Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.3 CrAccepted-AOC MAHESGOTE KRISHNAPUR ROAD NEW TOWN 24 PGS N KOLKATA 700102 | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700102 | ₹1.3 Cr | L1 | Accepted-AOC Quoted Lowest Amount |
| 2 | L2₹1.3 CrRejected-Finance RGM AS 07 BL KA TARULA RAMKRISHNA PALLY RAJBANSI PARA NEWTOWN KOLKATA 700102 | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700102 | ₹1.3 Cr | L2 | Rejected-Finance Quoted Higher Amount |
| 3 | L3₹1.3 CrRejected-Finance 26 1 BRINDABAN PAL LANE BAGBAZAR KOLKATA 700003 | KOLKATA | KOLKATA | WEST BENGAL | 700003 | ₹1.3 Cr | L3 | Rejected-Finance Quoted Higher Amount |
Tender Value
₹1.3 Cr
EMD Value
₹2.5 L
Closing Date
20 Jun 2025, 12:00 pmClosed
Regional Manager, Bidhannagar Region, WBSEDCL.
Bidhannagar Regional Office, WBSEDCL, Finance Centre, 2nd Floor, Action Area-II, CBD-I, Newtown, Kolkata-700156.
System improvement work by drawl of HT and LT line with installation of Shunt Trip Switchgear RMU DTR LT Kiosk FPB DB etc. at DC BLOCK of New Town CCC-I under New Town Division.
2025_WBSED_851180_1
BNRO/E-TENDER/E/2025-26/01 Dated 23/05/2025
Open Tender
Electrical Work/ Equipment
120 days
DC Block, AA-I, Newtown
Refer to NIT
2 documents required · 2 mandatory
₹0
₹2.5 L
Bidhannagar Regional Office, WBSEDCL
17 Feb 2026
29 May 2025
23 Jun 2025
29 May 2025
20 Jun 2025
29 May 2025
4 Jun 2025
Amount
Excavation of soil for formation of cable trenches & Re-instatement of the same cable trenches with the excavated soil as per instruction of site engineer. (For 4 run)
Excavation of soil along the existing cable route for formation of cable trench along with uprooting of protective cover in the existing trench & reisnstatement of the same for laying of 11 KV, 3C X 400 sq.mm. XLPE Cable in single trench as per instruction of Site Engineer
Excavation of soil by cutting metalled Road/Cement concrete/Brick masonary/chequered plate/ paver block etc for formation of cable trench along with uprooting of protective cover in the existing trench & Re-instatement of the same cable trench after erection of protective cover.
Laying of HDPE pipe(with 110mm diam. PE-80, PN-6) as per jack push method as per instruction of site engineer and as per site condition for laying of UG cable including supply of HDPE pipe as per IS: 4984-1995
Laying of HDPE pipe(with 160mm diam. PE-80, PN-6) as per Microtunnelling method as per instruction of site engineer and excluding rate of cable laying & dressing.
Supply & Laying of Kiln-Burnt 1st class brick having proper size & shape as per instruction of site engineer.
Cable Laying & dressing of 11KV 3Cx95sq.mm. XLPE Cable in the excavated cable trenchs as per drawing no. PLN(D)/SS/104 Dated 05.05.2015 and instruction of the site engineer.
Cable Laying & dressing of 1.1KV 1Cx630sq.mm. XLPE Cable in the excavated cable trenchs as per drawing no. PLN(D)/SS/105 Dated 05.05.2015 and instruction of the site engineer. (More than2 cables in a trench)
Cable Laying & dressing of 1.1KV 4Cx400sq.mm. XLPE Cable in the excavated cable trenchs as per drawing no. PLN(D)/SS/104 Dated 05.05.2015 and instruction of the site engineer.
Cable Laying & dressing of 1.1KV 4Cx185sq.mm. XLPE Cable in the excavated cable trenchs as per drawing no. PLN(D)/SS/104 Dated 05.05.2015 and instruction of the site engineer.
Supply & Making of End termination Joint suitable for 1.1 KV,1CX630 Sq.mm XLPE cable
Supply & Making of End termination Joint suitable for 1.1 KV,4CX400 Sq.mm XLPE cable
Supply & Making of End termination Joint suitable for 1.1 KV,4CX185 Sq.mm XLPE cable
Supply & Making of Straight Through Joint suitable for 1.1KV 4Cx400sq.mm. XLPE Cable
Supply & Making of Straight Through Joint suitable for 1.1KV 4Cx185sq.mm. XLPE Cable
Supply & Making of End termination Joint suitable for 1.1 KV,4CX120 Sq.mm XLPE cable
Supply & Making of End termination Joint suitable for 1.1 KV,4CX50 Sq.mm XLPE cable
Supply & Making of End termination Joint suitable for 1.1 KV,4CX25 Sq.mm XLPE cable
Supply & Making of (O/D) End termination Joint suitable for 11 KV,3CX95 Sq.mm XLPE cable
Supply & installation of Feeder pillar Box with making of cement concrete foundation
Supply & installation of New Feeder pillar Box with Dismantling of the old Feeder pillar box and return to store
Dismantling of the old Feeder pillar box and return to store with Demolishing of existing plinth of Feeder Pilar Box
Supply & installation of Distribution Box with making of cement concrete foundation
Erection of LT Kiosk with making of cement concrete foundation
Erection of RMU with making of cement concrete foundation of RMU & FRTU
Erection of 630KVA DTR with making of cement concrete foundation of DTR
Supply and fixing of cable tag on the cable
Supply & Erection of CONCREAT Cable Marker
FIXING OF CAUTION BOARD
Earthing arrangement for Dist. Transformer ( Neutral )
Earthing arrangement for Dist. Transformer ( Body )
Dismantling and Returan to store, 315 KVA dtr
Earthing arrangement for RMU ( Body )
MAKING OF EARTHING ARRANGEMENT BY G.I EARTH SPIKE
Supply & Fixing of Adopter Box including necessary arrangemet, connection for addition of one 11KV new Single Panel VCB with the existing 11KV Panels at NT ID 132 KV GSS
Laying & jointing of 1.1KV 4C x 2.5 sq. mm Copper Control cable with Supply of Cable Lugs, glands, tapes, sockets etc
Laying & jointing of 1.1KV 8C x 2.5 sq. mm Copper Control cable with Supply of Cable Lugs, glands, tapes, sockets etc
Erection of SCADA 350MVA800/1250A IN0BC0OG1 switchgear at NT ID 132 KV GSS
Excavation of soil for making of trial hole as per instruction of the site engineer including backfilling the excavated soil ( 12 nos (L)3 x 0.75(W) x 1.2M depth)
Laying & dressing of single run 11 KV, 3C X 400 sq.mm. XLPE Cable in excavated cable trench as per Drg. No. PNL(D) SS/105, Dt. 05.05.2015 as per instruction of Site Engineer where brick protection is required
Laying & dressing of single run 11 KV, 3C X 400 sq.mm. XLPE Cable in the microtunneling HDPE Pipe as per instruction of Site Engineer and where brick protection is not required
Supply & Making of Straight through joint including making of jointing pit for 11 KV, 3C X 400 sq.mm. XLPE Cable
Making of protective duct for cable joint complete as per WBSEDCL's approved drawing (Ref Drg. No. PLN(D)/SS/106 Dt.05.05.2015)
Supply & Making of Indoor Type End Termination joint for 11 KV, 3C X 400 sq.mm. XLPE Cable
Earthing of 11 KV Indoor Type Switchgear at NT ID GSS with 1 nos. 3 Mtr long 50 mm dia medium gauge G.I. Tata make pipe including installation & connection in between earth pipe and other equipments using 2 nos. G.I. Flat 40mm X 6 mm by welding complete.
GIS survey as per instruction of site engineer
Laying & dressing of single run 11 KV, 3C X 300 sq.mm. XLPE Cable where brick protection is not required
Supply & Making of Straight through joint including making of jointing pit for 11 KV, 3C X 300 sq.mm. XLPE Cable
Supply & Making of Indoor Type End Termination joint for 11 KV, 3C X 300 sq.mm. XLPE Cable
MONDAL ELECTRIC CONCERN (BID ID -6573639)
Teknet Consultancy (BID ID -6568899)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid