NIT No. 006/TC/EinC/PWD/26-27

Hectare

Granular Sub-base as per Table:- 400-1 Construction of granular sub-base by providing graded Material, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401 Plant mix method (with Mechanically crushed stone only) (b) For Lower Sub-base with (i) Grading-V Material

For Sub-base cum drainage layer or upper sub-base with (i) Grading-III Material

Meter

Construction of RCC open drain with width 1.0m or 0.8 m (inside dimension) and average depth from inlet to outlet 1.0m or 0.8m (maintaing slope as per site conditions) with 150 mm thick RCC M-25 walls, 150 mm thick RCC M-25 bottom slab, over 100 mm thick (Av.) levelling course in PCC M-15 including excavation, dressing of sides and bottom, providing HYSD reinforcement consisting of 10mm dia horizontal bars @150 mm c/c and U-shaped 10 mm dia bars @150 mm c/c including cutting,bending and binding wires, placing in position, providing shuttering and concreting by using cocrete mixer , compaction by vibration etc complete as per drawings and technical specifications. (i) 1.0 m width x 1.0 m average depth

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in drain/cover/chamber complete as per Drawing and Technical Specifications.

(ii) 800 mm x 600 mm rectangular

Hectometer stone (Precast)

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-1997. The finished surface to be level, uniform and free from streaks and holes.)

Meter

Meter

Removing all type of Hume Pipes in serviceable condition without damaging the pipe and Stacking with all lifts and lead excluding Earthwork and Dismantling of Masonry Works. A Up to 1000 mm dia 600mm

Sand Filling in Foundation Trenches as per Drawing & Technical Specifications.

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications. A Using concrete mixer (i) PCC Grade M15

Meter

PCC Grade M20

UOM Name

Percentage

Per mile

Siemens Per meter

Activity unit