/sanitary services by employing a experienced plumber and a helper to restore the exiting/services to the satisfaction of Engineer-in-Charge by using stores issued by the deppt all as directed. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) Material will provided by department through maintanace cell and neccessary salvage/unused material deposit back to complaint cell incharge/JE(Civ). (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iv) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-II. (v) Scan Copy of EPF,ESIC will be provided by the contractor at the time of bid submission other wise bid will be rejected in technical bid. (vi) If any complaint not attended by contractor with in 24 hours he will be liable for penalty/recovery of Rs.100 per complaint.Amount will be deducted from running payments/Final bill.

Attending complaints related to carpenter work including repair/easing of doors re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types of nails, screws etc which are required to make good the work, use of any other stores/fittings shall be paid seprately under Supply only items in building to continuity of essential carpentry service by employing experienced carpenter with a helper to restore the existing service to the satisfaction of Engineer-in-Charge by using store issued by the Dept all as directed. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) Material will provided by department through maintanace cell and neccessary salvage/unused material deposit back to complaint cell incharge/JE(Civ). (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iv) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-II. (v) Scan Copy of EPF,ESIC will be provided by the contractor at the time of bid submission other wise bid will be rejected in technical bid. (vi) If any complaint not attended by contractor with in 24 hours he will be liable for penalty/recovery of Rs.100 per complaint.Amount will be deducted from running payments/Final bill.

Attending complaints related to black smith work including resecuring/easing/minor repair to make functional of steel doors, steel windows, steel rolling shutter and gates etc by greasing,oiling & cleaning and changing of required fittings, fixtures & compnents etc by employing experienced Black smith with a helper to restore the existing service to the satisfaction of Engineer-in-Charge by using store issued by the Dept all as directed. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) Material will provided by department through maintanace cell and neccessary salvage/unused material deposit back to complaint cell incharge/JE(Civ). (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iv) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-II. (v) Scan Copy of EPF,ESIC will be provided by the contractor at the time of bid submission other wise bid will be rejected in technical bid. (vi) If any complaint not attended by contractor with in 24 hours he will be liable for penalty/recovery of Rs.100 per complaint.Amount will be deducted from running payments/Final bill.

Attending complaints related to Cleaning of blocked WC seat of pedestal/squatt pattern, blocked floor trap of bath room & kitchen etc upto Ist manhole and making the drain pipe of any size full fuctional by flushing with water including cleaning of 1st manhole and removing the waste material/sludge etc to a distance nexc 300m and burning the same in pits complete all as specified and directed by Engr-in -charge. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) Material will provided by department through maintanace cell and neccessary salvage/unused material deposit back to complaint cell incharge/JE(Civ). (iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor. (iv) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-II. (v) Scan Copy of EPF,ESIC will be provided by the contractor at the time of bid submission other wise bid will be rejected in technical bid. (vi) If any complaint not attended by contractor with in 24 hours he will be liable for penalty/recovery of Rs.100 per complaint.Amount will be deducted from running payments/Final bill.

Dewatering and cleaning of septic tanks, soakage well of any depth including inlet and outlet chamber and removing sludge, silt, residue both organic and in-organic nature including any other type of waste material after plugging of incoming sewage line and removing waste material/sludge etc to a distance n.exc 300m and burrying in a pit ,complete all as specified and directed.

Taking out & removing existing roof treatment of any description completely upto concrete surface including racking out joints, hacking for key,sweeping clean and scrubbing down with water etc to remove dust etc, complete all as specified and directed.

Material and labour for brushing neat cement slurry @ 3 Kg of cement per Sqm on cleaned roof/wall surfaces, complete all as specified and directed.

Material and labour for rendering 10 mm thick in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement in roof surface , complete all as specified and as directed.(Note- WPC shall be measured and paid separetely.)

Supply only integral water proofing compound as per manufacturers instructions ,complete all as specified and directed.

