GE P/DDN/T-15 OF 23-24

Amount

Dismandling and taking out the existing corroded /scaled GI pipe with fittings connections from trenches, walls, ceiling or floor and removal from site or disposed off for the following sizes complete all as specifed and directed. (a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

(d) 40 mm boare

(f) 50 mm bore

Supply, Laying, fixing & testing galvanished iron water tubing 'medium grade ISI marked with and inclduing all GI fittings such as flanges, unions reducers sockets, socket reducing bends, elbows, tee, check-neut, caps, plugs etc laid in trenches on wall including making good the distrubed surfaces for the following sizes complete all as specifed and directed. (a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

(d) 40 mm boare

(e) 50 mm bore

Fixing only GI pipes to walls/chases/ceilings or laying in floors/trenches 'medium grade; with and inclduing all GI fittings such as flanges, unions reducers sockets, socket reducing bends, elbows, tee, checkneuts, caps, plugs etc laid in trenches including making good the distrubed surfaces for the following sizes complete all as specifed and directed. (a) 25 mm bore

(b) 40 mm bore

(c) 50 mm bore

Dismantling/taking out defective gate valve any type and S&F for Gun metal gate valve ISI marked with iron wheel head by screwing/cutting of existing pipe lines for the following size complete all as specifed and directed. (a) 20 mm bore

(b) 25 mm bore

(c) 50 mm bore

S&F in repair Ball brass valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0mm - 2 1 0 gms for the following size complete all as specifed and directed. (a) 20 mm bore

(b) 25 mm bore

(c) 50 mm bore

M&L for Ductile Iron pipes with spigot and socket ends centrifugally cast class K-7 in any length, laid in trenches including taking down of following sizes :- (a) 100mm bore

(b) 150mm bore

(c) 200mm bore

Supply and fix in replacement of flanged type Sluice valve hand wheel operated CI Body with SS spindle PN-1.6 rating,with nut bolts and washer of suitable size complete all to entire satisfaction and as per IS-14846 including taking down of following sizes:- (a) 100mm bore

(b) 150mm bore

(c ) 200 mm bore

S&F in replacement of CI/DI Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot or flanged) collars, caps and plugs upto 150mm bore, ISI Marked complete all as specified and directed.

Excavation in trenches in any type of soil not exceeding 1.5 Meter wide and not exceeding 1.5 Meter deep in any type of soil including cutting in slopes etc for laying of pipe line including getting out, complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers in soft /loose soil not exceeding 25cm in each layer complete all as specified and directed.

Removal of excavated material (Soil) to a distance up to 50 Meter from starting point and depositing where directed at level not exceeding 1.5 Meter above complete all as specified and directed.

Disconnecting & taking out the existing non functional Oil immersed star delta starter of any description, any capacity and in any position, 3 phase, 415 volts, 50 Hz suitable for AC supply submersible pump set upto 75 to 125 HP & strip opening of Star delta starter, taking out unserviceable/defective wiring & parts, cleaning and servicing complete including replacement of unserviceable parts, replacement of unserviceable wiring with new copper wire cable of existing size, reassembling, fixing in position, making connections and testing complete all as specified and directed. Note : Spares shall be paid for seperately.

All as per above item but of capacity 15 HP to 50 HP.

Supply of stable bleaching powder Grade–I conforming to IS-1065/1989 (IInd Revision) as amended upto date having available chlorine contents minimum 34% by mass and packed in 25 Kg polythene bag having double fold complete all as specified and directed, Make:- Grasim/Shriram to store of AGE B/R Chakrata. Bleaching powder (Calcium Hypo Chloride), Chlorine formula : Ca (OCl)2 Molecular weight : 142.96, Physical Appearance : white fine powder, Chlorine content :- 30 % ± 1%, Moisture : 0.5 % Max On heating at 10 ± 2°C it dose not lose more than 1/15 of available chlorine Passing through 1.7mm sieve : 99%

Supply of Alum Ferric Sulphate (Grade-4) (best quality as per sample) for purification of water (containing lead (as PB) 30 ppm max and arsenic 6ppm max) confirming to IS-299/2012 (Revised) as amended up-to-date to store of AGE B/R Chakrata complete all as specified and directed (Note:- The Alumino Ferric Sulphate shall be supplied in superior quality (Slabs) as per IS specifications.

Supply only lime of superior quality to store of AGE B/R Chakrata as per sample all as directed.

Supply of Poly Aluminum Chloride AC-100S powder inorganic soluble polymer powder effective in both high and low turbidity for rapid and better floc formation with much lower dosing rates, less sludge rates, less sludge generation, less PH reduction in factory sealed container/ plastic bag of 25 Kg each, to store of AGE B/R Chakrata complete all as specified and directed.

M&L for Brickwork with subclass 'B' bricks, straight or curved on plan exc '6m mean radius built in cement mortar 1:3 as in foundation complete all as specified and directed

M&L for Rendering 10 mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strengthn of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

M&L for new surface of painting of different sizes connecting pipes Valve pit chamber covers, rolling shutters, MS pipe, pump set and its related items including writing letters on pump motors etc at various installations as per colour code with one coat of primer and two coat of synthetic enamelled paint all as specified and directed

Material and labour for fixed in repair for any type of structural steel sections, nut-bolt, washers, sheets, back plate, xpm mesh, wire mesh, bending, cutting in shape, welding, drilling holes, MS flanges including painting with two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using (20 mm graded stone aggregate) as in mass concrete (for pump set foundation etc) and similar work including necessary form work finished even and smooth complete all as specified and directed.

S&F display board for plants/equipments of size 2000mm x 1000mm Flex sheet duly background in blue and matter in white colour fixed on MS frame alongwith necessary fixing arrangements for water supply installation as per sample complete all as specified and directed

S&F display board for water supply distribution network skematic diagram of size 2000 mm x 1000 mm Flex sheet duly background in blue and matter in white colour fixed on MS frame alongwith necessary fixing arrangements for water supply installation as per sample complete all as specified and directed

Taking up or down PVC pipe from trenches including dismentling & removing for disposal for the pipes of 160 mm bore complete all as specified and directed.

Supply & fixing high density polyethylene pipe (HDPE) 160 mm bore of presure rarting PE 100 PN 10 as per IS 4984-2016 Black colour complete with all fittings required at site complete all as specified and directed. Make : Polytuf/supreme/Jindal. Note : (i) Cost of the all jointing material & fittings such as Tee, Bend, Socket etc are included in the cost of item rate.

Ansh Enterprises

KRISHANA ELECTRIC WORKS

P S TRADERS

BARAF SINGH CHAUHAN