Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.4 Cr
EMD Value
₹2.8 L
Closing Date
15 Oct 2026, 3:00 pm3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EXECUTIVE ENGINEER
THE EXECUTIVE ENGINEER(R), DIV XXV PWD, FATORDA
Protection to landslide parallel to rural road with road Id 70035 for a length of 60.00m at Shivnagar Xeldem in Curchorem Constituency of Quepem Taluka.
2026_PWD_32247_1
PWD/WDXXV/ASW/F-2/26-27/26 Line 4 dt 08/10/2026
Open Tender
Civil Works - Roads
Percentage
60 days
THE EXECUTIVE ENGINEER(R), DIV XXV PWD, FATORDA
Please refer Tender documents.
3 documents required · 3 mandatory
₹10,000
₹2.8 L
8 Oct 2026
8 Oct 2026
16 Oct 2026
8 Oct 2026
15 Oct 2026
8 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply and Installation of ISO Certified Self Drilling Anchors (SDA) - 38 mm diameter, made of 40CR material with yield load more than or equal to 400 kN shall be used, it shall have a minimum drill hole diameter of 76mm. The base plate shall be of size (min.) 200 X 200 X 10mm, which should be secured with hexagonal nut, washer plate, base plate, coupler for connecting bars, drill bit etc. The exposed part of SDA, nuts and bearing plate shall be protected with suitable corrosion protection coating and complete as per detailed technical specifications and as directed by Engineer - In - Charge. The supplier to be an Indigenous manufacturer having a NABL accredited testing facility which will be tested before the dispatch of material by the engineer incharge and the material to be installed by or should be installed under the supervision of specialized system provider. | 432 | m3 | 581.76 | ₹2,51,320.32 |
| 2 | Cement pressure grouting through Hollow Soil Solid Rock Anchor of outer dia 76/51/38/32/25 in Rock /Overburden including all cost of material and equipments required to complete the grouting work at desired pressure | 1,116 | m2 | 4,074.42 | ₹45,47,052.72 |
| 3 | Providing and laying CE /ISO/BIS Marked Needle Punched and Mechanically Bonded TFI Non-Woven Geotextile indigenously manufactured from high quality polypropylene staple fibres (continous filament will not be accepted) for separation, drainge and filtration application with necessary overlaps as per the specifications with prior approval or directed by Eng ineer-in-Charge | 837 | m3 | 925 | ₹7,74,225 |
| 4 | Providing and fixing weepholes with rigid PVC make laid in position with a required slope and level while layingpipes of approved the concrete of retaining wallwing wall and earth retainig structure complete as directed by the Engineer in charge;B) 75 mm dia | 24 | m2 | 239 | ₹5,736 |
| 5 | Plain/Reinforce d cement concrete, in well foundation complete as per drawing and technical specification (iv) PCC M25 Grade ,Case II With Batching Plant, Transit Mixer and Concrete Pump | 95 | RM | 185 | ₹17,575 |
| 6 | Providing & laying cement concrete 1: 1.5: 3 (1 cement: 1.5 coarse sand: 3 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering shuttering and finishing in:;All works upto plinth level | 722 | m3 | 11,054.45 | ₹79,81,312.9 |
| 7 | Loading of excavated earth by front end loader 1 cum bucket capacity and transporting the soil 57.6 | 7 | cu. m | 7,292 | ₹51,044 |
| 8 | Supplying of labour per day basis as and when required for carry out monsoon related works like clearing of bushes, desilting of drains culvert etc. as directed by Eng ineer-in-charge s etc. complete | 216 | m3 | 57.6 | ₹12,441.6 |
| 9 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level uniform and free from streaks and holes as per MORTH Specification 803 | 360 | each | 575 | ₹2,07,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.01 MB
Tendernotice_2.pdf
PDF • 0.71 MB
Tendernotice_3.pdf
PDF • 0.66 MB
BOQ_32628.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .