Repair to roof, flooring, joinery, sanitary fittings etc to certain buildings of 122 Inf Bn (TA) Calicut and Periodical services to buildings at west hill Calicut under AGE (I) Cannanore.

Amount

Dismantling single layer Mangalore pattern tiles in roofing including tilting tiles all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated) sheets in roof coverings all as specified and directed.

Dismantling of battens for tiles, shingles etc of any size including tilting fillets all as specified and directed.

Dismantling timber scantling 40 sqcm and over in section in any position unframed work all as specified and directed.

M&L for roof tile, Mangalore pattern, interlocking at side joints, laid dry all as specified and directed.

All as per item No 5 here in before but except tile all as specified and directed. Note : Serviceable tile obtained from item No 1 shall be reused.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar (1:6) all as specified and directed.

All as per item No 7 here in before but except ridge tile all as specified and directed. Note : Serviceable ridge tile obtained from item No 1 shall be reused.

M&L for second class hard wood clean sawn batten of sectional area exc. 5 sqcm and not exc. 15 sqcm at exc. 30 cm and not exc. 35 cm centres all as specified and directed.

All as per item No 9 but except batten all as specified and directed. Note : Serviceable batten obtained from item No 3 shall be reused.

M&L for preparing surface of tiles battens, new of any size and spacing, and treated with two coats of creosote oil (measured overall on one side only spaces not deducted) all as specified and directed

M&L for second class hard wood in scantlings clean sawn, unframed work, as in rafters, purlins etc. timber fixed all as specified and directed.

All as per item No 12 here in before but except timber all as specified and directed. Note : Serviceable timber obtained from item No 4 shall be reused.

M&L for preparing surfaces of wood and wood based materials new of any description and girth not otherwise described and treated with two coats of creosote oil all as specified and directed

M & L for 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs fixed with coach screws all as specified and directed.

M&L for 6 mm thick non asbestos cement two piece adjustable serrated ridge for corrugated sheets fixed with coach screws all as specified and directed.

M&L for structural steel work in tubular trusses including special shaped washer, two coats of synthetic enamel paint over a coat of primer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturers instructions as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturers instructions as directed.

M&L for preparation of new or old untreated steel surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

Demolition of stone slab and tiles of any description and thickness in floors including cement mortar bedding (but not backing), and rubbish off the premises outside MD land and all as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removing debris outside MD land all as directed.

M&L for coloured joint free non-skid ceramic tiles, 8mm to 10mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured / white cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) all as specified and directed.

M&L for coloured non-skid ceramic tiles, 7mm to 8mm thick, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in skirting / dado, set and jointed in neat cement slurry and pointed in coloured / white cement to match laid over and including 10 mm thick backing on stone/brick masonry surfaces in cement mortar (1:4) all as specified and directed.

Taking down chowkats with shutters n exc. 1.5 Sqm each (without taking off shutters from the frame) all as directed.

Taking down chowkats with shutters exc. 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frame) all as directed.

Taking down wooden door shutters of any description n exc 1 Sqm each all as directed.

Taking down wooden door shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each all as directed.

M&L for second class hardwood, plain, solid straight chowkats & frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed.

All as per item No 29 here in before but for with transoms and mullions, with double rebated on the solid frame for fixing double shutters all as specified and directed.

S&F 4mm thick plain sheet glass, ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane all as specified and directed.

M&L solid PVC door frame of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, all as specified and directed.

S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain coloured PVC “C” channel having a PVC sheet strip of 20mm width stock inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour of PVC sheet fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement etc. Details as peer specification and drawings and all as directed.

M&L for second class hardwood factory made, panelled shutter 30mm thick (two panesl) with lock rail and panel of 9mm BWP, commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed.

S&F 30mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc; (with out sash bars), edges of framing, fitted with cut and mitered beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a) all as specified and directed.

S&F 30mm thick second class hardwood glazed and skeleton shutters, open rebated, edges of framing plain, chamfered or rounded, fitted with cut and mitred and rebated sash bars, divided into squares, for securing glass gauze, etc; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20(b) all as specified and directed.

S&F stainless steel butt hinges medium weight; 100mm size all as specified.

S&F stainless steel butt hinges medium weight; 75mm size all as specified.

S&F 100mm long aluminum anodized barrel tower bolts of extruded section all as specified.

S&F 150mm long aluminum anodized barrel tower bolts of extruded section all as specified.

S&F extruded aluminum alloy anodized handle fabricated type 100mm size all as specified.

S&F extruded aluminum alloy anodized handle fabricated type 150mm size all as specified.

S&F aluminium anodised sliding door bolts 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed

S&F in repairs aluminium anodised sliding door bolts 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed

M&L for mild steel flat iron of size 25 x 3mm for holdfasts for securing new wooden frames and similar articles conforming to Fe-290 Gde-E-165 all as specified and directed.

M&L for PCC 1:2:4, type C1 using 20mm graded stone aggregate for fixing hold fast including necessary form works all as specified and directed.

S&F for second class hard wood, plain fillets, square, rectangular or triangular in section, clean sawn, sectional area exc.6 & n. exc. 13 sqcm secured with nails or brads all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

Supply and Fix in repairs Netlon ( Good quality ) for fly proofing (Necessary beading will be measured in the appropriate item ) as specified and directed.

Dismantling wall and ceiling boards or insulation boards/slabs/blankets any thickness, including cover fillets all as specified and directed.

S & F for anodized aluminium snap grid frame work as in clause No. 10.38 of MES Schedule Part I for false ceiling of size 605 mm x 605mm with supporting hanger comprising of 6 mm MS rod / GI flat 40x3mm, ‘J’ bolt with necessary washers, bolts and nuts for securing frame work to ceiling and to the snap grid complete all as specified and directed

M & L for 4mm thick High Pressure Steam Cured ( HPSC ) non asbestos fibre cement building boards fixed or laid/inserted to aluminium snap grid frame work with screws all as specified and directed.

M&L for preparation of new cement concrete ceiling surfaces or non AC ceiling board surfaces and applying three coats of white wash all as specified and directed.

Demolition of brick or stone / boulder masonry built in cement or cement lime mortar, including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and pre cast concrete articles and removing debris outside MD land all as directed.

M&L for laterite stone masonry, regular coursed, well bonded and solidly hearted , built in CM (1:6) all as specified and directed.

All as per item No 56 here in before but except laterite all as specified and directed. Note : Serviceable laterite stone obtained from item No 55 shall be reused.

Taking down cement or cement lime plaster on brick/stone walls or in ceiling surfaces incl racking out joints hacking for key scrubbing down with water etc and removing rubbish outside MD land all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on stone masonry surfaces, finished even and smooth without using extra cement all as specified and directed .

M&L for rendering 15mm thick in cement mortar (1:4) on stone masonry surfaces, finished even and smooth without using extra cement all as specified and directed .

M&L for preparation of new plastered surfaces and applying 3 coat of white wash on walls surfaces all as specified and directed.

M&L for preparation of new plastered surfaces and applying 2 coat of cement base paint over a coat of primer on walls surfaces all as specified and directed.

M & L for 100 mm thick plain cement concrete 1:4:8, type D2 using 40mm graded aggregate as in sub floors, sub bases etc complete all as specified and directed

M&L 40mm thick PCC 1:2:4, Type B1 (using 20mm graded stone aggregate) as in flooring and finished even and smooth without using extra cement all as specified and directed.

Taking up or down steel tubing and connecting including cleaning for removing to store of sizes upto 20mm bore all as directed.

S&F for 15 mm bore UPVC pipes (ASTM) of pressure rating 10 kgf / cm2, fixed complete to walls, ceilings etc. all as specified and directed.

S&F for 20 mm bore UPVC pipes (ASTM) of pressure rating 10 kgf / cm2, fixed complete to walls, ceilings etc. all as specified and directed.

S&F 15 mm bore bib taps, cast copper alloy, chromium plated, screwed for iron pipe or for PVC pipe or for brass ferrule, fixed as in repairs all as specified and directed.

S&F in repairs 15mm pillar taps cast copper alloy with capstan heads, chromium plated, screwed down high pressure ,with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed all as specified and directed.

S&F stop cock 15mm bore cast copper alloy, chromium plated, screwed both ends for iron pipe or for unions and screwed down, high pressure with long shank & cup fixed in repair complete all as specified and directed

S&F 500 litres capacity rotational moulded polthylene water storage tanks(cylindrical vertical with closed top) of make Sintex/Polycon/Plasto hoisted and fixed in position including taking down unserviceable water tank all as specified in SSR Part I,2009 and directed.

S&F Vitreous China Wash down water closet pan (Pedestal pattern) white, (excluding flushing cistern and flush type) pedestal pan and trap including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc complete including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device as fixed in repairs all as specified and directed.

S&F in repair for PVC valveless, syphonic action type flushing cistern low level, 10 Litre capacity, white, with inlet, ball valve, float and handle including flush pipe all as specified and directed.

Supply and fix in repairs PVC connection 60cm long with PTMT nuts for flush tank, wash basin, etc. all as specified and directed

S&F in repairs 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

S&F in repairs Health faucet (ABS body) , chromium plated suitable for 15mm dia, 1.25m long flexible tube and ABS wall hook with suitable fixing arrangements all as complete all as specified and directed.

M&L complete removal of existing old treatment from wall surfaces by scapping down and preparation of surfaces even and smooth with 3mm thick of wall care putty and applying two coats of first quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre over a coat of alkali resistant primer all as specified and directed.

M&L complete removal of existing old treatment from wall surfaces by scapping down and preparation of surfaces even and smooth and applying two coats of first quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre over a coat of alkali resistant primer all as specified and directed.

M&L complete removal of existing old treatment from wall surfaces by scapping down and preparation of surfaces even and smooth and applying two or more coats of first quality acrylic smooth exterior paint @ 1.67 litre per 10 sqm over a coat of exterior primer @ 2.20kg per 10sqm all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of walls including cornices and pilasters by brooming down and applying two coats of white wash including necessary scaffolding or ladder etc complete all as specified and directed.

M & L washing, rubbing down and stopping of previously distempered surfaces of walls and applying one coat of oil emulsion distemper (white or tinted) all as specified and directed.

M&L for preparation of old decorated ceiling surfaces (plastered or unplastered) and applying one coat of oil emulsion distemper (white or tinted) all as specified and directed.

M&L for preparation of old decorated wall surfaces (plastered or unplastered) and applying one coat of cement based paint all as specified and directed.

M&L for preparing old painted wood/wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

All as per Sl item No 84 above, but on steel surfaces all as specified and directed.

M&L for preparation of old painted surface of labels (square, rectangular or triangular ) in any shape n. exc. 0.1 Sq.m each and applying one coat of synthetic enamel paint (with black paint) including cutting in edges all as specified and directed.

M&L for writing letters or figures ( Block, Roman, Italic or Indian) n. exc. 30cm long including necessary stops, commas, short lines, dashes, hyphens ,brackets, etc. with white enamel paint all as specified and directed.

M&L for writing stops, commas, short lines, dashes, hyphen, brackets etc all as specified and directed.

RS ENTERPRISES