Providing and fixing of Aluminum grill with frame to balconies and other miscellaneous works

Amount

Providing and fixing Powder coated (minimum thickness of powder coating 50 micron) aluminium frame work for windows, balcony, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.

Providing and fixing of Aluminium Powder coated grill (minimum thickness of powder coating 50 micron) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

Demolition of the Plain Cement Concrete Hydraualically/manually with chisels at all floors / locations (upto a height of 25m ) including giving necessary temporary supports and disposing off the debris within a lead of 150m, complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-charge

Synthetic Enamel painting in two or more coats using 1st quality SE paint- Apcolite Synthetic Enamel of M/s Asian paints, or Luxol Hi -Gloss Synthetic Enamel of M/s Berger Paints or approved equivalent make and shade over wood/steel /concrete/road kerb stones surfaces of internal areas at all floors heights and locations (upto a max height of 25 m) including filling up small cracks and crevices with approved filling compound, cleaning, washing, removing the dust, dirt, scales, grease, oil marks, loose painting thoroughly, sand papering wire brushing if necessary, complete with cost of materials, labour, scaffolding, tools and plants all as per specifications and directions of Engineer-in-charge.

Plain cement concrete (P C C ) of grade1:2:4 /M15 (1cement: 2 sand: 4 aggregate) using 20mm size stone aggregate at all floors levels and locations (upto a height of 25m ) including cost of mixing, consolidating, curing and finishing the top surface etc., complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge

Brick work in cement mortar 1:6 (1 cement :6 sand ) in super structure for walls and brick bat coba in C.M 1:6 at all levels, floors and locations (upto a height of 25m ) using best quality conventional kiln burnt light weight bricks of class designation 3.5 N/mm 2 including raking out joints, scaffolding, curing etc., complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-Charge..

20mm thick cement plastering in two coats consisting of 1st coat of 15mm thick in CM 1:4 and 2nd coat of 5 mm thick in CM 1:4 over the brick/concrete wall surfaces in superstructure upto a height of 25m including raking out joints, scaffolding, curing, adding of SBR (which will be supplied at free of cost) as per manufacturers instructions where ever repair works are involved etc., complete with cost of materials, labour, tools & plants all as per specifications and directions of Engineer-in-charge.

Painting with first quality exterior emulsion paint of 100% Acrylic based of APEX of M/s Asian Paints or Weather Coat Smooth of M/s Berger Paints or approved equivalent make and shade without primer of approved shade on the sand face plaster surfaces (new or painted) at all floors heights and locations (upto a maximum height of 30 m) including filling up the small cracks and crevices, with approved filling compound, cleaning ,washing, removing the dust, dirt, scales, grease, oil marks, loose painting thoroughly sand papering, wire brushing if necessary, complete with cost of material, labour, scaffolding, tools & plants etc., all as per specifications and directions of Engineer-in-Incharge.

General Notes: 1. Contractor shall inspect the site to acquaint with the site conditions at AMD 16 residential flats,Begumpet. 2. All the dismantled/ demolished materials shall be dumped at one place as decided by the department within the lead of 150.0mtr. 3. All the samples of materials which are to incorporated in the work shall be got approved by the Engineer -In- charge well in advance. 4. It is the responsibility of the contractor to handover the dismantled items to Dept. At site. Contractor shall be held responsible for any shortage/ missing of dismantled items untill handing over the same to dept.stroes. 5. The contractor is required to pay his employees / labour as per the prevailing minimum wages approved by State/ Central Govt. 6. Contractor shall quote rates for all items after considering cost of materials and labour components and all such conditions leads, lifts, safety precautions, security restrictions that are necessary for satisfactory completion of work as per instructions and site conditions. Security regulations shall be followed.

7. The rates quoted shall include cost of all tools and tackles, manpower including wages, liveries, all wastages and GST,water charges,Labour cess seignorage charges etc. as applicable but exclusive of EPF and ESI. EPF and ESI are reimbursable as per relevant clause on production of proof of payment as per CPWD norms. 8.The contractor has to follow all safety rules of the department and all safety equipments, PPE shall be provided to all workers engaged by him. 9. The contractor shall use only river sand confirming to IS 383 for all cement works involved in the scope of work. 10. All the flats of apartments are occupied by employees of AMD. Therefore, contractor has to execute the work as per the convenient timings of occupants and with least/no disturbance to the residents.