Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹88.6 LAccepted-AOC KARUKAPPILLY THATTATHUKUDIYIL BUILDING KOLENCHERY 682311 | KOLENCHERY | ERNAKULAM | KERALA | 682311 | 1 | Accepted-AOC L1 | |
| 2 | 2₹89.0 L+₹42,738.53 (0.48%)Rejected-AOC CHAKKALAKKAL H KOTTAT P O | 2 | Rejected-AOC L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical EMD RELEASE | |
| 4 | Rejected-Technical | - | Rejected-Technical EMD RELEASE | |
| 5 | Rejected-Technical | - | Rejected-Technical EMD RELEASE |
Tender Value
₹1.1 Cr
EMD Value
₹50,000
Closing Date
26 Jul 2021, 5:00 pmClosed
CHIEF ENGINEER, KSCADC
CHIEF ENGINEER KSCADC 1st Floor, Chalachithra Kalabhavan Building, Vazhuthacaud, Jagathy P.O. Thiruvananthapuram Pin-695014
NABARD RIDF XXII- Infrastructure works in Government Fish Farm, Poyya, Thrissur- Electrification
2021_SCADC_430724_1
ET-11/2021-22
Open Tender
Electrical Works
Item Rate
120 days
Poyya
Please refer Tender documents.
6 documents required · 6 mandatory
₹5,950
₹50,000
30 Jan 2023
16 Jul 2021
28 Jul 2021
16 Jul 2021
26 Jul 2021
16 Jul 2021
Amount
Yard lighting
90.15.4.6 : Supply Conveyance, installation, testing and commissioning of 70W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
90.16.1.2 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required
90.15.2.1 : Supply installation testing and commissioning of High Mast using Octogaonal Pole made single/two sections of hot dip galvanised GI sheet 70mm top diameter, 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x16 mm suitable for wind speed as per IS 875 Part III with head frame assembly two point suspension system with steel wire rope 5mm dia double drum winching system w and including round arm galvanized luminary carriage suitable to install 6/8 nos luminaries in symmetrical arrangement control gear box and lighting spikes with single phase operation power tool installed inside the base compartment including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc, complete 8 Meters
90.15.4.9 : Supply Conveyance, installation, testing and commissioning of 150W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
90.12.5.41 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.
5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
9.1.35 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 35 sq. mm (32mm)
90.11.1.10 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required
90.11.1.19 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required
2.2.1 : Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 Amp, 16 KA, TPMCCB
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2.14.2 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door
od295867/2020_2021 : Supply, Installation, testing and commissioning of 40 A to 63 A, TP MCB (C curve), 10 kA breaking capacity
90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required
od297660/2020_2021 : Supply Installation, Testing and commissioning of ANALOG ASTRONOMICAL PRE-WIRED TIMER DB of the following specification. Timelite-16A 3Pole/230V-Analog Time switch. with 3 no of 3P outgoings, all connections and fittings are pre-set and pre-wired at company at the time of manufacturing.<br>Aesthetically appealing with locking facility<br>• IP54 degree of protection<br>• Switch On-Off street lights on time scheduling basis by incorporating an<br>analog/digital time switch and contactor.<br>• Rating of contactor depends on the luminaires and wattage of lighting loads<br>Conforms to IEC 60439
90.16.5.2 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.
90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.
od297695/2020_2021 : Supply installation testing commissioning of Octogaonal/ Conical Pole made of hot dip galvanised GI sheet 70mm top diameter, 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x12mm suitable for wind speed as per IS 875 Part III ring bracket including connector foundation bolt 4 nos fixed in existing RCC foundation and junctions box etc.complete 5 Meters
od300502/2020_2021 : Supply, installation and fixing weather proof box (Removable Lid of size 280 X 180 X 60) in the existing pole with suitable mounting arrangements, also including the din channel for mounting the MCB, four pole cable connector and earth connecting connectors.
2.10.2 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and netural
90.12.5.2 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.
9.1.1 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)
90.12.10.4 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation
90.12.10.2 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation
7.9 : Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
Civil Works associated with Electrifiication
2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
51.2.3 : Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared
CCTV Camera Work
1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable
90.12.10.3 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation
od112/2021_2022 : Supply, laying, erection, testing and commissioning of 12 core single mode armoured fiber cable in the existing HDPE/DWE/Hume Pipe with HDPE sheath, central loose tube with jelly compound, high quality electro chromium coated corrugated steel tape (ECCS) and it is suitable for out door networking system,excellent crush resistant performance, light weight, compact structure and other necessary accessories.
