SPECIAL REPAIR TO BLDG NO P 171 AND P 174 (07 X QTRS) INCLUDING SERVANT QTRS AT TONS VIEW AT IMA DEHRADUN

Amount

Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down with water etc and including removal out side IMA premises complete all as specified and directed.

M&L for Preparing the surface by cleaning with Brick Level surface grinder / wire brush and a high pressure water jet and Ensure that it is free of dust, oil, fungi, grease, grime and loose particles. The surface shall be rendered clean prior to application of Surface. Wire brushing shall be done so as to get rid of any kind of loose material and debris. The surface shall be free from loose plaster(work to be carried upto a height of 7.5m). Note : The work shall be executed from authorized applicator as approved by GE.

M&L for applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, Asian Paints SmartCare Suprema Damp Block 2K or approved equivalent, having 80% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications. Minimum consumption shall be 1.8 kg/sqm (work to be carried upto a height of 7.5m). Make : Asian Paints/Nerolac/Berger. Note : The work shall be executed from authorized applicator as approved by GE.

M&L for Asian Paints Smartcare 15mm Ready Mix Plaster or equivalent will apply after wall coated with Damblock 2k. of approved manufacturer, of required shade and colour complete, as per manufacturer's specification (work to be carried upto a height of 7.5m). Note : The work shall be executed from authorized applicator as approved by GE. Make : Asian Paints/Nerolac/Berger.

M&L for applying fibre reinforced, UV resistant elastomeric liquid applied waterproofing & Heat reflective coating with acrylic fibres, SmartCare Damp Proof or approved equivalent. The coating shall resist 10 bars of water pressure as per DIN 1048 standards, with elongation of 350% as per ASTM D412 & crack bridging of upto 2.5mm conforming to ASNZ standard, The coating shall reduce the surface temperature of 10 degrees, by applying 1 Coat of self priming with water dilution and 2 coats of Damp proof on the wall vertically and horizontally over a coat of 3mm thick acrylic water proof wall care putty. Make : Asian Paints/Nerolac/Berger Note : The work shall be executed from authorized applicator only as approved by GE.

M&L for Asian Paints Exterior Emulsion or equivalent, anti algae, weather proof Apex ultima 100% Acrylic exterior paint from approved make & shade to the exterior surface in two coats. Including preparation of the surface like holes, dents and cracks to be filled only by using mixture of white cement and fine sand (in the ratio 1:3), applying a exterior wall primer (X2) one coat, curing, cleaning etc. complete. The dry/wet cleaning of floors/pipes/glass etc. after painting is to be carried out, protection of surrounding surfaces before painting is included in the item (work to be carried upto a height of 7.5m). Make : Asian Paints/Nerolac/Berger Note : 1. The work shall be executed from authorized applicator only as approved by GE. 2. After completion of weather coat, contractor have to carry out following work whose rates to be included while quoting the rates. No extra payment will be made on this account and damage if any to be borne by the contractor. 3. Cleaning of floor with floor cleaner and stain should be removed from wall/door/jali/glass.

M&L for smart care ultron hybrid Polyurea polyurethene waterproofing liquid membrane on concrete surfaces (work to be carried upto a height of 7.5m). Make : Asian Paints/Nerolac/Berger Note : 1. The work shall be executed from authorized applicator as approved by GE. 2. MoU for Sl. No. 02 to 07 shall be submitted before execution of works.

Complete removal of existing treatment from wall / ceilling by using mechanical sander/ scrapper complete all as specified and directed.

M&L for Preparation of wall / ceiling and applying two coats of oil bound emulsion distemper over a coat of primer complete over a coat of 1.50 to 2.00mm thick acrylic water proof wall care putty as per manufacturers instructions all as specified and directed. Make : Asian Paints/Nerolac/Berger. Note : 1. The work shall be executed from authorized applicator as approved by GE. 2. After completion of distempering, contractor have to carry out following work whose rates to be included while quoting the rates. No extra payment will be made on this account and damage if any to be borne by the contractor :- (i) cleaning of floor with floor cleaner and stain should be removed from wall/door/jali/glass. (ii) cleaning of fan after removing and refixing the same. (iii) cleaning of curtain rod. (iv) shifting of furniture.3.2. MoU for Sl. No. 02 to 07 shall be submitted before execution of works.

M&L for Preparation of surfaces of wall / ceiling (new/old) and applying two coats of weather coat exterior paint over a coat of primer complete all as specified and directed. Note : 1. The work shall be executed from authorized applicator as approved by GE. 2. MoU for Sl. No. 02 to 07 shall be submitted before execution of works. Make:- Asian Paint, Berger Paint, Nerolac Paint.

M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of existing brick work and including removal out side IMA premises complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in roof kerb, mud stop, plinth course, copings etc including necessary form work complete all as specified and directed.

Demolition of cement concrete (reinforced) in any position and any thickness and including removal out side IMA premises complete all as specified and directed.

Demolition of cement concrete/stone in ground floors and pavings n.exc 15cm thickness (below or above ground level) including removal out side IMA premises complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork complete all as specified and directed.

M & L for 100 mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in floors/sub base etc complete all as specified and directed.

M&L for Non skid any pattern fully vitrified coloured tiles 9 to 10mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured tile grout to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing out side IMA premises complete all as directed. Note :- Colour as approved by GE.

M&L for Non skid any pattern fully vitrified coloured tiles 9 to 10mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in vertical surface such as skirting dado and riser to step floor, set and jointed in neat cement slurry and pointed in white or coloured tile grout to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing out side IMA premises complete all as directed. Note :- Colour as approved by GE.

M&L for full body Vitrified ceramic coloured tiles 8 to 9mm thick (Square or rectangular) polished, area of each tile n exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured tile grout to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 including dismantling floor hearth or wall tiling including cement mortar bedding and removal out side IMA premises complete all as specified and directed. Note :- Colour as approved by GE.

M&L for full body Vitrified ceramic coloured tiles 8 to 9mm thick (Square or rectangular) polished, area of each tile n exceeding 0.36 Sqm, as in vertical surface such as skirting dado and riser to step floor etc, set and jointed in neat cement slurry and pointed in coloured tile grout to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 including dismantling floor hearth or wall tiling including cement mortar bedding and removing out side IMA premises complete all as specified and directed. Note :- Colour as approved by GE.

M&L for Glazed ceramic coloured tiles of size 450x300x7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in same colour grout to match including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 for receiving wall tiles and dismantling of existing tile complete all as directed. Note :- Colour as approved by GE.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting chasing in brick work and half rounding of exposed edges including taking down existing shelf and cutting chasing and repair for inserting shelfs complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames exc 1.50 sqm and n.exc 4 sqm each with shutters (with out taking off shutters from the frames complete all as specified and directed.

S&F in repair Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and including MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid both side prelaminated decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.

M&L 35mm thick factory made solid WPC (Wood plastic composite) moulded gauged door shutter (single door piece to be used) with wire mesh in any number of division with brown wood grain texture, including stainless steel wire mesh of 0.40mm nominal dia and average width of aperture 1.40 mm shall be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufacturer instruction complete all as specified and complete all as specified and complete all as specified and directed.

Taking down any type of door fittings complete all as directed.

S & F 100 mm size stainless steel butt hinges medium weight cold rolled complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 150mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

S&F 100mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed

S&F 300mm mild steel door spring including roller and roller plate fixed to chowkhat complete all as specified and directed.

M&L for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one Nos wire gauged shutter sliding type, with aluminum sections as per Series-B (18mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 6mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type 2 Nos aluminium handle of size 75mm and locking system including aluminium grill of 5mm thick, average width of aperture 50mm and SS wire cloth 0.40mm dia of wire and 1.40 aperture with provision of space for AC etc complete all as specified and directed. Shutter Top & bottom size : 52.00 X 18mm X 1.45mm Section No 20737 Shutter inner lock size : 40.00 X 18mm X 1.55mm Section No 20736 Chowkhat bottom/ Top size : 92.00 X 31.75mm X 1.50mm Section No 20832 Chowkhat both sides size: 92.00X31.75mm X 1.50mm Section No 20831

S&F aluminium powder coated door fixed on aluminium frame of section 47.62mm x 44.45x1.6 mm thick, shutter glazed with and including tinted glass 5mm thick fixed with rubber gasket and aluminium strips as per standard method also rubber gasket at frame so as to make air tight with cast type handle aluminium anodised of 150mm size 2 Nos (One on each side of shutter) with shutter bottom rail 150mm x 44.45mm x1.6mm thick section, middle and top rail 83.5mm x 44.45mm x 1.6 mm thick section, side style 83.5mm x 44.45mm x 1.6 mm thick section all as per IS 737- 1986 fixed with aluminium (extruded section) hydraulic door closer regulated designation No-3 universal type and make with aluminium tower bolt arrangement of standard make with locking arrangement with 6 levers mortise lock(brass body) of size 100mm including butt hinges, door stopper etc complete all as specified and directed.

S&F aluminium powder coated frame for fixed partition of section 47.62mm x 44.45x1.6 mm thick glazed with & including tinted glass 5mm thick fixed with rubber gasket and aluminium strips as per standard method also rubber gasket at frame so as to make air tight all as per IS 737-1986 complete all as specified and directed.

S&F powder coated aluminium window with double shutters (both gauzed and glazed) with and including aluminium grills 5mm thick and average width of aperture 50mm and SS wire cloth 0.40mm dia of wire and 1.40mm aperture, fixed on aluminium frame 150mm x 37.5mm x 1.6mm thick, shutter with bottom rail, middle rail, top rail and stiles of size 44.45mm x 47.62mm x 1.6mm thick as per IS 737-1986 and glazed with tinted glass 5mm thick as per standard practices with handle, hinge & tower bolt arrangements complete all as specified and as directed.

M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work (FE 290 Gde E -169 ) .

S&F Steel ventilator factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 088 Sheet 1/17 to 17/17.

S & F 4mm thick frosted glass of ordinary quality and glazing with oil putty complete all as specified and directed.

S&F Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' cast iron trap, concrete bedding and making good existing floor fixed in repair complete all as specified and directed.

S&F in repair single piece Vitreous china any shade cascade floor mounted single piece water closet P/S trap with dual flush and UF soft close slim seat cover, hinges fittings, conversion bend, fixing accesories complete all as specified and directed. Make : Jaquar Cat part No OPS-WHT15753NS250UFSMZ/ Cera cat part No S1013105/Kajaria cat part No KB-3007

S&F in repair oval shaped vitreous china WHB table top chauvin snow white, fancy type of overall size 450 x 410mm, cera Cat part No S2020166 or of equivalent make in Jaquar/Kohler including 32mm CP waste coupling, PVC waste pipe etc complete, including pre polished 18 to 20mm thick granite slab counter of colour as approved and of size not exc 0.40 sqm including cutting nitches rounding edges etc complete, horizontally supported by 02 Nos of angle iron 50x50x5 embedded in walls in cement mortar 1:3 all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous china full set pedestal type wash basin, white, flat back, size 585x450x220mm including bracket, CP brass 32m dia coupling, waste pipe complete all as directed. Make : Jaquar Cat part No Jaquar FLS-WHT-5801 & 5301/Cera cat part No S2040112 & S2090107 or equivalent Make : Kajaria/Kohler

S&F Vitreous china wash basin, white, flat back, size 550x400mm including bracket, coupling, waste pipe fixed in repair complete all as directed. Make:- Cera/ Jaquar/ Parryware.

S&F PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed. Make:- Cera, Parryware, Jaquar

S&F Stainless steel plate rack of size 30 inch X 30 inch X 10 inch fixed in repair complete all as directed. Make:- Prayag, Nirali, Blue star

S&F in repairs 15mm bore long body (long nose) bib tap chromium plated fancy type with wall flange and aerator fixed in repair complete all as specified and directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Kohler.

S&F Chromium plated pillar cock with areator 15mm dia screwed for iron pipe or brass ferrule, fixed in repair complete all as specified and directed. Make:- Jaquar Opal Prime Series/ Cera Ruby series/Kohler.

S&F 15mm dia chromium plated concealed stop cock, heavy body with cap fixed in repair complete all as specified and directed. Make:- Jaquar Opal Prime Series/ Cera Ruby series/Kohler.

S&F in repair PVC connection, reinforced 600mm long 15mm in size with brass check nut and PVC washers at both ends complete .

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long.

S&F in repair Corner glass shelf assembly with bracket complete all as specified and as directed.

S&F in repair toilet paper holder with flap guard fixed to walls with chromium plated brass screws. Make : Cera cat part No F5013110CH or equivalent in Jaquar/Kohler.

S&F in repair soap dish holder fixed to walls with chromium plated brass screws. Make : Cera cat part No F5013106CH or equivalent in Jaquar/Kohler

S&F in repair soap dispenser fixed to walls with chromium plated brass screws. Make : Cera cat part No F5013111CH or equivalent in Jaquar/Kohler

S&F in repairs CP brass hot & cold single lever basin mixer with 305mm (12") extended body and 600mm braided connection pipe cast copper alloy with centre hole for WHB complete all as directed by Engineer-in-charge. Make : Jaquar Opal Prime Series/ Cera Ruby series cat part No F-1005452/Kohler

S&F in repairs CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with bend pipe for overhead shower provn with connecting legs & flangs in complete all as specified. Make : Jaquar Opal Prime Series/ Cera Ruby series cat part No F-1005402/Kohler

S&F in repairs CP brass hot & cold 15mm dia sink mixer swinging spout (wall mounted model) with connecting legs & wall flanges complete all as specified. Make : Jaquar Opal Prime Series/ Cera Ruby series cat part No F1005501/Kohler

S&F in repairs CP fancy type Angle valve 15mm dia cast copper alloy with wall flange. Make : Jaquar Opal Prime Series/ Cera Ruby series/Kohler

S&F in repairs CP fancy type twin Angle valve 15mm dia cast copper alloy with wall flange. Make : Cera cat part No F1016211 or equivalent in Kajaria/Kohler

S&F in repair CP brass overhead shower Rose of 100mm dia with long shower Arm pipes and wall flange. Make : Cera cat part No F7010213AB or equivalent in Jaquar/Kohler

S&F in repair CP Health faucet telephonic type with CP with 1.5m long flexible pipe. Make : Jaguar/CERA/Kohler

S&F 1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

S&F Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as specified and directed. Male:- Cera, Prayag, Polytuff.

M&L Drapery rod in any length, high strength stain less steel pipe having outer dia 25-28mm a pair of brackets & a pair of stainless steel finials, fixed in repair complete all as specified and directed.

S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based corrugated steel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall etc fixed in repairs complete all as directed.

S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed one end to wall with screw/fasteners with washers and wall plug at the distance of 300 mm and another end to corrugated sheet fixed with self tapping screws and gaps between wall to sheet shall be sealed with silicone etc fixed in repairs complete all as directed by Engr-in-charge.

S&F Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.(Fe-410-W(Gde E- 250) quqlity B)

M&L for Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for PCC 1:2:4 type B-2 (using 20mm graded crushed stone aggregate) as in surface channels and drains including Desludging/ cleaning of open drain of any depth by mechanically means and removing the sludge outside the IMA premises complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends, etc all as specified.

M&L for 15mm thick ready mix external cement plaster on brick, concrete surfaces and Ceiling including providing & mixing water proofing compound as per manufacturers specification, surface finished even & fair, finishing curing scaffolding including taking down of existing cement plaster etc and removing out side IMA premises complete all as specified and directed. (Work to be carried upto a height of 7.5m). Make : ACC (Suraksha)/Ultratech(Readyplast)/Birla (Aerocom).

S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.

S&F PVC branch pieces single ordinary or inverted or with parallel branches 110mm dia fitted with oval access doors fixed in repair complete all as specified and directed.

S&F PVC branch pieces single ordinary or inverted or with parallel branches 75 mm dia fitted with oval access doors fixed in repair complete all as specified and directed.

S&F PVC (SWR) bends of 75 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed.

S&F PVC (SWR) bends of 110 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed.

S&F PVC bends fitted with oval access doors 75 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed.

S&F PVC bends fitted with oval access doors 110 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed.

S&F PVC (SWR) floor trap 100mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.

S&F PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.

Cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintels, etc, and cutting chases for concealed water tubing or concilled conduit wiring, etc and making good exceed 20 cm girth in brick walls complete all specified and directed

S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

S&F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

S&F Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 405mm x 460mm x 203 mm bowl size 405 mm x354mm x 203mm fixed in repair complete all as specified and directed. Make :- Prayag /Blue star/Nirali.

M&L in repair for 18/19mm thick one side prelaminated colour WPC board for cup board shutter and frame & fixed at site complete all as specified and directed. Note :- Board edges properly finished with strip on band edges.

M&L in repair for 18/19mm thick white WPC board for cup board shutter and frame & fixed at site complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30 mm complete all as specified.

S&F Auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed in repair complete all as specified and directed. Make : Godrej, Hettich, Hafele.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs fixed in repair complete all as specified and directed. Make : Godrej, Hettich, Hafele.

S&F Stainless steel handles 100 mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed. Make : Godrej, Hettich, Hafele.

S&F Chromium plated stainless steel wire basket (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. Make : Godrej, Hettich, Hafele, Butterfly.

S&F Chromium plated stainless steel wire basket (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. Make : Godrej, Hettich, Hafele, Butterfly

S&F Chromium plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. Make : Godrej, Hettich, Hafele, Butterfly

S&F Chromium plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. Make : Godrej, Hettich, Hafele, Butterfly

S&F Chromium plated stainless steel wire basket (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304 with necessary sliding frame structure, fixing clips etc fixed in repair complete all as specified and directed. Make : Godrej, Hettich, Hafele, Butterfly

S&F Chromium plated stainless steel wire basket (Bottle pull out) pull out type two self, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc fixed in repair complete all as specified and directed. Make : Godrej, Hettich, Hafele, Butterfly

S&F in repair Grating square fitting of size 150mm made in two parts for smell and mosquito proofing with hole for waste pipe complete all as specified and directed. Make:- Cera, Prayag, Shakti

S&F in repair brass chromium plated towel rail, 600mm long. Make : Cera cat part No F5013103CH or equivalent in Jaquar/Kohler

S&F in repair brass chromium plated towel ring fixed with screw in wall complete all as specified and directed.Make : Cera cat part No F5013115CH or equivalent in Jaquar/Kohler

S&F in repair brass chromium plated towel rack with hooks, 60cm long between flanges complete all as specified and directed. Make : Cera Cat Part No F5015131CH or equivalent in Jaquar/Kohler.

S&F of tooth brush/paste tumbler holder fixed to walls with chromium plated brass screws. Make : Cera cat part No F5013107CH or equivalent in Jaquar/Kohler

M & L for Roof treatment by applying a coat of cold applied oil based bituminous primer over cleaned surface @ 0.50Kg/Sqm, and laid 3mm thick APP modified five layer polymeric membrane, minimum weight not less then 3.60 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) with torch application method as per manufacturer's instructions with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces with grooves & make good in cement mortar 1:3, finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab, cleaning off all foreign materials by wire brushing, cleaning roof surfaces with water and removal of spoil out side the IMA premises, complete all as specified and directed. Make : STP / Sika/ Pidilite as approved by GE. Note :- Work shall be executed by authorised applicator of manufacturer and upto roof height of triple storied building. 10 years manufacturer guarantee shall be submitted by the contractor.

M&L for 20mm thick screed bed in cement mortar 1:4 on roof surface finished even and smooth including taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water, removing/uprooting of vegetational growth etc.complete all as specified and directed.

Repairing to existing door/ window chajjas upto 3.0m span and width 1.0m by demolition/ scrapping of damaged portion and preparing the surfaces by providing 50mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including finishing the surface by rendering 10 mm thick plaster in cement mortar 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering sliglitely rounded or chamfered angles and throating over and and complete making good existing disturbed surface all as specified and directed (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering).

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear mtr including drilling and plugging holes etc. in apron.

M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors complete all as directed

M&L for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone agg) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed

S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605x 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mmx25mmx 1.4mm, cross tee 38 mmX25 mmX1.4mm, angle along walls 38 mmX 25mmX2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed.

S&F 25mm thick heavy duty pre-polished & rubber moulded Chequered cement concrete tile of any pattern decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. Make:- Tulip Infrastructure, Jain Tiles Haldwani, NTC Panchkula.

M&L for obliterating old writing of any description, n exc 0.1 sqm with black paint in the form of diamond shape of size not exc 30x30cm and writing letters or figures (Block, Roman Italic or Indian), stops, commas, short lines, dashes, hyphens, brackets etc minimum of 10 cm height (total letters not exc 06 Nos) colour as decided by Engr -in charge complete all as specified and directed (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding).

S&F in repair Factory made heavy duty precast RCC Manhole cover confirming to IS 12592 (Part -1 & II) of size 1200mm x 450 mm x 75mm of M-30 Grade of concrete and suitably reinforced with strong vibrating compaction by vibratory table including providing MS hook duly black painted, complete all as specified and directed. Make:- Tulip Infrastructure, Jain Tiles Haldwani, NTC Panchkula.

S&F in repair Factory made Precast plain / perforated RCC Drain/ manhole cover of size 900x 450 x 50 mm of M-30 grade of concrete reinforced with 8 mm dia TMT bar of Fe- 500 grade at 150 mm c/c spacing both way with strong vibrating compaction by vibratory table including providing MS hook duly black painted complete all as specified and directed. Make:- Tulip Infrastructure, Jain Tiles Haldwani, NTC Panchkula.

S&F in repair Factory made Precast plain / perforated RCC Drain/ manhole cover of size 450x 450 x 50 mm of M-30 grade of concrete reinforced with 8 mm dia TMT bar of Fe- 500 grade at 150 mm c/c spacing both way with strong vibrating compaction by vibratory table including providing MS hook duly black painted complete all as specified and directed. Make:- Tulip Infrastructure, Jain Tiles Haldwani, NTC Panchkula.

S&F implemental safety door viewer/magic eye along with its accessories fixed in door complete all as directed.

M&L for PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in foundation of man hole incl demolition of existing cement concrete of any description complete all as specified and directed.

M&L for Cleaning the manhole up to 1.50m deep by rodding manually and removing the sludge from manhole and completely cleaning by flushing with water etc complete , sludge shall be buried into ground and throwing the enough quanity of lime to stop the foul smell complete all as specified and directed.

M&L for Cleaning the sewage line over 150mm dia and upto 250mm dia by rodding manually and removing the sludge and completely cleaning by flushing with water etc complete , sludge shall be buried into ground andcovered with sufficient lime complete all as specified and directed.

M&L machine cut Kota stone 18 to 20 mm thick over cement screed base laid and jointed with grey cement slurry and pointed in grout to match the shade of the slab including rubbing and mirror polishing to be matched with existing kota floor complete all as directed.

M&L for Taking down of existing sunken slab treatment including demolition of sub base concrete of any description from the sunken portion and cleaning the surfaces by washing down with water and rubbish off the premises and treated the sunken portion as per following specifications:- (a) Cleaning and filling crevices, cracks and undulations by applying cement sand mortar mixed with SBR latex polymers of make- Dr fixit Pidicrete URP or equivalent of Sika or STP Ltd as per recommendations of manufacturer and then brushing the entire floor and walls of sunken area with neat cement slurry @ 3.00 kg/ sqm and laying 30mm average thickness of plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) over sunken slab portion in required slope and finishing the top surfaces even and smooth using extra cement . (b) Provision and fixing of 50mm dia PVC pipe as spout, projection 150mm beyond outer face of the wall of sunken floor to drain out water. (c) Apply two coats of acrylic cementitious water proofing coating resin base 2K, manufactured by M/s Pidilite industries Ltd, STP Ltd, Sika make as approved by GE as per manufacturer recommendations on floor and all around wall surfaces dulyv sanding with dry coarse clean sand in second wet coat of 2K to make rough surface to receive plastering all as directed. (d) Laying a protective coat of 15 mm thick rendering in cement mortar 1:3 \mixed with liquid water proofing compound @ 200ml per 50 kg cement or as per manufacturers instruction, of approved make on all surfaces of sunken area including vertical wall upto 450mm height, after preparations as mentioned above. Method of application for acrylic cementitious water proofing coating shall be followed as per manufacturers instructions.

S&F Welded steel wire fabric n exc 4 kg /sqm to wood or steel members complete all as directed by Engr-in-charge.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc.

Taking down existing exhaust fan of any capacity and make serviceable by replacing the unsv parts including preparation of old painted surface body and blades of exhust fan of any capacity ,cleaning foreign material ,filling cavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paint and kept in safe custody for reuse at site after compltion of wiring work.

Taking down water Heater of any capacity and make serviceable by replacing unsv part including descaling the inner container with cleaning solution including preparation of old painted surface body of geyser of any capacity ,cleaning foreign material ,filling cavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paint and kept in safe custody for reuse at site after compltion of wiring work.

Taking down the existing Energy meters carefully and proper noted down the qtr No Meter No and reading with date and kept in safe custody for re-fixing at site after compltion of bldg work complete all specified and directed.

Taking down old U/S main switches, Sheatmetal enclosures DB including MCCBs, MCBs etc including making good to the disturbed surface of wall all as directed.

Taking down old unsv T/L, Lamp,Security light of any size and capacity

Taking down existing ceiling fan of any capacity and make serviceable by replacing unsv parts and preparation of old painted surface body and blades of ceiling fan of any capacity ,cleaning foreign material ,filling cavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paint and kept in safe custody for reuse at site after compltion of wiring work.

Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed.

Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in Non metalic PVC conduit not less than 25mm dia concealed in wall with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6 mm thick, 60 mm deep of required size factory made for mounting switch, regulators etc with and including 3 mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following. Make of wire: Finolex, Havells, Polycab, Grandlay, SCI Make of Conduit :- AKG plastic Pvt Ltd., Bhagwati plastic and Agriculture Ind. Polycab, Finolex. Note: (i) The quoted rates shall be deemed to be inclusive for making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way switch 5 Amps

One fan point point controlled by one, one way switch 5 Amps .

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

One bell point controlled by one, bell switch 5 Amps

All as per item No.138 above but with stranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

Supply and fix Switch piano, flush type, single pole one way, 5 Amp complete all specified and as directed Make:- Anchor/SSK/Havells

Supply and fix Switch piano, flush type, single pole ,one way15 Amp complete all specified and as directed Make:- Anchor/SSK/Havells

Supply and fix Socket outlet, multipurpose, 2 in 1, 5 pin, 5 Amp complete all specified and as directed Make:- Anchor/SSK/Havells

Supply and fix Socket outlet, multipurpose, 2 in 1, 5 pin, 15 Amp complete all specified and as directed Make:- Anchor/SSK/Havells

Supply and fix Electronic step rotary type fan regulator 100W, 230 volts AC 50Hz complete all as specified and directed Make:- Anchor/SSK/Havells

Supply and fix Bell push, flush type, single pole two way,5 Amp complete all specified and as directed Make:- Anchor/SSK/Havells

Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in Non metalic PVC conduit not less than 25mm dia concealed in wall with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including modular metal flush box of required size factory made for mounting Modular switch, regulators etc with and including Modular cover and frame , ISI marked, for the following including taking down old unsv point wiring with connected accessories. Make of wire:Havells/ Polyacab /Grandlay/ Finolex/ SCI. Make of conduit: AKG Plastic Pvt Ltd./Bhagwati Plastic & Agriculture industry /Polycab Note : (i) Point wiring & earth wire shall be connected to each & every sunken box. (ii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way switch 5 Amps

One light point controlled by two, two way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

One bell point controlled by one, bell switch 5 Amps

All as per item No.146 above but with stranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

All as per item No.146 above but with stranded copper conductor 4 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 4 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly. (For new Geyser)

Supply and fix modular switch 1 way 6A, 1 Module Make:- Havells ORO (White)/ Legrand Lyncus/ Schneider zencelo

Supply and fix modular switch 2 way 6A, 1 Module Make:- Havells ORO (White)/ Legrand Lyncus/ Schneider zencelo

Supply and fix modular switch 1 way 16A, 1 Module with indicator lamp Make:- Havells ORO (White)/ Legrand Lyncus/ Schneider zencelo

Supply and fix modular bell push 6A, 1 Module Make:- Havells ORO (White)/ Legrand Lyncus/ Schneider zencelo

Supply and fix modular socket 6A, 2/3 pin combined 2 Module Make:- Havells ORO (White)/ Legrand Lyncus/ Schneider zencelo

Supply and fix modular socket 6A/16A, 2/3 pin combined 2 Module Make:- Havells ORO (White)/ Legrand Lyncus/ Schneider zencelo

Supply and fix modular fan regulators step type 2 module 120W Make:- Havells ORO (White)/ Legrand Lyncus/ Schneider zencelo

Supply and fix lamp Angular holder insulated body with back plate suitable for batten fittings all as specified and directed. Make:- SSK, Anchor, Havells Reo

Material and labour for ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as directed. Make: SSK/ Anchor/ SSK/ Havells Reo.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed.

Supply and Fix Aesthetically designed surface mounted LED batten, STELLA GLAMTUBE 20W 4000K, 1800 Im Polycarbonate housing with polycarbonate diffuser & integrated electronic driver connected the same with using PVC sheathed, insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose complete all as specified and as directed. Make : LHEWAJPGPV1F020 of havells/ Crompton/Philips

Supply and Fix Aesthetically designed surface mounted LED batten, VANESSA GLAMTUBE 20W 4000K of lumens 1600 Im Polycarbonate housing with polycarbonate diffuser & integrated electronic driver, connected the same with using PVC sheathed, insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose complete all as specified and as directed. Make : LHEWAJPGPV1F020 of havells/ Crompton/Philips

S& F bed side wall light model metalit with diferent finish with soda glass type suitable for 9/12W and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to wall including taking down existing fitting complete all as specified and directed. Make : LHFHBADBTB1X007 of havells/ Crompton/Philips

Supply and fix florettle WLS 1E27 CGN decorative wall, stainless steel, rust free fixture with white glass diffuser suitable for 9/12 LED lamp and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to wall including taking down existing fitting complete all as specified and directed. Make: LHDOAJD1TZAIO6O of Havells/Crompton/Philips

Supply and Fix in repair LED street/Security wall mounted light fitting of lumens 2550 lm ,Single Piece High pressure die cast aluminium,system efficacy 1100L/W,Epoxy powder coated with any additional treatment for smooth and anti corrosive finish, fully diffused ,Polycarbonated Cover for More protection ,inbuilt electronic driver IP 66 ,High bright LED with Lens, colour temp Not less than 5700 Cool Day Light,colour rending index not less than 70 ,life not less than 50000 hrs,inbuilt electronic driver with 325V Auto Cut off Restart feature & 440V Phase to Phase protection till 8 hour, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz ,surge protection minimum 4 KV, including connected the same with using PVC sheathed , insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose including taking down old unsv light fitting complete all as specified and directed. Make: - PHILIPS /CROPTON/HAVELLS.

Supply and fix ceiling Fan complete with blades,down rods ,230 volts ,1200 mm sweep ,min air delivery 210 CFM with service value 6.00 BEE ,with Bushless direct current motor (BLDC) complete all as specified. Make:- Atomberg,Havells,Cromption.

S & F sub main wiring with PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in existing Concealed conduit including one run PVC insulated unsheathed cable with multi stranded copper conductor as a earth continuity and connected upto DB of following sizes complete all as specified and directed. Note:Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. Make:- SCI, Havells, Grandlay, Polycab.

2 x 10 Sqmm + 1 x 10 sqmm (From Main DB to Sub DB of Qtr )

2 x 4 + 1x4 Sqmm ( For AC Sub main )

Supply and fix metal body exhaust fan 300 mm sweep, 900 rpm 230 volts 5h Hz, energy saving model single phase copper wound motor, grey in colour complete with blade, box type louvers etc complete all as specified and directed. Make:- Havells, Crompton, Orient.

Supply and fix exhaust Fan ,made of sturdy Engineering plastic complete with louvers shutter,voltage 230volts ,50HZ,RPM 1200,copper winding of sweep 250mm including cutting holes on wall and making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. Make:- Havells, Crompton, Orient.

