SPECIAL REPAIRS TO BLDG P-03 AT AHMEDABAD

Amount

Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete.

S&F factory made 35 mm thick Flush shutters, solid core construction with decorative laminated both faces panels etc complete.

S&F 2nd hard wood 35mm thick glazed and skeleton shutters open rebated & prepared to receive, glass, gauge etc. divided into squares with plain chamfered or rounded mitred and rebated any numbers and size of members of shutters as specifed in SSR Part I, Section 8, clause 8.24(a); supllied and fitted to chowkahts complete.

S&F factory made solid PVC door, cup board shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC 'C' channel having a prelaminated PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & prrelaminated PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail, lock rail & bottom rail panelling of both side prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specification & diagram / product drawing shown on ser page No 156 of SSR Part II complete

S&F factory made solid PVC door, cup board frame size 50mmx47mm made out of 5mm prelaminated PVC sheet reinforced with MS square tube all as per specification and as per drawing shown on ser page No 150 of SSR Part II (for item 884) complete

S&F Stainless steel butt hinges medium weight 100mm long complete.

M&L for 150mm long extructed aluminium handle fabricated type complete.

S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete.

S&F Stainless steel mortice lock 6 lever for flush door of premium quality complete.

S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete.

S&F Stainless steel wire cloth 0.36mm normal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or Stainless steel wire stapples complete.

S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass including necessary channel frame work including rubber gasket and frame with wire mesh of aluminium and deco grill, aluminium beading complete.

S&F Aluminium powder coated door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock with 5mm thick tinted glass / preleminated particle board panel and making good of wall surface to match existing surface complete

S&F powder coated anodised Aluminium alloy sections sliding windows with frames Series-B (18 mm) and , 3 track sliding shutters duly fitted with & including neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements etc. complete.

S&F aluminium powder coated anodised partition wall in panels with aluminium frame and partitions of rectangular section of size 100 x 44 x 1.48mm thick fixed in position with 4.8mm thick plain glass/ 12mm thick prelaminated particle board exterior grade all fixed with 0.70mm thick glazing beading and rubber gaskit including fixing on wall and floor with suitable size of steel chromium plated screw with rowl plug complete

M&L for grill medium grade of mesh size 75mmx75mm with 6mm square Prelaminated aluminium bars fixed with suitable aluminum frame of size 37x19x2mm complete.

Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete.

M&L for Light shade vitrified ceramic tiles 10mm thick, (square or rectangular) polished,area of each tile exc 0.42 sqm but n exc 1 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:6 complete.

M&L for Light shade vitrified ceramic tiles 10mm thick, (square or rectangular) polished,area of each tile exc 0.42 sqm but n exc 1 sqm on vertical surfaces such as skirtings, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick on of brick work or concrete surfaces in cement mortar 1:4 complete

M&L for Glazed ceramic coloured tiles in vertical surface 450 x 350 x 7mm thick set and jointd in neat cement slurry and pointed in whie or coloured cement to match pigment over and including 10mm thick CM (1:4) backing coat & Tiles shall be of grade B-III as per IS-13712 (1993) of First quality complete

M & L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile exceeding 0.11 Sqm but n exceeding 0 .18 Sqm, set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors complete.

Dismantling wall and ceiling boards any thickness including cover fillets complete.

S&F designer false ceiling made of 12 mm thick gypsum board of Saint gobin or equvivalent over and including all GI grid of standard quality to hold false ceiling including 50 mm thamacol sheet over gyspsum board and two coats interior emusion of any colour over one coat of primer and two coats of acrylic putty complete.

S&F PVC false Ceiling planks type consisting of 7-9 mm thick single side decorative prelam/ wood finish PVC sheet and fixing at site on standard quality GI frame including 50 mm thick tharmacol sheet over ceiling complete.

Supply only 50 mm thick thermocol sheet complete.

Dismantling wrought iron / mild steel work of any description complete.

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe410-W (Gde-E-250) quality A complete

M&L for providing precast cement concrete louvres and jallies, 25mm thick (measured solid) type B0 1:2:4 using 12.5mm aggregate set in cement mortar 1:4, including all mouldings( including Post, lamps ) complete.

M&L for 0.5 - 1.0mm wall Paper of premium quality to decorate interior walls abrasion resistant, colour fastness complete.

Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamal paint over a coat of red oxide primer complete.

Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete.

M&L for 15mm thick rendering on external faces of brick/ concrete surfaces in CM (1:4) & finished even and smooth without using extra cement complete.

M&L for rendering 10mm thick on internal faces of brick work in CM1:6 finished even and smooth complete.

M&L for preparation of new plastered surfaces on walls and applying two coats of interior plastic Emulsion and over and incl a coat of 1.5mm average thick wall care putty complete.

M&L for preparation of newly plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete.

S&F in repairs 25 mm decorative type curtain rails with fixing decorative brackets / stops fixed complete.

M&L for 18 - 20 mm thick Granite (of any type) work (tablee rubbed and polished) in floor and like in cement mortar (1:4) including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite incl Screed bed 15mm thick in cement mortar 1:4 complete.

S&F in repair 18mm thick forex panel high dencity PVC foam board fixed with nails/ screws to frame works as in cabinets cupboards including required beading and necessary fittings and fixture etc complete.

S&F in reapair 1mm thick PVC decorative laminated sheet fixed with approved adhesives complete.

S&F in repaitrs chromium plated decorative type SS handles, 100 mm long, fixed with screws to timber frame complete.

S&F in repairs vitreous china wash basin, white, of size 545X545X180 mm excluding taps, brass coupling 32mm, bottle trap of 32mm size with 300mm long complete.

S&F in repair designer looking mirror of size 1350mmX900mm fixing on wall with brass fixing knob of size 3/4 inch to 1 inch.

S&F in repair single towel Rake of 600mm long & similar to jaquar make catalog no.aqn-7711 complete.

S&F in repair soap dish & similar to jaquar make catalog no. AKP-35731P complete.

S&F in repair health faucet spray type & similar to Make Jaquar CAT: ALD-573 complete

S&F in repair over head shower ( ABS Body & Face Plate Chrome Plated) with shower arm 200 mm dia & Round shape single flow with air effect shower & similar to jaquar CAT QHS-35497 complete.

S&F in repair hand shower ( ABS Body & Face Plate Chrome Plated) with shower arm 100 mm dia & Round shape single flow with air effect shower & similar to jaquar CAT HSH-CHR-1937 complete.

S&F in repair toilet paper holder type & similar to Make Jaquar cat CAN-1153S complete

S&F in repair glass corner shelve type & similar to Make Jaquar cat can-1173 complete

S&F in repairs fancy type Bib taps 15mm bore CP with wall flange, screwed down, screwed for iron pipe or for brass ferrule and fixed & similar to Jaquar cat part FUS -CHR-29037 complete.

S&F in repairs 2 way bib cock , fixed in 15mm bore pipe & similar to jaquar make FUS-CHR-29041 complete

S&F in repairs for wash basin mixer for mixing hot & cold water screwed down for iron pipe & fixed 15mm bore of pipe & similar to Jaquar make of catalog no. FUS-CHR-29023B complete.

S&F in repairs Wall mixer three in one kit of Hi -flow Divertor consisting of operating lever wall flange with seals and button only incl hand shower mixing hot & cold water screwed down for iron pipe & fixed 15mm bore of pipe & similar to Jaquar make CATALOG NO. FUS -CHR-29281 complete.

S&F in repairs angular stop cock with wall flange & similar to jaquar make CATALOG NO. FUS -CHR-29053 complete.

S&F in repairs, wash down water colset (wall hung type ) with seat cover of jaquar florentine or equivalent & similar to jaquar catalog no. ONS-WHT-10953BIUFSM (inlusive of brackets), to pedestal pan including all joints, trap etc complete.

S&F in repairs flushing cistern slim concealed cistern body with drain pipe connection site for wall hung & similar to Jaguar WC .CATALOG NO. JCS -WHT-2400S and flushing control plate catalog no. JCP-CHR-852415 with all accessories complete .

S&F in repairs fully glazed 12 mm thick toughened glass partition with door leaf of 600 mm with all necessary handle 250 mm, etching, pivot arrangement complete.

S&F in repairs gypsum cornice fixed ceiling with screw/ adhesive complete.

S&F 12 mm thick Medium density fibre board, exterior grade, fixed to timber framework with screws complete.

S&F in repairs 75 mm thick partition wall made of 8 mm thick high density hilex extenstion board embeded both side on GI grid of standard quality & filled with glass wool for sound proofing purpose with and including two coat of interior emulsion paint over 1.5mm average thick wall care putty on both faces complete.

Taking down carefully surface aluminium or copper point wiring (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R Y B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting modular switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall for One light point controlled by one switch

All as per item no 66 above but for One socket outlet 6 amp controlled by one switch on the same board with other switches.

All as per item no 66 above but for One socket outlet 6 amp controlled by one switch on indepdendent board.

All as per item no 66 above but for Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm for one 16 amp socket outlet controlled by one switch on independent board complete.

S&F modular switch one way 6 amp 1 module

S&F modular switch one way 16 amp 1 module

S&F modular socket 6/16 - 2/3 pin combined 2 module

S&F modular socket 6 amp 2/3 pin combined 2 module

S&F recess/ suspended LED round panel light 12 watt with powder coated rim 12 watt high efficiency designer recessed mirror optic luminary with ceiling cut out size 9 watt complete, 2700-6500K including connecting electricity to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, PF>0.95 and life> 15000 hrs & similar to Make Crompton model no LSDRSD-12W-CDL/NW/WW complete.

S&F recess/ suspended LED round panel light 06 watt with powder coated rim 06 watt high efficiency designer recessed mirror optic luminary with ceiling cut out size 9 watt complete, 2700-6500K including connecting electricity to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, PF>0.95 and life> 15000 hrs & similar to Make Crompton model no LSDRSD-6W-CDL/NW/WW complete.

S&F recess/ suspended LED round panel light 09 watt with powder coated rim 09 watt high efficiency designer recessed mirror optic luminary with ceiling cut out size 9 watt, 2700-3300K including connecting electricity to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, PF>0.95 and life> 15000 hrs & similar to Make Crompton model no LSDRSD-9W-CDL/NW/WW complete.

S&F recess/ suspended LED round panel light 15 watt with powder coated rim 15 watt high efficiency designer recessed mirror optic luminary with ceiling cut out size 12 watt, 2700-3300K including connecting electricity to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, PF>0.95 and life> 15000 hrs & similar to Make Crompton model no LSDRSD-15W-CDL/NW/WW complete.

S&F air ventilation fan 200 mm in toilet in rectangular in shape, PVC body, white colour 230V including louver shutter complete.

ALPINE CONSTRUCTIONS

DATTA SURYAKANT CHAUDHARI