C/o Town Hall in ward no. 4

Amount

Brick work using common burnt clay building bricks in cm 1:6 ( 1 cement : 6 sand) using second class bricks upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.

P/F Holding down Bolts 12mm Dia in foundation for fixing the C.I. pipe coloumn i/c allignment and leveling including entire carriage of materials in all leads and lifts complete

Steel Work Welded in built up sections trusses and framed work i/c cutting hoisting fixing in position and applying a priming coat of red lead paint in gratings framed gard bars,ladders railings brackets etc and similar work Steel trusses for shed including fixing at site with cement concrete base 1:3:6 after prepration of base upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.

Providing and fixing 0.50mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges.

15mm (Fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers, grooves and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:5 (One cement : six sand) upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.

Providing and laying 10mm thick anti skid water proof stain and impect resistant heavy duty vitrified Nitco/ Kazaria or equivalent tiles 600x600 x 10 mm manufacture of approved shade and colour in flooring, treads of steps, and landing laid over 12mm thick cement mortar 1:3 (1 cement :3 sand )laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.

16103000000 Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropping dust loose materials and other foreign matter sand papered smooth to give final finish to the surface complete. upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats 0 to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.

14520000 Grading roof for water treatment with Cement concrete 1:2:4 (1 cement :2 sand 4 graded stone aggregate 20 mm nominal size ) cum 714.00 3454.10

Distempering with oil bound washable distemper of of approved brand and manufacture and of required shade on decorated wall surface to give an even shade after thoroughly brushing the surface clean of all grease, dirt and sand paper smooth loose pieces of scales and also including prepairing the surface even and smooth

1217600000 Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. 1217601000 For doors windows and ventilatiors and glazed partitions frames.including all lead ad lift and other incidental charges complete

1217600000 Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge.1217602000 For shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) ncluding all lead ad lift and other incidental charges complete

Kuldeep Singh

Govt. Contractor