S&F Water heater (Geyser) storage type, electric,capacity 25 litres five star rated AC SP 230 volts, 50 Hz, vertical mount type, shockproof and rustproof metal body, stainless steel inner container, high efficiency heating element, autocut thermostate, pressure release safety system,NRV , fire retardent cable with 3 pin plug top, white colour including fixing accessories like fastensers, nuts, washers complete all as specified and directed. Make:- Jaquar, Havells (Adonia series), Bajaj.

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm thick GI wire by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to main switch board,including all necessary excavation & earth work in hard dense soill including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternate layers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover10mm thick hinged to CI frame and 6mm MS rod for handle and necessary testing complete all as shown in electrical plate No 3 of SSR part-I (2009) all as specified and directed.(one earthing for each main Panel )

Fixing only and connecting up electric meter taking down against item No133 here-in-before.

S & F MCB DB complying with IEC 61439 -1 & 3., sheet metal enclosures double door .The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts 2 in 1 shutter (Metal Door) with IK09 type with blanking plates where required and IP 43 degree protection, the DB door should be hinged type and possible to reversible at site.The DB door shall have overhang, to gel with wall properly.The DB shall be supplied with all insulated N. Bar riveted on Din channel frame and should not restrict cable entry from top or bottom.The DB shall have plastic knobs on shield to hold complete all as directed. All the above mentioned specs the technical documents from OEM shall be provided at the time of bidding of following capaity . Make:- Havells, Indo Asian, HPL.

(a) MCB DB SPN,12 ways

(b) MCB DB SPN,8 ways .

S & F sheet metal enclosure, single pole and neutral with two pin and earth plug and socket with and including one single pole MCB 20 Amps, , complying to IS/IEC 60898, 240 volts 'C' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 6A to 63A . The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable. The MCB shall have the termination capacity of 35 Sq mm. The MCB shall have electrical life 20,000 operations up to 32A and 12,000 operation up to 63A including connection with suitable size copper lugs complete all as directed. All the above-mentioned specs technical documents from OEM shall be provided before execution work. Make:- Havells, Indo Asian, HPL.

S & F MCB SP /SPN complying to IS/IEC 60898, 240 volts 'C' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 6A to 63A . The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable. The MCB shall have the termination capacity of 35 Sq mm. The MCB shall have electrical life 20,000 operations up to 32A and 12,000 operation up to 63A including connection with suitable size copper lugs complete all as directed. All the above-mentioned speification/ technical documents from OEM shall be provided before execution of work following capaity:- Make:- Havells, Indo Asian, HPL.

(a) MCB SP 240 volts, 50 Hz capacity 6-32 Amps

(b) MCB SPN 240 volts, 50 Hz of capacity 40 Amps

( c)SPN 240 volts, 50 Hz capacity 63 Amps

(d) MCB SP 240 volts, 50 Hz capacity 63 Amp

S & F in repair Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall and suitable for universal mounting with 250 Amps fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 DB,S protection,415 volt ,suitable for fixing FP MCCB 100/125 Amps as incomer and 24 SP MCBs or 4/8/ 12 TP MCBs (or any combination of SP/TP MCBs) outgoings of following capacity and making good the distrubed surface complete all as directed. Note: Suitable MCCB and outgoing MCBs will be measured separately under relavant items of this schedule) Make:- Havells, Indo Asian, HPL.

4 Way VTPN DB (FP MCCB +12 MCB,C). Make :legrand Cat No. 507745 equvilent in L&T, ABB, Schneider

S & F MCCB ,4 pole ICS=100% ICU at 415 volts with rupturing capacity 16 KA with thermal-magnetic release and adjustable overload setting . The MCCB shall have a Mechanical life = 40000 operations & Electrical life = 8000 operations of following capacity complete all as directed.

S & F LED lamp 12 W suitable for Angle holder pendant fittings

Supply and fix concealed in wall Rigid non metalic PVC conduit of , inclusive of boxes (junction/terminal)but inclusive of all tees,bend ,elbow reducers, bell mouth tube ends and fixing acessories such as couplers,lock,nut saddles,pipe hooks all as specified and directed. Make of conduit: Finolex

20mm dia

S&F RJ-11 Double socket with shutter 1 module with outer cover and frame including metal modular flush box complete all as specified and directed .Make : Legrand /Havells/ Anchor

S&F TV socket 1 module with outer cover and frame including metal modular flush box complete all as specified and directed .Make : Legrand /Havells/ Anchor

S &F Polycarbonate 2 pair 0.4mm thickness Telephone wire including connecting up to the Tele socket complete all as specified and directed .Make : Legrand /Havells/Anchor

S &F RG-6 black copper PVC Insulated TV wire including connecting up to the TV socket complete all as specified and directed .Make : Legrand /Havells/ Anchor

sath sahib associates

CHITTER MAL & CO

M/S VIJAY TRADERS

M/S Manmohan Singh Anand

M/s Shrangi Rishi Construction

Ms dev associates