Providing & fixing of Fire Safety System work for division office campus, store campus and construction of 50000 capacity UG Water tank at Bhiloda division Campus, Bhiloda

NAME OF WORK:- Providing & fixing of Fire Safety System work for division office campus, store campus and construction of

50000 capacity UG Water tank at Bhiloda division Campus, Bhiloda

No Description of Item Qty Rate Unit Amount

Excavation for foundation upto 1.50 mtr. Depth including

sorting out & stacking of useful materials & disposing off the 115.00 155.52 CMT

excavated stuff upto 50 meter lead. b) Dense Or Hard Soil

2 Excavation for foundation for depth from 1.5 Mt to 3 Mt.

depth including sorting out and stacking of useful materials

and disposing of the excavated stuff upto 50Mt. lead. b)

Dense Or Hard Soil

Providing & laying Cement concrete 1:4:8 ( 1 cement

:4Coarse sand : 8 hand broken stone aggregate

40mm.nominal size ) and curing complete excluding cost of

form work in (A) Foundation & Plinth

4 Filling available excavated earth ( excluding Rock ) in

trnches, plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each deposited

layer by ramming & watering.

Providing & Laying ordinary cement concrete M-250 and

curing complete including the cost of form work and

excluding reinforcement for reinforced concrete work in

(A) Foundations, footings of columns and mass concrete

Providing and laying ordinary cement concrete M-250 and

finishing smooth with curing etc. complete including the

cost of form work but excluding the cost of reinforcement

for R.C.C work in : (B) Walls upto floor two level

Providing and laying ordinary cement concrete M-250 and

finishing smooth with curing etc. complete including the

cost of form work but excluding the cost of reinforcement 6.00 6,703.30 CMT

for R.C.C work in :4) Slabs having more than 13 cm. and up

to 15 cm. Thickness. ( Upto floor two level )

8 Providing thermo mechanically treated bars ( TMT BARS )

confirming to IS 1786 / FE 500D for R.C.C. works including

bendings, binding & placing in position complete upto floor

Providing 20mm. Thick double coat mala cement plaster on

interior brick / concrate work for plastering comprising of

base coat of 12mm thick cement plaster in (i) Cement

mortar 1:4 ( 1 cement :4 coarse sand)in rough finishing and 150.00 281.51 SMT

8mm thick top coat of cement mortar 1:2 (1 cement :2

coarse sand) finished with trovel incl. scafolding, curing etc

complete. (up to floor two level)

Providing cement vata ( 10x10 CM ) Size quarter round in

cement mnortar (1:1) including neat cement finishing.)

No Description of Item Qty Rate Unit Amount

Providing and laying cement concrete flooring 1:2:4 (

cement : 2 coarse sand : 4 graded stone aggregate 20 mm.

Nominal size) laid in one layer finished with a floating coat

of neat cement. ( 40 mm thick IPS flooring )

Providing and fixing approved quality to wall, ceiling, floor &

trenches galvanized mild steel tubes (medium grade) of the

following nominal bore tube fitting and clamps including

making good the wall, ceiling & floor 50 mm dia.

13 Providing & Fixing gun metal check or non return full way

wheel valve - 50 mm dia

14 Providing and fixing C. I. manhole cover 500 x 700 mm size

etc complete as directed by EIC.

15 Providing & fixing submersible pump having 1.00 HP motor

of ISI brand with all G.I. fittings for inlet & outlet connection 1.00 8,800.00 No.

etc complete as directed.

Supplying and lowering the "Kirloskar/Lubi or its equivalent

make" approved ISI submersible pump for 7.5HP/8 stage in

bore well etc. comp. as directed including ISI approved MEI

type oil immersed auto transformer starter commissioning

and testing to required delivery head (all other accessories

will be paid separately.)

Making connection of galvanised mild steel distribution

branch with galvanised Mild galvansised Mild stell main

mm. To 80 mm. Nominal bore by providing and fixing too

included cutting and threading the pipes complete.

18 Providing & applying Dr.fixit( pidilite)LW+ OR equivalent, In

RCC Work using 200ml per bag as directed & instructed by 71.00 85.80 Litre

Providing & laying coloured glazed tiles 6mm. Thick in

flooring, treads of steps & landing laid on a bed of 12mm.

Thick cement mortar (1:3) (1 cement : 3 coarse sand

finished with flush pointing in white cement.

20 Providing & laying coloured glazed tiles 6mm thick in

skirting, risers of steps & dedo on 10mm thick cement

plaster 1:3 (1 cement : 3 coarse sand) and jointed with

white cement slurry.

Providing formwork of ordinary timber planking so as to give

a rough finish including centering shuttering strutting and

propping etc. Height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal 11.00 180.05 SMT

of the same for in situ reinforced concrete and plain

concrete work in. (A) Foundations Footings Bases of

Columns etc. and Mass concrete. (upto 10 ton)

No Description of Item Qty Rate Unit Amount

Providing formwork of ordinary timber planking so as to give

a rough finish including centering shuttering strutting and

propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal

of the same for in situ reinforced concrete and plain

concrete work in. (C) Vertical surface such as walls (any

thickness) partitions and the like including attached

buttresses & string course & the like. (upto 10 ton)

Steel work welded in built up sections,framed work

including cutting, histing, fixing in position and applying a

priming coat of red lead paint :-

4.50 9,018.30 Quintel

(A) In beams and joints channels angles, tees, flats with

connecting cleats as in main and cross beems, hip and jack

reffers, purlins connected to common raffers and the like.

Supply, Erection,Installation, testing and commissioning of

heavy grade M.S PIPES 'C' class confirming to IS: 1239 / IS:

3589 part II complete with ALL PIPE FITTINGS such as bends,

24 tees, reducers, rubber insertions/orifice plate, flanges, 133.00 1,351.69 Rmt

gaskets, nuts and bolts, etc. "Heavy Class" including fixing

the pipe on wall / ceiling with suitable MS strip / clamps /

bracket. [Make : Asian,tata,zindal] 80MM(3INCH)

Supply, Erection,Installation, testing and commissioning of

heavy grade M.S PIPES 'C' class confirming to IS: 1239 / IS:

3589 part II complete with ALL PIPE FITTINGS such as bends,

25 tees, reducers, rubber insertions/orifice plate, flanges, 130.40 1,957.63 Rmt

gaskets, nuts and bolts, etc. "Heavy Class" including fixing

the pipe on wall / ceiling with suitable MS strip / clamps /

bracket. [Make : Asian,tata,zindal] 100MM(4INCH)

Supply, Erection,Installation, testing and commissioning of

heavy grade M.S PIPES 'C' class confirming to IS: 1239 / IS:

3589 part II complete with ALL PIPE FITTINGS such as bends,

26 tees, reducers, rubber insertions/orifice plate, flanges, 674.00 2,750.00 Rmt

gaskets, nuts and bolts, etc. "Heavy Class" including fixing

the pipe on wall / ceiling with suitable MS strip / clamps /

bracket. [Make : Asian,tata,zindal] 150MM(6INCH)

Supply, Erection,Installation, testing and commissioning of

heavy grade M.S PIPES 'C' class confirming to IS: 1239 / IS:

3589 part II complete with ALL PIPE FITTINGS such as bends,

27 tees, reducers, rubber insertions/orifice plate, flanges, 125.00 788.14 Rmt

gaskets, nuts and bolts, etc. "Heavy Class" including fixing

the pipe on wall / ceiling with suitable MS strip / clamps /

bracket. [Make : Asian]Asian,tata,zindal] 50MM(2 INCH)

No Description of Item Qty Rate Unit Amount

Supply, Erection,Installation, testing and commissioning of

heavy grade M.S PIPES 'C' class confirming to IS: 1239 / IS:

3589 part II complete with ALL PIPE FITTINGS such as bends,

28 tees, reducers, rubber insertions/orifice plate, flanges, 125.00 381.36 Rmt

gaskets, nuts and bolts, etc. "Heavy Class" including fixing

the pipe on wall / ceiling with suitable MS strip / clamps /

bracket. [Make : Asian,tata,zindal]25MM(1 INCH)

29 Supply & commissioning of Drainvalve.1 inch 20.00 1,144.07 No

Supply,erection,testing and commissioning of fire hose reel

equipment confirming to IS: 884- 1969 with up to date

amendments including 19 mm dia, 30 mtr long hose tubing

30 conforming to IS: 1532-1969 with up to date amendments 14.00 5,254.24 no

with swinging type MS hose guide [ Hose reel drum] fixing

bracket assembly and 25 mm dia gate valve nozzle finished

with post office red spray painted complete as required.

supply nutbolt providing,fixing,testing and commissioning

of dual plate non-return valve of following sizes conforming

31 to IS;5312 complete with 2.00 5,508.48 no

rubbergasket,GIbolts,nuts,washer,elboes,french,coupling

etc.as required 150 mm dia

supply nutbolt providing,fixing,testing and commissioning

of dual plate non-return valve of following sizes conforming

32 to IS;5312 complete with 2.00 4,661.02 no

rubbergasket,GIbolts,nuts,washer,elboes,french,coupling

etc.as required 100 mm dia

supply nutbolt providing,fixing,testing and commissioning

of dual plate non-return valve of following sizes conforming

33 to IS;5312 complete with 6.00 4,067.80 no

rubbergasket,GIbolts,nuts,washer,elboes,french,coupling

etc.as required 50 mm dia

Providing and fixing ,testing and commissioning of flanged

34 end bucket Strainer valve made from CI body with bottom 1.00 23,728.81 no

and top removable flanges of size 150mm dia

Supply & fixing in position ISI marked cast iron double

flanged butterfly valves (PN 1.6 MPa) as per IS:13095, with

SS disc, shaft, seating rings, nitrile rubber lining, internal

35 fastening, nuts, bolts including transporting to worksite, 3 8.00 1,525.42 no

mm thick rubber gaskets etc. including testing, Complete as

per drawings & directions of the Engineer-in charge. (MAKE

: Kirlosker / Kartar / Zoloto/ Audco / Advance) 50mm dia.

Supply & fixing in position ISI marked cast iron double

flanged butterfly valves (PN 1.6 MPa) as per IS:13095, with

SS disc, shaft, seating rings, nitrile rubber lining, internal

36 fastening, nuts, bolts including transporting to worksite, 3 6.00 3,559.32 no

mm thick rubber gaskets etc. including testing, Complete as

per drawings & directions of the Engineer-in charge. (MAKE

: Kirlosker / Kartar / Zoloto/ Audco / Advance) 80mm dia.

No Description of Item Qty Rate Unit Amount

Supply & fixing in position ISI marked cast iron double

flanged butterfly valves (PN 1.6 MPa) as per IS:13095, with

SS disc, shaft, seating rings, nitrile rubber lining, internal

37 fastening, nuts, bolts including transporting to worksite, 3 5.00 4,110.17 no

mm thick rubber gaskets etc. including testing, Complete as

per drawings & directions of the Engineer-in charge. (MAKE

: Kirlosker / Kartar / Zoloto/ Audco / Advance) 100mm dia.

Supply & fixing in position ISI marked cast iron double

flanged butterfly valves (PN 1.6 MPa) as per IS:13095, with

SS disc, shaft, seating rings, nitrile rubber lining, internal

38 fastening, nuts, bolts including transporting to worksite, 3 6.00 4,406.78 no

mm thick rubber gaskets etc. including testing, Complete as

per drawings & directions of the Engineer-in charge. (MAKE

: Kirlosker / Kartar / Zoloto/ Audco / Advance) 150mm dia.

Supply of RRL Hose, Male and female SS couplings duly

39 binded with GI wire, rivets etc. conforming to IS 636 (type- 14.00 2,983.05 no

A) as required. (Newage / Winco)

40 Supply erection commissioning of hose box double door 14.00 3,542.37 no

41 Supply of ss Branch Pipe ISI 14.00 2,283.90 no

42 Supply Erection of 2 Way Header for inlet. NOVEX, Swati 3.00 3,915.25 no

43 Supply Erection of Hydrant Valve IS. NOVEX, Swati 14.00 3,812.71 no

Supply and installation, testing and commissioning of

COMMON control panel for fire fighting system consisting

of electrical mortar driven 60HP main fire pump, Jokey

pump and 12.5 Hp consisting of the following. INCOMING:

1no. set of phase inducing lamps with SFU rate 350 A 1no

set of 400 Amps. TPNE Ai, bus bars 1no. 0-400 Amps.

Ammeter. 1no. 0-600 V voltmeter with phase selector

switch, isolating switch 400 A outgoing for main electrical

pump: 1 no 200 amps MCB 1 no. S/D starter suitable for

hp 1 no. single phase preventer suitable for the pump

described for 60HP 1 no. single phase preventer suitable for

44 the pump described above 1 no. set on./off indicating 1.00 1,11,864.41 no

lamps, 1 no. auto manual selector switch outgoing for jokey

pump 1no. 50 amps MCB 1 no. dol starter suitable for

hp 1no, single phase preventer suitable for the pump

described above 1 no. set of on/off indicating lamps 1 no.

auto manual selector switch ENGINE control selection no.1

diesel engine for stand by pump:a) Main switch 2 pole

on/off -1 no.b) Battery charger with transformer with

rectifier resistance DC ammeter, DC voltmeter, T/B selector

c) Indicating lamps for fault communication ( Battery

charger supply on, control on , engine running....

No Description of Item Qty Rate Unit Amount

Supplying installation ,testing and commissioning of electric

engine driven Main fire pump suitable for automatic

45 operation and consisting of following complete in all respect 1.00 2,18,000.00 Nos

as required. ENGINE 2280 LPM @ 70 MTR HEAD ,main

pump 60 HP(Kirloskar, Lubi)

Supplying installing testing and commissioning electrically

driven jockey pump of capacity 180 LPM at 70 mtr head

with all the necessary accessories viz., pressure gauges etc,

46 operating on 3PH 50 hz, 400/440 VAC supply including 1.00 62,853.31 NO

foundation, bolts etc. complete control panel shall be per

specification ( cost of control panel is not included)

(Kirloskar, Lubi)

47 pressure release valve 1.00 1,016.95 no

Supply,erection,testing and commissioning of pressure

release with pressure gauge

Supply & installation of fire main Pump 12 mm 3 core CABLE

for cantrol panal for fire, DARSHAN or equivalent

Supply & Installation of Manual call Point MCP, Agni or

51 Supply & Installation of Hooter, Agni or equivalent 7.00 805.08 no

suppply & installation smoke detector as per requirement &

directed by EIC. Agni or equivalent

53 Supply & Installation of 4 ZONE panal, Agni or equivalent 3.00 5,254.24 no

54 1mm 2core cable (RR CABLE or equivalent) 2400.00 87.71 Rmt

core cutting in wall,slab of required dia incl. patching around

gap with chemical for water proofing.

56 P&F foot valave of required size. 1.00 4,068.80 no

Consulting charges to deliver and issuing NOC approval from

local authority fire officer/nagarpalika/fire safety

57 department as your cost and testing & commissioning of 1.00 60,000.00 no

above said works. With plan approval & 3 year maintane

contract (including FSPA,FSCA,FSCR)

Supply of LT XLPE 3.5core 70sqmm (IS 7098)(I)-88 ISI

58 marked armoured cable multistrand Aluminium conductor 120.00 487.92 Rmt

for 1.1kv as directed by EIC.

Supplying of diesel engine driven fire pump suitable for

automatic operation and consisting of following complete in

all respect as required.DIESEL ENGINE 2280 LPM @ 70 MTR

HEAD 56HP_GLAND PACKING SEAL,ITH INCLUDING ALL THE

DIESEL ENGINE ACCESSORIES. (100 LTR FUEL

TANK,OIL,COOLANT AND BATTERY ETC) (Kirloskar, Lubi)

60 P & F sprinkler (Make Tyco or equivalent) 50.00 237.29 NO

A ESTIMATED COST - RS =

B Bidder’s Offer (+ / -) in % ------------- [B]

C Grand Total [C] = A +/- (A*B)]

C Grand Total [C] = A +/- (A*B)]

D Add 1% WELFARE CESS - RS = 1%

E Total with 1% Welfare Cess- RS=

No Description of Item Qty Rate Unit Amount

F Add 18% GST - RS =