Material and labour for Water proofing roof treatment with Polymeric water proofing membrane of weight not less than 3Kg/sqm and minimum 3mm thick, five layers with center core as 90 micron high molesuvre, high density polythene film sand witched between two layers of polymeric (Static polythene based) between laminated on both sides with 20 micron HMDPF film over a coat of hot blown bitumen with 85/25 grade @ 1.20 Kg/Sqm after priming the surface with bituminous emulsion @ 0.30 Litre/Sqm on plastered surface. Water proofing membrane should be laid with over laps 150 mm at ends and 75 mm for sides and shall be bounded uniformity by LPG torch flame over the polymeric water proofing membranes apply semi hot blown bitumen 85/25 grade @ 1.20 Kg/ sqm dusted sand over the coat of the coat @0.5 Kg/Sqm, and applying aluminium reflective paint over it complete all as specified and as per manufacturers instructions. Note : - The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 2.5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. Contractor's quoted rate for this item shall deemed to be inclusive of this aspect.

Supply and fix in repair hollow PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed.

Material and labour in repair for false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grams, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width complete all as specified and directed.

Material and labour for providing and injecting chemical emulsion for post constructional anti termite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sqm of the vertical surface of the sub structure to a depth of 300 mm including excavating channel along the wall and rodding complete all as specified and directed.

Supply & fix in repair powder coated Aluminium standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-B(18mm) 3 track numbers for sliding windows, and glazed with glass 5mm thick, fixed with & including glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum including locking system and provision of space for AC etc complete all as specified and directed by Engr-in-charge. Shutter Top & bottom rail size:- 52.00 x 18.00 x 1.45 mm Shutter inner lock size:- 40.00 x 18.00 x 1.55 mm Chowkhat Top/bottom size:- 92.00 x 31.75 x 1.50 mm Chowkhat both sides size:- 92.00 x 31.75 x 1.50 mm Note: Iron grill with frame to be fixed with window shall be measured and paid separately under respective item of schdule.

Supply & fix for powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 83.00 x 44.45 x 1.54 mm including 5 mm thick glass/ACP Sheet complete with rubber packing/aluminum beading etc, complete all as specified and directed. Note: Iron grill with frame to be fixed with partition shall be measured and paid separately under respective item of schdule.

Supply and fixing Framed work such as grills, gratings, etc. or hand rails with ends of bars (angle, hollow section) shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Supply only spindle brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern.

Supply only white cement in 1 kg pack (Birla white or as approved)

Supply only Sand coarse, complete all as specified and directed

Supply only Sand Fine

Supply only Plain sheet glass 3 mm thick, complete all as specified and directed.

Supply only oil putty, complete all as specified and directed.

Supply only Nails wire mix of all size and type, complete all as specified and directed.

Supply only Cotton thread roll of weight not less than 100gm each for plumber work, complete all as specified and directed.

Supply only PVC waste pipe 32 mm, complete all as specified and directed.

Supply only Rain water pipes PVC (SWR) 110 mm bore with fittings, complete all as specified and directed.

Supply only Rain water pipes PVC (SWR) 90 mm bore with fittings, complete all as specified and directed.

Supply only Clamps for rain water pipes, complete all as specified and directed.

Supply only Screw steel 1 inch (Each Pkt contains 1000 Nos screws), complete all as specified and directed.

Supply only CP grating all sizes complete all as specified and directed.

Supply only cement 53 grade opc in 50 kg pack, complete all as specified and directed.

Supply only 18 mm thick PVC Board one side prelaminated, complete all as specified and directed.

Supply only PVC Connection 600mm, complete all as specified and directed.

Supply only aluminium Door seal 1000mm as directed by Engr-in-charge

Supply only M-seal packet (100gm each), complete all as specified and directed.

Supply only plywood 6mm thick, complete all as specified and directed.

Supply only ACP sheet 3mm thick, complete all as specified and directed.

Supply only magnetic catcher, complete all as specified and directed.

NOTE:- Amount of credit of Rs. 75905.00 for retrieved materials is mentioned in Schedule of Credit Page No 35 & 36 of tender documents in pdf form which will be deducted offline while acceptance of tender.

VERDHMAN ASSOCIATES (BID ID -3319730)

new hindustan construction company (BID ID -3320140)

V S ENTERPRISES (BID ID -3319898)

Alankar Traders (BID ID -3319549)

MOGHA CONSTRUCTION COMPANY (BID ID -3319760)

ANANYA CONSTRUCTION CO. (BID ID -3319900)