Loading
Loading…
Loading…
Tender Value
₹1.5 L
EMD Value
₹2,954
Closing Date
28 Sept 2026, 6:00 pm5d left
EE (CIVIL)
BSNL CIVIL DIVISION KANNUR
Construction of RCC platform and steel sheet roofing for GSM BTS at KANNADIPARAMBA RTT site
2026_BSNL_291649_1
18/NIT/EE-KNR/2026-27
Open Tender
Civil Works
Item Rate
30 days
Kannadiparamba
2 documents required · 2 mandatory
₹590
Accounts Officer (Cash), BSNL, Kannur.
₹2,954
22 Sept 2026
22 Sept 2026
30 Sept 2026
22 Sept 2026
28 Sept 2026
22 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, taircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). | 1.91 | Cum | - | - |
| 2Centering and shuttering including strutting, propping etc. and removal of form for : | |||||
| 2.1 | Suspended floors, roofs, landings, balconies and access platform | 11 | Sqm | - | - |
| 2.2 | Edges of slabs and breaks in floors and walls - Under
20 cm wide | 14 | Mtr | - | - |
| 3 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo- Mechanically Treated bars of grade Fe-500D or more. | 191 | Kg | - | - |
| 4 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). | 13 | Sqm | - | - |
| 5Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | |||||
| 5.1 | Hot finished welded type tubes | 240 | Kg | - | - |
| 6 | Providing and fixing prepainted Aluminium - Zinc alloy coated steel (colour coated Galvalume) /precoated galvanized iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in- charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required | 30 | Sqm | - | - |
| 7Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.93 MB
NITKannadiparamba.pdf
Tender Documents • 0.91 MB
BOQ_340101.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .