Water Supply

Supply and Transportation of 12.5HP, 8-12 Stage ,4/5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well.Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/ ARYEN VARSHA /Falcon/Prithvi/ Suguna/Sterling/ JEROME PUMPS.

Supply of 3 Core 4.00Sqmm ISI marked Flat Copper cable of ISI for Submersible Motors conforming to IS 694:2010. Makes: Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/ Gloster/ Goldmedal / GM/ Finecab/ Million/ APAR(Anushakthi)/Sudhakar/ Lauritz Knudsen (formerly L&T) /CRI/Suguna/Cord wave/Salzer.

Fabrication ,transportation and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using LAURITZ KNUDSEN (FORMERLY L&T) / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc. complete for 3 phase motor pump sets. Makes: As per list of recommended brands. Voltmeter: 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor for above 7.5 HP to 12.5 HP with Star- Delta Starter

Earthwork in excavation for Pipe Line as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 304 MORTH Manual Means. (RBR-FNDN-1)

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding taxes and specials etc., complete. (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length in 6 m.) for 90mm dia 8.0 kg/ sqcm

Supply and delivery of 60/50 mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts for submersible motors with both ends square threaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights.Makes: As per list of recommended brands.

Supply and delivery of Bolts and Nuts with double washers including taxes and conveyance etc., complete (1/2" to 1")

Supply and Delivery of Pipe line and Bore well connection required material to the site including loading, unloading, transportaion & labour charges etc., complete as directed by the incharge of the work.

50mm Adopter Set

2 X 5' GI Nipple

50mm GI Long Coupling

65 X 50mm Adopter

2 X 12'' GI Nipple

50mm X 90 PVC RFTA

50x65mm mm CI Planges

Plange Wacthers

50mm MS Bore cover

Errection Charges

50mm MS Clamp Set

7/16 Service Wire

Drilling of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.

Drilling of Bore well 165 mm dia. up to 90.00 m

Drilling of Bore well 165 mm dia. above 90.00 m up to 150.00 m

Manufacture, Supply and Delivery of 180mm Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. for 180mm dia

Assistant Engineer

Nandikotkur Municipality

Supply and Transportation of 12.5HP, 8-12 Stage ,4/5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well.Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/ ARYEN VARSHA /Falcon/Prithvi/ Suguna/Sterling/ JEROME PUMPS.

Supply of 3 Core 4.00Sqmm ISI marked Flat Copper cable of ISI for Submersible Motors conforming to IS 694:2010. Makes: Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/ Gloster/ Goldmedal / GM/ Finecab/ Million/ APAR(Anushakthi)/Sudhakar/ Lauritz Knudsen (formerly L&T) /CRI/Suguna/Cord wave/Salzer.

Fabrication ,transportation and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using LAURITZ KNUDSEN (FORMERLY L&T) / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc. complete for 3 phase motor pump sets. Makes: As per list of recommended brands. Voltmeter: 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor for above 7.5 HP to 12.5 HP with Star- Delta Starter

Earthwork in excavation for Pipe Line as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 304 MORTH Manual Means. (RBR-FNDN-1)

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding taxes and specials etc., complete. (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length in 6 m.) for 90mm dia 8.0 kg/ sqcm

Supply and delivery of 60/50 mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts for submersible motors with both ends square threaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights.Makes: As per list of recommended brands.

Supply and delivery of Bolts and Nuts with double washers including taxes and conveyance etc., complete (1/2" to 1")

Supply and Delivery of Pipe line and Bore well connection required material to the site including loading, unloading, transportaion & labour charges etc., complete as directed by the incharge of the work.

50mm Adopter Set

2 X 5' GI Nipple

50mm GI Long Coupling

65 X 50mm Adopter

2 X 12'' GI Nipple

50mm X 90 PVC RFTA

50x65mm mm CI Planges

Plange Wacthers

50mm MS Bore cover

Errection Charges

50mm MS Clamp Set

7/16 Service Wire

Drilling of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.

Drilling of Bore well 165 mm dia. up to 90.00 m

Drilling of Bore well 165 mm dia. above 90.00 m up to 150.00 m

Manufacture, Supply and Delivery of 180mm Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. for 180mm dia