Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.7 LAccepted-AOC 24B JYOTISH ROY ROAD KOLKATA 700053 | KOLKATA | WEST BENGAL | 700053 | L1 | Accepted-AOC Being L-1. | |
| 2 | L2₹26.9 L+₹1.9 L (7.61%)Rejected-Finance NH 31 GAIRKATA PO SAKOAJHORA DIST JALPAIGURI W B PIN 735212 | JALPAIGURI | WEST BENGAL | 735212 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹27.2 L+₹2.3 L (9.12%)Rejected-Finance DEPOPARA PO BINNAGURI PS BANARHAT DIST JALPAIGURI WEST BENGAL PIN 735 203 | JALPAIGURI | WEST BENGAL | 735203 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹28.0 L+₹3.0 L (12.1%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹28.3 L+₹3.4 L (13.4%)Rejected-Finance PO BINNAGURI DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L5 | Rejected-Finance Being L5 |
Tender Value
₹34.4 L
EMD Value
₹68,800
Closing Date
11 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH BINNAGURI
GE North Binnaguri Post Binnaguri Dist Jalpaiguri West Bengal PIN - 735232
COMPREHENSIVE SPL REPAIR TO BLDG NO 2/5/6 OF 20 MTN DIV CAMP UNDER GE (NORTH) BINNAGURI
2023_MES_574605_1
NIT No . 8701/ 57/ 2022-2023 / 02 / E8
Open Tender
Civil Works
Item Rate
180 days
BINNAGURI
Class D Category a i
8 documents required · 8 mandatory
₹500
Yes
₹68,800
Yes
16 Mar 2023
12 Jan 2023
13 Feb 2023
12 Jan 2023
11 Feb 2023
27 Jan 2023
Amount
Taking down chowkat with shutters (without taking off shutters from the frame) exc 1.5 Sqm and n. exc. 4.00sqm each and removing from site complete all as specified and as directed.
S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., size of frame 105 x60 mm complete all as specified and as directed.
M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filling hollow space of steel chowkats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.
S&F 30mm thick flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side include for the provision of suitable blocks for mortice locks, latches or other fittings etc complete all as specified and as directed.
S&F of 100 mm long Stain less steel butt hinges complete all as specified and as directed.
S&F of 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
S&F of aluminium handles cast type anodised 150mm of size complete all as specified and as directed.
M&L for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
S&F in repairs factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and as directed.
All as per item No 9 above but with out glazing bars
S&F mild steel work such as window guard bars and stairs/Ladders and similar work conforming to Fe – 290 Grade – E 165 complete all as specified and directed.
M&L for preparation of new surfaces of steel of any description over 10 cm in width or girth not otherwise described two coat of synthetic enamel paint over a coats of red oxide primer complete all as specified and directed.
M&L for preparation of old steel and iron surfaces of any description not otherwise described, over 10 Cm width or girth and applying one coat of synthetic enamel paint 1st quality complete all as specified and directed
M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wood primer complete all as specified and as directed.
Supply only sheet glass 3 mm thick ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed.
Supply only glavanized mild steel wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.
Hacking out old broken glass (any thickness,size,or description) from wooden frames or glazed with putty or fixed with wooden beads complete all as specified and as directed..
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.5 Sqm in each pane complete all as specified and as directed.
S & F in repair stainless steel wire cloth of 0.56 nominal dia wire and average width of aperture 1.18 mm fixed with stainless steel wire staples complete all as specified and directed
Taking down cement plaster on wall / Ceiling of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Demolition of brick work build in cement mortar or cement lime mortar complete all as specified and as directed.
M&L for brick work with fly ash bricks straight or curved on plain exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for rendering 5 mm thick cement plaster on ceiling surfaces cement mortar (1:3) complete all as specified and as directed.
M&L for rendering 15 mm thick cement plaster on fair face of surfaces of brick work or concrete surface in cement mortar (1:6) complete all as specified and as directed.
M&L for 15 mm thick rendering in cement mortar (1:4) on other than fair faces of brick walls or concrete surfaces in two coats first coat 10mm thick in CM 1:4 and second coat 5mm thick in CM 1:4 in mixed with water proofing compound@200 ml per bag of cement or as per manufacturer instructions, finished fair and even all complete as specified and as directed (Note: Water proofing compound shall be measured and paid separately).
Supply only water proofing compound complete all as specified and directed.
M&L for preparation of newly wall plastered surfaces and applying two coats of colour wash over a coat of white wash on brick wall or concrete surfaces complete all as specified and directed..
M&L for preparation of newly ceiling plastered surfaces and applying three coats of whitewash on wall complete all as specified and directed.
M&L for one coat of white wash on ceiling surfaces including preparation of old surfaces complete all as specified and directed.
M&L for preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty to wall surfaces complete all as specified and directed.
M&L for complete removal of old painted surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty to wall surface complete all as specified and directed.
Demolition of cement concrete (un-reinforced ) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) all as specified and as directed.
M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished fair and even without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with and including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed.
M&L for cement concrete type C2 1:3:6 (using 40 mm graded stone aggregate) 100 mm thick as sub base complete all as specified and as directed.
M&L for Machine pressed precast with grey cement and no pigment concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and as directed.
M&L for sand filling under floors or in foundations including watering and consolidation including spreading and leveling in layers n exc. 40 mm thick complete all as specified and as directed.
M&L for screed bed or bedding layer of mortar 15mm thick for laying concrete tiles in floor finishes with CM 1:6 complete all as specified and as directed.
M&L for coloured Chequered cement concrete tiles 20cmx20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors and pointed with white cements and pigments complete all as specified and as directed.
M&L for providing precast cement concrete type B1 ( 1:2:4) using 20mm graded aggregate in kerb stone set in cement mortar 1:4 complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 18-20 mm thick over 20 mm thick cement screed bed cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
Taking down tarfelt with cement plaster/pcc from roof surfaces and lowering and removing the same to a distance exc. 500m and n. exc. 2 KM including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed.
M&L for 10 mm thick Screed bed or bedding layer in CM 1:4 in order to maintain proper slope over existing roof surface with water proofing compound @200 ml by weight of cement finished even and smooth with out using extra cement complete all as specified and as directed (Note : - WPC shall be measured and paid separately)
M&L for cutting out cracks to 'V' section (shape) in existing roof slab terracing cleaning out and filling solidly with cement and sand mortar (1:1) complete all as specified and as directed.
M&L for water proofing treatment to RCC roof slab including parapet comprising of the following course treatment/specified from bottom to top:- (a) Applying bituminous primer @0.4 ltr/Sqm over plastered surfaces of roof including parapet surfaces over the priming coat laying one layer APP based polymeric membrane of approved manufacturer, 3mm thick of weight not less than 3.60 Kg /Sqm reinforced with non woven polyester fabric weight not less than 160 gms/Sqm Edges of APP membrane shall be inserted to vertical surfaces of wall as per relevant IS or as per manufacturer instructions polymeric membrane shall be taken to a height of 60 cm(minimum) and then inserted in side the groove of parapet wall and shall be finished by a membrane flashing (b) Application of Two coats of bituminous aluminium paint over the polymeric membrane after necessary preparation and cleaning.
M&L for cutting chases,pinning in making good to facing and pointing to in cement mortar 1:3 to ends of sunshades etc. and making good n.exc 10 cm width or girth complete all as specified and as directed
S&F for steel work in tubular trusses MS pipes in vertical column,purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161 of 1979 grade st 240 with one shop coat complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
ELECTRIFICATION Taking down carefully old/unsv copper/alluminium any type of point wiring for one light, socket, fan, bell or power etc including all fittings such as switches sockets, holders, light fittings, fan regulators, call bell etc and making good the disturbed surface of wall ceiling complete all as specified and directed.
M&L for concealed Point wiring including cutting and chasing on wall / roof surface controlled by one switch with 1.50 Sqmm (nominal area) FRLS, PVC insulated 1100 volts grade multi stranded copper conductor single core unsheathed cable and FRLS, ISI marked, PVC insulated 1100 volts grade multi stranded copper conductor single core of size 1.50 Sqmm as earth continuity conductor connected to common earth dolly, not less than 1.5mm thick, drawn through in and including rigid PVC conduit (Medium Grade) of suitable size, with all fittings, ISI marked and accessories, the pipe shall be fixed with clamping and shadle including provision of mild steel terminal boxes/Sunken boxes of suitable size made with 1.22 mm thick mild steel sheet recessed in wall with a coat of black bituminous paint and providing of with 3mm thick bakelite/PVC sheet ISI marked top cover , suitable for fixing of switches / sockets / regulators etc. fixed in recess of wall with brass chromium plated screws and cap washer complete all as specified and directed for the following :-
As per Ser No 49 but for One light point controlled by one way switch 5/6 amps.
As per Ser No 49 but for One ceiling fan/Exhaust fan point controlled by one way switch 5/6 amps.
As per Ser No 49 but for One socket out let 5/6 amps point on the independent board
As per Ser No 49 but for One socket out let 5/6 amps point on the same board
All as per item No 49 above but wiring with 2.5 sq mm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and as directed.
S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed.
S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed.
S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and directed
S&F Switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with, complete all as specified and directed.
S&F in ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed
S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and directed
S&F LED white glass Lamp 1x9 Watt 230V Base-22 complete all as specified and directed (Make: Surya/Havells/Philips/CG).
S & F in deluxe fan Electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and directed
S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaries efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified
S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaries efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified
Taking down carefully Ceiling fan after disconnecting electric connection and refixing with and including necessary paint and minor repair complete all as specified and directed
M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core cable of working voltage 1100 volts grade with stranded copper conductor including one run of 4 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non- metallic conduit of suitable dia with and including taking down unsv sub main, complete all as specified and as directed. NOTE : (i) Two run of submain wiring cable alongwith one run of earth wire with and including PVC conduit pipe shall be measured as one unit length.
M & L for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incoming cables, fixed with nuts & bolts & front side openable with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer (spray paint) with minimum dimensions (90 x 75 x 20 cm ) flush to wall for incorporating 01 No TPN DB, 04 Nos electronic meters etc complete all as specified and as directed.
S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, 415Volt IP-20 protection suitable for fixing MCB"S/lsolators with and including taking down old one complete all as specified and directed.
S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete with and including taking down old unsv one all as specified and directed
S&F MCB, Triple pole & neutral 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed.
S&F MCB, Single pole & neutral, 35 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unsv one as specified and as directed
S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unsv one as specified and as directed
Disconnecting and removing unserviceable building security light fitting of any type from bldg and Supply and fixing new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening separate driver compartment with IP 66 protection and impact resistance of IK07system of not less than 25 Watts IP 66 type including standard fittings pressure die cast aluminium housing, heat resistant toughened glass, epoxy powder coated finish complete with Electronic driver, Surge protector not less than 5 KV ,bracket made out of GI pipe light grade 32 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling, hole, fixing with nuts bolts and washers including painted and all accessories duly prewired complete all as specified and directed.
Material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick buried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, check nuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, including necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 5 of SSR Part- I including testing on completion all as directed and as specified.
samrat saw mill and joinery workshop
M/S MOHAN KUMAR BANSAL
M/S S.K. CONSTRUCTION
L. B. SHARMA
SG ENTERPRISE
NARAYAN MAJUMDER
N K Construction
BIG BEN ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .