Construction of Chairman Chamber cum Meeting Hall in the Market Yard Kotabommali under AMC, Kotabommali in Srikakulam District.

Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming, whenever necessary dressing the bottom of foundations to level in all directions, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.

Filling with Dust (2.36mm & bellow) in trenches with an initial lead from approved source in layers not exceeding 150mm thick consolidation each deposited layers by watering and ramming including cost and conveyance of water to work site and all operational, incidental and labour charges etc., Complete.

P.C.C (1:4:8) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work.

Filling basement with Gravel brought from approved sources including watering,tamping, ramming , layers including cost and conveyance all materials and labour charges, seignorage charges etc., complete as per standard specification.

Vibrated Cement Concrete M20 Nominal mix equivalent to (1:2:4) proportion (cement: fine aggregate: Coarse aggregate) using 66.67% of 40mm HBG metal and 33.33% of 20mm HBG (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work.

V.R.C.C. M-20 Nominal mix(Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

For Pedestals up to GL

For 1st Floor Columns

For 2nd Floor Columns

For Lintel Beam

For Sun Shades (100+50) mm thick first floor

For Roof Beams Ground floor

For Roof Beams 1st floor

For Roof Beams 2nd floor

For Roof Slab 150mm thick 2nd floor

For Side walls 2nd floor

Providing High Yield Strength Deformed steel bars (Fe 500 grade ) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work.

Brick Masonry in superstructure with CM (1:6) prop: using second class bricks from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work.

For Ground floor

For Superstructure

Ceiling Plastering 12 mm thick in CM (1:3) sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete.

Plastering with CM(1:5) Prop: 12mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work.

For Superstructure Ground floor

For Superstructure 1st floor

Plastering with CM(1:5) Prop: 20mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work.

For Superstructure Ground floor

For Superstructure 1st floor

Providing and fixing factory-made uPVC any colour sliding glazed window upto 1.50 m in height dimensioncomprising of uPVC multi- chamberedframe with in-built roller trackand sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket/TPV, wool pile, zinc alloy (whitepowder coated) touch locks with hook,zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm).

Supply and Fixing of door with Teak frame of 100 x 150mm and 30mm thick solid bond wood block board type with teak ply on both faces with shutter such as 'Z' hold fast, 6 No's hinges 150mm long, 2 Nos Aldrop 300mm long, 1 No's Tower Bolt 150mm long and fixtures to door with required number of screws, bolt and nuts includigng labour charges for fixing the shutter to the frame etc., complete for finished item of work.

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 3 hinges will be required for fixing the door with the frame with fixing all fixures.

PCC (1:4:8) Prop by using 40mm HBG metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.

Supply & fixing 75mm thick metal studpartition using 12.5 mm thick Gypboard conforming to IS 2095-1982 screw fixedto eitherside to 48 mmstuds of 0.55mm thick with the 50mm floor and ceiling channel 0.55 mm and the jointsduly finished with joint compound, papertape and two coats Dry wall top coat asperspecification.

Supply of soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designsCM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work.

Providing skirting to internal walls to 15 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including, complete for finished item of work, but excluding the cost of conveyance of all materials.

Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Dadooing to internal walls with ceramic tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Cuddapah stone, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work.

Providing and applying synthetic plaster putty or plaster of pairs putty or lime punning of average 1 to 2mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface clean & wipe off loose dust, applying knifing paste filler by putty knife muslin pad, air dry for 2-3 hrs sand with 180 and 320 Nos. emery paper for the surface preparation including cost and conveyance of all materials to work site and all operatinal incidental, albour charges etc., complete for finished item of work for Internal walls for Internal colouring providing putty to internal walls.

Painting to New walls Work with two coats of Plastic Emulsion paint (acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter.) of superior quality of approved brand and shade over a base coat of Cement Primer Gr I( 3 coats) in all to give an even shade after thoroughly brushing the surface to remove all loose materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work BLD CSTN 10.2 & 2011-12 SSR Amendament Datas S. No.15.

Roofing With 0.5mm thick galvanized /pre painted G.I profiled sheets with crimp of 200mm length fixed to the purlins With 14 size self drilling with neoprene washer Side laps are stiched with self tapping drilling screws .End laps are to be sealed with 25x3 mm Butyl tape .the sheets are provided with anti capillary groove.including cost and labour charges etc., complete as per standard specification for finished item of work.

Supply and fixing of Purlins using any size Medium class M.S. Square Pipe etc., including cost and conveyance of all Materils and labour charges for fabrication charges etc., complete.

Supply and fixing in position M.S Ornamental Grill Gates using M.S flats, square rods, angles etc., of approved design weighing, including necessary cuttings, bending, fabrication, welding grinding, and finishing smooth including cost of making holes in RCC or Masonry works and making good the same where ever necessary, including cost and conveyance of all materials, labour charges and all other incidental and operational charges etc., complete as directed by the departmental officers.

Painting two coats with synthetic enamel paint first grade to new iron work including one coat of red oxide paint for New Iron work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. for New Iron work.

Supply and Fixing of 25mm dia 1.80mm thick PVC pipe (ISI MARK) As per IS:9537 part III surface in wall with all required accessories including masonary work and labour charges etc.,.of makes Sudhakar / Maco plast / Modi. Complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant FRLS P.V.C. insulated 1100v grade as per IS:694/1990 sepacification of flexible copper cable (ISI MARK)of makes Polycab/ Havells/ Suncab / Goldmedal/ million/ Fortune art / Paragon / HPL / L & T / Power flex / RPG / Anchor / Bonton in existing pipe with 6A switch and Ceiling rose of makes Goldmedal Olive / Million Zoom / Anchor Penta cherry , and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete. For Fan Points.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant FRLS P.V.C. insulated 1100v grade as per IS:694/1990 sepacification of flexible copper cable (ISI MARK)of makes Polycab/ Havells/ Suncab / Goldmedal/ million/ Fortune art / Paragon / HPL / L & T / Power flex / RPG / Anchor / Bonton in existing pipe with 6A switch and Ceiling rose of makes Goldmedal Olive / Million Zoom / Anchor Penta cherry , and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete. For Light Points.

Supply and fixing of 20W, T8,1200mm length LED retrofit tube light, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 Makes: VIN/Surya / Pharox /Greenlites/ Fortune Art / Capart / GM / Goldmedal / Syska / Cosmo / Sieger/Ib LED/P romtec/Eveready/Stanjo/Enrich/Opple b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / VERLIGHT/ San'an.

Supply and fixing of batten holder / slanting holder of makes Anchor / Gold medal olive / Million Zoom in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W bulb (for new installation) of makes Wipro / GE / Philips / Crompton / Bajaj.

Supply and fixing of 1200 mm (48") Sweep ISI mark ceiling fan as per IS:374 - 1979 with double ball bearing without regulator of makes Crompton / Bajaj / Usha 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories.

Supply and fixing of moduar stepped type electronic regulator with cover frame on existing board of make Legrand Arteor / MK blenge / Scheider Zen Celo.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C.IS: 694/1990 insulated flexible copper cable in existing pipe for mains inlcuding all labour charges. Of makesPolycab / Havells / Sun cab / Gold medal / Million / Fortune Art / Paragon / HP: / L&T / Power flex / RPG / Anchor / Bonton etc., complete.

Supply and fixing of 6A 3 pin wall plug socket of makes Goldmedal Olive / Million Zoom / Anchor Penta cherry with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply, Transportation and installation of 1.5 TR, 5 star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32/ R- 410A, COP not less than 4.5 Makes: As per list of recommended brands as category I.s, with 5 Mtr of required size of copper piping duly insulated and 3 core copper flexible chord of required length etc., complete.

Cost, Supply & Fixing of 110 mm dia 6 Kg/sq.cm - Prince /Sudhakar /Kisan/ Supreme or any ISI Brand including Cost & Conveyance of all materials and all labour charges etc., complete for finished item of work.

Cost, Supply & Fixing of 75 mm dia 6 Kg/sq.cm - Prince /Sudhakar /Kisan/ Supreme or any ISI Brand including Cost & Conveyance of all materials and all labour charges etc., complete for finished item of work.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) etc., complete for finished item of work as per standard specifications and as directed by the Engineer - in - charge at site of work. For 28.60mm OD pipe water connections.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) etc., complete for finished item of work as per standard specifications and as directed by the Engineer - in - charge at site of work. For 22.20mmm OD pipe water connections.

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects:White Colour.

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995.

Supply and fixing of 12.7 mm NP stop cock Indian makeheavy duty inclduing cost and labour charges etc., complet finished item of work.

Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 660 x 460 mm - Single C.P. Pillar cock BMW-D.21.