Loading
Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹1.7 L
Closing Date
20 Jul 2026, 11:00 pmClosed
Karnataka Power Transmission Corporation Limited
AEE-1
Increasing the Vertical Clearance of existing 220kV Hoody-Malur SC Line between Tower no.16 and Tower no.22 in Anugraha Layout by providing 3 Nos of proposed new intermediate towers of 220kV DD plus zero Gadag-Bagalkote design tower, 220kV DB/DE plus 6 NBT NRS-Laggere design Tower and 220kV DB/DE plus0 NBT NRS-Laggere design Tower in TLM Sub-division, Hoody, Bengaluru
KPTCL/2024-25/TL/WORK_INDENT1855/CALL-7
KPTCL/2024-25/TL/WORK_INDENT1855/CALL-7
Open
Transmission Line
Two Tender Document System(Two Cover)
KPTCL SEE Transmission And Mantainance Circle BMAZ South Bengaluru
17 documents required · 17 mandatory
The bidder should have satisfactorily completed in the last five years at least one work of Construction of Stations/Transmission Lines/ Erection of Towers/Maintenance or rectification work of EHV Transmission lines/ One Terminal Bay of 66KV class or above voltage class on Total Turn Key, Partial Turnkey basis for the last five financial years in KPTCL/PGCIL/NHPC/NTPC/ any Govt., or public sector under takings & produce experience and performance certificate duly signed by competent authorities not below the rank of the Executive Engineer Electrical, which shall be in satisfactory service for a period of One year prior to date of submission of the Bid
The Bidder should possess valid Super Grade Electrical Contractors License issued by the Government of Karnataka as on the date of Bid Submission
details of other works on hand and ongoing contractual commitments
The Bidder must not have Black listed by ESCOMS/other electrical utilities/who are in the business of distribution of power
The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the preceding five years. A consistent history of awards involving litigation against the Bidder may result in rejection of bid.
An undertaking to source the supply of equipment/ material from KPTCL approved vendors only
Certificate is to be uploaded by the Bidder agreeing to source the equipment/material for the work from the approved vendors who meet the eligibility clauses regarding restrictions on procurement from a country which shares a land border with India as specified in Annexure XVIII of the tender documents
A Certificate is required to be uploaded by Bidder regarding restrictions on procurement from a Bidder of a country which shares a land border with India in the format as specified in the clause No.1.5 of Annexure XVIII of the tender documents
The bidder should have valid GST registration with GSTIN number, PAN Card
No Deviation Certificate
EPF and ESI registration Certificate
Letter of Undertaking as in Annexure
Self declaration regarding Risk & Cost
Filled Techno commercial sheet
valid labour license certificate issued by the Government of Karnataka
Self declaration regarding Risk & Cost
Any other documents as per tender documents
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity (Calculation enclosed in NIT)
₹2,760
₹1.7 L
6 Jul 2026
6 Jul 2026
22 Jul 2026
15 Jul 2026
13 Jul 2026
increasing the Vertical Clearance of existing 220kV Hoody-Malur SC Line between Tower no.16 and Tower no.22 in Anugraha Layout by providing 3 Nos of proposed new intermediate towers of 220kV DD plus zero Gadag-Bagalkote design tower, 220kV DB/DE plus 6 NBT NRS-Laggere design Tower and 220kV DB/DE plus0 NBT NRS-Laggere design Tower in TLM Sub-division, Hoody, Bengaluru
1.Fabricated Steel members for 220kV DD+0, Gadag-Bagalkote narrow base towers a) DD type tower MS 2.Fabricated Steel members 220kV DB/DE+6 NRS-Laggere design narrow base towers a) DB/DE type tower MS...
1.Fabricated Steel members for 220kV DD+0, Gadag-Bagalkote narrow base towers a) DD type tower HT b) HT for Stub
2.Fabricated Steel members 220kV DB/DE+6 NRS-Laggere design narrow base towers a) DB/D...
Supply of galvanized Bolts & Nuts
Phase plate (Set of 6 No.)
Grounding of tower including the cost of 40 mm dia 2.5mm thick, class C GI pipe of 3 mtrs length with 50 x 6 mm GL flats 3 mtrs long, salt charcoal, including excavation charges.
Copper earth bond 450 mm.
Drake ACSR for Plain Terrain
7/3.65 mm GI Wire for Ground conductor.
INSULATOR STRINGS WITH CLAMPS, ARCING HORNS AND HARDWARE for ACSR DRAKE ACSR: : 120kN Disc Insulators. (16 discs/string therefore, 16*18=288)
INSULATOR STRINGS WITH CLAMPS, ARCING HORNS AND HARDWARE for ACSR DRAKE ACSR: :Single Tension string of 16 units of 120kN Disc Insulators each along with hard ware for DRAKE ACSR and arcing horn
M S C Joints suitable for Drake ACSR
Repair sleeves suitable for Drake ACSR
P G Clamps suitable for Drake ACSR
Vibration dampers for Drake
Single suspension clamps for Ground Conductor
PG Clamps for Ground Conductor
C Type Wedge Connector Drake-Drake ACSR
Check survey using their own equipment for 220 kV Plain terrain.(As per MWSR-2023 Pg.no:155, item no. 3)
1.Fabricated Steel members for 220kV DD+0, Gadag-Bagalkote narrow base towers a) DD type tower MS
2.Fabricated Steel members 220kV DB/DE+6 NRS-Laggere design narrow base towers a) DB/DE type tower M...
1.Fabricated Steel members for 220kV DD+0, Gadag-Bagalkote narrow base towers a) DD type tower HT b) HT for Stub
2.Fabricated Steel members 220kV DB/DE+6 NRS-Laggere design narrow base towers a) DB/D...
Supply of galvanized Bolts & Nuts
Setting of stub templates and aliging dismantling and transportation of templates from one location to another location (As per MWSR-2023 Pg.no:113 item:1.1(b))
Sorting of Tower parts made of fabricated angle iron. (As per MWSR-2023 Pg.no:113 item:1.1(a)) (Sum of all the tower weights)
Supplying and fixing G.I. Angle iron 45 x 45 x 5 mm (1 m length)
with cleats, bolt & nuts as per specification and fixing above
0.5 m length each at inner and outer surface of the tower to
Supplying and fixing Barbed wire as per specification.
Phase plate (Set of 6 No.)
Grounding of tower including the cost of 40 mm dia 2.5mm thick, class C GI pipe of 3 mtrs length with 50 x 6 mm GL flats 3 mtrs long, salt charcoal, including excavation charges.
Rivetting of tower bolt ends by heating using dry-acetylene gas
and hammering to destroy threads so as to make the tower
members theft - proof (600 Bolts/Tower)
Welding of bolts & nuts
Re-Stringing: (Complete Existing Drake) Paving out conductor from anchor to anchor normally
spaced at 5 spans with 4 tangent towers in between, including
Stringing: (New Drake) Paving out conductor from anchor to anchor normally
spaced at 5 spans with 4 tangent towers in between, inclu...
b) stringing of ground conductor 7/3.65 mm earth wire without allowing the conductor to touch the ground and without damaging the conductor.
Dismantling existing 220kV SC (SA+0) Tower No.18,19 & 20 without stub.
Releasing of existing ground wire.
Normal Soil- Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of so...
Dry Fissured/Ordinary Rock: Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in ...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, ty...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender Document 220kV Hoody-Malur-Anugraha layout.zip
Tender Document • 0.95 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .