CWE KOTA/ALW-36 OF 2020-21 SPECIAL REPAIR TO TOILETS AND BATHROOMS AT ITARANA ALWAR

Amount

B/R ITEMS Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars & precast concrete mosonry etc. and removal all rubbish material complete all as specified directed.

Taking down cement or cement lime plaster any description, on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish off the premises, complete all as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level and removal all rubbish material complete all as directed..

Demolition of reinforced cement concrete in landing slab, chullah hoods, manhole covers, Roofs, Floors, beams, stair case, landing, chajja and similar suspended work complete all as specified and directed.

Dismantling of cement concrete tiles in floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal complete all as specified and directed :-

15mm bore.

20mm bore.

25mm bore.

32mm bore.

40mm bore.

Taking down door & window, ventilator chowkhats or frames with shutters (without taking off shutters from frame)n exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as directed.

Taking down door and window chowkhats or frame exc. 1 sqm but n exc. 2 sqm each complete all as directed.

Dismantling water tank of capacity not exceeding 1000 Ltrs and removal from site complete all as specified and directed .

Excavation in trenches n. exc 1.5 metre wide and not exceeding 1.5 m deep for foundations, laying under ground cables etc and getting out in soft/ loose soil, complete, all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick,complete, all as specified & directed.

Removal of excavated surplus spoil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point,complete, all as specified and directed .

M & L 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in bedding layer of floor and roof finisehd the surface even and fair complete all as specified and directed.

M & L for PCC (1:5:10) type E-2 for sunken filling, foundations, filling and mass-concrete, complete all as specified and directed.

S & F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks galvanised wire staples to wooden frames with beading complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 as in ceiling of roof slab, sunken floor, top of roof slab and chajjas, finished even and smooth complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair face of brick masonry surface or on stone masonry surfaces in two layer first layer of 10mm thick in CM 1:6 and 2nd layer 5mm thick in CM 1:4 finished even and smooth without using extra cement mixed with liquid water proofing admixture as per manufacturer instructions, complete all as specified and directed. Note:- Liquid water proofing admixture shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair face of brickwork, masonry wall surfaces or on stone masonry surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparing old plastered or unplastered walls surfaces and applying two coats of white wash complete all as specified and directed.

M & L for preparing old plastered or unplastered ceiling surfaces and applying two coats of white wash complete all as specified and directed.

M & L for preparing new plastered or unplastered on walls etc surfaces and applying two coats of cement based paint over a coat of white wash complete all as specified and directed.

M & L for preparation of previously treated surfaces/ old surfaces of wall and applying one coat of cement based paint on old surfaces of wall, complete all as specified and directed.

M&L 300x450x7mm thick joint free glazed ceramic coloured tiles as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering in cement sand mortar 1:3 complete all as specified and directed.

M&L 300x3000x7mm thick non-skid ceramic coloured tiles as in floors such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick rendering in cement sand mortar 1:6 complete all as specified and directed.

S &F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with mild steel square tube fixing in opening complete all as per specifications and drawings as applicable to item 08095 given in SSR Part – II (2010).

M & L for brick work with FLY ASH BRICKS straight or curved on plan exc 6 mean radius, built in CM 1:6 complete, all as specified & directed.

M & L for brick work with FLY ASH BRICKS straight or curved on plan to any radius , built in CM 1:4 as in half brick wall complete, all as specified & directed.

M & L for brick work with FLY ASH BRICKS (As per IS-13757 -1993) burnt clay fly ash building bricks) (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent brick 10mm over UG calbe for protection complete all as directed.

M&L for dry sand and punning for cushioning to under ground cable complete all as specified and directed. Note : For the purpose of payment only punned thickness shall be measured.

M&L 18-20mm thick granite slab/tiles (of any type table rubbed and polished) in steps, jambs pillars, window cills, cooking platforms and like set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over screed bed or bedding layer 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

Fixing only steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed for following sizes:-

32mm bore.

40mm bore.

S&F steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed for following sizes:-

15mm bore.

20mm bore.

25mm bore.

32mm bore.

40mm bore.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floor etc ) complete all as specified and directed for following bore:- Note : Old serviceable water tubing retrieved from taking down here-in-before shall be used. The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.

15mm bore.

20mm bore.

25mm bore.

S & F in repair 15 mm bore stop valve/angle stop valve of copper alloy, fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair 15 mm bore stop valve/angle stop valve, fancy type, chromium plated with long shank and cup (concealed type chromium plated of copper alloy screwed down high pressure with crutch or buter fly handle screwed on both ends for iron pipe or for union complete all as specified and directed.

Fixing only in repair 15 mm bore stop valve/angle stop valve of copper alloy, fancy type, (concealed type) chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S & F auto closing concealed urinal flush valve 32mm with wall flange complete all as specified and directed. Make:- Jaquar Cat Part No. PRS-073

S & F Metropole flush valves dual of 32mm size (Concealed body) with eposed shut off provision and round flange (3.0/6.0 ltr per flushing) complete all as specified and directed. Make:- Jaquar Cat Part No. FLV-1085N

S & F in repair 15 mm bore angle valves chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

Fixing only in repair 15 mm bore angle valves chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F 15mm bore PVC connections, with PTMT nuts of length 750mm complete all as specified and directed.

S&F in repairs Cast iron bends any radius, diminishing pieces or tapers (larger bore measured) complete all as directed for the following sizes:-

75mm bore.

Fixing only 75mm bore (EXCEPT BEND).

100mm bore.

Fixing only 100mm bore (EXCEPT BEND).

S&F in repair 75mm bore cast iron branch pieces, single, (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branch with oval access doors complete all as specified and directed.

S&F in repair 75mm bore cast iron branch pieces (EXCEPT BEND), single, (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branch with oval access doors complete all as specified and directed.

S&F in repair 100mm bore cast iron branch pieces, single, (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branch with oval access doors complete all as specified and directed.

Fixing only in repair 100mm bore cast iron branch pieces (EXCEPT BEND), single, (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branch with oval access doors complete all as specified and directed.

S & F in repair 100mm bore cast iron(sand cast), soil, waste and vent pipe in any length with or without ears with cement joints, laid in floors/trench complete all as specified and directed.

Fixing only in repair 100mm bore cast iron(sand cast), (EXCEPT PIPE) soil, waste and vent pipe in any length with or without ears with cement joints, laid in floors/trench complete all as specified and directed.

S & F in repair 75mm bore cast iron(sand cast), soil, waste and vent pipe in any length with or without ears with cement joints, laid in floors/trench complete all as specified and directed.

Fixing only in repair 75mm bore cast iron(sand cast), (EXCEPT PIPE) soil, waste and vent pipe in any length with or without ears with cement joints, laid in floors/trench complete all as specified and directed.

S & F in repairs 100mm dia floor trap cast iron, with grating including jointing to waste pipe fixed in cement concrete type 1:2:4 B1 type, complete all as specified and directed.

Fixing only in repairs 100mm dia floor trap cast iron (EXCEPT TRAP), with grating including jointing to waste pipe fixed in cement concrete type 1:2:4 B1 type, complete all as specified and directed.

S & F in repairs 75mm dia Nahani trap cast iron, with grating including jointing to waste pipe fixed in cement concrete type 1:2:4 B1 type, complete all as specified and directed.

S & F in repairs 75mm dia Nahani trap cast iron (EXCPT TRAP), with grating including jointing to waste pipe fixed in cement concrete type 1:2:4 B1 type, complete all as specified and directed.

S&F in repairs vitreous China squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests and 'P' or 'S' trap, including provision of cement concrete bedding, connection to trap and flushing pipe etc. complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed .

Fixing only in repair water closet (Squatt pattern) complete including provision of lime concrete bedding, complete all as specified and directed.

Demolition of old existing unserviceable EWC seat and S & F vitrous China Wash Down Water closet pan (EWC) white ISI marked including connection to drain (or outgoing pipe) and to flushing pipe antisyphonage pipe etc. & with plastic WC seat cover (White) closed pattern complete all as specified and directed.

Fixing only in repair wash down water closet (Perstal pattern), complete all as specified and directed.

S&F PVC low level flushing cistern10 litre capacity with intel ball valve float & handle, syphonic action type including brackets & flush pipe of polythylene of low or high density or PVC 32mm dia for LLFC fixed complete all as specified and directed .

Fixing only in repairs PVC low level flushing cistern10 litre capacity with intel ball valve float & handle, syphonic action type including brackets & flush pipe of polythylene of low or high density or PVC 32mm dia for LLFC fixed complete all as specified and directed .

S&F in repairs Vitreous china bowl urinal flat back, size of 465 X 355 X 265 mm white with grating and union for discharge pipe including, waste pipe and PVC connection, bedding urinal against wall in cement mortar 1:2 securing urinal to, plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

Fixed in repairs vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed

S & F in repair 15 mm bore pillar taps, cast copper alloy chromium plated with capstan head screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repair for gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 20mm dia complete all as specified and directed.

S & F in repair for gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 40mm dia complete all as specified and directed.

Fixing only in repair for gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 20mm dia complete all as specified and directed.

S & F in repair 32mm bore waste fittings incl waste pipe, brass, chromium plated for glazed were sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

M&L for framed work using angle iron, round bars as in grills, gratings, security doors or gates with end of bars shouldered and or rivetted or forged into spikes guard bars barred into iron doors, ladders, walkways railing framework of water troughm cooler stand and similar work conforming to FE-290 Gde E-195 complete all as specified and directed.

S&F for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L preparation old or previously steel over 10 cm width or girth and applying two coats of synthetic enamel paint of 1st grade quality over a coat of primer complete all as specified and directed.

M & L for preparation of old or previously treated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade complete all as specified and directed.

S & F 100mm stainless steel butt hinges heavy weight ISI marked complete all as specified and directed.

S & F in repairs 100mm stainless steel butt hinges heavy weight ISI marked complete all as specified and directed.

S & F 100mm extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed type B-21, ISI marked complete all as specified and directed.

S & F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S & F in repair 150mm long aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S&F in repairs 150mm size extruded aluminium handle, cast type anodised complete all as specified and directed.

S&F 150mm size extruded aluminium handle, cast type anodised complete all as specified and directed.

M & L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 ( 1 cement; 4 coarse sand) furrowing the under layer with scatching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note:- Payment for providing grooves shall be made separetely.

M & L for forming groove of size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed.

S & F factory made steel ventilator top hung shutters including projecting type hinges with steel handles & steel pag stay complete (with glazing bars), dovetailed or welded including fixing of lugs in PCC 1:2:4, type B-1, using 20mm graded stone aggregate & making good walls & cills to match the existing and including one coat of red oxide/ zinc chrome primer complete all as specified and directed.

S&F rotational moulded polythylene water tanks triple layers (Cylindrical vertical with closed top) of any capacity and fixed in same position capacity of tank in 1000 Ltrs and including all necessary fittings complete all as specified and directed.

Fixing only in repair rotational moulded polythylene water tanks triple layers (Cylindrical vertical with closed top) of any capacity and fixed in same position capacity of tank in 2000 Ltrs and including all necessary fittings complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position incl cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. complete all as specified and directed.

M&L for padding in PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) iaid to a minimum consolidated thicknes 50mm to provide finished slope 1:30 complete all as specified and directed.

M & L WPT to RCC Roof slab/sunken portion, S & F APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.5 Kg/Sqm of make super thermolay manufactured by STP Ltd or ‘Hyper Plas’ (Polyster) manufactured by M/S IWL Ltd or ‘Shaliplas’ (polyester) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt (weighing not less than 150 gm/Sqm), with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd} at the rate of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions, complete all as specified and as directed. Note :- (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 30/40 confirming to IS-73, [email protected] Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.40 Kg/Sqm. (ii) Polymeric membrane shall be taken to a height of 60cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimeny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen. (v) Exposed surfaces of APP membrane shall be applied with one coat of bituminous aluminium paint @ 150 ml/Sqm. (vi) Above aspects are deemed to be included in quoted rate.

S&F in repairs brass chromium plated shower rose fancy type 125mm size fixed to 15mm GI steel pipe or union complete all as specified and directed.

Fixing only in repairs brass chromium plated shower rose fancy type 125mm size fixed to 15mm GI steel pipe or union complete all as specified and directed.

M & L cutting and punning in brick walls for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n exc 10 cm girth complete all as directed.

S & F in repairs 125mm dia grating doom with waste hole of PTMT (Min wt 40 gms), complete all as specified and directed.

S & F in repairs counter type wash basin, white, flat back, size 580 x 450 mm including one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed complete including cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

S&F in repair 15mm dia bib tap cast copper alloy fancy type half turn with wall flange chromium plated with capstan head screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Fixing only in repair 15mm dia bib tap cast copper alloy fancy type half turn with wall flange chromium plated with capstan head screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair brass chromium plated tubular towel rail, 20mm dia, “D” type, 60cm long between flanges, fixed with chromium plated brass screws including a pair of CP brass brackets complete all as specified and directed.

Fixing only in repair brass chromium plated tubular towel rail, 20mm dia, “D” type, 60cm long between flanges, fixed with chromium plated brass screws including a pair of CP brass brackets complete all as specified and directed.

S & F 3mm thick figured glass, pin head type and glazing with oil putty in square n exc. 0.50 sqm in each pane, complete all as specified and directed.

S & F in repair 3mm thick figured glass, pin head type and glazing with oil putty in square n exc. 0.50 sqm in each pane, complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all specified and as directed.

S & F Factory made solid PVC moulded door shutter, 28 to 30 mm thick (style), with 2, 4 or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face including particle board core, supplying and fixing in frame at site as all as per specifications and drawings as applicable to item 08101 given in SSR Part – II.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppy and fixing in the frame at site complete all as per specifications and drawings as applicable to item 08080 given in SSR Part – II.

E/M ITEMS Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including teak wood battens/PVC casing caping and making good disturbed surfaces of walls, floors & ceiling etc.including dismentling of fittings to match with existing surfaces, complete all as specified and directed.

M & L for point wiring complete with 1.5 Sqmm single core unsheathed stranded copper conductor cable of 1100 volts grade PVC insulated and unsheathed FRLS cable enclosed in and including PVC casing and capping not less than 20mm width with MS sheet metal sunken switch/terminal box 1.2mm thick and phenolic laminated sheet cover 3.0mm thick and brass screws with cup washers with all necessary wall cutting and making good distrubted surface as directed, including all necessay wall cutting and making good disturbed surface including 1.5 Sq.mm solid copper conductor with green PVC FRLS insulated unsheathed earth continuity conductor to common earth & connecting to earth dolly for the following:-

One light point controlled by one, one way switch

One 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

One 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per description of serial Item No. 107.00 above but for one 3 pin socket outlet 15/16 Amps with 2.50 sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 volt grade including 2.50 sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 volt grade as continuous earth wire in green colour complete all as specified and directed.

S & F switch piano flush type 5/6 Amps single pole one way 230 volts complete all as specified and directed.

S & F switch piano flush type 15 Amps single pole one way 230 volts complete all as specified and directed.

S & F, socket outlet 3 pin(with 2 pin outlet also), 5/6 Amp flush type, 240 volts all as specified & directed.

S&F socket outlet two-in-one, 3 pin, 5 Amp and 15 Amp, flush type , 240 Volt complete all as specified & directed.

S & F ceiling rose surface bakelite 65x50mm with two or three terminal complete all as specified and directed.

S&F decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 16W to 20W with LED tube of model E-LITE LED pride and connecting up with the fitting from ceiling rose/connector using copper flexible cord of size 1.5sqmm, 3 core of suitable length complete all as specified and directed. Make :- Havelles Cat Part No LHEXBHP71N1W018 or equivalent of Philips/Cromption Greaves/Bajaj/Wipro/GE.

S & F for lamp holder, PVC/polycarbonate type with back plate suitable for battern fittings complete all as specified and directed.

Supply and fixing Adore LED lamps of 9/10 Watt and including taking down old u/s CFL lamp complete all as specified and directed. Make - Cat Part No LHLDERHEML8X010 of make Havells or equivalent model of make Philips/Cromptom/ Greaves/Wipro/ Bajaj

S & F sheet metal enclosure double door DB SPN 8 way, 240 volts protection class IP-43 made out of CRCA mild steel sheet surface with epoxy powder coated surface confirming to IS-13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity all as specified and directed.

S & F MCB SPN 63 Amps, 240 volts, B-curve, rupturing capacity 10KA conforming to IEC-60898, Part-I, complete, all as specified & directed.

S & F MCB SP 6 to 32 Amps, 240 volts, B-curve, rupturing capacity 10KA conforming to IEC-60898, Part-I complete, all as specified & directed.

S & F second class hardwood rectangular block open recessed of size 30cm x 25cm x 5 cm depth with 3 mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug (4 Nos) complete all as directed.

Supply and fixing LED type street DRACO Series , light luminaire 20 Watt 230 V, 50 Hz and including all necessary fitting accessories and LED complete all as specified and directed. Make:- Cat Part No LTESS20WLED of make C & S or equivalent model of make Crompton/ Greaves/Wipro

Supply / Lying, jointing and testing XLPE insulated armoured heavy duty LT under ground cable with aluminium stranded conductor, 1100 volts grade cross sectional area 16 Sqmm 2 core laid in trenches/ ducts/ through pipes, under floors or roads/along poles etc complete all as specified and directed. Note :- Sand cushioning, Cable protection, GI protection pipe, Clamps, Jointing kits and Excavation & Earth work shall be measured & paid for separately.

S & F for submain wiring with 2 single core PVC insulated & PVC unsheathed FRLS cable 1100 Volt grade with 06 Sqmm copper multistranded conductor drawn through and including PVC conduit/casing-caping fixed on surface to wall/ ceiling by means of MS screws and saddles including one run of 6 Sqmm single core multistranded copper conductor 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth and connecting to earth dolly and including taking down old u/s sub main wiring complete all as specified and directed. Note: - Two runs of main cable, one run of earth continuity conductor and one run of conduit/casing-caping will be measured and paid as one length only.

M & L for 40mm bore GI Pipe (Light Grade) for protection of LT cable fixed to walls/ poles/ road crossing including clamps complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600x 600 x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M deep below normal ground level and connected to galvanised iron earth wire 4mm dia by means of bolts, nuts, checknuts and washers of GI or steel all as shown in electrical plate No 3 of SSR Part-I 2009 and connection to main switch board / Test point /panel /equipment all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, returning, filling in and removal of surplus soil to a distance n exc 50 M, Charcoal and Salt in alternate layer 15cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20mm dia for watering and 15 mm dia 3 M long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25mm x 3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1 40mm thick precast RCC pit cover1:2:4 type B1 shall be provided on CI frame etc complete, all as specified & directed.

Radha Enterprises

M/s S Amarjit Singh