Repair to certain wooden furniture under GE Dehradun.

Amount

Chair Dining :- Rear Legs - Taking down old u/s Rear Leg and material and labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front Legs - Taking down old u/s Front Leg and material and labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Side Rail - Taking down old u/s Side Rail and material and labour for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front or Back Rail - Taking down old u/s Front or Back Rail and material and labour for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Bottom Stiffener - Taking down old u/s Bottom Stiffener and material and labour for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Back Strip - Taking down old u/s Back Strip and material and labour for New back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Bracket - Supply and fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Shoes -material and labour for removing old/worn out rubber shoes with Supp;y and fix new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Polishing - All & new old surface with two coats of french polish after prepartion of old surface complete all as specified & directed by Engr-in-Charge.

Chair Writing

Rear Legs Taking down old u/s Rear Leg and material and labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front Legs Taking down old u/s Front Leg and material and labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Side Rail Taking down old u/s Side Rail and material and labour for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front or Back Rail Taking down old u/s Front or Back Rail and material and labour for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Bottom Stiffener Taking down old u/s Bottom Stiffener and material and labour for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Back Strip Taking down old u/s Back Strip and material and labour for New back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Bracket : Supply and fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Shoes : material and labour for removing old/worn out rubber shoes with supply and fix new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Arms Rest: Taking down old u/s Arms Rest and material and labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Chair Easy

Rear Legs : Taking down old u/s Rear Leg and material and labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front Legs: Taking down old u/s Front Leg and material and labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Side Rails of Seat: Taking down old u/s Side Rails of Seat and material and labour for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front/ Back Rails of seat : Taking down old u/s Front / back Rail of Seat and material and labour for New front / back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Side Rail Back: Taking down old u/s Side Rail of Back and material and labour for New side rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Top/Bottom Rail of Back: Taking down old u/s Top/Bottom of Back and material and labour for New top / bottom rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front Support Rail : Taking down old u/s Front Support Rail and material and labour for New support rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Shoes :- material and labour for removing old/worn out rubber shoes with supply & fix new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Arms Rest: Taking down old u/s Arms Rest and material and labour for New arms rest made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Chair Dining Officer

Rear Legs Taking down old u/s Rear Leg and material and labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front Legs Taking down old u/s Front Leg and material and labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Side Rail Taking down old u/s Side Rail and material and labour for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front or Back Rail Taking down old u/s Front or Back Rail and material and labour for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Bottom Stiffener Taking down old u/s Bottom Stiffener and material and labour for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Back Strip Taking down old u/s Back Strip and material and labour for back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Bracket : Supply and fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Shoes : material and labour for removing old/worn out rubber shoes with supply and fix new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Removel of old cushion and Supply and fixing of new seat cusion of 75 mm thick 40 density complete with approved tepestry. Rate of tapestry should not be less than Rs 350/- per RM. Rest all as shown on drawing and as directed by the Engr - in - Charge.

Polishing: All new &old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Bed Hard

TOP : Material and labour shall be provided for replacement of worn out plywood top from Bed Hard/Bed Newar, supply and fix New Plywood top of 12 mm thick, BWR grade, ISI Marked confirming to IS-303 Make : Greenply/Archidply/Century in one piece, fixed with suitable screws complete, all as specified on drg and as directed by Engr-in-Charge.

Long Rail : Material and labour for replacement of old broken long Rail made out of teak wood Rest all as per drg.

Short Rail : Material and labour for replacement of old broken short Rail made out of teak wood Rest all as per drg.

Head Board : Material and labour for taking out all broken worn out component of head board and provide frame of teak wood and Teak face ply one side and other side commercial ply BWR ISI Marked grade all as per drg.and as directed.

Foot Board : Material and labour for taking out all broken worn out component of head board and provide frame of teak wood and Teak face ply one side and other side commercial ply BWR ISI Marked grade all as per drg.and as directed.

Middle Stiffner : Material and labour for replacement of old broken stiffener with new one made out 2nd class hard wood., Rest all as per Drg.

Steel bent clamp for corner :Supply and fix MS clamp made out mild steel flat iron size 35 mm x 5 mm including 2 coats of synthetic enemel paint over a coat of redoxide primer.

Polishing: All new &old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Chair WBB

Rear Legs Taking down old u/s Rear Leg and Material and labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Front Legs Taking down old u/s Front Leg and Material and labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Side Rail Taking down old u/s Side Rail and Material and labour for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Removing of old broken Seat and supply and fix new seat of Existing size with 50mm thick Foam cushion Pasted with suitable adhesive over 12mm thick plywood fixed on IInd Class HW frame & Seat surface covered with best quality tapestry cover &screwed to track rail as directed by Engr-in-Charge.(cloth should not less than@350/-mtr)

Bottom Stiffener Taking down old u/s Rear Leg and Material and labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Back Strip Taking down old u/s Rear Leg and Material and labour for New back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Shoes: Material and labour for taking out worn out/unserviceable shoes from legs supply and fix new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Bracket : Supply and fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Sofa Set 4 Seater

Front/Rear legs : Taking down old U/S front/ rear leg of sofa set 4 seater and S& F new front/ Rear leg of teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

Side Back/Front Rail : Taking down old U/S Side back/Front Rail of sofa set 4 seater and S& F new Side back/Front Rail of teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge Back/ Front.

Battens for Seat/Back : Taking down old U/S batterns for seat/back of sofa set 4 seater and S& F new batterns for seat/back of teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

Arms : Taking down old U/S front/ Arms of sofa set 4 seater and S& F new Arms of teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

Cushion for Seat : Removing of existing U/S cushion from seat of sofa set 4 seater and S & F new foam cushion 100 mm thick 40 density Make : Kurlon/sleepwel duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 550.00 Per RM)

Cushion for Back : All as per item No 7.05 here-in-before but Cushion for Back.

Shoes : Material and labour for taking out worn out/unserviceable shoes from legs supply and fix new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Cover Only for Sofa Set 4 Seater : Opening and taking out old unserviceable Cushion Cover size 21"x22"x4" and supply and fix New Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 550.00 Per Sqmt)

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Sofa Set 5 Seater

Front/Rear legs : Taking down old U/S front/ rear leg of sofa set 5 seater and supply and fix new front/ Rear leg of teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

Back/Front Rail of 3 seater : Taking down old U/S Side back/Front Rail of sofa set 5 seater and supply and fix new Side back/Front Rail of teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge Back/ Front.

Battens for Seat/Back : Taking down old U/S batterns for seat/back of sofa set 5 seater and S& F new batterns for seat/back ofteak as per existing shape and size complete all as specified in drawing and as directed by Engr-in-Charge

Arms : Taking down old U/S front/ Arms of sofa set 5 seater and S& F new Arms of teak wood as per existing shape and size complete alll as specified in drawing and as directed by Engr-in-Charge

Cushion for Seat : Removing of existing U/S cushion from seat of sofa set 5 seater and S & F new foam cushion 100 mm thick 40 density Make : Kurlon/sleepwel duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 550.00 Per RM)

Cushion for Back All as per item No 8.05 here-in-before but Cushion for Back.

Shoes : Material and labour for taking out worn out/unserviceable shoes from legs supply and fix new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Cover Only for Sofa Set 5 Seater :- Opening and taking out old unserviceable Cushion Cover size 21"x22"x4" and supply and fix New Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 550.00 Per Sqmtr.)

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Stool Dressing cushion

Back : Taking down old U/S back side board of stool dressing and supply and fix new back made of Post Forming top on 18 mm thick plywood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

Front and sides : Taking down old U/S front/side board of stool dressing and supply and fix new back made of Post Forming top on 18 mm thick plywood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

Top : Taking down old U/S top of stool dressing and supply and fix new back made of 12 mm thick plywood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

Bottom : Taking down old U/S bottom of stool dressing and supply and fix new back made of 6 mm thick plywood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

Wheel : Taking down old U/S wheel of stool dressing and supply and fix new wheel of size 50 mm as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

Polishing:All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Table Dressing Ladies

Mirror : Removing of old/worn out U/S mirror and Material and labour for fixing new mirror 5 mm thick mirror ( Make : MODI GUARD/ATUL) as per size shown on drg & directed .

Back ply of mirror :Removing UNSV back from the mirror and supply and fix new back made out of 6 mm thick ply wood BWR grade. Rest all as specified in the drg and as directed by Engr in Charge.

Top : Removing UNSV top and supply and fix new top made out of 18 mm thick pre laminated MDF Board exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.

Bottom : Removing UNSV bottom and supply and fix new Bootom made out of 12 mm thick plywood. Rest all as specified in the drg and as directed by Engr in Charge.

Drawer : Material and labour for removing old worn out drawer from the table and new drawer made out of 18 mm thick perlaminated MDF board specified in the drg and as directed by Engr in Charge .

Knob : Material and labour for removing unservicable knob from the table and supply and fix new CP knob 40mm to suit to the drawer. Rest all as specified in the drg and as directed by Engr in Charge.

Cushion : Taking down old U/S cushion and supply and fix new cushion 32 density and 75 mm thick complete with upholstry ( not less than Rs 550 /- per RM) as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge

Shutter : Material and labour for removing old worn out shutter the table and supply and fix new shutter made out of 18 mm thick perlaminated MDF board specified in the drg and as directed by Engr in Charge .

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Table Bed Side

Top / Shelfs : Removing UNSV top/shelf and supply and fix new top/shelf made out of 18 mm thick WPC Board (ISI Marked)Rest all as specified in the drg and as directed by Engr in Charge.

Side : Removing UNSV side and supply and fix new side made out of 18 mm thick WPC Board (ISI marked) . Rest all as specified in the drg and as directed by Engr in Charge.

Back : Removing UNSV back and supply and fix new back made out of 18 mm thick WPC Board (ISI Marked).Rest all as specified in the drg and as directed by Engr in Charge.

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Table 3 x 3

Top : Removing UNSV top and supply and fix new top made out of 18 mm thick pre laminated MDF Board exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.

Leg : Removing UNSV leg and supply and fix new leg made out of teak wood as per existing shape and size. Rest all as specified in the drg and as directed by Engr in Charge.

Front/side Rail : Removing UNSV front rail and supply and fix new front rail made out of teak wood as per existing shape and size. Rest all as specified in the drg and as directed by Engr in Charge.

Bracket : supply and fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Shoes :Material and labour for taking out worn out/unserviceable shoes from legs supply and fix new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Table officer

Top : Removing UNSV top and supply and fix new top made out of 18 mm thick pre laminated MDF Board exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.

Leg : Removing UNSV leg and supply and fix new leg made out of teak wood as per existing shape and size. Rest all as specified in the drg and as directed by Engr in Charge.

Drawer : Material and labour for removing old worn out drawer from the table and supply and fix new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .

Shutter : Material and labour for removing old worn out shutter the table and supply and fix new shutter made out of 18 mm thick perlaminated MDF board specified in the drg and as directed by Engr in Charge .

Bracket : supply and fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Bottom Stiffener Taking down old u/s Rear Leg and Material and labour for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.

Shoes : Material and labour for taking out worn out/unserviceable shoes from legs supply and fix new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Side Board

Top : Taking down old u/s Top and Material and labour for New Top made out of 18/19mm pre laminated MDF Board exterior grade Exterior grade complete all as specified in drg and as directed by Engr-in-Charge.

Legs : Taking down old u/s Leg and Material and labour for New leg made out of teak wood all as specified in drg and as directed by Engr-in-Charge.

Long Rail : Taking down old u/s Long Rail and Material and labour for New Long Rail made out of teak wood all as specified in drg and as directed by Engr-in-Charge.

Short Rail : Taking down old u/s Short Rail and Material and labour for New Short Rail made out of teak wood all as specified in drg and as directed by Engr-in-Charge.

Shutter : - Material and labour for removing old worn out shutter and supply and fixing new shutter made out of 18/19 mm Prelaminated Particle board exterior grade duly edging 5 mm thick teak wood beading after removing old UNSV edging . Rest all as per drg .

Drawer : Material and labour for removing old worn out drawer from the table and new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge

Side LT/RT Taking down old u/s Side LT/RT and Material and labour for New Side LT/RT made out of 18/19mm pre laminated MDF Board exterior grade complete all as specified in drg and as directed by Engr-in-Charge.

Back :- Material and labour for removing old worn out Back from the Side Board and new Back made out of 6mm Plywood commercial BWR grade. Rest all as specified in the drg and as directed by Engr in Charge.

Knob : Material and labour for taking out old worn out knob from the drawer of the table and supply and fix new knob of best quality approved by GE/Engr-in-Charge. Rest all as specified or as directed by Engr in Charge.

Shoes : Material and labour for taking out worn out/unserviceable shoes from legs supply and fix new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Bin Soiled Linen

Top : Material and labour for removing old worn out top and new top made out of 18/19 mm pre laminated MDF Board exterior grade duly edging 5 MM thick teak wood beading after removing old UNSV edging. Rest all as specified in drg and as directed by Engr-in-Charge.

Bottom : Material and labour for removing old worn out bottom from bins, supply and fix new Bottom made out of second class. Rest all as specified in drg and as directed by Engr - in -Charge.

Back : Material and labour for removing old worn out back of the bins and new made out of 6 mm thick commercial plywood BWR Grade. Rest all as specified in drg and as directed by Engr - in -Charge.

Hings : Taking down old u/s Hinges and Material and labour for New Hinges ISI Marked size 75mm complete. Rest all as specified in drg and as directed by Engr-in-Charge

Polishing : All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Table Dressing Gents

Mirror :- Removing of old/worn out U/S mirror and M & L for fixing new mirror 5 mm thick mirror ( Make : MODI GUARD/ATUL) as per size shown on drg & directed.

Back ply of mirror : Removing UNSV back from the mirror and S & F new back made out of 6 mm thick ply wood BWR grade. Rest all as specified in the drg and as directed by Engr in Charge.

Top : Removing UNSV from the mirror and new top made out of 18 mm thick pre laminated MDF Board exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.

Bottom : Removing UNSV from the mirror and new Bootom made out of 18 mm thick pre laminated MDF Board exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.

Drawer : Material and labour for removing old worn out drawer from the table and new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge.

Knob : Material and labour for removing unservicable knob from the table and S & F new CP knob 40mm to suit to the drawer. Rest all as specified in the drg and as directed by Engr in Charge.

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Table Writing

Top : Material and labour for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. all as per specfication in drg and directed by Engr in Charge.

Legs : Material and labour for removing U/S legs from the table including supply and fixing new legs made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.

Long Rail : Material and labour for removing U/S long rail from the table including supply and fixing new long rail made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.

Short Rail : Material and labour for removing U/S short rail from the table including supply and fixing new short rail made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.

Central Stiffener : Material and labour for removing U/S stiffener from the table including supply and fixing new stiffener made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.

Drawer : Removing U/S old broken drawer and supply and fix new ,made out of teak wood well seasoned. All as shown on drawing , as specified and as directed by Engr-in-Charge.

Store Box (Back) : Removing old u/s back side board and replace with 6mm thick (BWR) commercial ply.

Store Box (Side) : Removing old u/s side and replace with 19mm thick block board teak veneer finish (One side).

Small legs : Material and labour for removing U/S legs from the table including supply and fixing new legs made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.

Shutter : Material and labour for removing U/S shutter from the table and supply and fixing new shutter made out of 18/19 mm thick prelaminated particle board exterior grade duly edging with 5 mm teak wood beading all around the top complete. all as per specfication in drg and directed by Engr in Charge.

Shoes : Material and labour for removing old/worn out rubber shoes with supply and fix new rubber shoe of superior quanlity with steel plated screws of suitable size complete all as directed by Engr-in-Charge

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Bracket - supply and fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Teapoy

Top : Material and labour for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

Long Rail : Material and labour for removing U/S long rail supply and fix New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Material and labour for removing U/S short rail supply and fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Stiffener : Material and labour for removing U/S Sstiffener supply and fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Material and labour for removing U/S Leg supply and fix New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Material and labour for taking out worn out/unserviceable shoes from legs supply and fix new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Bracket - supply and fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Table centre

Top : Material and labour for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

Long Rail : Material and labour for removing U/S long rail supply and fix New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Material and labour for removing U/S short rail supply and fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Stiffener : Material and labour for removing U/S stiffener supply and fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Material and labour for removing U/S Leg supply and fix New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Material and labour for taking out worn out/unserviceable shoes from legs supply and fix new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Bracket - supply and fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Peg Table

Top : Material and labour for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MFD board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

Long Rail : Material and labour for removing U/S long rail supply and fix New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Material and labour for removing U/S short rail supply and fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Stiffener : Material and labour for removing U/S Sstiffener supply and fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Material and labour for removing U/S Leg supply and fix New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Material and labour for taking out worn out/unserviceable shoes from legs supply and fix new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Bracket - supply and fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Table dining 6 persons

Top : Material and labour for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

Long Rail : Material and labour for removing U/S long rail supply and fix New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Material and labour for removing U/S short rail supply and fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Material and labour for removing U/S Leg supply and fix New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Material and labour for taking out worn out/unserviceable shoes from legs supply and fix new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Bracket - supply and fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Table dining 8 perosns

Top : Material and labour for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

Long Rail : Material and labour for removing U/S long rail supply and fix New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Material and labour for removing U/S short rail supply and fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Material and labour for removing U/S Leg supply and fix New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Material and labour for taking out worn out/unserviceable shoes from legs supply and fix new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Bracket - supply and fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Table 3'X2' W/O Drawer

Top : Material and labour for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

Long Rail : Material and labour for removing U/S long rail supply and fix New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Material and labour for removing U/S short rail supply and fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Stiffener : Material and labour for removing U/S Sstiffener supply and fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Material and labour for removing U/S Leg supply and fix New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Material and labour for taking out worn out/unserviceable shoes from legs supply and fix new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Bracket - supply and fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Table 3'X2' With Drawer

Top : Material and labour for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

Long Rail : Material and labour for removing U/S long rail supply and fix New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Material and labour for removing U/S short rail supply and fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Stiffener : Material and labour for removing U/S Sstiffener supply and fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Material and labour for removing U/S Leg supply and fix New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Material and labour for taking out worn out/unserviceable shoes from legs supply and fix new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Drawer : Removing U/S old broken drawer and S/F new made out of 6mm plywood commercial BWR grade. Rest all as per specification given in the drawing and directed by Engr in Charge.

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Bracket - supply and fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Table dining 1200x 900

Top : Material and labour for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge

Long Rail : Material and labour for removing U/S long rail supply and fix New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Short Rail : Material and labour for removing U/S short rail supply and fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Stiffener : Material and labour for removing U/S Sstiffener supply and fix New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Legs : Material and labour for removing U/S Leg supply and fix New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge

Shoes : Material and labour for taking out worn out/unserviceable shoes from legs supply and fix new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge

Polishing: All new & old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Bracket - supply and fix new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

CHAIR EASY CUSHIONED (WOODEN)

Removing of old broken seat with cushion and supply and fix new seat of existing shape and size with 50mm thick Foam cushion 40 density covered with best quality tapestry cloth (not less than Rs 350/-) duly stitched and fixed with suitable adhesive over 12mm thick BWR plywood surface covered & screwed to track rail as directed by Engr-in-Charge.

Removing of old broken back with cushion and supply and fix new back of existing shape and size with 50mm thick Foam cushion 40 density covered with best quality tapestry cloth (not less than Rs 350/-) duly stitched and fixed with suitable adhesive over 12mm thick BWR plywood surface covered & screwed to track rail as Drg & directed by Engr-in-Charge.

Material and labour french polishing with high class finish complete as per drawing to match the existing and all as per directed by engr-in-charge.

Removing of old unserviceable arms rest and supply and fix new arms rest of existing shape and size (65x25mm) made out of seasoned hard wood (Shisham) duly painted with synthetic enamel black paint and fixed with steel screws complete all as specified & directed

RE-CANNING OF VARIOUS TYPES OF FURNITURE

Material and labour for removing of old/broken/ unservisable plastic cane & re-canning of chair dinnig, chair CB without arms/chair writing,chairs CB with arms, chair CB office, chair easy FD/NF, chair, stool dressing CB, Couch set & bin solied linen with 2 to 2.5mm semi round cane plastic of white colour and border with 3 to 4mm semi round cane plastic of white colour. Rest all as per drawingss. The canning work shall be done in Godraj pattern. Cane should be in White colour (Non recycled) & make as approved.

M R Taders

shekhar & company

avtarsinghchaddha