Construction of Additional building at PHC Panchrukhi in Tehsil Palampur, Distt. Kangra, HP (SH- Providing EI therein)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (Make:-KEI,Anchor,L&T )Legrand (Myrius),L&T(Oris),Anchor(Roma plus)

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.(Make:-KEI,Anchor,L&T )Legrand (Myrius),L&T(Oris),Anchor(Roma plus)

Group C.

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. Make:Legrand (Myrius),L&T(Oris),Anchor(Roma plus

S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

supplying and Fixing of surface mounting 1x1 size LED solution suitable for surface application with the use for latest technology 20 Watt ( 2000 lumens) K-4000and it shold be compatible with spectfcations i.e. Power factor > 0.9 , Harmonic dlstortion < 10% and efftcacy > 100 tumens per watt, CRL>80. sultable for lnput voltage AC 220-240v ,50/60 HZ omplete with all accesseries,including connections,testing and commissioning etc.as required complete in all respects

(20 Watt) Round Surface LED-

Make :- Phillips, Panasonic ( PDLM11203BS )C&S, Jaquar or any other approved make.

supplying and Fixing of Recess mounting 1x1 size LED solution suitable for surface application with the use for latest technology 20 Watt ( 2000 lumens) K-4000and it shold be compatible with spectfcations i.e. Power factor > 0.9 , Harmonic dlstortion < 10% and efftcacy > 100 tumens per watt, CRL>80. sultable for lnput voltage AC 220-240v ,50/60 HZ omplete with all accesseries,including connections,testing and commissioning etc.as required complete in all respects

(20 Watt) Square Recess LED-

Make :- Phillips, Panasonic ( PDLM11203BS )C&S, Jaquar or any other approved make.

Providing and fixing Surface/ Recess LED Down lighter 36 watt of following rating Al housing and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

(36/40 Watt) Square Surface/Recess LED

Make :- Phillips, Panasonic ( PBLM21364 )C&S, Jaquar or any other approved make.

Providing, Installation, testing and commissioning of ceiling fan with socket size modular step type electronic fan regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

Ceiling Fan 1200mm Sweep Cat.A

Makes:- Usha,Crompton,Panasonic,

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, light duty,(Domestic) 250/300mm sweep

Make:- Usha, Crompton,Anchor by Panasonic (At Par Anchor by Panasonic Cat. No 13981)

Supplying and fixing of LED Bulk head light follwing rating with presure die cast aluminium housing complete with all accessories including making connections, testing etc. as required. Complete in all respect

10 watt , Bulk Head

Make :- Havells,C&S,Anchor,Panasonic(Cat No.-PBHM01107)

Providing and fixing indoor decorative aluminium extruded LED Tube fixture of following rating and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

LED Batten with tube rod 18 watt

Makes:- Bajaj (BLRB 18W CWc),C&S , Jaquar or any other approved make.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- Make: Usha/Bajaj/Crompton/Recold

25 Liter capacity water heater (Cat-A)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.

Make:Legrand (Myrius),L&T(Oris),Anchor(Roma plus

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. Make:- KEI/SCI/Havells/Plaza

2x2.5 Sq. mm.

2x 10 Sq. mm.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

PVC insulated HRFR LS Copper conductor 1.5 Sq. mm.

3x2.5 Sq. mm.

Make:- KEI/SCI/Havells/Plaza

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Make:- KEI/SCI/Havells/Plaza

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Make:- KEI/SCI/Havells/Plaza

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required

Make:- KEI/SCI/Havells/Plaza

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-4 way

Double door-12 way

Double door-16 way

Make:- L&T/Legrand/Schneider.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-A.

Make:- L&T/Legrand/Schneider.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

63 Amps. Cat-A.

Make:- L&T/Legrand/Schneider.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required

40 Amps. Cat-A.

63 Amps. Cat-A.

Make:- L&T/Legrand/Schneider.

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision to mount 8 module incomer, 2 module sub-incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required

Double door-2+4 way (8+6+12),horizontal type

Make:- L&T/Legrand/Schneider.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:- I

Armoured cable 150 sq. mm (3.5 core)

Make:- KEI/SCI/Havells/Plaza

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 150 sq. mm (3.5 core)

Make:- KEI/SCI/Havells/Plaza

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for pipe earth electrode complete as required.

Supplying and laying 6 SWG G.I. wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Earthing with copper. earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earthcomplete as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.

100 Amp. -10 KA

200 Amp. -16 KA

Make:- L&T/Legrand/Schneider.

Supplying and fixing copper strip bus-bars suitable for 200 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx4.75mm),in the existing enclosure with all accessories including connections etc. as required:-

Make :- Havells,L&T,C&S, GE.

Supplying and fixing voltameter,Ammeter,ASS+VES C.T. ,Indicator as required complete in all respects.

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:-

450 mm deep (nominal)

Vinay Chaudhary

Deepak Sood