Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹38.9 L
EMD Value
₹77,800
Closing Date
20 Dec 2025, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
XEN PWD REASI
XEN PWD REASI
CONSTRUCTION OF FOOTBRIDGE AT BAGANSAL TO BLANGI OVER SACH NALLAH BLOCK JIJ, BAGLI UNDER DISTRICT CAPEX 3rd Call
2025_PWDJK_297497_1
Fresh e-NIT No. 64 of 2025-26 Dated 06-12-2025
Open Tender
Civil Works
Percentage
365 days
Reasi
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
XEN PWD REASI
₹77,800
6 Dec 2025
6 Dec 2025
22 Dec 2025
6 Dec 2025
20 Dec 2025
6 Dec 2025
6 Dec 2025 - 20 Dec 2025
All kinds of soils 75%
Ordinary Rock 20%
Hard Rock (Blasting Prohibited) 5%
Hand packed stone filling including cost of stone behind R/wall
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal) crushed
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforcement of R.C.C work including straightening, cutting, bending, placing in position and binding all complete with HYSD High Yield Strength Deformed Bars.
Hand packed stone filling including cost of stone behind R/wall
Foundations, footings, bases of columns etc. for mass concrete
Columns, pillars, piers, abutments, posts and struts.
Providing weep holes in Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing face. Complete as per drawing and Technical Specifications.
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded sections.
Providing and fixing of Elastromeric bearing as per designer specification to take design load including all fixtures
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete on steel work
Sand average lead 12km
Stone aggregates below 40mm average lead 50 km
Stone aggregates below 40mm
Stone for an av distance 250Mtr by HL
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.28 MB
BOQ_964216.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .