Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.9 LAccepted-AOC 5D 32B GALI NO 8 VISHNU GARDEN TILAK NAGAR WEST DELHI 110018 | DELHI | WEST DELHI | DELHI | 110018 | L1 | Accepted-AOC ok | |
| 2 | L2₹26.4 L+₹50,307 (1.95%)Rejected-AOC 0 0 NAGLA MALOO MOHAMMDABAD FARRUKHABAD FARRUKHABAD FARRUKHABAD UTTAR PRADESH 209625 | FARRUKHABAD | UTTAR PRADESH | 209625 | L2 | Rejected-AOC ok | |
| 3 | L3₹26.8 L+₹98,773 (3.82%)Rejected-AOC 34 RAJA ROAD DEHRADUN UTTARAKHAND 2480001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L3 | Rejected-AOC ok | |
| 4 | L4₹28.0 L+₹2.1 L (8.11%)Rejected-AOC 31 SARASWATI SONI MARG DEHRADUN | DEHRADUN | L4 | Rejected-AOC ok | |
| 5 | L5₹28.9 L+₹3.1 L (11.9%)Rejected-AOC | L5 | Rejected-AOC ok |
Tender Value
₹28.9 L
EMD Value
₹57,900
Closing Date
17 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Dehradun
CWE Dehradun
PROVN OF CERTAIN MINOR AND ALLIED WORKS UNDER AGE B/R-II OF GE DEHRADUN
2022_MES_563456_1
9761/DDN/E8
Open Tender
Civil Works
Item Rate
120 days
Dehradun
As per tender documents
5 documents required · 5 mandatory
₹500
GE Dehradun
₹57,900
Yes
7 Feb 2023
16 Nov 2022
19 Dec 2022
16 Nov 2022
17 Dec 2022
30 Nov 2022
Amount
Surface excavation in any type of soil n. exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.
Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in hard/dense soil complete all as specified and directed. .
M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) for foundation/ mass concrete complete all as specified and directed.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks in cement mortar 1:4, straight or curved on plan to any radius in half brick thick walls built in complete all as specified and directed.
M&L cement concrete 1:2:4 type B0 40mm thick in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.
M & L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4, surface finished even and fair (without using extra cement) complete all as specified and directed.
M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6), finished surfaces even and smooth complete all as specified and directed. .
M&L for preparation of newly plastered surface of walls including corners and applying two coats of cement-based paint finish wall surface even and smooth complete all as specified and directed.
Preparing new plastered surfaces and applying 3 coats of white wash on walls complete all as specified and directed.
M&L for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and levelled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surface in broken stone or boulder complete all as specified and as directed.
M&L 75 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed.
M&L for cement concrete type B-1 (1:2:4) (20 mm graded stone aggregate) 25 mm thick as in floor finished complete all as specified and directed.
M&L for screed bed bedding 15 mm thick in cement mortar (1:6) for floor laying floor finish complete all as specified and directed.
M&L for coloured joint free non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to match complete all as specified and directed.
M&L for coloured digital ceramic tiles in vertical surface 375 x 250 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in CM (1:3) complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection complete all as specified and as directed.
S&F Aluminium Anodised window and ventilator shutters, side hung/sliding /fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alminium snap beading, screws, anodised fitting such as peg stays 150 mm long (01 Nos),hinges type B-21, 100 mm long (02 Nos) ,suitable handle (01 Nos) etc including powder coating of any colour (min thickness of powder coating n less than 50 micron) complete all as specified and directed.
S & F for PVC solid factory-made door frame (chowkhat) of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification and drawing complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gab insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as shown in SSR Part-II and as directed.
S&F 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.
S&F 150 mm long Aluminium anodised handles of fabricated type complete all as specified and as directed.
S & F butt hinges 100 mm size medium weight cold rolled stainless steel and fixed complete all as specified and as directed.
S & F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy & fixed compete all as specified and directed.
Supplying, fixing, jointing and testing galvanised steel water tubing 15 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.
Supplying, fixing, jointing and testing galvanised steel water tubing 20 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.
S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) water closet, including connection to trap and to flushing pipe, anti syphonage pipe etc, and making good to floor complete all as specified and as directed.
S & F 10 litres capacity PVC low level valve less symphonic action type flushing cistern white with inlet, float valve, float and handle including brackets with 32 mm dia PVC pipe 600 mm long complete all as specified and directed.
Supply only PVC connection 15 mm dia 450 to 600 mm long with brass fly nut at both ends complete all as specified and directed.
S&F 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including supply & fix 20 mm dia GI light grade wash out pipe 450 mm long with plug and 20 mm dia GI light grade over flow pipe 600 mm long with fitting complete all as specified and directed.
Supply & fixing ball valves, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed for 25 mm bore size complete all as specified and directed.
S&F 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F Vitreous China wash hand basin, white, oval type counter top of size 550mm x 400 mm fixed on and including cast iron cantilever bracket, 32 mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed. Note: Pillar tap shall be measured as supply only under respective item.
S&F 15mm dia swan neck pillar tap (for oval type WHB) brass chromium plated with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, and fixed complete all as specified and as directed.
S&F 15 mm dia bore chromium plated concealed stop cock, complete all as specified and as directed.
S & F brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule complete
S & F 15 mm bore bib taps, chromium plated cast copper alloy long body, screwed down, screwed for iron pipe or for brass ferrule complete
S & F Chromium Plated brass soap dish fixed to wall with chromium plated brass screwed and cup washer complete all as specified and directed.
S & F brass chromium plated towel rail, 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.
M & L for PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm bore outlet complete all as specified and directed.
S & F PVC (SWR) soil waste & vent pipe in any length without ears laid in floors, trenches or fixed to wall complete for 75 mm dia bore of pipe complete all as specified and directed.
S & F PVC (SWR) soil waste & vent pipe in any length without ears laid in floors, trenches or fixed to wall complete for 110 mm dia bore of pipe complete all as specified and directed.
S & F PVC (SWR) bends, T, reducer any radius with rubber ring joints, fixed to wall/floor/ in trenches for 75 mm dia pipe complete all as specified and directed.
S & F PVC (SWR) bends, T, reducer any radius with rubber ring joints, fixed to wall / floor / in trenches for 110 mm dia pipe complete all as specified and directed.
S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde E-250) quality-A complete all as specified and directed.
Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws complete all as specified and directed.
Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
Removing excavated material n.exe 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed
S&F 150 mm Salt glazed stoneware drain pipes, grade ‘A’ complete all as specified and directed
M&L for cement concrete 1:3:6 type C2 concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in 150mm dia pipe complete all as specified and directed.
M&L for providing precast cement concrete type 1:2:4 (using 20mm ) in landing, cover slabs (for manholes etc) complete all as specified and directed.
M&L for construction of Soakage wells 1.20 m internal dia and 3.00 m effective depth complete all as specified in PS here in after and shown on drawing No CEBZ TD Drawing No. 309 Sh 1 to 4/4.
M&L for pre-polished pavement coloured chequred tiles glossy finish of size not less than 300 x 300 x 20-22mm thick with anti-skid properties laid over 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.
S&F in repair Vitreous China urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified & directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil complete all as specified and directed.
M & L for providing cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
Supply only Chain link MS galvanised fencing, any size or type weight n. exc 4 kg per sqm complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire any size or type weight n. exc 4 kg per sqm complete all as specified and directed.
S & F mild steel work as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including imbedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but not exc 22.50 cm long, diameter of neck n exc 12 mm complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a cost of red oxide primer complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws complete all as specified and directed.
Supply and application of sport flooring for court with hybrid water borne PU top coating which adorable required minimum maintenance all weather suitable/ eco-friendly protective against UV rays consist of following layers: M&L for grinding and repairing of court with micro concrete including 2x2 mtr grove cutting 1.5 mm deep and one-layer fibre glass mesh. One layer of primer is done on top of it with two layers of re surface and three layer of rubber cushion and two layer of colour sand mix paints with one layer of top coat paints and one layer of court marking complete all as specified and directed.
S&F Acrylic 3mm thick PVC sheet for fencing for garden, balconies etc complete all as specified and directed.
M&L for RCC M-25 (using 20 mm graded stone aggregate) in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc. complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Use and waste of steel Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; NOT exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
S&F for rolled mild steel in joist, channel, angle, or tee section, fixed independently, without connecting plates, etc., cut to ordinary length with in 20mm of the length indicated as in fencing post conforming to Fe 410 W (gde E-250 quality B) complete all as specified and directed.
M&L for 100mm thick cement concrete 1:4:8 type D2 40mm graded stone aggregate and finishing the surface even and smooth (Without using extra cement) complete all as specified and directed
M&L for Cement concrete type C2 1:3:6 (40mm crusted stone graded aggregate) in foundations, filling and mass concrete as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.
S & F for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified and directed.
S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming Fe-410W(GdeE-250) quality 'B' complete all as specified and directed.
V S ENTERPRISES
Shree Durgai Construction Co.
M/s RP AGRAWAL
M/s RAM RATAN AND SONS
R K BUILDERS
SRI GANESH ENTERPRISES
M/s Pradeep Kumar
VERDHMAN ASSOCIATES
M/S C S AITHANI
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .