C/o One No Type-IV Doctor residence at CHC Gadagushani in Tehsil Balichowki Distt Mandi

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.In all kind of soil including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm (twenty millimetre) nominal size including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (one cement : six coarse sand) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Centering and shuttering including strutting, propping etc. and removal of form including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . Foundations, footings, bases of columns, etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Stairs, (excluding landings) except spiralstaircases

Edges of slabs and breaks in floors and walls

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level in1:3:6 (one Cement : three coarse sand : six graded stone aggregate 40 mm (fourty millimetre) nominal size including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing up to floor five level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (one cement : three coarse sand), cost of required centering, shuttering complete.1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Second class teak wood including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 35mm (thirty five millimetre) thick including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm (thirty five millimetre) thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (one cement: six fine sand) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and applying plaster of paris putty of 2 mm (two millimetre) thickness over plastered surface to prepare the surface even and smooth complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :100x60x2.50 mm (one hundred into sixty into two point fifty millimetre) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing 300x16 mm (three hundred into sixteen millimetre) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . 150x10 mm (one hundred fifty into ten millimetre)

100x10 mm (one hundred into ten millimetre)

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete Single rubber stopper including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing 40x5 mm (fourty into five millimetre) flat iron hold fast 40 cm (fourty centimetre) long including fixing to frame with 10 mm (ten millimetre) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimetre) 1:3:6 mix (one cement : three coarse sand : six graded stone aggregate 20mm (twenty millimetre) nominal size including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm (one point twenty five millimetre) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . 20 mm dia (twenty millimetre)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing triple strip vertical type magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing bright finished brass 100 mm (one hundred millimetre) mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing powder coated telescopic drawer channels 300 mm (three hundred millimetre) long with necessary screws etc. complete as per directions of Engineer- in-charge including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I (exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm (two millimetre) thick of approved brand (fittings to be paid separately).Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm thick confirming to IS:14587 including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing cup board shutters 25 mm (twenty five millimetre) thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm x12 mm (twenty five into tweleve millimetre) ( thick with necessary screws and bright finished stainless steel piano hinges, complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . 125 mm (one hundred twenty five millimetre)

100 mm (one hundred millimetre)

75 mm (seventy five millimetre)

Providing and laying vitrified floor tiles in sizes 600x600 mm (six hundred into six hundred millimetre) (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).6 mm (six millimetre) thick Cement bonded wood particle board as per IS:14276 including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Kota stone slabs 20 mm (twenty millimetre) thick in risers of steps, skirting, dado and pillars laid on 12 mm (twelve millimetre) (average) thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm (eight millimetre) diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing ridges or hips of width 60 cm (sixty centimetre) overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm (eight millimetre) dia G.I. limpet and bitumen washers complete..0.63 mm (ziro point sixty three millimetre) thick with zinc coating not less than 275 gm/ m including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing valleys of 90 cm (ninty centimetre) wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm (eight millimetre) dia G.I. limpet and bitumen washers complete :1.60 mm (one point sixty) thick with zinc coating not less than 350 gm/ m including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing 15 cm (fifteen centimetre) wide, 45 cm (fourty five centimetre) overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm (fourty into three millimetre) size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm (ziro point eighty millimetre) thick with zinc coating not less than 275 gm/m² including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing 100 mm (one hundred millimetre) diameter and 60 cm (sixty centimetre) long rain water spout in cement mortar 1:4 (one cement : four fine sand). Stone ware spout including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm (ten into ten into ten centimetre) of 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size and cost of cutting holes and making good the walls etc. :100 mm (one hundred millimetre) dia including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion, (i) Single socketed pipes including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . 110 mm (one hundred ten millimetre) diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . Single tee with door

coupler 110mm (one hundred ten millimetre)

bend 110 mm (one hundred ten millimetre)

Providing and fixing M.S. BP Sheet1.66 mm(One point sixty six milimetre) to 2mm (Two milimetre) thick in eves board/ facia/soffit/ceiling including cutting ,fixing and welding to steel roof members and applying a coat of red lead primer complete as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm (fourty millimetre) thick with 20 mm (twenty millimetre) nominal size stone aggregate including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Marble stone flooring with 18 mm (eighteen millimetre) thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Pink plain marble including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm (three hundred into three hundred millimetre) or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimetre) thick Cement Mortar 1:4 (one Cement : four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm (six hundred into six hundred millimetre) module which includes providing and fixing'C' wall angle of size 20x30x20 mm (twenty into thirty into twenty millimetre) made of 0.5 mm (ziro point five millimetre) thick pre painted steel along the perimeter of the roomwith help of nylon sleeves and wooden screws at 300mm (three hundred millimetre) center to centre, suspending the main C carrier ofsize 10x38x10 mm (ten into thirty eight into ten millimetre) made of G.I steel 0.7 mm (ziro point seven millimetre) thick fromthe soffit with help of soffit cleat 37x27x25x1.6 mm (thirty seven into twenty seven into twenty five into one point six millimetre), rawlplugs of size 38x12 mm (thirty eight into twelve millimetre) and C carrier suspension clip and main carrier bracket at 1000 mm ( one thousand millimetre) c/c. inverted triangle shaped Spring Tee having height of 24 mm (twenty four millimetre) andwidth of 34 mm (thirty four millimetre) made of Gl steel 0.45 mm (ziro point fourty five millimetre) thick is thenfixed to the main C carrier and in direction perpendicularto it at 600 mm (six hundred millimetre) centers with help of suspensionbrackets. Wherever the main C carrier and spring Thave to join, C carrier and spring T connectors have tobe used. All sections to be galvanized @ 120 gms/sqm(both side inclusive), fixing with clip in tiles into spring Twith : GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600mm (six hundred into six hundred millimetre) and 0.5 mm (ziro point five millimetre) thick with 25 mm (twenty five millimetre) height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 (sixty) microns (minimum), including factory painted after bending including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Making plinth protection 50mm (fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm (twenty millimetre) nominal size) over 75mm (seventy five millimetre) thick bed of dry brick ballast 40 mm (fourty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Brick edging 7cm (seven centimetre) wide 11.4 cm (eleven point four centimetre) deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) including grouting with cement mortar 1:4 (one cement : four fine sand) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 (twelve point five) conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (one cement : six coarse sand) :With Modular bricks including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

6 mm cement plaster of mix : In cement mortar 1:3(one cement: three sand) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm (twenty fivemillimetre) to 40 mm (fourty millimetre) thick including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked

4 mm (four millimetre) thick glass pane

Providing and fixing 16 mm (sixteen millimetre) M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing hand rail of approved size E.R.W. tubes by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing 75 mm x 62.5mm (seventy five into sixty point five millimetre) rounded hand rails in straight length complete in Stair including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm (fiffty millimetre) thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge.80 mm (eighty millimetre) thick C.C. paver block of M-30 grade with approved color design and pattern including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing 85 (eighty five ) centimetre height railing with M.S Square bars 20 (twenty millimetre) size balusters at 30 cm (thirty centimetre) Centre to centre duly welded with 2 Nos (Two Numbers) MS flat 40x6 mm (Forty into six millimetre) size and 20 (Twenty millimetre) M.S square bars lugs 10 (Ten centimetre) Long at lower end of balusters embedded in RCC steps or waist slab including prime coat of steel primer and painting with steel enamel paint other than white (Excluding handrail which should be measured and paid separatly) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc. including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm (fifteen millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 (ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimetre) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm (six hundred thirty into four hundred fifty millimetre) with a single 15 mm (fifteen millimetre) C.P. brass pillar tap including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm (fourty millimetre) C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required:White glazed fire clay kitchen sink of size 600x450x 250 mm (six hundred into four hundred fifty into two hundred fifty millimetre) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1 (one) metre long with S.S. triangular plate to Eureopean type W.C. of quality including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing CP Brass 32mm (thirty two millimetre) size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. Providing and fixing including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.flexiblepipe 32 mm (thirty two millimetre) dia including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing 100 mm (one hundred millimetre) sand cast Iron grating for gully trap including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing 600x450 mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (fourty millimetre) long screws, rawl plugs etc., complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing toilet paper holder : C.P. brass including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing soil, waste and vent pipes 100 mm (one hundred millimetre) dia 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm (ten into ten into ten centimetre) of 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size, including cost of cutting holes and making good the walls etc. :For 100 mm (one hundred millimetre) dia pipe including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing bend of required degree 100 mm (one hundred millimetre) dia Sand cast iron S&S as per IS - 1729 with access door, insertion rubber washer 3 mm thick, bolts and nuts complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm (one hundred millimetre) inlet and 100 mm (one hundred millimetre)outlet including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing PTMT liquid soap container 109 mm (one hundred nine millimetre)wide, 125 mm (one hundred twenty five millimetre) high and 112 mm (one hundred twelve millimetre) distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm (four hundred fifty millimetre) long towel rail with total length of 495 mm (four hundred ninty five millimetre) , 78 mm (seventy eight millimetre) wide and effective height of 88 mm (eighty eight millimetre), weighing not less than 170 gms including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.15 mm (fifteen millimetre) dia nominal bore including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm (twenty five to fourty millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing brass bib cock of approved quality :15 mm (fifteen millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm (fifteen millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm (fifteen millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15mm (fifteen millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm (fifteen millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm (fifteen millimetre) nominal dia including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (one cement : four coarse sand) C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (one cement : one point five Fine sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size , foundation concrete 1:5:10 (one cement : five fine sand : ten graded stone aggregate 40 mm (fourty millimeter) nominal size, inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (one cement : three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm (four hundred fifty five into six hundred ten millimetre) and 45 cm (fourty five centimetre) deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (one cement : two fine sand) including testing of joints etc. complete 450 mm (four hundred fifty millimetre) dia RCC pipes including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .

MOHAN LAL