Site Survey, Designing, Engineering, Procurement, Supply, Loading, Transportation, Unloading, Insurance, Delivery at Site, Handling, Storage, Installation, Testing, Commissioning Including Documentation of All Items/Material required to complete works for Turnkey Based Contract For Conversion of Existing 11 kV HT Line and LT Line Network Including Consumer Service Lines Into Under Ground Cable Network With Ring Main System at Talala Subdivision of Junagadh Circle Under PGVCL with GIS Mapping / Geo Urja Mapping (Developed by GUVNL) and Asset Tagging under SI Scheme (Package-46)

Conversion of Over Head to Underground Network

Talala Sub Division of Veraval Division of Junagadh Circle

Particulars of Item Grand Total in Rs.

Particulars of Item Grand Total in Rs.

SCHEDULE-B1: CONVERSION OF EXISTING OVERHEAD ELECTRICAL HT

NETWORK IN TO UNDERGROUND CABLE NETWORK

a FOR SUPPLY PART

b FOR ERECTION PART

SCHEDULE-B2: CONVERSION OF EXISTING OVERHEAD ELECTRICAL LT

NETWORK IN TO UNDERGROUND CABLE NETWORK

a FOR SUPPLY PART

b FOR ERECTION PART

A TOTAL AMOUNT (WITHOUT GST)

A TOTAL AMOUNT (WITHOUT GST)

3 BIDDER'S OFFER ( + / - ) IN % 0.00%

4 BIDDER'S OFFER ( + / - ) IN RUPEES

B OFFERED TOTAL AMOUNT FOR SUPPLY AND ERECTION (WITHOUT GST)

B OFFERED TOTAL AMOUNT FOR SUPPLY AND ERECTION (WITHOUT GST)

5 GST @ 18% ON "B"

C GRAND TOTAL (WITH GST)

C GRAND TOTAL (WITH GST)

Date Signature of Bidder Stamp

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

SCHEDULE-B1: CONVERSION OF OVERHEAD TO UNDERGROUND HT ELECTRICAL NETWORK

RMU : Supply, installation, testing & Commissioning of 11 KV SCADA,

Non-SCADA Ring Main Unit SF6 Gas Insulated as under preferably

1 Siemens/ Schneider/ABB/CG. (Including RCC foundation, masonry and

all civil works, as per approve drawing by PGVCL)

a SF6 Ring Main Unit with Non-SCADAswitching facility 630 A extensible.

Supply,installation,Testing & commissioning of 11 kV,(E),XLPE

insulated Aluminium Conductor, Armoured cable, Sand as per

a enclosed specification, including rates for approval of local Authorities

for laying of cable.(Make as approved by GUVNL) With excavations

and, back filling as per specification

Providing and Laying of HDPE ducts confirming to IS:4984 having dia.

OD/ID 140/100.mm, 6kg/cm2, 11.63 kg/6 RMT at a minimum depth of

1200mm below the road surface by push through method by drilling the road

3 with HDD machine without breaking the road surface for laying of cable for Mtrs. 4530.60 604 2735349.75 4530.60 949 4298406.75

internal GIDC road crossing for enclosing HT/LT XLPE insulated aluminum

armoured cable up to 300 sqmm through the duct as per the instructions of

EIC (Engineer In Charge).

OUTDOOR TERMINATION KIT: HT push on/heat shrink type end

termination preferably 3m(m-seal) or Raychem make at switchgear end

boxes, transformer(PAD/Pole mounted) for 3 core 11 kV XLPE

4 Aluminium Conductor Armoured cable as specified with connection of

leads including cutting, stripping of cable, insulations, providing

compression type terminals, crimping of lugs with suitable crimping

tool for outdoor application

INDOOR TERMINATION KIT : HT push on/heat shrink type end

termination preferably 3m(m-seal) or Raychem make at switchgear end

boxes, transformer (PAD/Pole mounted) for 3 core 240 Sq mm 11 kV

5 XLPE Aluminium Conductor Armoured cable as specified with

connection of leads including cutting, stripping of cable, insulations,

providing compression type terminals, crimping of lugs with suitable

crimping tool for Indoor application

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

G:STRIGHT JOINT KIT: HT push on/heat shrink type straight joint

preferably 3m(m-seal) or Raychem make for up to 3 core 300/240/185

Sq mm 11 kV XLPE Aluminium Conductor Armoured cable as specified

with connection of leads including cutting, stripping of cable,

insulations, providing compression type terminals, crimping of lugs

with suitable crimping tool.

7 Lying of all types of cable in trench(without Excavation) Mtrs. 201.36 173 34734.6

8 Lying of cable on pole Mtrs. 581.00 44 25389.7

9 Lying of the cable in the Pipe(Without Excavation) 10.07 58 578.91

10 Drilling work in Road Crossing through push through Mtrs. 10.07 569 5731.209

Drilling work in Road/ASPH/RCC /Hard Rock Etc(Excavation with back

filling as per the specification of cable lying)

Supply and fixing of GI Pipe on wall/Pole (100 mm Dia Medium Duty pipe

12 with rubber gland at both ends to avoid cable damages). This includes Mtrs. 415.00 403 167037.5 415.00 230 95450

providing and fixing of M.S clamp at every 1 Mtr.(As per Directive of EIC)

Supply and installation of any clamps made from 50x6 mm GI flat for

13 fiiting100 mm dia medium class GI pipe/any other pipes above ground with Pair 332.00 115 38180 332.00 35 11454

Supply, Installation, Testing, Commissioning of Half Round pipe(1000mm

Length, 6 inch dia, 1 inch thick)

PRE BONDING TAP: For laying on trench after laying cable on trech to

15 provide indication cable route below land surface in underground trench to Mtrs. 10068.00 17 173673 10068.00 6 57891

protect cable for mechnical injuries.

CABLE TERMINAL FERRULS: The PVC Cable terminal ferruls for

identification of phase sequence and feeder/PSS/FSP name of HT/LT

16 cables shall be provided at every termination of all cables stating detail as Nos 174.00 28 4802.4 174.00 9 1600.8

under. HT Cable :Feeder name/Phase(R/Y/B) LT Cable : TC/FSP

name/Phase(R/Y/B/N)

CABLE TAG: The PVC tag for identification of feeder/PSS/FSP/RMU name

of HT/LT cables shall be provided at every 150 MTR

HT Feeder: Substation/Feeder LT Feeder

: PSS/Transformer/FSP

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

EARTHING PIT : Supplying & erecting earth pit of minimum bore dia.

mm size approved make safe Earthing Electrode consisting Pipe in pipe

Technology as per IS 3043-1987 made of corrosion free G.I. Pipes having

Outer pipe dia of 50 mm having 80-200 Micron galvanising connections,

18 terminal dia. of 12 mm with constant ohmic value surrounded by highly Nos. 257.00 7475 1921075 257.00 1150 295550

conductive compound with high charge dissipation with civil works of

earthing chamber. For Electrical installation covering Transformer neutrals,

HT & LT switchgears for independent earthing in normal soil, Length of Pipe

3 mtrs. Backfilling compound 2 bags of 25 Kg each.

Supply installation & commissioning of earthing conductor 38 x 3 G.I. strip

19 for pole mounted transformer and RMU Etc as well as connection to be Mtrs. 771.00 159 122357.7 771.00 60 46105.8

made to the earth pit. Rates inclusive of hot dipped hardwares.

Obtaining statutory approval from Electrical Inspector for installation

21 DISMENTALLING:

Dismentalling of pole mounted transformer,stacking the same after

transporting to discom store without any damage as and where condition.

b Above 500 KVA Nos. 0.00 4025 0

Dismentallling RCC/Rail pole with cross arm,insulators,hardwares,stay,

22 etc.and return it to discom store.While dismentalling utmost care shall be Nos. 210.00 155 32602.5

taken so that the material so that the same can be reused by discom.

Dismentalling of AAAC/ACSR/ABC/ Earth wire any size of conductor & line

23 material & after making coil and stacking the same at discom store.Routte Km. 8.39 2300 19297

Dismentalling of any type of service connection from the site and material

return to DISCOM store as per directive of EIC

CABLE ROUTE MARKER: Providing and erecting RCC cable route marker

25 as per drawing duly marked with "DANGER" mark, "discom POWER Nos 101.00 345.00 34845 101.00 115.00 11615

CABLE" and arrow of route of cable.

DRAWING: Preparing complete drawing of entire network as well as

individual feeder map showing joints also in AutoCad and providing the

same to PGVCL in AutoCad copy as ell as pdf copy and hard copy in six

sets. The drawing should be geographical indicating all directions

FENCING: FRP Fencing for RMU and PSS, post shall be made out of FRP

Pultruded hollow section of size 50x50x5mm.. and shall be grouted in the

ground with c. c. of ratio 1:3:6., Sub frame provided using hollow FRP

a section 50x25x5mm or FRP angles 50x50x5 at top and bottom and other RMT 1131.00 4,012.58 4538227.98 1131.00 794.8225 898944.2475

accessories for fixing of gates etc. Rails shall be made out of FRP notch

bars of 12mm dia, Pickets shall be made of flats of size 35x5mm SMC or

FRP as per specifications and Drawing NO: discom/R&D/Fencing/FRP/001

DTC: Fixing of DTC meter at all Transformers Center in such manner that

28 meter reading may be taken easily without obstruction due to fencing of Nos 83.00 1265 104995

RMU (excluding Meter/Meter Box/Cable)

Paint Pointed Letter 2 inch size(Marking on RMU, Transformer, In any

palce.(As per directive of Engineer Incharge) with supply of color

30 Insulation Resistance Tester for Cable testing 10KVA-SDN wise Nos. 8050 0

Total HT-UG (Supply+ Erection) 29743732 10665432

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

SCHEDULE-B2: CONVERSION OF OVERHEAD TO UNDERGROUND LT ELECTRICAL NETWORK

Providing & erecting XLPE(IS:7098) (I)-88 ISI marked multistrand Aluminium

conductor armoured cable ,sand for 1.1 kV to be laid on pole or in existing

cable trence/pipe at road crossing of following size of cables. Work carried

1 out up to consumer premises with meter shifting, and provide load side

cable as per site conditions and as per EIC. For consumer premises DWC

pipe should be provieded(With Excavation, back filling and sand as per

technical specification)

LT CABLE TERMINATION: Cable termination on FSP,LT Distribution

Transformer Box,MSP/SFU /Busbar etc of pole mounted transformer of LT

cable grade as specified below including cutting,stripping of

cable,insulations,providing compression type terminals,suitable cable

glands,crimping lugs with necessary connections.Work carried out up to

consumer premises with meter shifting, and provide load side cable as per

site conditions and as per EIC. For consumer premises DWC pipe should be

3 Lying of all types of cable in trench(without Excavation) Mtrs. 25524.00 173 4402890

4 Lying of cable on pole Mtrs. 651.60 44 28474.92

5 Lying of the cable in the Pipe(Without Excavation) 255.24 58 14676.3

6 Drilling work in Road Crossing through push through Mtrs. 3258.00 569 1854616.5

Drilling work in Road/ASPH/RCC /Hard Rock Etc(Excavation with back

filling as per the specification of cable lying)

8 Supply, intstallation of the DWC pipe(Without Excavation)

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Lt cable saddling works: Direct cable saddleing with wall and etc for this

work GI type saddle and nail shall be used.

Supply, Installation, Testing, Commissioning of Half Round pipe(1000mm

Length, 4 inch dia, 1 inch thick)

PRE BONDING TAP: For laying on trench after laying cable on trech to

11 provide indication cable route below land surface in underground trench to Mtrs. 52128.00 17 899208 52128.00 6 299736

protect cable for mechnical injuries.

CABLE TERMINAL FERRULS: The PVC Cable terminal ferruls for

identification of phase sequence and feeder/PSS/FSP name of HT/LT

12 cables shall be provided at every termination of all cables stating detail as Nos 4672.00 28 128947.2 4672.00 9 42982.4

under. HT Cable :Feeder name/Phase(R/Y/B) LT Cable : TC/FSP

name/Phase(R/Y/B/N)

CABLE TAG: The PVC tag for identification of feeder/PSS/FSP/RMU

13 name of HT/LT cables shall be provided at every 30 MTR Nos. 8508.00 28 234820.8 8508.00 9 78273.6

HT Feeder: Substation/Feeder LT

Feeder : PSS/Transformer/FSP

EARTHING PIT : Supplying & erecting earth pit of minimum bore dia.

mm size approved make safe Earthing Electrode consisting Pipe in pipe

Technology as per IS 3043-1987 made of corrosion free G.I. Pipes having

Outer pipe dia of 50 mm having 80-200 Micron galvanising connections,

14 terminal dia of 12 mm with constant ohmic value surrounded by highly Nos. 1168.00 7475 8730800 1168.00 1150 1343200

conductive compound with high charge dissipation with civil works of

earthing chamber. For Electrical installation covering Transformer

neutrals,HT & LT switchgears for independent earthing in normal soil,

Length of Pipe 3 mtrs.Backfilling compound 2 bags of 25 Kg each.

Supply installation & commissioning of earthing conductor 38 x 3 G.I. strip

for pole mounted transformer and upto FSP,RMU,MSP,SFU, Busbar Etc as

well as connection to be made to the earth pit. Rates inclusive of hot dipped

Obtaining statutory approval from Electrical Inspector for installation

17 DISMENTALLING:

Dismentallling RCC/Rail pole with cross arm,insulators,hardwares,stay,

a etc.and return it to discom store.While dismentalling utmost care shall be Nos. 840.00 155 130410

taken so that the material so that the same can be reused by discom.

Dismentalling of AAAC/ACSR/ABC/ Earth wire any size of conductor & line

b material & after making coil and stacking the same at discom store.Routte Km. 33.57 2300 77211

Dismentalling of any type of service connection from the site and material

return to DISCOM store as per directive of EIC

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

FSP (FUSE SECTION PILLER): 4 Way

Supplying and erecting 120x100x40 cms. Fuse section pillar fabricated from

4 mm Thermosetting Plastic ( moulded in a single piece ) i.e Glass

Reinforced Polyester sheet Moulding Compound (SMC ) or metal body(As

per Specification and drawings) with cable clamps to be burried in ground to

have appropriate erection on look unifrom unit erected with cement concrete

foundation and 45 cms high brick masonry internal supported on both side

i with intrnal and outer side locking arrangement with lock and keys in

duplicate .Incoming switchgear SFU of TPN and outgoing HRC SMC fuse

base and knife type links 32 Amp to 630 Amp capacity fuse base fitted on

630 Amp current capacity copper Busbar with RYB colour coding and

insulated strip with all internal connections and entry for incomming up to

core 300 sq mm 4 nos and outgoing 3 nos. 31/2 core cables of suitable

sizes. (As per Technical specification of FSP ) (Erection shall be carried out

as per approved drawing and site condition) (SFU Amp Capcity is as under)

FSP (FUSE SECTION PILLER): 6 Way

Supplying and erecting 120x100x40 cms.Fuse section pillar fabricated from

4 mm Thermosetting Plastic ( moulded in a single piece ) i.e Glass

Reinforced Polyester sheet Moulding Compound (SMC ) or metal body(As

per Specification and drawings) with cable clamps to be burried in ground to

have appropriate erection on look unifrom unit erected with cement concrete

foundation and 45 cms high brick masonry internal supported on both side

ii with intrnal and outer side locking arrangement with lock and keys in

duplicate .Incoming switchgear SFU of TPN and outgoing HRC SMC fuse

base and knife type links 32 Amp to 630 Amp capacity fuse base fitted on

630 Amp current capacity copper Busbar with RYB colour coding and

insulated strip with all internal connections and entry for incomming 1 core

300 sq mm 4 nos and outgoing 5 nos. 31/2 core cables of suitable sizes.

(As per Technical specification of FSP ) (Erection shall be carried out as per

approved drawing and site condition)(SFU Amp Capcity is as under)

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

MSP(Mini Section Piller) : 4 Way

Supplying and erecting 120x100x40 cms. Mini section pillar

fabricated from 4 mm thick Thermosetting Plastic(moulded in a single

piece) i.e. Glass Reinforced Polyester Sheet Moulding Compound

(SMC) or Metal Body Type Enclouser(As per Specification) with cable

clamps to be burried in ground to have appropriate erection on look

uniform unit erected with cement concrete foundation and 45 cms

high brick masonary internal supported on both side with internal and

outer side locking arrangement with lock and keys in duplicate.

Incoming HRC SMC fuse base and kinfe type links 32 Amp to

Amp. capacity, fuse base fitted on 250 Amp. current capacity copper

Busbar with RYB colour coding and insulated strip with all internal

connections and entry for incoming up to 3.5 Core 300 Sq.mm 1 Nos.

and outgoing 3 nos. 3.5 core cables of suitable sizes.( As per

Technical specification of MSP)

MSP(Mini Section Piller) : 6 Way

Supplying and erecting 120x100x40 cms. Mini section pillar

fabricated from 4 mm thick Thermosetting Plastic(moulded in a single

piece) i.e. Glass Reinforced Polyester Sheet Moulding Compound

(SMC) or Metal Body Type Enclouser(As per Specification) with cable

clamps to be burried in ground to have appropriate erection on look

uniform unit erected with cement concrete foundation and 45 cms

high brick masonary internal supported on both side with internal and

outer side locking arrangement with lock and keys in duplicate.

Incoming HRC SMC fuse base and kinfe type links 32 Amp to

Amp. capacity, fuse base fitted on 250 Amp. current capacity copper

Busbar with RYB colour coding and insulated strip with all internal

connections and entry for incoming up to 3.5 Core 300 Sq.mm 1 Nos.

and outgoing 5 nos. 3.5 core cables of suitable sizes.( As per

Technical specification of MSP)

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

MSP(Mini Section Piller) : 8 Way

Supplying and erecting 120x100x40 cms. Mini section pillar

fabricated from 4 mm thick Thermosetting Plastic(moulded in a single

piece) i.e. Glass Reinforced Polyester Sheet Moulding Compound

(SMC) with cable clamps to be burried in ground to have appropriate

erection on look uniform unit erected with cement concrete foundation

and 45 cms high brick masonary internal supported on both side with

iii internal and outer side locking arrangement with lock and keys in

duplicate. Incoming HRC SMC fuse base and kinfe type links 32 Amp

to 250 Amp. capacity, fuse base fitted on 250 Amp. current capacity

copper Busbar with RYB colour coding and insulated strip with all

internal connections and entry for incoming up to 3.5 Core

Sq.mm 1 Nos. and outgoing 7 nos. 3.5 core cables of suitable sizes.(

As per Technical specification of MSP)

Supply, Instalation, Testing, Commissioning switch fuse unit made by

SMC Box and capacity of 125 A, Mostaly used in flat/Socity area.

20 Installation worked caried out with instruction of EIC. And as per the Nos. 174.00 12087 2103051 174.00 1150 200100

drawing approved by CA- Minimum 16 Nos. of CKT

SFU: Supply, Instalation, Testing, Commissioning switch fuse unit

made by SMC box and capacity of 200 A, Mostaly used in flat area.

21 Installation worked caried out with instruction of EIC. And as per the Nos. 50.00 18400 920000 50.00 1150 57500

drawing approved by CA - Minimum 16 Nos. Of Circuit

SFU: Supply, Instalation, Testing, Commissioning switch fuse unit

made by SMC box and capacity of 400 A, Mostaly used in flat area.

22 Installation worked caried out with instruction of EIC. And as per the Nos. 25.00 20700 517500 25.00 1323 33062.5

drawing approved by CA- Minimum 16 Nos. Of Circuit

CABLE ROUTE MARKER: Providing and erecting RCC cable route marker

23 as per drawing duly marked with "DANGER" mark, "discom POWER Nos 527.40 345.00 181953 527.40 115.00 60651

CABLE" and arrow of route of cable.

DRAWING: Preparing complete drawing of entire network as well as

individual feeder map showing joints also in AutoCad and providing the

same to PGVCL in AutoCad copy as ell as pdf copy and hard copy in six

sets. The drawing should be geographical indicating all directions

FENCING: FRP Fencing for FSP/MSP/SFU/BUSBAR, post shall be

made out of FRP Pultruded hollow section of size 50x50x5mm.. and

shall be grouted in the ground with c. c. of ratio 1:3:6., Sub frame

a provided using hollow FRP section 50x25x5mm or FRP angles 50x50x5 RMT 29.00 4,012.58 116364.82 29.00 795.225 23061.525

at top and bottom and other accessories for fixing of gates etc. Rails

shall be made out of FRP notch bars of 12mm dia, Pickets shall be

made of flats of size 35x5mm SMC or FRP as per specifications

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Paint Pointed Letter 2 inch size(Marking on FSP, MSP, SFU Etc In any

palce.(As per directive of Engineer Incharge) with supply of color

27 HRC Fuse and its Fuse base(Spare)

28 Jointing Kit for LT Cable

Total LT-UG (Supply+ Erection) 136768176 24848459