od113/2021_2022 : Supply Installation testing and Commissioning of IR IP PTZ CAMERA with Make: CP Plus, Bosch, Type :Network / IP ,Image sensor: 1/2.8" progressive scan, 2MP CCD/CMOS sensor or better, Lens: 30X Optical Zoom/ 16X Digital Zoom Lens or better, Resolution: HDTV 1920x1080, 2 MP ,Video compression:H.265, H.264, Motion JPEG, Frame rate: H.265 Up to 25 fps (50 Hz) in all resolutions, Video Streaming: Multiple, individually configurable streams in H.265, H.264 and Motion JPEG, Minimum 2 streams in full Resolution , IR LED: Integrated or External Panel, Minimum IR Distance: 200Mtr or better, IR Intensity: Automatically adjustable, depending on the zoom ratio, Minimum Illumination: Color 0.005 lux at F1.6 ; B/W 0.0005 lux @ F 1.6, 0Lux @F 1.6 (IR ON ), Shutter time: 1/1s – 1/30000 s or better, Pan & Patrol: 360° endless. Pan Manual Speed: 0.1°-200°/s, Pan Preset Speed: 300°/s, Prset:256, Upto 16 patrols, up to 32 present per patrol, auto call up of PTZ, , Tilt: 20°- 90° (Auto Flip) 180. Tilt Manual Speed: 0.1°-200°/s, Tilt Preset Speed: 300°/s, Minimum Optical Zoom: 30X or better. Minimum Image settings: All standard image settings like Compression, Color, Brightness, Sharpness, white balance, Exposure control, Exposure zones, BLC, Fine tuning of behaviour at low light, WDR, Text and image overlay, Rotation, 3D DNR, Privacy settings , Supported protocols: IPv4, IPv6, HTTP, HTTPS, TCP, RTSP,RTCP,RTP, ICMP, UDP, IGMP, DNS, DHCP, NTP, SNMP, PPPoE, 802.1X, DDNS, SMTP, ARP, UPnP, FTP, Onvif: Profile S or higher, Intelligent Detection: Face detection, Defocus, People counting, Intrusion Detection, Cross line detection, Motion Detection, People counting. Event actions: File upload FTP, HTTP, network share and email Notification email, HTTP and TCP Video and audio recording to Network storage, Pre- and post-alarm video buffering, On Board Storage: Micro SD Card, Up to 256GB support (ANR Support), Security: Watermark, IP Address Filtering, Access Policy, ARP Protection, RTSP Authentication, User Authentication, Connectors: RJ45 for 10BASE-T/100BASE, Power: DC12V / AC24V, Outdoor Casing & Protection: Mandatory to have IP67 or NEMA 4X-rated casing(aluminium), IK10 Impact Protection, Operating conditions: Temperature -30 °C to 60 °C; Humidity 10-90% RH (Non-condensing), Software Features: Should be able to monitor and manage the uptime status of cameras and associated network accessories remotely. Should have options for managing SLA based on essential uptime status reports, to ensure maximum availability. The option should have following features, To monitor the uptime status of the cameras from locally and remotely. , To monitor Down-UP-reboot-not reachable alert of IP Camera/ Workstation/ Router/ Switch/ NVR, Multilevel escalation of alerts, . Metrics with option to specify threshold, Metrics with option to specify threshold, Multiple preconfigured and customizable dash board view. , Tree structure design with multiple folder drill down option, User configurable folder name to specify Name, location etc.,, Send alert via E-mail / SMS ,Certification: CE, FCC, UL, ROHS with pole mounting kit
od114/2021_2022 : Supply Installation and commissioning of Joystick controller : capable of controlling analog or HD PTZ cameras using a RS485 connection for control, compatible with devices using PELCO-D, and PELCO-P protocols. Joystick controller has to have 3-axis function so that one can zoom PTZ by turning the dial on the neck of the joystick. It should be capable of supporting up to 10 cameras
od116/2021_2022 : Profssional LED Display: Professional grade display with low power consumption using LED and LCD technology . Minimum of 40 inch diagonal display with multiple input and output ports . 40 inch ultra HD display with HDMI and VGA ports for the incomer and outgoing. 24 * 7 operational capability, LCD type with backlight LED technology with display resolution of 1980 * 1080 pix, 2 HDMI input and 1 output, 2 audio input and 1 audio output,and also have VGA input and output port, the display is suitable for all connection cable and wire (network and other)
od117/2021_2022 : Supply, installation and commissioning of Hard disc :Optimized for DVRs and NVRs, surveillance drives are tuned for 24x7 workloads in capacities up to 6TB. Helps to minimize dropped frames and downtime with a workload rating 3x that of a desktop drive and IS ready to record up to 90% of the time while supporting up to 64 HD cameras. The formfactor rang is 3.5", SATA III,with RPM 7200,internal storage HDDwith buffer 256(MB cache)
od118/2021_2022 : 8 port GIGA Switch: 8-port Gigabit Ethernet switch enables home and office users to easily connect and supply power to Power over Ethernet (PoE) devices such as wireless access points (APs), IP cameras, and IP phones. It also provides the opportunity to add additional Ethernet devices like computers, printers, and Network Attached Storage (NAS) onto a network. Also have some additional qualititys like 10/100/1000 Mbps speed Gigabite port switches, auto cross over for all ports, Built in D link Green technology, Plug and play type installation, 12V DC input
od119/2021_2022 : Installation and supporting charges (Labor charges only) of CCTV camera and its items for the next 2 years (After the defect liability period)
od154/2021_2022 : Supply Installation testing and commissioning of 4MP IR IP BULLET CAMERA: with Make: CP Plus, Bosch, Type: Network/IP, Image sensor and Effective Pixels: 1/ 3” or better, CMOS Progressive Scan & Minimum 4 MP or higher, Electronic Shutter: 1 /3 or 1 / 1,00,000 s or better, Focus: Automatic - Remote, Automatic Gain Control: Automatic / Manual, Frame Rate: 25 FPS (50Hz) at 4MP Resolution, Codec: H.265, H.264, MJEPG or better, Minimum Illumination: 0.002 Lux f1.6 (Colour) & 0 Lux IR ON (B/w), Backlight Compensation: Required, Camera should adjust BLC feature automatically depending on the light condition, IR illuminator: Preferred to have intelligent IR LEDs that automatically adjust intensity at angle of illumination. Range to be min 50M, Video Resolution: Main Stream:4MP (2560×1440): Max. 30 fps, Sub Stream: 4MP (2688 X 1520): Max. 20 fps, Third Stream:D1 (720×576): Max. 30 fps (individually configurable), WDR: Yes ≥120dB, Video Streams: Triple Stream, Individually configurable video streams (H.265, H.264, MJPEG), Minimum 2 streams in Full HD Resolution, Intelligent Video: Intrusion Detection, Object Missing, Missing Object, crossing line Detection, Face detection, Defocus, People counting, Audio Detection, Interface: RJ-45 for 10/100 base-T Ethernet, Network Protocols support: IPv4, IPv6, HTTP, HTTPS, TCP, RTSP/RTCP/RTP, ICMP, UDP, IGMP, DNS, DHCP, NTP, PPPoE, 802.1X, DDNS, SMTP, ARP, Network Storage: ANR (Automatic Network Replenishment), Alarm Event :Events / alerts send via FTP, SMTP, HTTP, Pre -Post alarm video buffering., Compliance: ONVIF profile S or better, Security: Watermark, IP Address Filtering, Tampering Alarm, Alarm input, Alarm output, Access Policy, ARP Protection, RTSP Authentication, User Authentication, Alarm Interface: 1 Ch Input / I Ch Output, Audio Interface: 1 Ch Input / I Ch Output, Audio Codec: G.711, Two-way audio , On board Storage: 256GB or Better, Operational Temperature °C: -30°C to 60 °C, Casing: IP67 or better rated housing and Vandal proof rating IK10, Power: PoE IEEE 802.3af class0, DC12V, Software Features: Should be able to monitor and manage the uptime status of cameras and associated network accessories remotely. Should have options for managing SLA based on essential uptime status reports, to ensure maximum availability. The option should have following features, To monitor the uptime status of the cameras from locally and remotely. , To monitor Down-UP-reboot-not reachable alert of IP Camera/ Workstation/ Router/ Switch/ NVR , Multilevel escalation of alerts ,Metrics with option to specify threshold , Tree structure design with multiple folder drill down option., User configurable folder name to specify Name, location etc.,, Send alert via E-mail / SMS , Certifications: CE, FCC, UL, ROHS with pole mounting unit.
od162/2021_2022 : Supply and installation of 9U Network Rack and its necessary accessories.
od185/2021_2022 : Supply, Installation, Testing and Commissioning of Syrotech make media converter with the features like compliant with IEEE 802.3 10 Base -T, IEEE 802.3 u 100 Base-TX, IEEE 802.3ab 1000Base -TX, IEEE 802.3z 1000Base-FX standards. Provide one 10/100/1000 Base- T port with RJ-45 connector, one SFP Slot socket, Full- duplexand half-duplex auto sensed, Support auto MDI/MDI-X function, front panel LED indicator
od195/2021_2022 : Supply, Installation and Commissioning of CAT 6 Patch cord
od196/2021_2022 : Supply, Installation and Commissioning of SM Patch cord
od203/2021_2022 : supply, installation testing and commissioning of 12 port LIU fully loaded
od204/2021_2022 : Fiber optical cable splice tray with box and adapter
od815/2021_2022 : Supply and Installation of NVR: 32 Channel IP camera input, Network video recorder with embedded linux operating system , should support 2 hard disc slot and each should support 10TB hard disc, Third- party network cameras supported and up to 12 Megapixels resolution preview and play back, support 1-ch VGA, 1-ch HDMI, HMDI at up to 4K (3840 X 2160) resolution, 4-ch network cameras can be connected with 160 Mbps incoming bandwidth, Support H.265/H.264/MPEG4 video formats
od916/2021_2022 : supply, installation testing and commissioning of single module OFC module
od917/2021_2022 : Supply, installation, testing and commissioning of sg 300 1010 sfp
od970/2021_2022 : Supply installation testing and commissioning of sintex box of size 400 X 400 or higher
BIJU JOSE
Delstar a Grade Electrical contractors
MAS ELECTRICALS
N.SIVA PRASAD
Biju E.M
INDO TECH
Linsta Services
Bidder Name
INDO TECH
Biju E.M
Linsta Services
Delstar a Grade Electrical contractors
BIJU JOSE
N.SIVA PRASAD
Power Care Electrical
MAS ELECTRICALS
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_611327.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .