Construction of Rest House near Dhanotu Chowk in Tehsil Sundernagar Distt. Mandi H.P.(SH- C/O Building portion, Civil work Including, W.S and S.I, Rain water harvesting tank and Septic Tank )

Amount

Excavation in foundation ,Trenches etc in earth work in all kind of soil such as pick work, jumper work, blasting work in soft and hard rock conglomrate rock or saturated soil including chiselling / wedging out rocks (where blasting is prohibited) and pumping or bailing out watering/ dewatering upto any lift, stacking the excavated soil upto any lead from the edge of excavation and then returning the stacked soil in layers, when required into plinths,sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing form work with steel plates 3.15mm (three point fifteen milimeter) thick welded with angle iron frames 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centering,shuttering,strutting and proping etc. with wooden battens and ballies heights of propin and centering below supporting floor to ceilling in all heights and removel of the same for in-situ reinforced concrete and plain concrete work including carriage of materials with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

(a) Foundations footing,bases of columns and the like and mass concrete.

(b) Columns pillars, posts, and struts square,rectuangular of polygonal in plan.

(c) Beams , cantilevers, girders and lintels sides and soffits of bems, beam haunchingcantilivers, girders, bressumers and lintels upto any in depth. &upto all heights from floors.

(d) Flat surfaces such as soffits of suspended floors,roofs,landings and the like Floors,etc.upto any thickness.

(e) Staircases with slopping or stepped soffits includding risers and stringers excluding landing.

(f) Edges of slabs and breaks in floor and walls of any width wide.

Providing and laying cement concrete 1:4:8 (One cement:Four Sand:Eight graded stone aggregate 40mm (forty milimetre) nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and laying cement concrete M-20 (design Mix) grade of cement concrete work mechnically mixed and vibrated with minimium cement content of 320kg/cum with graded crushed stone aggregate 20mm nominal sizes and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work including carriage of materials in with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

(a) Foundation , footing, basis of columns and mass concrete.

(b) Columns pillars posts and struts upto all floor levels.

(c) Suspended floors , roofs, landing , shelves and their supports , balconies,centilevers slabs in all hights & all floor level

(d) Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto all floor level.

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position including cost of binding wire complete upto floor all level : including carriage of materials with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Brick work using common burnt clay building bricks in super structure and above plinth in Cement Mortar 1:6 (one Cement : six Sand) Second Class Bricks including carriage of materials with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Brick work using common burnt clay building brick in foundation and plinth in Cement mortor 1:6 (one cement : six sand) 2nd class brick complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Half brick work using common burnt clay building bricks in super-structure above plinth in Cement Mortar 1:6 (one Cement : six Sand) Second Class Bricks including carriage of materials with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :six sand : twelve graded stone aggregate 20mm (twenty milimeter) nominal size) at plinth level in Cement Mortar 1:6 (1 cement:6 sand) including carriage of materials with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Boulder filling dry hand packed tightly in under floor complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing flush door shutters interior grade, commercial type, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of stutters. 35mm (thirty five milimeter) thick i/c black enamelled M.S. butt hinges including carriage of materials with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 1.00mm (one milimeter) thick colored or plain lamination sheet (sunmica) on boards/plywood sheets with approved adhesive and nails etc complete. including carriage of materials with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 40 mm (forty milimeter) thick plain .framed panelling with necessary screws priming coat on unexposed surface etc. 2nd class deodar wood complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 75 mm x 62.5mm (seventy five into sixty two point five milimeter) rounded hand rails in straight length complete in all respect. 2nd class Indian teak wood omplete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 25mm= 25mm (twenty five equal twenty five )balusters 25mmx25mm (twenty five into twenty five milimeter) square wrought fixed with ends housed (square or splay) to hand rails and treads or strings complete in . 2nd class Indian teak wood complete with in all respect.including carriage of material within all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing aluminium sliding door bolts anodized. Colour and shade with bolts and nuts, screws etc. 300x16mm. (three hundred into sixteen milimeter ) complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing aluminum tower bolts(berrel type) anodized transparent or dyed to required shade and colour with screws etc. complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

(a)250 x 10 mm (two hundred fifty into ten milimeter)

(b)150 x 10 mm (one hundred fifty into ten milimeter)

Providing and fixing aluminum handles anodized transparent of dyed to required colour or shade with necessary screws complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

(a) 125 mm (one hundred twenty five milimeter)

(b) 100 mm(one hundred milimeter)

Providing and fixing bright finished hand drawn hooks and eyes (a) 150 mm (one hundred fifty milimeter) with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 12mm (twelve milimeter) thick 150mm (one hundred fifty milimeter) wide pelmet with 25 mm diametre wooden curtain rods and brackets including fixing 25x3mm (twenty five into three milimetre ) M.S. flat at 10 cm (ten centimeter). Long and plugs etc. complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. 1st class deodar wood.

Providing and fixing 100mm (one hundred milimeter) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing bright finished brass ball catcher 10 mm (ten milimeter )dia for cup board complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 65x35mm. (sixty five into thirty five milimeter) special quality bright finished brass cup board locks or wardrobe locks with six levers including necessary screws etc. (Indian make of approved quality).complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing oxidized M.S. single acting spring hinges with necessary screws etc.150 mm (one hundred fifty milimeter) complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing M.S. double acting spring hinges bright finished with necessary screws. 150 mm (one hundred fifty milimeter)complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 19mm (nineteen milimeter) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc) complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 4mm thick water proof kit ply of standard quality ISI mark and approved shade and colour in wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and laying full body vetrified anti skid tiles (300x1200mmx10mm) (three hundred into twelve hundred into ten milimeter) grey/coloured or of approved shade in stair case treads of steps, risers and landing laid on a bed of 12mm (twelve milimeter ) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required to match the shade of tiles i/c rubbing and polishing complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and layin anti skid vetrified tiles 450x450x15mm (four hundred fifty into four hundred fifty into fifteen milimeter )coloured or of approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve milimeter) thick cement mortar 1:3 (onee cement : three sand) jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles as required complete in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing fully body vetrified tiles 600x600 mm (six hundred into six hundred milimeter )(flooring) grey/coloured or of approved shade in flooring treads of steps and landing laid on a bed of 12 mm (twelve milimeter) thick Cement mortar 1:3 laid over jointed with neat cement slurry finished with flush pointing in white mixed with pigment of required shade to match i/c rubbing and polishing complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

40mm (forty millimeter) thick cement concrete flooring 1:2:4 (one cement : two sand : four graded,crushed stone aggregate 20mm (twenty millimeter) nominal size) laid in one layer finished with a floating coat of neat cement including curing, carriage of materials within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing WI-PARAQUIT LAMINATE (nature structure textured surface AC-4-1286X194X8MM) wooden flooring of approved brand manufacture over cement concrete base with polythene and foam sheet cushion below as per drawing ,design and specification complete in all respect including carriage of materials as per the direction of Engineer in-Charge.

Providing and fixing exteriar vertified tiles of 600x600x10 mm (six hundrd into six hundred into ten milimeter) grey/coloured or of approved shade in flooring treads of steps and landing laid on a bed of 12 mm (twelve milimeter) thick cement mortar 1:3 laid over jointed with neat cement slurry finished with flesh pointing in white mixed with pigment of required shade to match i/c rubbing and polishing complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and laying matt finish spartic ceremic tiles 5.5mm. (five point five milimeter )thick (300 x300mm size) (three hundred three milimeter ) in flooring treads of steps laiding etc. on a bed of 12mm.(twelve milimeter ) thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement. complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and laying granite stone in slab 20mm (twelve milimeter) (average) thickness base of cement mortar 1:3(one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing 19mm.thick complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 10mm (ten milimeter) thick anti skid water proof stain and impect resistent heavy duty vitrified tiles Nitco or equivalant 600x600x10mm (six hundred into six hundred into ten milimeter ) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve milimeter) thick cement mortar 1:3 (one cement : thee sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete with in all respect.including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing fully body vitrified tiles 600x600X10mm (six hundred into six hundred into ten milimeter ) grey/coloured or of approved shade in skirting risers of steps and dados laid on a bed of 12 mm thick c.m. 1:3 laid over jointed with neat cement slurry finished with flesh pointing in white mixed with pigment of required shade to match i/c rubbing and polishing complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and laying digital spartic ceramic tiles 5.5mm (five point five milimeter) thick (300x600mm size) (three hundred ito six hundred milimeter ) in skirting risers of steps and dado on 12 mm (twelver milimeter) thick cement mortar 1:3 ( one cement: three sand) finished with flush pointing in white cement complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M:50 grade i/c border or curb block grey or colored over sub base of concrete with 25 mm (twelve milimeter ) thick average thickness of cement mortar 1:4(One cement:four mortar) laid over and joined with neat slurry mixed with pigment to match the shade of block i/c curing rubbing & polishing complete (sub base concrete floor to be paid for) 80mmthick inter locking blocks complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 10mm /12mm (ten milimeter / twelve milimeter )thick glass reinforced cladding of approved shape and textured of unistone or its equivalent made from portland cement alkally resistantant glass fibre uv resistant synthatic inorganic pigment combined with the range of chemical additive om exterior surface side as on faces of arch masonary etc. 12 mm (twelve milimeter) thick plaster jointed with neat cement slurry including scaffolding etc. complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the specification and direction of Engineer-in-Charge.

Providing and fixing 0.60mm (zero point sixty milimeter) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm diametre with prepainted limpet and rubber washers complete with all accesoriees as required complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing ridges or hips 60 cm (sixty centimeter ) overall with 0.60mm (zero point sixty milimeter) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with screws prepainted iron J or L hooks, bolts & nuts 6mm dia&prepainted G.I. limpet and bitumen washers complete with all accessories complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing valley 90 cm (ninety centimeter) overall 0.60mm (zero point sixty milimeter ) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 15 cm (fifty centimeter) wide 45 cm (forty five centimeter) over all semicircual plain G.I. sheet gutter with iron brackets 40x3mm (forty into three milimeter) size bolts nuts nad washers etc, including making necessary connection with rain water pipe complete as per standard design : 0.63 mm thick sheet complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm (one point sixty six milimeter into two milimeter ) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer (Base members of steel work shall be measured & paid separately) complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm (four point five kiligram/square meter) including filling the joints with approved adhesive complete150mm (one hundred fifity milimeter ) dia pipes complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 100 mm (one hundred milimeter) dia on wall faces PVC (D-plast) rain water pipe of working pressure not less than 45 kg/Sqm (forty five kiligram/square meter) including fitting the joints with adhesive complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. PVC Plain bend 150mm dia (one hundred fifty milimeter)

Providing and fixing high lax cilicate perforated water proof board 600mmx600x8mm (six hundred into six hundred into eight milimeter ) in ceiling fixed over aluminium tee sections with screws and including hangers complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing Fiber cement board ceiling in sofit of roof projection 8mm (eight milimeter ) thick complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Steel work welded in built up sections,trusses and framed work, including cutting , hoisting, fixing in position and applying a priming coat of red lead paint.

(i) In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like. complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

(ii) In trusses and trussed purlings in buildings complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm x 10 mm x 2mm (twenty milimeter into ten milimeter into two milimeter) and braced with flat iron diagonals 20 mm x 5 mm size with top and bottom rails of T.iron 40 mm x 40 mm x 6 mm (forty milimeter into forty milimeter into six milimeter ) with 38 mm (thirty eight milimeter) dia steel pulley complete with bolts and nuts locking arrangements, stoppers,handles,including applying a priming coat of red lead paint. complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be measured & paid separately). complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Applying one coat of AcrylicWashable emulsion Spectrum quartz king or equivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat i/c necessary putty to give smooth even surface, sand papered smooth complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing factory made u PVC white colour sliding glazed window upto 1.50 m (one point fifty milimeter ) in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ±0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm ( one hundred into eight milimeter )size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. complete with in all respect. including carriage of materials with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing f actory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, bust and other foreign matter etc including sand paper smooth complete with in all respect. including carriage of materials with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

6mm Cement plaster to ceiling cement Mortar 1: 3(1 cement:3 sand) complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 cement:6 sand).complete with in all respect. including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

15 mm (fifteen milimeter) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering up to floor two level including arises, internal rounded angles, chamfers and/or rrounded angles not exceeding 80 mm (eighty milimeter) in girth and finshed even and smooth in cement mortar 1:3 (one cement: three sand ) complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and san papered smooth. Priming coat with distemper primer. complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (one Cement : thee Sand : six Graded stone aggregated 20mm (twenty milimeter) nominal size) Curing complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing under layer for plinth protection of 75mm (seventy five milimeter) thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground. complete with in all respect. including carriage of material with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement:thee Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (one Cement : five Sand :ten graded stone aggregate) of 40 mm (forty milimeter ) nominal size) and 7.5 cm (seven point five milimeter) cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm (twenty milimeter ) nominal size) and finished with a floating coat of neat cement complete as per standard design with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and laying in trenches galvanised mild steel tubes (medium grade) tube fitting (earth work in trenches to be measured and paid for seperately ) including carriage of material in all leads & lifts.(confirming to BIS Specification) 20 mm (twenty milimeter) nominal bore. complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing to wall ceilling and floor galvanised mild steel tubes (medium grade) tube fitting and clamps including making good the wall ,ceilling and floor (confirming to be BIS Specification ) complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

(a) 15 mm nominal size (fifteen milimeter)

(b) 20 mm nominal size (twenty milimeter)

Providing and fixing PVC pipes complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

75 mm Nominal size (seventy five milimeter)

110 mm Nominal size (one hundred ten milimeter)

Making connection of galvanised steel distribution branch with galvanised mils steel main 20 mm to 40 mm (twenty milimeter into forty milimeter ) nominal bore by providing and fixing tee including testing and threading the pipes complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing PVC water storage tank of ISI 12701 marked G.I. inlet and outlet connection , 15 mm (fifty milimeter) nomonal bore ball valve and mosquito proof PVC cover with locking arregment including hoisting up to all height above ground level (i) 1000 litters (one thousand letters) net capacity tank. complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing high pressure PVC spigot and socket,waste and ventilating pipes ISI marked including fixing with approved adhesive etc. 75 mm (seventy five milimeter) dia complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing cast iron holder balts including steel bolts to sand cast iron /cast (spun) iron pipes embeded in and including cement concrete blocks 100mm x 100mm x 100mm (one hundred into one hundred into one hundred) of 1:2:4 mix (one cement two sand four greded stone aggregate 20 mm (twenty milimeter ) nominal size ) including cost of cutting holder and making good the walls complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

75 mm Nominal diameter / size (seventy five milimeter)

100 mm Nominal diameter / size (one hundred milimeter)

Providing and fixing PVC spun fittings and accessories ccomplete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Plain Bend : (i) 75mm Nomonal Size (seventy five milimeter)

(ii) 110 mm Nomonal Size (one hundred ten milimeter)

Providing and fixing sand cast iron/ cast iron spun fitting and accessories Bends of required degree ( any radius) : with oval access door insection rubber washer 2 mm thick bolts and nutts complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

75 mm Nominal size (seventy five milimeter)

110 mm Nominal size (one hundred ten milimeter)

Providing and fixing sand cast iron/ cast iron spun fitting and accessories Single equal branch of required degree with oval access door insertion rubber washer 3 mm thick bolts and nutts complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

(i) 75 mm Nominal size(seventy five milimeter)

(ii) 100 mm Nominal size (one hundred milimeter)

Providing and fixing PVC collar complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

(i) 75 mm Nominal size(seventy five milimeter)

(ii) 110 mm Nominal size (one hundred ten milimeter)

Providing and fixing PVC cowl complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

(i) 75 mm Nominal size (seventy five milimeter)

(ii) 110 mm Nominal size (one hundred ten milimeter)

Providing lead caulked joints to pvc (spun ) iron pipes and fitting including testing of joints complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

(i) 75 mm Nominal size/diameter (seventy five milimeter)

(ii) 100 mm Nominal size / diameter (one hundred milimeter)

Providing and Fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive,cost of cutting and making good the wall and floor etc. complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.i) 110 mm X 90 mm (one hundred ten milimeter into ninety milimeter)

Providing and fixing viterous china wash down water closet (European tpye WC pan ) with intergal "P" or "S" Trap including jointing the trap with soil pipe in cement mortar 1:1 (1 Cement 1 sand ) (seat and cover to be measured and paid for sperately ) Anglo Indian (Universal closet ) (confirming to BIS specification ) complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 10.0/12.50/15.00 liters vitreous China low level flushing cistern with a pair of C.I or mild steel brackets complete with fitting such as lead valve less syphon ,15 mm (fifty milimeter) nominal size brassbal valve with polythene float C.P handle union and coupling for connection with inlet ,outlet and over flow pipes,40 mm dia (forty milimeter) C.P. flush bend including cutting holes in walls and making good the same and connection the flush bend with cistern and closet ( over flow pipe to be measured and paid for seperately ) (confirming to BIS specification) complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing plastic seat (solid / hollow type ) and cover for wash down water closet with C.P. brass hings and rubber bufferes solid type black plastic seat and cover (confirming to BIS specification ) complete with in all respect. including carriage of materials with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing vitreous china wash basin with single hole (confirming to BIS Specification ) for pillars tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fitting complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing CP brass waste for wash basin or sink 32 mm (thiry two milimeter) dia (confirming to BIS specification) complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 600mm x 450mm (six hundred into four hundred fifty milimeter ) bevelled edge miror of superior glass mounted on 6 mm (six milimeter) thick A.C sheet of plywood sheet and fixed to wooden plugs with C.P brass screws and washers (confirming to BIS specification) complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing C.P.brass towel rail complete with C.P brass brackets fixed to woden plugs with C.P brass screw. 600 x 20mm (six hundred into twelve milimeter) (confirming to BIS specification) complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 600 mm x 120 mm (six hundred into one hundred twelve ) glass shelf with C.P. brass bracket and guard rail complete fixed to wooden plugs with C.P. brass screws complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing C.P. brass bib tap with capstan head 15 mm (fifteen milimeter) dia. complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing C.P. brass pillar tap with capstan head 15 mm (fifteen milimeter) dia (confirming to BIS Specification ) complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing C.P. stop cocks 15 mm (fifteen milimeter) dia (confirming to BIS Specification ) complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing PVC connection pipe with brass union 45 cm (forty five centimeter) lenth 15 mm (fifteen milimeter) nominal bor (confirming to BIS Specification ) complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing brass full way valve with wheel complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

i) 15 mm Nominal bore.(fifteen milimeter)

ii) 20 mm Nominal bore (twenty milimeter)

Providing and fixing stone wire gully trap grad -" A" complete with C.I. grating ,brick masonary chamber in cement mortar 1:5 and water tight C.I. cover with frame of size 300 x 300 mm (three hundred into three hundred) (inside) the weight of cover to be not less then 4.53 kg and frame to be not less than 2.72 kg. square mouth traps: 100 mm x 100 mm (one hundred into one hundred) size "P" type (confirming to BIS Specification ) complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Constructing man hole with RCC tob slab in 1:2:4 mix (one cement two sand four graded stone aggregate 20 mm(twenty milimeter ) nominal size ) foundation concrete 1:4:8 ( 1 cement 4: sand 8 graded stone aggregate 40 mm nominal size) inside plastering 15 mm thick with cement mortar 1:3 ( one cement three sand ) finshed with a floating coat of neat cement and including making channels in cement concrete 1:2:4 mix (one cement two sand four graded stone aggregate 20 mm (twenty milimeter) nominal size ) finished smooth complete including curring and testing (1) inside size 800 mm x 800 mm and 500 mm (eight hundred into eight hundred into five hundred milimeter) deep including C.I cover with frame (Light duty sigle seal pettern-I) 455 mm x 610 mm internal dimensions total weight of cover and frame to be not less then 38 kg ( Weight of cover 23 kg and weight of frame 15 kg) with 200 mm thick wall or brick masonary using common burnt clay building bricks in cement mortar 1 :3 (one cement three sand ) complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 15mm (fifteen milimeter) mixer of kitchen sink with top/botum swining spout. complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing wall mixing faucet for shower and bath hand shower with angular and rest holder.complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing M.I. union for wash basin or sink 32 mm (thirty two milimeter) dia complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing C.P. botal trap for wash basin and sink 32 mm (thirty two milimeter) dia complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing 100 mm (one hundred milimeter) sand cast iron grating for gully,floor or nahni trap.complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing Toilet Paper holder C.P. Brass complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixin PTMT jet spray of approved quality and color with 1.5 metre (one point five meter) tube. complete with in all respect.with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing vitreous china padestal for wash basin complete recessed at the back for the reception of pipes and fitting. complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

i) 110 mm dia (one hundred ten milimeter)

ii) 75 mm dia (seventy five milimeter)

Providing and fixing Soap dish including accessories complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing brass tee 1620 complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

Providing and fixing G.I Union complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

i)15 mm dia (fifteen milimeter)

i)20 mm dia (twenty milimeter)

Providing and fixing TEE complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

i)15 mm dia (fifteen milimeter)

i)20 mm dia (twenty milimeter)

Providing and fixing Elbow complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

i)15 mm dia (fifteen milimeter)

i)20 mm dia (twenty milimeter)

Providing and fixing Nipple complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

i)15 mm dia (fifteen milimeter)

i)20 mm dia (twenty milimeter)

Providing and fixing cast iron cover with frame light duty rectangular single seal pattern inernal dimension 455 mm x 610 mm (four hundred fifity five milimeter into six hundred ten milimeter) total weight cover and frame to be not less than 38 kg (thirty eight kiligram) complete with in all respect.including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.

SURESH PAL

Naresh Kumar

SHIV RAM

Suket Construction Co. Pvt. Ltd.