REPAIR AND CLEANING TO SEWAGE LINES, MANHOLES, SEPTIC TANKS, DRAINAGE, HARDSTANDING, BOUNDARY WALL, FENCING ETC IN TECH AREA AT AF STN JAMNAGAR

Amount

Desludging & cleaning of manholes depth not exc 1.0m of any size & shape by removing all sludge/waste etc from the manholes and finally cleaning with fresh water including disposing of all sludge/waste etc outside MOD land (complaint slip shall be collected by the rep of contractor from complaint cell daily as directed)

Desludging & cleaning of manholes depth exc 1 mtr and n.exc 2 mtr of any size & shape by removing all sludge/waste etc from the manholes and finally cleaning with fresh water including disposing of all sludge/waste etc outside MOD land (complaint slip shall be collected by the rep of contractor from complaint cell daily as directed)

Cleaning & desludging of septic tanks of capacity 10 to 25 users by pumping out sewage & sludge & disposing all waste including liquid in covered tanks outside MOD land and finally cleaning & washing with fresh water complete all as specified & directed by Eng-in-Charge.

Cleaning & desludging of sockage well of capacity 2.5m dia and 3m depth by pumping out sewage & sludge & disposing all waste including liquid in covered tanks outside MOD land and finally cleaning & washing with fresh water complete all as specified & directed by Eng-in-Charge.

Cleaning of gully traps, WHB, Floor trap, nahani traps etc any type of floor position by removing all sludge/waste etc including cleaning of connected pipe upto gully trap to remove blockage, and finally washing with clean water including disposing of all sludge/waste etc outside MOD land.

Cleaning of blockage from WC/EWC/Urinal at any type of floor by removing all sludge/waste etc including cleaning of connected pipe upto first manhole to remove blockage, and finally washing with clean water including disposing of all sludge/waste etc outside MOD land.

Cleaning of sewage lines 100/150/200 mm dia from manhole to manhole by manual / mechanical rodding, removing all sludge/waste and making the line functional incl disposing of all sludge/waste etc outside MOD land.

Cleaning of PCC / stone masonry / brick masonry drains not exceeding 1.5 metre deep by removing of deposited soft / loose soil and other foreign materials not exc 30 cm deep and average 15 cm deep and removal of excavated material to a distance exc 1 km but n.exc 2 km complete all as specified and directed by Engineer-in-charge Note:- width of bottom of drain multiplied by the length of drain cleaned shall be measured for payment.

Excavating in trenches, Demolition and breaking up 150/200 mm dia pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar, including demolition and breaking of PCC bed, packing under and haunching against the sides, in trenches, removal of debris out side MOD land returning and filling of soil (after supply and laying of new drain pipe, hunching, packing under complete) all as specified and directed. Note : supply and laying of new drain pipe, beddin, hunching, packing under shall be measured and paid for separately under respective item Nos 10 to 13 here in after.

S&F 150 mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars

S&F 200 mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars

M&L for cement concrete 1:4:8 type D2 (using 40mm graded aggregate) bed to drain pipes including packing under and haunching against the sides of pipes 150mm dia bore after they are laid and tested

M&L for cement concrete 1:4:8 type D2 (using 40mm graded aggregate) bed to drain pipes including packing under and haunching against the sides of pipes 200mm dia bore after they are laid and tested

S&F in repair Vitreous China half stall urinals, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including supply and fixing in repairs 10 litres automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe; Also including supply and fixing in repairs of waste coupling of PTMT minimu weight 32-45gm. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe).

S&F in repair Vitreous china wash basin, white flat back , size 550x400mm with padestal excluding taps, waste pipe but including waste cupling of PTMT of 32mm bore dia incl brackets etc all as specified.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests and P or S trap (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.complete; including supply & fixing bolts, P or S trap, and Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete and finishing the pan surface in contact with floor / wall with white cement.

S&F in repairs Toilet paper holder, vitreous China, box type, coloured, fixed to walls with & including chromium plated (CP) brass screws

S&F in repairs Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4).

S&F in repairs PVC (SWR) floor trap, 75mm dia, plain with grating including jointing with solvent cement

S&F in repairs 75mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, jointed with solvents, laid in trenches or in floors.

S&F in repairs 75mm bore PVC (SWR) bends any radius.

S&F in repairs 110mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, jointed with solvents, laid in trenches or in floors.

S&F in repairs 110mm bore PVC (SWR) bends any radius.

S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms).

S&F in repairs 15mm dia bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe.

S&F in repairs Plastic water closet seat, any colour as directed, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

S&F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm

S&F in repairs 15mm Bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule

S&F in repairs 15mm Bib taps, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule

S&F in repairs 15mm Stop valves, cast copper alloy,fancy type, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.

S&F in repairs 15mm Angle Stop valves, cast copper alloy,fancy type, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.

S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

S&F in repairs aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Demolition of concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removal of debris out of MoD land.

M&L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc

M&L for rubber moulded chequered cement concrete tile with grey cement and pigment (of approved tint) of size 300 mm x 300 mm x 25 mm thick over and including 15mm thick screed bed in CM 1:6, set jointed and pointed in neat cement slurry complete

M&L for cement concrete type B- 1, 1:2:4 (20mm graded aggregate) as in road / hardstanding of thickness 150 mm including steel formwork and finishing the surface using floater etc complete all as directed.

M&L for Forming contraction joints (Dummy) in concrete pavement, 30 mm deep x 10 mm wide priming & filled with sealing compound Grade 'A' all as specified and as directed.

Demolition of floor, hearth or wall tiling or stone slab laid , bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debris outside MOD land.

M&L for Non - skid joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer of cement mortar 1:6, 15 mm thick

M&L glazed ceramic tiles in veticle surfaces 300mmx200mmx7mm thick set and joint in neat cement slurry over and including 10mm thick plastering in CM 1:4 and pointed in white or colour cement to match.

Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc.including removal of debris outside MOD land.

M&L for sand cushioning 25mm thick over concrete surfaces, spread all as specified.

M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 60mm thickness, with minimum compressive strength of 35N/sqm (M-35), without correction factor for chamfering, made in rubber moulds with 0.50mm thick scratch proof lacquer coating on top surface, with grey cement and pigment laid complete

M&L for Filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc. exc. 25 but n.exc 50 sq.cm.

Demolition of brickwork or stone/ boulder masonry / PCC block masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Cement concrete type D-2 1:4:8 using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified

M&L for cement concrete Type C2 (1:3:6) (20mm graded aggregate) in surface channels and drains

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement motar 1:4

M&L for pre-cast cement concrete block masonry 1:5:8 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc including removal of debris outside MOD land.

M&L for rendering 5 mm thick in cement mortar 1:4 (as second layer) over and including 10 mm thick rendering in cement mortar 1:6 ( as first layer) on fair faces of brick work or concrete surfaces, including mixing only water proofing compound in second coat as per manufacturer's instruction. Note:- Water proofing compound will be measured and paid seperately

Supply only liquid water proofing compound

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement

M&L for cement concrete 1:2:4 type B1 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

M&L for forming fair finished drains or channels 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred / stopped ends etc.

Demolition of reinforced cement Concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for

M&L for providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces Set in cement mortar 1:6. Note:- reinforcement steel will be measured and paid seperately.

M&L for Mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F mild steel angle iron and flats including embedding in concrete and screwing etc. including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

S&F in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

S&F in repairs galvanized concertina coil of 750mm dia made of 0.5mm thick, 19mm wide strip & 2.59 mm dia high tensile wire, 125 Nos of clips, having 56 Nos of circles and covering 8 to 10 running mtr and 'S' clips per spiral using a central core of high tensile wire around which a tape of razor sharp barbs is machine crimped etc all as specified.

Taking down chain link fencing of any mesh size/any type incl. link wire to any type of standard rails/ supports etc & straining bolt etc incl. binding wire complete all as specified.

Fixing only chain link fencing of any mesh size/any type incl. link wire to any type of standard rails/ supports etc & straining bolt etc incl. provision of binding wire complete all as specified.

Supply for Chain link MS galvanisd fencing, any size or type, etc complete all as specified and as directed.

M&L mild steel round bar 10 mm and over as in tightening of chain link fencing including cutting to shape, necessary drilling, bolting etc Fe-410-W (Gde E-250) quality -A or Fe 290 (Gde-E-165) complete all as specicifed and directed.

S&F mild steel bands, straps, supports or stays for rainwater pipes, soil/ waste or vent pipes including bolts, if required, in hold fast; wall ties; hooks for hanging fans and similar small article confg to Fe- 290-Gde - E-165 complete all as specicifed and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 but n exc 10 cm long,Diameter of neck in 16 to 20 mm, etc complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

M&L for preparation of old decorated steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint

M&L for preparation of new steel surfaces n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Taking down 15mm bore steel tubing and connections in any position,Complete all as specified and directed by Engr-in-charge.

Taking down 20mm bore steel tubing and connections in any position,Complete all as specified and directed by Engr-in-charge.

S&F GI tube 15mm dia midium grade with all fitings to wall, celing or laying in trenches.

S&F GI tube 20mmdia medium grade galvanised, with all fitting and fixed to walls and ceilings or laid in floors all as specified.

S&F in repair waste Pipe (32/40mmdia) suitable for urinals,Wash Basin and Sinks complete all as apecified and as directed.

S&F in repair hand shower (Health Faucet) CP with inner flexible tube with wall hook complete all as specified and as directed. (Model No ALD-CHR-593 of Make Jaquar or equivalent model of Marc/Kohlar/ makes given in particular specifications).

sanu enterprise

M/s Punnsons India

Sukhi Electricals

Honest builders

JAMNAGAR ELECTRIC AND MACHINERY CO

Indice Technologies

suvidhiconstruction