Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹16.9 L
EMD Value
₹17,000
Closing Date
23 Nov 2026, 4:00 pmDue today
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EXECUTIVE ENGINEER, ELECTRICAL (R&B) DIVISION, VADODARA
Providing DG set (3 nos.) for power supply backup for lifts installed in Satyamevjayate quarters, Gotri -Vadodara.
364781
E Tender SK/03 of 2026-27
Open
Electrical
Works
Vadodara
6 documents required · 6 mandatory
₹900
Executive Engineer, Vadodara Electrical Division, Vadodara
₹17,000
7 Nov 2026
7 Nov 2026
7 Nov 2026
23 Nov 2026
7 Nov 2026
90 days
Name Of Work : Providing DG SET(3nos) For power supply backup for Lifts installed in SatyamevJayate Quarters ,Gotri -Vadodara
Qty. Unit Item Per Amount
In Figure In Words
3 No 1 Supplying and erecting, commissioning and testing of Diesel 471288.22 Rupees Four Lakh ea
Generating set confirming to IS: 4722:1968 & BS:5514 Seventy One
having continuous rating, 3 phase, 415 volts, 50 cycles A.C. thousand Two
supply comprising of a totally enclosed air/water cooled diesel hundred Eighty
engine with multi-cylinders developing suitable BHP not less Eight Paise
than following capacity at 1500 RPM with 10% overload for Twenty Two Only
one hour in 24 hours with standard accessories like fly wheel,
lubricating oil cooler, "A" class governor, heavy duty fuel
wheel and lubricating oil filter, oil bath air filler, lubricating oil
pressure gauge, end exhaust manifold, standard set of tools
with adjustable spanners, screw drivers, cylinder head to
cover, joint cylinder head to exhaust, element lube oil filter,
/ 24 volts electric starting equipment complete with standard
heavy duty battery, dynamo, cut-outs, ammeter, necessary
wiring, pressure gauge, starter etc and heavy duty Residential
type exhaust silencer (With DEF System) and vertical hot air
logged with asbestos rope, save oil trays, exhaust piping of
required length, standard wall/floor mounted fuel with level
indicator and piping and drip proof alternator, self excited, self
regulated, screen protected, with excitation system, capable
of delivering the rated system output at 415 volts, 3 phase,
0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-
4722- 1968 with voltage regulation +/- 5% of rated voltage
from no load to full load. Both the engine and alternator fitted
on a common fabricated steel base plate with antivibration
mounting engine and alternator both connected to each
other by flexible flange coupling and with floor/wall mounted
control panel box comprising of voltmeter ammeter, selector
switches, ACB / MCCB / MCB of adequate capacity,
indicator lamps duly wired with HRC fuses. The alternator &
control panel shall be connected with provided suitable
capacity armoured cable and complete with Acoustic
enclosure (canopy) made out of 16 SWG CRCA Sheet, sound
absorbing material Rockwool of 64 density & 100 mm thick
conforming to IS:8183 / PU Foam of 40 Density - at least
mm. The resin bonded rockwool covered from inside the
canopy by perforated sheet with 3/4 mm holes, sound level
not more than 75 dB at a distance of 1 mtr, as per PVCT
norms.DG set should have in built fuel tank capacity of
minimum 8 hrs of continous running capacity on full load .
Erection, commissioning and satisfactory testing as per
requirement with first filling of fuel (minimum up to the 80% of
fuel tank capacity), oil, etc. with guarantee / Warrantee of
complete system for Two years. & with obtaining all necessary
certificate from Electrical Inspector. The Capacity and Ratings
of DG sets are as below. (As per new CPCB4+ Emission
norms Engine With - Turbo Charger, EGR (Exhaust Gas
Recirculation), CRS (Common Rail Fuel System), DOC
(Diesel Oxidation Catalyst), SCR (Selective Catalytic
Reduction), Integrated wiring harness connected to ECU .)
(C) Continuous Rating of 20 KVA ,BHP not less than 26 BHP
3 No 2 Providing & erecting approved make ATS panel suitable for 48789.06 Rupees Forty Eight ea
following size of 3 phase, 415 V., 50 cycles, A.C. diesel Thousand Seven
generating set complete of scope as detailed below: E) ATS hundred Eighty
Panel for 100/ 125 KVA 3 phase DG Set Nine Paise Six
1693540.00 dg set new 30 kva - Copy Page 1 of
Qty. Unit Item Per Amount
In Figure In Words
12 No 3 Supplying & erecting earth pit of minimum bore dia.150mm 4591.46 Rupees Four ea
size approved make Earthing Electrode consisting Pipe-in- Thousand Five
Pipe Technology as per IS 3043-1987 made of corrosion free hundred Ninety
hot dipped G.I.Pipes having Outer pipe dia of 50mm having One Paise Forty
80-200 Micron galvanising, Inner pipe dia of 25 mm having Six Only
200-250 Micron galvanising, connection terminal dia of 12mm
with constant ohmic value surrounded by highly conductive
compound with high charge dissipation suitable for following
type of applications with chamber and heavy duty cover.
(A)(approved make OEM has to submit test certificate
including value of earth resistance of installation duly stamped
and signed by agency and officer Incharge has to ensure the
value of earthing resistane mentioned in test Certificate) &
having back filling compound of (B) Inner chemical (CCM
Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC
62561-2017, Voltage drop:- < 1 volt at no load & dry form,
Sulphar content:- <2%(C) Back fill Compound :- Earthing
compound should be capable to retain moisture for long time
Necessary test report must be submitted by Agency.
(a) For Electrical Installation up to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
40 kg 4 Providing and erecting HOT deep Galvanised iron strip wire 8 77.77 Rupees Seventy kg
to 16 SWG. Seven Paise
3 nos 5 Providing and erecting Approved make Four pole moulded 6173.12 Rupees Six ea
case circuit breaker having breaking capacity ICU of 25 KA. at Thousand One
415 V,having normal current rating up to 25 A to 100A. with hundred Seventy
Fixed thermal & magnetic release suitable to work on A.C. Three Paise
supply 50 c/s. with all internal connections, spreader tinned Twelve Only
copper & complete erected in existing 16 G.M.S. housing.
ICS=100% of ICU only Cat -III
150 mtr 6 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 220.18 Rupees Two mtr
cable multistrand Aluminium conductor for 1.1 KV. to be laid hundred Twenty
on wall with necessary clamps or in existing trench / pipe of Paise Eighteen
following size of cables (B) 3 1/2 core 35 Sq. mm ( 16 Sq. Only
130 mtr 7 Making trench in Hard Murrum / Tar Road of suitable width of 74.74 Rupees Seventy mtr
90 cm or required depth for laying any size of cable or Four Paise
locating the fault all over the run and back filling the same Seventy Four Only
and making the surface as normal ground.
130 mtr 8 Providing & laying approved make Double walled corrugated 95.95 Rupees Ninety mtr
pipes (DWC) of polyethylene(conforming to IS 14930 II )with Five Paise Ninety
necessary connecting accessories of same material at Five Only
required depth in existing trench for laying of cable. below
ground / road surface for enclosing cable(C))90 mm outer
9 nos 9 Providing and, fixing heavy duty flange type brass double 75.75 Rupees Seventy ea
compression type cable gland with rubber ring for PVC Five Paise
insulated armoured cable complete with out going tails, Seventy Five Only
insulating tape etc for following size of cables.(B) 3 & 1/2 core
9 nos 10a Solder less crimping type Aluminium lugs conforming to IS 15.15 Rupees Fifteen ea
suitable for cable of following size evenly crimped with high Paise Fifteen Only
pressure tool & connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved manner. ((C)
27 ea 10b (D) 35/50 Sq.mm. 20.20 Rupees Twenty
I am / We are willing to carried out the work at ____% Above/below _____________________
______________________________________% (Should be written in figure and words) of the estimate rates mentioned above.
Amount of my/our tender work out as under.:
1693540.00 dg set new 30 kva - Copy Page 2 of
Qty. Unit Item Per Amount
In Figure In Words
Estimated Amount Estimated Amount
Put to Tender Rs.________________ Put to Tender Rs.________________
(a) I/We hereby declare that I/We have visited the site and fully exquisite myself/ourselves with
the local situation regarding materials, labour and other factors pertaining to work before
submitting tender.
(b) I/We hereby declare that I/We have carefully studied the conditions of contracts, Detailed
specification and other tender document of this work and agree to execute the same
Note : 1) The Rates are inclusive all taxes, transport charges and storage charges except GST and applicable GST will be added
seperately in the bill and will be paid to the agency
2) The materials covered under contractor should be got approved from the Dy. Executive Engineer, in charge of the work.
3) The materials and work shall have to be used and carried out as specification in technical note.
4) All works shall be carried out as per public works Department hand book and Other specifications of the Dn. Or as
5) Rates are inclusve of 1% Labour cess in tender amount so 1% of total amount of bill will be deducted from the bill.
5) Rates are inclusve of 1% Labour cess in tender amount so 1% of total amount of bill will be deducted from the bill.
6) The material to be used in this work should be approved strictly from Engineer-in-charge / Deputy Ex. Engineer
7) The agency will have to agree to carried out the work as per brand demand of concern deptt.
8) Credit of Dismentalled Material to be retained by Agency & cost of Dismentalled Material
Rs.Nill/- will be recoverd from the bill.
(Signature of Contractor)
Deputy Executive Engineer
Vadodara Electrical Sub Division,
R&B Deptt. Vadodara
1693540.00 dg set new 30 kva - Copy Page 3 of
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01.Notice Inviting Online tender.pdf
02.Electrical Tender General and Technical Condition NEW SBD (2).pdf
03.SCHEDULE B.pdf
05.Special instruction to bidders.pdf
06.General Terms and Conditions for Tender.pdf
07.NOTICE.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .