Repair, improvement and painting work of Type-4 houses No. 1 and No. 2 located in VIP Colony in pooled housing residential buildings in distt. Rampur Under special repair.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. n cement mortar. (DSR 15.7.4) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): From brick work in cement mortar (DSR No.-15.8.3) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand (DSR 6.4.1 ) Including all T&P, Labour, Material, Royalty Tax but excluding GST

40mm Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate (DSR 11.3.1) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) , sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including preparation of surface but excluding grading, complete.(DSR No 22.9) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and fixing fly proof galvanised M.S. wire gauge with 2nd class teak wood beading 62X19 mm. to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm with 2nd class teak wood beading 62 x 19 mm. SOR-9.51.1 Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR 8.31) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour .Old work (one or more coats) (DSR 1.381.1) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR 13.80) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Finishing walls with Acrylic Smooth exterior paint of required shade :( Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. (DSR 13.111.1) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR 13.91) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : ( DSR No. 13.99.1) Including all T&P, Labour, Material, Royalty Tax but excluding GST

12mm thick plaster in 1:4 with cement & fine sand . (DSR 13.1.1) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. With cement mortar 1:4 (1cement: 4 coarse sand) ( DSR No. 14.1.2) Exculding G.S.T. Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. (DSR 9.20.2) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm diameter. (DSR No.- 14.28.2) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (DSR No.-17.7.1) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.17.31 Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes having thermal stabilitiy for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing tha pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvant cement and testing of joints complete as per direction of enginieer in charge. internal work exposed on wall. 15mm nominal outer dia pipes (DSR NO. 18.7.1) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Same as above but 20 mm nominal outer dia pipes. (DSR NO. 18.7.2) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Same as above but 25 mm nominal outer dia pipes. (DSR NO. 18.7.3) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore (DSR NO. 18.51.1) Including all T&P, Labour, Material, Royalty Tax but excluding GST

Providing and placing on terrace polythylene water storage tank ISI: 12701 Marked with cover and suitable locking arragemant and making necessary hole for inlet, outlet and overflow pipes without fittings and the base support for tabk. 18.48 Including all T&P, Labour, Material, Royalty Tax but excluding GST

Supply and fixing of 10cm internal dia PVC pipe, 6kg/per sq.cm. preasure make complete with bends with door at top and plain at bottom and grating and including supply of necessary M.S clamps 2.5cm x3mm fixed to walls with and including supply of 15cm long 6mm dia nails all material labour and T&P etc Required for completion of the work and also includkng repair of plaster pointing etc. If damaged during fixing of the pipe.si-730A Including all T&P, Labour, Material, Royalty Tax but excluding GST

Please Enable Macros to View BoQ information