Supply installation testing and commissioning of VT p sets at Kharka RWS scheme Gumla and Repairing of 60 HP CF and VT p set Renovation at multi village Water Supply Scheme Ramrekha (Simdega)

supplying, installation and commissioning of one VT pump set having discharge 36 m3/hr head of 20 meter ,S/F C/F Pump set having discharge 34 m3/hr head of 84 meter , Motor Control panel,3T triple chain pully and other allied work at Kharka rural water supply scheme Gumla

Mechanical & Electrical Work at WTP

Suply, installation, testing and commisssioning of Horizontal Split Casing Centrifugal Pump [make: Kirloskar/Jyoti/ Worthington/ Mather & Platt] , capable of discharging 34 m^3/hr flow against required Head-84M. mounted on common base plate and coupled with TEFC, squirrel cage induction motor, rating of motor 15% more BHP than that of pump, operating on 2930 rpm, 415V, 50Hz [make:Kirloskar/ABB/ Jyoti/Crompton Greaves/BHEL] pressure gauge, required size of Motorised sluice valve and non-return valve, standard fittings etc. including construction of MS Suction and delivery header, jointing it with Suction and Delivery line by providing required MS/CI pipes, flanges,reducer and specials, nuts bolts, packings etc. including cost of contruction PCC foundation with cement sand , stone chips foundation all complete as per the requirement, standards and instruction of E/I.(Contrator will again have to check the design of motor,pump & get it approved by the Deptt.) Discharge 34 m^3/hr Head 84M ,25HP

Supply, installation, testing and commissioning of motor control panel having FASD Starter-2 nos supplying and fitting suitable for 25HP C/F Two Pump sets.

S/F 200 Amps Busbar Make-L&T /Hevells or reputed brand.

Cost for S/F of change over switch 200 amp of L&T, Havell’s make ISI mark .

Power wiring with required 16 Sq mm 3core 1.1KV, Grade unarmoured copper cables XLPE/PVC insulated unarmoured cable from Power distribution Panel (MCP) to motors, including laying on wall or on floor as where required jointing and making proper terminations, etc. all complete.

Mechanical & Electrical Work at Intake well

Supply, installation, testing and commisssioning of vertical turbine pumpsets with allied equipment as Under Vertical Turbine Pump [ Make : Kirloskar/ joyti/Worthington/ Mather & Platt]as per IS. 1710/1972, SIS of VT pumpset capable of discharging Discharging – 36M^3/HR against the total head of 20 M coupled with squirrel cage induction motor, having 20% more BHP than that of pump, opereting on 1450-1500 rpm, 415V, 50Hz, [Make; Kirloskar/ BHEL/ ABB/ Joyti/ Crompton greeves] all complete suitable discharge head, base plate & accessories such as suitable MS Column pipe flange type 60 ft spider bearing , line shaft rubber cut less bush spider with stainer ,motorised sluice valve ratio PN - 1.6 NR valve , pressure gause including cost of contruction PCC foundation with cement sand , stone chips foundation bolt nut, spring washer , plaster punning of foundation and making delivery pipe with piping works required for the job and etc all complete job , testing of pump set on full load at site.(cost of Pump,Motor etc) (Contractor will again have to check the Design of pump & motor and get it approved by the Deppt.) Discharging – 36M^3/HR and Head – 20M ,7.5HP

Supply, installation, testing and commisssioning of motor control panel having FASD Starter-2 nos suitable for 7.5 HP Two Pump sets.